Upload
enock
View
223
Download
0
Embed Size (px)
Citation preview
8/6/2019 Autocad 2010 Demo
1/48
AutoCadAutoCad 20102010Guide for Highway GeometricGuide for Highway Geometric
ProjectProject
8/6/2019 Autocad 2010 Demo
2/48
1:Create Surface1:Create Surface SurfaceSurface--createcreate
surfacesurface--make suremake sureto change name toto change name toxxxxx_yournamexxxxx_yourname--
Click OkClick Ok
8/6/2019 Autocad 2010 Demo
3/48
Layer ManagerLayer Manager
Turn off all layersexcept Intermediate
and Index (OrangeAve)
How to do this?
Right click light bulb
Click Select all
Turn all bulbs off
Turn on bulbs forlayers listed above(INTERMEDIATE /
INDEX)TIP: Can also access the layer
manager by typing LAYER
in thecommand line
8/6/2019 Autocad 2010 Demo
4/48
ViewView
ViewView-- ToolspaceToolspace SurfaceSurface--Surface_yournameSurface_yourname--
Definition_ContoursDefinition_Contours RightRightclick addclick add--OKOK-- Select allSelect allcontours right click.contours right click.
8/6/2019 Autocad 2010 Demo
5/48
Turn on All Layers!Turn on All Layers!How to do this?
Click on lightbulb
Right click,select all
Turn all bulbs
on
8/6/2019 Autocad 2010 Demo
6/48
2: Create Alignment2: Create Alignment
AlignmentAlignment--alignmentalignmentcreation toolscreation tools--Name asName asAlignment_ your nameAlignment_ your name
Click on Design CriteriaClick on Design Criteriatabtab
change to speed ofchange to speed ofyour choiceyour choice
click use criteria basedclick use criteria baseddesigndesign
Uncheck use designUncheck use design
criteria.criteria.
8/6/2019 Autocad 2010 Demo
7/48
Alignment layout toolAlignment layout tool
First tool on the barFirst tool on the barClick Curve and spiralClick Curve and spiralsettingssettings Click SpiralClick SpiralType of Your choiceType of Your choice
Add radius of yourAdd radius of your
choicechoice First toolbarFirst toolbar TangentTangent
-- Tangent with CurveTangent with CurveDraw your alignmentDraw your alignment
8/6/2019 Autocad 2010 Demo
8/48
Sample of AlignmentSample of Alignment
8/6/2019 Autocad 2010 Demo
9/48
3:Profile3:Profile from surfacefrom surface
ProfileProfile--Create profile from surfaceCreate profile from surface
8/6/2019 Autocad 2010 Demo
10/48
3:Profile3:Profile from surfacefrom surface
AddAdd Click SampleClick Sampleoffsets.offsets.
list in box your valueslist in box your valuesof your choice!of your choice!
Click addClick add DrawDraw--profile viewprofile view
8/6/2019 Autocad 2010 Demo
11/48
Change NameChange Name Click NextClick Next
8/6/2019 Autocad 2010 Demo
12/48
Choose Automatic or userChoose Automatic or userspecified.specified.
Choose Next two moreChoose Next two moretimestimes
8/6/2019 Autocad 2010 Demo
13/48
--Leave Center checked, butLeave Center checked, butuncheck the other twouncheck the other twosurfacessurfaces
Click Create Profile ViewClick Create Profile View Now you will be asked toNow you will be asked to
Insert profile. Please doInsert profile. Please dothis below drawing!!!this below drawing!!!
8/6/2019 Autocad 2010 Demo
14/48
Profile from surfaceProfile from surface
8/6/2019 Autocad 2010 Demo
15/48
4: Profile4: Profile
ProfileProfile-- Profile Creation ToolsProfile Creation Tools Click on your actual profileClick on your actual profile
8/6/2019 Autocad 2010 Demo
16/48
Change name-design-same settings as above.
8/6/2019 Autocad 2010 Demo
17/48
Profile layout toolsProfile layout tools--curve settingscurve settings--parabolicparabolic-- use a K value of your choiceuse a K value of your choice
Draw tangent with curves.Draw tangent with curves.
