Australia - ANCON Betonanconbeton.com/wp-content/uploads/2017/06/FINAL-Full...The S-15R Laser Screed® concrete-leveling machine screeds 18m2 per pass with a 6.1 metres telescopic

Page

1LEADING PRACTICAL CONCRETE SOLUTIONS

Greetings to all!

Being involved in the construction industry is

both a great opportunity and challenge!

ANCON is now more than 20 years old!

ANCON initially started in 1996 as concrete

construction consultants. In 2004, it expanded its

horizons to become representatives for Somero

Enterprises Inc., suppliers of Somero Laser Screeds and also representing

Allen Engineering, Suppliers of construction equipment. These representations

have continued successfully.

In early 2017, a decision was made to separate consultancy and equipment

representation and sales.

As from 1st April 2017, consultancy services are provided by a company

named “Concrete Methods” with its main consultants to be Robert Landorf

and Peter Killeen. A cooperative relationship remains with ANCON.

Equipment representation and sales remains with ANCON with the same

ANCON Team in Australia, New Zealand and South East Asia including

Thailand, Vietnam, Singapore, Malaysia, Philippines and Indonesia. This new

structure allows ANCON to focus on its main bunsiness and supporting its

equipment customers and building relationships.

Our representative team is presented on a separate document and on our

website at www.anconbeton.com

Best regards,

Ian Burnett

Managing Director

ANCON Beton PTY LTD

CONTENTS

Concrete Floor Consultancy 2-6

Floor and Pavement Projects 2

ANCON Floor Package 3-6

SOMERO® 7-16

S-22E Laser Screed 7

S-15R Laser Screed 8

S-10A Laser Screed 9

S-940 Laser Screed 10

S-485 Laser Screed 11

Copperhead XD3.0 Laser Screed 12

Power Rake 3.0 12

Mini Screed C 13

SP-16 Concrete Hose Puller 14

3-D Profiler System 15

SITESHAPE System 15

Support Kits 16

ALLEN® 17-29

Truss Screed 17

Magic Screed 18

Triple Roller Tube Pavers 19

Work Bridges 20

HDX600 Ride-on Trowel 21

MSP455 & MSP 445 Ride-on Trowel 22

MP235 & MP215 Ride-on Trowel 23

Walk-Behind Trowels 24

Pans and Blades 25

Power Sprayer 26

Hand tools 27

Marshalltown® Hand tools 28

Wagman Revolution Rotary System 29

BARTELL GLOBAL 30-32

Morrison Material Spreader 30

SPE Shotblasters & Scarifiers 31

SPE Edge Grinder 32

Innovatech Planetary Grinder 32

ANCON Equipment Accessories 33

ANCON Warehouse and Customer Service 34

MD Message

Page

2www.anconbeton.com

FLOOR AND PAVEMENT PROJECTS

Qantas Stores Facility

Australia

Bunning’s Stores

Australia

Baulderstone, Brisbane Airport

Australia

Masters Store Springfield,Brisbane, Australia

Diary Giant Warehouse

Kuala Lumpur, Malaysia

MSAS Project

Penang, Malaysia

Drag Strip

Perth

OKH Holdings

Singapore

Trung Dung Constructions

HCMC, Vietnam

Nestle Factory

Manila, Philippines

BSY Constructions

Thailand

Boustead Project

Singapore

Page


What is a BAD FLOOR?

What is an ANCON FLOOR?

This floor was cheap to build however it is very expensive to repair and maintain. The total cost of this floor after rectification is much higher than the cost of an “ANCON Floor.”

The floor defects are:• Low Surface Quality and High Abrasion

• Not Flat or Level

• Delamination Defects

• Higher Surface Abrasion

• Poor and inefficient for Operator• High Maintenance Costs

• Poor Joint Performance

The “ANCON Floor” is defined as:• Flat & Level

• Burnished with High Quality Surface or hard trowel finish• High Abrasion Resistance

• Shake-On Hardener or no Shake-On Hardener

• Far Less defects

• Less Rectification Costs• Fast Track Program

• Most Economical Construction Method

• Joints square and level for smooth transition

Essential Elements of the “ANCON Floor”

1

2

3

4

5

Application of World’s Best Construction Practice – “ACI Standards”

A Rigid Construction Process is Followed

Latest Technology

Good Quality Materials - The Concrete Mix

World’s Leading Construction Equipment

Retail Floor Australia

Multi Level Warehouse floor, South East Asia

ANCON FLOOR PACKAGE (FOR SE ASIA ONLY)

Page

4www.anconbeton.com


Specification Advice Edge

FormworkJoint Advice

Technology - World’s Best

Practice

World’s Best Equipment

Concrete Supply & Mix

Consultancy

Measurement

Curing

TrowellingSupervision, Trained &

Experienced

Level & Strike Off with Laser Screed

GREAT QUALITY

The Process Steps and Outcomes

ANCON tailors packages of project

management and floor construction consultancy combined with the right

equipment to meet the needs of each

customer and project.

ANCON has consulted, project managed

and trained on approximately 1,000 sites

in Australia, New Zealand and South East

Asia over the past 18 years. ANCON’s vast

knowledge and experience enables its team

to advise and deliver quality results to its

customer.

Warehouse Floor Melbourne Australia

ANCON FLOOR - The Process Segments

Page


Essential Parts 0f the Process

IMeet with the customer and establish needs for immediate project and future projects.

