AUTO-SHOWROOM DOORS100-S series 2 1/4” l 135-S series 3 11/16” l 150-S series 5”

Manko’s auto-showroom doors are designed for Car Dealerships, Museums, or any other commercial building application where large opening access is required. These doors are offered in narrow stile, medium stile, and wide stile configurations. When combined with optional rails and intermediates (horizontal and/or vertical), our door systems are flexible enough to meet most design and hardware requirements. The availability of multiple glazing stops allow for the use of a broad range of glazing products. All storefront doors utilize a telescoping mortise and tenon joint coupled with a horizontal shear block. The joints are then further reinforced with a 3/8” steel tie rod and sleeve. This tripled redundancy ensures structural integrity and long term durability. Welded corner construction is also available upon request. Anti Terrorist Force Protection (ATFP) certification can be obtained using these systems (consult factory for details).

FEATURESStructurally tested per •ANSI/AAMA 1013-way corner •construction (welded upon request)Horizontal and vertical •midrail options3/16 ” to 1” glazing •infills6063-T5 or 6063-T6 •aluminum alloy125 or .187 wall •thickness1 3/4 ” or 2” face •dimensionsAdjustable glass •setting blocksDouble adjustable •astragals with poly-pile weathering on pairsStandard 1” round •offset push-pullsOffset pivots, butt •hinges, center pivots or continuous geared hinges optionsMaximum security •dead boltsDoors will accomodate •most hardware typesFull range of anodize •finishesFull range of •architectural painted finishesSpandrel and •composite glazing panelsIntegral structural •thermal barrier on 135-I and 150-I series

Please visit:www.mankowindows.com

for more information