Can see Profile Grid View (On toolbar)Can see Profile Grid View (On toolbar)
8/6/2019 Autocad 2010 Demo
18/48
Profile by LayoutProfile by Layout
8/6/2019 Autocad 2010 Demo
19/48
5: Assembly5: Assembly
AssemblyAssembly -- CreateCreateAssemblyAssembly change namechange name
Click ok, Click on openClick ok, Click on openspacespace
8/6/2019 Autocad 2010 Demo
20/48
Click on assembly and the toolClick on assembly and the tool
palette for assembly will appearpalette for assembly will appear
8/6/2019 Autocad 2010 Demo
21/48
Click on Tool PaletteClick on Tool Palette
8/6/2019 Autocad 2010 Demo
22/48
8/6/2019 Autocad 2010 Demo
23/48
8/6/2019 Autocad 2010 Demo
24/48
Final Product of the AssemblyFinal Product of the Assembly
8/6/2019 Autocad 2010 Demo
25/48
6: Generating a Corridor6: Generating a Corridor
CorridorCorridor createcreatecorridorcorridor
then click enterthen click enter
(follow steps on(follow steps oncommand line)command line)
choose alignment,choose alignment,profile, andprofile, andassemblassembl
8/6/2019 Autocad 2010 Demo
26/48
Set TargetsSet Targets
8/6/2019 Autocad 2010 Demo
27/48
Select Click here to set all,Select Click here to set all,
then choose your surfacethen choose your surface
8/6/2019 Autocad 2010 Demo
28/48
ChangeChangefrequencyfrequency
to 100to 100
8/6/2019 Autocad 2010 Demo
29/48
8/6/2019 Autocad 2010 Demo
30/48
CorridorCorridor
8/6/2019 Autocad 2010 Demo
31/48
7: Create corridor from surface7: Create corridor from surface
RIGHT CLICK theRIGHT CLICK thecorridorcorridor-- select corridorselect corridorpropertiesproperties
8/6/2019 Autocad 2010 Demo
32/48
Go to surfaces tabGo to surfaces tab-- click create corridorclick create corridor
surfacessurfaces
8/6/2019 Autocad 2010 Demo
33/48
Change name toChange name to Corridor_yourCorridor_yourname_topname_top
Chose render materialChose render material
Select paving surfacing asphaltSelect paving surfacing asphalt
Select overhangSelect overhang-- selectselect toplinkstoplinks
Specify codeSpecify code-- add TOPadd TOP
Repeat for Datum, Pave, and MedianRepeat for Datum, Pave, and Median
8/6/2019 Autocad 2010 Demo
34/48
8/6/2019 Autocad 2010 Demo
35/48
For more detailed directions seeFor more detailed directions see
tutorial page 327.tutorial page 327.
Tutorial is found on helpTutorial is found on help
8/6/2019 Autocad 2010 Demo
36/48
8: Create Boundary Surface8: Create Boundary Surface
Click on the corridorClick on the corridor--right click corridorright click corridorpropertiesproperties
Go to Boundary TABGo to Boundary TAB
8/6/2019 Autocad 2010 Demo
37/48
Right Click on the Nameselect AddRight Click on the Nameselect AddAutomaticallyAutomatically-- daylightdaylight outside boundaryoutside boundary
Add outside boundary daylights to theAdd outside boundary daylights to the
Top, Datum, Pave and MedianTop, Datum, Pave and Median Click okClick ok
8/6/2019 Autocad 2010 Demo
38/48
9: Create Sample Lines9: Create Sample Lines
SectionsSections--createcreatesample linessample lines
Change nameChange name
Go to surface, goGo to surface, go
to style, changeto style, changeto exist. Groundto exist. Ground
Change theChange thesecondsecond[standard]one to[standard]one to
all codesall codes Change rest toChange rest to
finished gradefinished grade
8/6/2019 Autocad 2010 Demo
39/48
8/6/2019 Autocad 2010 Demo
40/48
Sample lines continuedSample lines continued
Then on sample line tools (toolbar toThen on sample line tools (toolbar tothe top )the top )
DropboxDropbox--from corridor stationsfrom corridor stations
Left swath and right swath change toLeft swath and right swath change to150.150.
Click okClick ok
8/6/2019 Autocad 2010 Demo
41/48
10: Create Section Views10: Create Section Views
SectionsSections-- create multiple sectionscreate multiple sections
8/6/2019 Autocad 2010 Demo
42/48
Cross SectionsCross Sections
8/6/2019 Autocad 2010 Demo
43/48
11: Quantity Takeoff ofVolumes11: Quantity Takeoff ofVolumes
SectionsSections -- compute materialscompute materials
Alignment and selected sl group okAlignment and selected sl group ok
Be sure quantity takeoff item is setBe sure quantity takeoff item is setto earthworkto earthwork
Click on EG under Object NameClick on EG under Object Name
set to your name surfaceset to your name surface
click on datum under object nameclick on datum under object name set to datum corridorset to datum corridor
8/6/2019 Autocad 2010 Demo
44/48
8/6/2019 Autocad 2010 Demo
45/48
SectionSection Generate Volume ReportGenerate Volume Report
sectionsection -- generategeneratevolume reportvolume report click okclick ok
select style sheet asselect style sheet as
earthworkearthwork can display as xml reportcan display as xml report
or notor not--click okclick ok
SectionSection--create mass haulcreate mass hauldiagramdiagram
Change nameChange name -- NextNext
8/6/2019 Autocad 2010 Demo
46/48
8/6/2019 Autocad 2010 Demo
47/48
Toolspace..settings,Toolspace..settings,
sectionsection labellabel
stylesstylesgradegradebreakbreakEG stations,EG stations,
right click editright click edit--
generalgeneral--labellabel-- changechangeto falseto false
12: Modifying crosssection labels tip:
8/6/2019 Autocad 2010 Demo
48/48
The EndThe End
Questions?Questions?