IISpecify equipment needs by way of:• Screeding and Leveling Equipment

• Hand Tools and Straightening Tools

• Finishing Machines

III

Measuring Equipment for Flatness and Levelness to ACI Standards

IV

Be at the jobsite location to train, and coach the

contractors chosen “ANCON Floor” team to:

• Assemble Equipment

• Use the Equipment

• Clean the Equipment

• Trouble Shoot the Equipment

• Service the Equipment

V

Send a Senior Floor Consultant to site to train and coach the contractors chosen “ANCON Floor”

team to complete the process of floor construction including but not limited to:• Formwork Set-Up

• Pump Set Up

• Concrete Placing

• Concrete Rough Leveling

• Concrete Fine Leveling

• Use of Straightening tools to cut off the “bumps”

• Walk-behind trowels to open the surface

• Ride on Trowels with pans method

• Ride on Trowels with blades for finishing• Application of curing compound

• Floor Flatness and Levelness Measurement

• Measure floor with Dipstick• Prepare report to ASTM 1155 & ACI 117 requirements (as well as TR34).

ANCON Training Southeast Asia

ANCON Coaching Southeast Asia


Page

6www.anconbeton.com

The ANCON FLOOR SYSTEM is:-

• Flat

• Level

• Hard

• Defect Free

• Looks Good

• Almost Nil Maintenance

• Best Value for Money

The ANCON FLOOR is accomplished by ANCON assisting the following:

• Establish Customer Needs

• Concrete Mix Review and Trial Mixes

• Supply Equipment including Somero Laser Screeds and Allen Engineering

Walk-behind, Ride-on Trowels, Hand Tools and Straightening Tools.

• Face Construction Technologies USA Dipstick

• Equipment Trainer on site for 5-7 days

• Floor Construction Consultant on site for 5 -7 days

ANCON will prepare a Floor Package to meet your needs!!!

ANCON has successfully delivered packages in:• Singapore

• Thailand

• Vietnam

• Indonesia

• Malaysia

• Australia

• New Zealand

• Fiji

• New Caledonia

An example of the “ANCON Floor” system supplied to Bangkok, Thailand

Retail Floor Brisbane AustraliaWorld Class Floor


Page


The S-22E Laser Screed® is the latest machine from Somero®. The S-22E allows the contractor to have even more control and

options than ever before. By having this option to build your own laser screed® model your way.

Features and Benefits• Improved floor quality• Full color soft touch LCD display with integrated diagnosis

• Somero Floor Levelness System® (optional)

• Column-Block Protection

• OASIS Laser Control System

• 360° Machine Rotation with 2-wheel, 4-Wheel and Crab Steering

• Somero Quick GradeSet System™

• Hydraulic oil pre-heater

• Heated seat, hand and foot areas

• Automatic throttle

• Automatic soft landing

• Programmable Quick Pass

• Compatible with the 3-D Profiler System®

Model S-22E

Overall Width 4.3m at screed head

2.2m at outside of tires

Overall Length 8.4m (transport mode)

Overall Height 2.5m top of seat back

Operating Weight (kg) 6,169 Kg (Base Machine)

6,622 Kg (With All Options)

Boom Reach (m) 6.10

Screed Head Size (m) 4.3 / 3.7 (optional)

Engine 65 HP / 48.5 kW Cummins Diesel QSS 2.8, Tier

4 Final

Grade Control System Open Architecture SOMERO® Integrated System

(OASIS)

S-22E Laser Screed® Model Support Kit

(For details, refer to page 50)

S-22E Laser Screed® equipment on

the job

Optional Features

• 3.6m or 4.3m Roller Plow

• Hydraulic Pressure Washer (3,000 PSI | 207 bar)

• Extra Lower-Frame Storage Compartment

• Powered head rotation on the end of the boom

• Tire option

• Spare parts kits

S-22E

Page

8www.anconbeton.com

S-15R

Model S-15R

Dimension - L x W x H (m) 6.25 x 2.21 x 1.93 (w/o masts)

Operating Weight (kg) 4,377

Boom Reach (m) 6.10

Screed Head Size (m) 3.00 or 2.4 (optional)

Engine 44.3HP (33 kW) Mechanical Naturally Aspirated Kubota Diesel

Grade Control System Open Architecture SOMERO® Integrated System (OASIS)

S-15R Laser Screed® equipment on the job

S-15R Laser Screed® Model Support Kit


The S-15R Laser Screed® concrete-leveling machine screeds 18m2 per pass with a 6.1 metres telescopic boom reaching out over

the concrete. The powerful hydraulic system controls the elevation of the plow and auger to maintain grade so you can get a much

smoother surface as compared to rigid mounting style machines, even with very low slump concrete!

The S-15R is 3 metre wide at the stabilizers, with fully integrated head assembly plows, levels and consolidates in a single automated

pass. The plow rakes down high concrete filling in low spots and the Somero® Quick Pass feature rakes down excessively high

concrete without manual intervention. The hydraulically driven auger cuts the surface to grade and displaces excess concrete to the

side via a double flight auger and the offset head design minimizes side overlap. An electric vibrator saves weight and applies equal harmonics across the entire vibrator width. The S-15R is a high performing and sophisticated machine with great value.

Additional features of the S-15R are:-

• 360° powered machine rotation


• 4 wheel, crab steering

• 4 Stabilizers in-line with wheels

• Flip-down plow extension

Page


S-10A

S-10A Laser Screed® equipment on the job

NEW FEATURES:

• New 3 metres screed head allowing for 18.6m2 per pass

• Operator positioned in centre of machine for optimum operator sight line

• 6.1 metre boom

• Customised OASIS Laser Control System


• Easily transported on a truck or trailer

Model S-10A

Dimension - L x W x H (m) 21.7 x 2.0 x 2.1

Operating Weight (kg) 3,515

Boom Reach (m) 6.10

Screed Head Size (m) 3.0

Engine 35.0HP (26 kW) Kubota Diesel Engine

Grade Control System Open Architecture SOMERO® Integrated System

(OASIS)

S-10A Laser Screed® Model Support Kit

The all new S-10A has been engineered for productivity and convenience. It is compact in size at just 3,515kg, but highly productive.

With a 6.1 metre telescopic boom and our patented, fully automated, self-leveling 3 metre screed head, the S10A allows customers

to screed 18.6m2 per pass. Due to its light weight, the S-10A can be transported on either a flatbed truck or a tow behind trailer.

The S-10A has operator’s convenience unmatched in the industry. The Somero Quick Grade Set SystemTM enables the operator

to easily and accurately set grade in minutes. With only two steps, the operator can easily assesses the centrally located operator

platform for direct line of sight to the pour while screeding and the OASIS Laser Control System from Somero allows the operator to

fine tune and calibrate the machine without leaving the operator area.

Page

10www.anconbeton.com

S-940

The S-940 provides unmatched versatility and simplicity with increased power and productivity! Available with a fully automated self-

leveling screed head, raking/fine grade head, this powerful machine has fewer switches and an easy-access hinged console, making any job comfortable for your operator. This machine features an auger.

It has a foldable elevation beam that provides a narrower profile during transport with the added benefit of providing easy entry to jobsites. The off-set screed head provides less of an overlap per pass. With the option of a powerful diesel engine, this model is

unstoppable.

Model S-940

Height 5’ (1.5m)

Weight (Gas Engine) 1,653 lbs (750kg) - with 10’ head

Weight (Diesel Engine) 1,775 lbs (805kg) - Diesel engine with 10’ head

Length 11’ (3.35m)

Width 4’9” (1.45m) - Transport Mode

Head Size 10’ (3m); 11’3” (3.4m) with Auger Motor

Head Clearance 14 1/2” (.37m)

Ground Clearance 10 3/4” (.27m)

Standard Tire Ground Pressure 34 psi (234.4 Kpa)

ATV Tire Ground Pressure 10 psi (68.9 Kpa)

Engine Options Subaru EH65 (22hp-16Kw) or

Kubota DH 902 Diesel (24.8hp-18Kw)

Fuel Capacity 4 Gallons (15L)

Grade Control System OASIS (Open Architecture Somero Intergrated System)

Elevation Control Dual Hydraulic Cylinders with Somero Quick GradeSet System TM

S-940 Laser Screed® Model Support Kit

S-940 Laser Screed® equipment on the job

Page


S-485

This ride-on S-485 Laser Screed® model does more than just screed concrete, it also rakes to three operated controlled Somero®

Quick Pass levels. This is just the beginning of what this machine can do for the contractor. The S-485 Laser Screed® machine is the

right machine for contractors who want better performance when you encounter difficult applications such as:-

• Slab-on-Grade or Slab-on-Deck

• Compatible with the 3-D Profiler System® (optional)

• Chaired Rebar or Mesh or Fibres

• Warehouses

• Factories

• Shopping Centres

• Hard Stand Pavements

The benefits of the S-485 include:-• Incredible Pulling Power

• Easy to Operate

• Stand on Ride on operation

• OASIS Control System

• Simple, Fast and Accurate Grade Set-up

• Lightweight and Versatile

• Screed in Any Direction

• 4-Wheel Drive

• Utilise as a Laser Screed or Laser Controlled Rake

• Utilises Somero’s Proven Technology

Model S-485

Dimension - L x W x H (m) 2.99 x 2.57 x 1.29 (at head)

2.99 x 1.10 x 1.29 (at wheels)

Operating Weight (kg) 493

Engine 20.8 HP (15.5kW) – HONDA GX630

Start Electric Start

Control Manual throttle and choke with electric shutoff

Propulsion 4-wheel drive with hydraulic drive motors

Screed Head Width (m) 2.46 or 1.8m (Rake / Sub-Grade Head)

Ground Pressure 22 psi (28 kPa)

S-485 Laser Screed® equipment on the job

S-485 Laser Screed® Model Support Kit

Page


Copperhead® XD 3.0TM

The CopperHead® XD 3.0TM equipment uses Somero® Patented Laser-

Leveling Technology to cut the concrete to a finished grade, screed it flat, and vibrate it smooth in one pass. You will be able to work faster because

the CopperHead® XD 3.0TM sets grade automatically, allowing the operator

to move quickly and efficiently through the work area.

Model Copperhead® XD 3.0TM


Screed Head Options (m) 2.4 / 3.0


Ground Pressure:STD Tire: PSI (kPa) 29.4 (197)

Hi-Float Tire: PSI (kPa) 4.1 (28.7)

Engine Options SUBARU EX40 14.0HP (10.4kW) Petrol Engine (Standard)

HONDA 13.0 HP (9.6 kW) Petrol Engine (Optional)Copperhead XD 3.0TM Laser Screed®

equipment on the job

PowerRake® 3.0

Model PowerRake® 3.0

Dimension - L x W x H (m) 2.65 x 2.13 x 1.64 (at head)

2.65 x 1.01 x 1.64 (at wheels)


Ground Clearance (m) 0.29

Engine Options HONDA GX630 20.0 HP (14 kW)

*Diesel Option available

Start Electric Start with Secondary Pull Cord

Control Manual Throttle & Choke with Electric shutoff

Propel 4 Wheel-drive with Hydraulic Motors

Plow Elevation Control Laser Control of Head via Head Lift Cylinders

Head Lift 3.8cm Hydraulic Cylinders and Manual Electric Switch

Steering Control Proportional joystick and valve driving a Hydraulic Cylinder

Propulsion Control Proportional joystick and valve driving Hydraulic Motors

The PowerRake® 3.0 innovative and patented design was developed to allow a single operator the ability to rake more concrete in

less time, with no manual labor. The ride-on design is a proven labour-saving device and takes the back-breaking work out of raking

concrete.The PowerRake® 3.0 with a quieter yet more powerful engine allows the operator to ride on the machine and rake the

“dumped” concrete down to grade to +/-6.35mm accuracy, ready for fine levelling and screeding.

Page


Mini Screed™ C

The Mini Screed™ C provides superior producitivity and levelness on all types of job applications. Small commercial, upper deck and

residential projects can now have the same high quality, professional Laser Screed® floors that you only expect on a large commercial project. Save on yield and reduce manual efforts on placements while improving floor quality.

Mini Screed™ C Applications:• Slab-on-Grade & Elevated Deck

• Post Tension

• Rebar

• Chaired Mesh

• Metal Deck

• Radiant Floor Heating

Model Mini Screed™ C



Tires (m) 0.64 x 0.20 x 0.36

Engine 6.0 HP (4.47kW) ROBIN 4-Stroke Petrol Engine

8.0 HP (5.9kW) HONDA GX240 Petrol Engine

Laser Controls Trimble SSR Receivers

Auto Level Standard

Self propel Standard

Vibrator Soft Start Standard

Screed Head Size (m) 1.8

Mini Screed™C on the job

Mini Screed™C Support Kit


Page


SP-16 CONCRETE HOSE PULLER

Somero’s SP-16 has revolutionized the efficiency of operating concrete pump hoses. Featuring remote-controlled hose handlers, the SP-16 Line-Pulling and Placing System is equipped with powerful engines, in addition to load-sensing and variable-displacement

hydraulics, that move lines with ease.

Besides being the most nimble concrete placing machine on the market, this concrete hose pulling machine is sure to enhance

productivity, create labor savings, and reduce the risk of injury associated with moving concrete pump hoses by hand.

Enter the next generation of concrete placing equipment with Somero’s SP-16. Your concrete delivery lines will never be the same.

Features and Benefits

• Remote-control operation utilizes simple AA batteries

• Intelligent Steering adjusts steering angle to prevent stress

and damage to components

• Steering capabilities include two-wheel, four-wheel, and crab-

style options

• Load-sensing variable-displacement hydraulics provide

optimal power

• Return-to-center steering automatically realigns wheels

• Conveniences include LED work lights, tie-down points for

transport, and various clamping locations

• Jobsite safety is increased

Model SP-16

Length (m) Puller: 1.4 Placer: 1.7Width (m) 1.3

Height (m) Puller: 1.1 Placer: 1.1Operating Weight (kg) Puller: 471.7 Placer: 521.6Ground Clearance (m) 0.178-0.184

Steering Angle 180 deg

Engine 11.7 HP (8.7kW) HONDA GX390 Petrol Engine

Tires (Standard) Carlisle 18 x 8.5

Clamp Opening (mm) 10.22

SP-16 Concrete Hose Puller on the job

Page


3-D Profiler System®

The Somero® 3-D Profiler System® is a technological breakthrough which allows concrete to be placed over contoured sites (shaped

like a golf course) automatically using a Somero Laser Screed®. The highly accurate screeding of concrete, until now restricted to

single and dual plane applications, is now available to meet the demands of real 3-dimensional paving.

Concrete paving is a multi-billion dollar market and gaining

momentum. A great opportunity exists for Laser Screed®

equipment owners to capitalize by expanding services to

include concrete paving. It can double the use of the S22E,

SXP-D, S-15R and S-15m Laser Screed®.The 3-D Profiler System® is ideal for use on parking lots, loading dock areas,

service ramps, and driveways. It’s also being used to white

top and repair roadways, runways, taxiways, and bridges.

Slope and elevation changes are now completely practical

and cost effective to achieve.

The 3-D Profiler System® is easy to learn and use. It is

compatible with all of the latest Laser Screed models such

as the Copperhead, S-840 and the Mini-Screed C and it is

also adaptable to earlier models .

The 3-D Profiler System® comes complete with all necessary

components to get you profitably paving right away.

Ever wish that you could have the simplicity of the Somero® 3-D Profiler System® for your motor grader? Now it’s possible with SiteShape™,

which takes the same field-proven technology and adapts it to simplify your fine-grading applications.

This system allows for grade shaping automatically using your motor

grader, dozer, or other grading machine to meet the demands of real

three-dimensional grade shaping.

Ideal for use on parking lots, loading dock areas, service ramps, and

driveways – it can also be used on roadways, runways, taxiways, or

any multi-sloped surface. Slope and elevation changes are now simple,

practical, and cost-effective to achieve. The SiteShape™ System is

compatible with most makes and models of grade cutting machines.

The system uses most components of the 3-D Profiler System®

SITESHAPETM System

Page


SOMERO SUPPORT KITS

S-22E EMERGENCY SPARES KIT

Guard Auger Bearing Seal, Vibrator Bearings, Vibrator Motor, Compression Springs, Auger Motor, Auger Bearings,

Hydraulic Return Filter, Hydraulic Pressure Filter, Angle Sensor, LR210 Laser Receiver, GCS21 DCB (only for

GCS21 equipped SXP-D), Oil Filter, Air Filters, Fuel Filter, Fan Belt, Rocker Switches, Boom Cord, 8ft Coil Cable,

Various Valves & Cartridges, Stabilizer/Steer/Auger Pressure Comp, Pod Bearings, Centaflex Element, Coupling Jaws CSV, Red Spider CSV, Snap Ring, Fiber Washer, Boom Roller Bearings, Multimeter, Hydraulic Pressure

Sensor, Stabilizer/Steering Sensor Cable.

S-15R EMERGENCY SUPPORT KIT

SSR2 Receiver, AS212-S Angle Sensor, AS212-S Cable, SSR2 Coil, Boom Coard, Head Lift/Oscillation Valve,

Auger Motor, Auger Bearing, Seal Guard, Auger Bearing Guard Spring, Vibrator Motor, Vibrator Isolators, Deadman

Switch, Thumb Switch, Rocket Switches & Covers, E-Stop Assembly, Paddle Switch, Hydraulic, Engine Oil & Fuel

Filters, Air Filters, Fan Belt, Stabilizer Catridge, Multi Meter, Ball Joint, Cotter Pin, Keyway

S-10A EMERGENCY SUPPORT KIT


Auger Motor, Auger Bearing, Auger Seal, Compression Springs, Vibrator Motor, Vibrator Isolators, Emergency

Cord, Cotter Pin, Cotter Pin Loop, Grease Fittings, Split Ring, MP Filter Element, Pressure Gauge, Drive Seal, In-

ner Tube, Deadman Switch, E-stop Assembly, Paddle Joystick, Spark Plug, Rocker Switches and Covers, Relays,

Timed Lower Thuumb Switch, Pin assemblies, Multimetre, Hydraulic Hoses

S-940 EMERGENCY SUPPORT KIT






S-485 EMERGENCY SUPPORT KIT






COPPERHEAD XD 3.0 EMERGENCY SPARES KIT

SSR Control Box, SSR Receiver, PQ Sensor, Plow Linear Actuator, Limit Switch Assembly, Side Lock Cylinder,

Vibrator Motor, Air Filter Element, MP Filter Element, Spark plug, Vibrator Bearings, Bushing (Lift Arm), Clamp As-

sembly, E-Stop Assembly, Rocker Switches & Covers, Inner Tube, Actuator Cords, Coil Cord to SSR Control Box,

Relays, SSR Clamp, Vibrator Cover Knobs, Rubber Seals Drive Guard, Multimeter, Vibrator Isolators, Operator

Presence Switch.

MINI SCREED C EMERGENCY SPARES KIT

SSR Control Box, SSR Receiver, PQ Sensor, Head Lift Linear Actuator, Plow Linear Actuator, Coil Cord to SSR

Control Box, Vibrator Motor, Vibrator Isolators, Air Filter, Rocker Switches & Covers, Spark Plug, Receiver Pole

Clamp, Rubber Seals Drive Guard, Hex Bit 1/8, Emergency Stop Assembly, Relays, Multimeter.

POWER RAKE EMERGENCY SPARES KIT

SSR Control Box, SSR Receiver, PQ Sensor, Head Lift Linear Actuator, Plow Linear Actuator, Coil Cord to SSR

Control Box, Vibrator Motor, Vibrator Isolators, Air Filter, Rocker Switches & Covers, Spark Plug, Receiver Pole

Clamp, Rubber Seals Drive Guard, Hex Bit 1/8, Emergency Stop Assembly, Relays, Multimeter.

Page


*Hydraulic Powered Winch (Optional)

The Allen® Razorback® Truss Screed is the contractor’s preferred brand when high tolerance FL Numbers are specified on concrete floors and pavements. For more than 35 years, Allen Truss Screeds have set the industry’s standard for precision levelness, rigidity and durability. Allen Engineering has a full line of truss screed models and accessories.

FEATURES:

• Quick Disconnect System

• Low Profile Engine Option

• Wide Range of Horsepower Options

• Hydraulic Powered Winch is Optional

• Manual Winch is Standard

• Bolt-On Replaceable Blades

• Triangular Frame with Vibration Proof Welds

• Eccentric Vibrator Weights

• Replaceable, Greaseable Bearings

• Tough, strong and DurableWith Engine Options ranging from 9 hp to 11 hp, there’s a Steel Screed for virtually Every Size

Floor Finishing or Paving Operation

Accessories & Options Available for the SE12

Air Screed Option Available Bridge Deck Handle Adjustable End Brackets

Pivot Brackets

SE12 RAZORBACK® SERIES STEEL TRUSS SCREED

Invert crown bracket for

air screed shown

Page


MAGIC SCREED®

The Magic Screed is a precision engineered, lightweight wet screed for single operator strike-off of concrete. Fast and easy to use, this

high-frequency screed provides uniform distribution over the entire blade length, enhancing structural integrity of the concrete through

consolidation.

Available Width (m)

Weight

(kg)

1.22 3.0

1.83 4.0

2.44 6.0

3.05 7.0

3.66 9.0

4.27 11.0

4.88 12.0

Model HD7070

Engine Honda™ GX35

4-Stroke 35cc

Handles Adjustable

Weight (kg) 13.5

FEATURES:

• Smooth Operating Throttle

• Lightweight, but Powerful Honda™ Engine

• Ergonomically Designed Grips and 360-degree adjustable handles

• Tilt-Up StandaAnti-Vibrating System to focus vibration on the blade, not

the handle

• Quick-Change Screed Blade with unique design

• Carrying Bar for every job movement

Quick-Change Blades Unique, patented blade

Magic Screed® on the job

Handles can be adjusted for height, twisted to the inside or outside and have the angle adjusted for maximum ergonomic support.

Page


TRIPLE ROLLER TUBE PAVERS

Allen Triple Roller Tube Pavers (TRTP) are specifically designed for paving large projects fast, accurately and efficiently. These pavers are not only the best engineered for their tasks, they’re the best value. Allen is so confident in their Paving Equipment that they back them with a One Year, 100% Satisfaction Guarantee! Available in a variety of standard configurations, Allen will also customize their equipment to fit your specific paving projects.

Precision engineered tubes ensure the smoothest pavement possible. Powered by rugged Diesel Engines, with easy to operate

control systems, the Triple Roller Tube Paver can strike off concrete fast. And with Allen’s precision engineered and level-tested roller

tubes, you can be assured of producing the flattest paving job possible.

FEATURES:

• Operational Gang Vibration System for up to 610mm deep

concrete consolidation

• Vibrator Head Diameter: 60 mm

• Vibrator Head Length: 600 mm

• Three Super-Flat Roller Tubes

• Vibrator Spacing: 610mm center to center with radius of effectiveness up to 480mm

• Water Spray System keeps Tubes clean and smooth

• Pendulum Shaft Driven Vibrators can be adjusted from 0-11,000

VPM from operator console

*Shown with Vibration System

255CD on the job

Model 255CD

Engine 32HP Kubota® Diesel (3.7m-6.0m)

44HP Kubota® (6.7m-10.4)

Widths Available

(600mm Increments)

3.6 - 10.4m

Weight at 6.7metre (kg) 2,526

Roller Tube Diameter (mm) 255

Tube Weight Per 300mm (kg) 12

Hydraulic Oil Reservoir (litre) 95.0

Hydraulic Spray System Standard

Hydraulic Steering Leg Standard

Page


WORK BRIDGES

Allen Work Bridges are available in several sizes. Allen Work Bridges can be customized for every application. These work bridges

are ideal for joint work, applying curing compounds, bull-floating, applying textures or whenever bridging is required. The Allen Work Bridge is an economical workhorse on any job site.

Non-Powered Model WB1224

Frame Dimension D x W (mm) 300 x 610

Max. Machine Length (m) 20

Available Sections (m) 2.28 / 1.52 / 0.61

Telescopic Sections N/A

Powered Model PWB1824 PWB2434

Engine Honda® GX270 (270cc) Honda® GX270 (270cc)

Frame Dimension D x W (mm) 46 x 61 61 x 86

Max. Machine Width (m) 32.0 36.5

Available Sections (m) 3.66 / 1.83 / 0.91 3.66 / 1.83 / 0.91

Telescopic Sections (m) 4.57 – 7.62 4.57 – 7.62

Paving Wheel Attachment Option

*WB1224 with pneumatic tires

(foam filled tires optional)

Bridge Deck Wheel Attachment Option

Page


HDX600 RIDE-ON TROWEL

Designed to satisfy the most demanding concrete contractors, the Allen HDX600, Hydraulic-Powered Riding Trowel is packed with

the punch of a high-horsepower diesel engine and is the most powerful rider in its class and also one of the most dependable.

With ideal weight to horsepower ratio and hydraulic components (including a patented automatic load sensing device), the HDX600

ensure a peak performance every time.

Model HDX600

Engine 44HP Turbo Charged Kubota Diesel


Panning Path Width (m) 2.54

Rotors Diameter (m) 1.52 (5-Bladed Spider)

Maximum Rotor Speed (rpm) 135


Fuel Capacity (litre) 41.6

FEATURES:

• Adjustable Seat and Arm Rests

• Generation III (All Hydraulic Proportional) Joy Stick

Power Steering

• Four Lights in Front and Back

• Independent Hydraulic Blade Pitch Controls

44HP Turbo-Charged Kubota Diesel Engine

Hydraulic Joy Stick Power Steering makes maneuverability smooth and easy

HDX600 in operation

*Shown with Allen Steel Pans

Page


MSP455 & MSP445

Allen’s MSP series is the most popular series in their ride-on trowel line up. You can now choose between the MSP445 (manual

steer) and the MSP455 (Power Steer). Both models offer a powerful gas engine, Super Heavy-Duty Gearboxes and Spiders to

provide a great weight to-horsepower performer for larger contractors.

The MSP445 and MSP455 are both easy to control and steer. Standard features include an electric-powered spray system and built-

in cup holder.

Both models are powered by the Kohler 40HP gasoline engine and both come with all of the standard features of an Allen ride-on

trowel.

Model MSP455 MSP445

Engine 37HP Kohler Air-Cooled Gasoline 37HP Kohler Air-Cooled Gasoline

Dimension - L x W x H (m) 2.54 x 1.28 x 1.47 2.54 x 1.28 x 1.47

Panning Path Width (m) 2.48 2.48

Rotors Diameter (m) 1.17 (5-Bladed Spider) 1.17 (5-Bladed Spider)

Maximum Rotor Speed (rpm) 165 165

Operating Weight (kg) 533 477

Steering Power Manual

Fuel Capacity (litre) 23.0 23.0

FEATURES:

• Adjustable seat that flips up for easy access• Built-In Cup Holder

• Independent Manual Pitch Control

• Light Switch, Key Switch, Hour Meter and 12 Volt

Charger All in One Location

• Detachable Front Access Panels

• Powered Spray System

• Torque Converter Clutch for True Variable Speed


• Five-Bladed Spider

• Super Heavy-Duty (SHD) Gearbox

• Hydraulic Joy Stick Power SteeringMSP445 in operation

Page


MP 235 & MP215

The Mechanical-Drive Pro (MP) Series is Allen Engineering’s entry-level rider complete with features found on the larger riders and

the renowned durability of all Allen Equipment. These riders are available in convenient sizes and are equipped with high-horsepower

gasoline engines, heavy-duty drivetrains and packed in easy-to-service frames. Allen’s Standard-Duty Gearboxes and four-bladed

rotors are proven performers in the field.

FEATURES:

• Adjustable seat that flips up for easy access• Built-In Cup Holder

• Independent Manual Pitch Control

• Light Switch, Key Switch, Hour Meter and 12 Volt Charger All in One Location

• Detachable Front Access Panels

• Powered Spray System

• Torque Converter Clutch for True Variable Speed


• Five-Bladed Spider with Super Heavy-Duty (SHD) Gearbox

• Manual Lever Steering

*Shown with Allen Steel Pans

Model MP235 MP215

Engine 26HP HondaTM GX690 Air-Cooled Gasoline (688cc) 26HP Honda™ GX690 Air-Cooled Gasoline (688cc)


Panning Path Width (m) 2.16 1.88

Rotors Diameter (m) 0.91 (4-Bladed Spider) 0.91 (4-Bladed Spider)

Maximum Rotor Speed (rpm) 145 145

Application Edging, Finishing and Panning Finishing and Panning


Fuel & Retardant Capacity (litre) 23.0 23.0

Page


PRO SERIES WALK BEHIND TROWELS

Engineered for the concrete professional, Allen® Walkers

are designed to produce high tolerance concrete floors (as measured by F-Numbers) with high-quality features that

are hard to find on other trowels.

Allen Pro-Series Walkers feature precision engineered

Allen Gearboxes for long, trouble-free life. They use cast

iron spiders, pressure plates and lift levers for long wear

and continuous service.

Allen precision machines the trowel arms and spiders to

such close tolerances that our trowels don’t need bushings.

And, their high strength steel handle provides maximum

comfort and control and ease of use.

Allen’s commitment to product quality, attention to detail

and 100% product testing ensures that your Allen Walker

will provide years of high performance and trouble-free

operation on the job.

Model PRO 446 PRO 436 PRO EDGER 436

Engine Honda™ GX270 (270cc) or

GX340 (389cc)

Honda™ GX160 (163cc)

or GX270 (270cc)

Honda™ GX160 (163cc) or

GX270 (270cc)

Honda™ GX120 (118cc)

Dimension - L x H (m) 2.26 x 0.99 1.78 x 0.97 2.13 x 0.97 1.65 x 1.09

Rotors Diameter (m) 1.17 (4-Blades) 0.92 (4-Blades) 0.92 (4-Blades) 0.61 (4-Blades)

Maximum Rotor Speed (rpm) 118 118 118 135

Operating Weight (kg) 123 101 89 55

Trowel Arms & Spiders Standard Duty Standard Duty Standard Duty Standard Duty

FEATURES:

• Fingertip Throttle Control

• Padded Handles

• Safety Switch On Handle

• Allen Standard-Duty Gear Box

• Wide Range Of Horsepower Available

• Lifting Hook

• Lifting Bar

• Torque Converter Clutch

• Stabilizer Ring

• Cast Iron Spiders, Pressure Plates And Lift

Levers

• Height Adjustable Handle

PRO446

PRO436

PRO EDGER 436VP424

Page


PANS AND BLADES

Allen Engineering pioneered the use of floating discs (or pans) on riding trowels in 1989 and Allen® Pans remain today the finisher’s choice

when high FF Numbers are specified on a concrete floor. Allen’s flat pan tolerances cut bumps and fill low spots in the concrete floor.

Insist on Allen® Steel Pans for your Allen Riders and Walk-Behinds. Made to the same exacting tolerances as the trowels themselves,

nothing finishes better.

STEEL FLOAT PANS

TROWEL BLADES

TWO TYPES OF PANS

Allen offers both Flat (0” to

1/8” dish) and Mild-Dished

(1/4” to 3/8” dish) steel pans.

This gives contractors even

more pan choices from Al-

len.

Safety Catch Pan Clip-On Pan

MADE INTHE USA

Allen Engineering offers a complete line of finish blades, combination blades and clip-on float shoes for your walk-behind or ride-on

power trowels. We use high quality steel or composite plastic with six high strength rivets to maximize blade life. For the flattest floors,

trust only Allen Finishing Blades. And, Allen Blades fit most other brands of walkers and riders.

Finish Blade Flat Finish Combination Blade Finish Blade

Plastic Silver Blue Gold

Page


POWER SPRAYERS

Allen’s powerful, reliable and durable Power Sprayers are the preferred tool

for applying release agents, water-based sealants and curing compounds on

concrete construction sites.

The continuous recirculating system ensures your material is always well mixed

and ready to spray.

Available in barrel, cart, tow or skid mount.

Model 9910 7560XL

Engine Honda™ GX160 (163cc) Honda™ GX120 (118cc)

Maximum Flow Rate (litre/min) 36.0 28.4

Pump Type Diaphragm Roller Ball

Hose Type Hydraulic 3/8”Lock-On


Barrel Mount Configuration is Standard

7560XL Shown *9910 shown with optional Tow Cart*9910 shown with optional Push Cart

FEATURES:

• Spray Gun with Fan Tip 4020 and 30.5 m (100’) of hose is standard on Sprayers.

• Foam Filled Tires optional on all carts.

• All materials must be thoroughly mixed before spraying.

• Sprayers are intended for spraying Form Release Agents, Water Based Concrete

Sealants, and Concrete Curing Compounds.

• Allen Sprayers are not intended for spraying any types of Asphalt Sealants.

Spraying of any type of asphalt sealers will cause damage to the pump and will not

be covered by warranty. *9910 Power Sprayer on the job

Page


ALLEN HANDTOOLS

Checked to exact flatness tolerances, our extruded magnesium Allen Hand Tools are specifically designed to improve floor or pavement levelness. Each tool comes standard with three 1.8 m snap-together aluminum handles. These hand tools are available

with either the Rock-It or Equalizer pitch adjusting head for precise, even control.

Bump Cutter: Cuts down bumps and fills low areas after concrete slab has been floated.

Channel Float: Use in lieu of traditional bull float for flatter floors and pavements.

Check Rod: Reduces bumps and fills low areas while the concrete is still plastic.

*Bump Cutter

*Check Rod

*Channel Float

Mesh Roller: Ideal for embedding exposed aggregate and quickly levels slab and prepared it for final finish.

*Mesh Roller

Model Tool Widths (m) Channel/Beam

Dimension

Channel Float 1.5 - 3.7 152 mm

Check Rod 2.4 - 4.9 51 x 102 mm

Bump Cutter 2.4 - 4.9 51 x 102 mm

Mesh Roller 0.46 - 1.27

Page


MARSHALLTOWN HANDTOOLS

• Broken-in shape eliminates line and ripple

marks right from the start

• Beveled work edges prevent surface

aggregate popping

• PermaShape® guarantees trowel will remain

original broken-in shape

• Sold 1 per inner pack/12 per outer pack,

• 6 per outer pack where noted with *

• Lightweight aluminum construction

• Can be used as a screed, float or check rod

• Dual-edge design, sharp edge for cutting and round edge for

floating concrete

• Attach handle to the bottom side of screed for double the life

• Handle adjusts to desired position for better comfort

• 13745 & 13746 ship LTL

• Sold 1 per inner pack/1 per outer pack

• Lightweight aluminum construction

• Power coated with soft grip end-cap

• Braced for additional strength


• Extruded from very hard, curable, lightweight magnesium

• Most popular float design

• Comfortable handle is positioned to give the tool perfect balance

• Recommended for use with air entrained concrete


PermaShape® Finishing Trowels Beveled End Magnesium Hand Floats

Combo Screed All Aluminum Placer

Size (mm)

305 x 76

305 x 102

356 x 76

356 x 102

356 x 127

406 x 102

406 x 127 *

457 x 107 *

457 x 127 *

508 x 102*

508 x 127*

Size (mm)

406 x 79

508 x 79

Size (mm)

1.8m x 51mm x 41mm

2.4m x 51mm x 41mm

Size (mm)

492 x 102

American Made with

American Materials and Design

BUILT TO LAST!*For sale South East Asia and not in Australia &

New Zealand

Page


REVOLUTION ROTARY SYSTEM ™

Applications:

• Scrub-in penetrating sealers

• Remove residue from stain and dye applications

• Clean-up floors after tilt-up construction• Strip sealers

• Power scrub old concrete clean

• Surface preparation

• Scrub casting beds and forms clean

• Not recommened for electric trowels

Revolution Rotary System Mounts

One Rotary System Mount per trowel arm

DetailsPad Replacement

Revolution Brushes

NOTE: All brushes are 14" and fit both 36" and 46/48" rotary system mounts. One brush per trowel arm

Bristle TypeBrushes/Part #

Comparable to a highproductivity strip pad

.070" nylonimpregnated w/46 gritsilicon carbide

.050” nylonimpregnated w/ 80 gritsilicon carbide

.035” nylonimpregnated w/ 180 gritsilicon carbide

.014" steel wire

Natural Tampico fiber

Ultra-Grit*WRS-14-UG

5.6 lbs.

Nitro-Grit*WRS-14-NG

5.6 lbs.

Virta-Grit*WRS-14-VG

5.5 lbs.

WireWRS-14-WR

6.6 lbs.

TampicoWRS-14-TA

5.6 lbs.

Comparable to a black or brown pad

Comparable to a blue or green pad

• The most aggressive stripping brush• Ideal for heavily soiled concrete surfaces

• An aggressive grit brush• Used for stripping finishes from hard surfaces

• Frequent cleaning of hard surfaces• Flexible for cleaning narrow joints and uneven surfaces

• Most often used on unfinished concrete floor• Variety of uses and economical• Steel wire will rust

• Naturally acid resistant• Soft bristle

When in doubt of scratching, use softer bristle.

*Hydrochloric acid/muriatic acid may soften grit and nylon brushes

WARNING: Do not use Wagman Rotary System with flammable materials.

.060” PolyMondo Poly*WRS-14-MP

5.2 lbs.

Comparable to a black or brown pad

• General scrubbing• Supports weight of rider with no risk of scratching

Apply

Dens

ifier /

Dustp

roofer

(smoo

th su

rface

)

Page


MATERIAL SPREADER

Model MS10A MS20

Dimension - L x W x H (m) 0.82 x 0.95 x 0.92 0.95 x

Weight (kg) 47.4 60

Discharge Width (m) 0.8 0.99

Hopper Capacity (kg) 50 100

The Morrison material spreaders are ideal for all types of after-pour applications, such as hardeners, colourings, and light reflective coatings. They come in various size and options for your application needs.

FEATURES:

• Available in 0.7m, 1.5m and 3m sections

• Material flow is adjustable from 0.5kg to 14kg per square

metre

• Flow rate control is independent from hopper travel speed

• Hopper height is adjustable from 5cm to 45.7cm over slab

• Bolted construction makes on-site length changes and

adjustments quick and easy using everyday tools

• Metered flow valve assures precise applications of expensive

toppings

• Capable of spanning slabs from 3metres to 23metres

OPTIONS:

• Wheeled end section with 2 or 4 wheels per end

• Trap rock discharge adaptors

• Calibration pan 0.45kg weight for 0.3m2

Model MS20

Engine GX160 Gasoline Engine (5.5hp)

Capacity (litre) 127

Maximum Load (kg) 227

Discharge Width (cm) 122

Hopper Weight (kg) 175

Section Weight (kg) 0.7m: 8 1.5m: 14.5 3.0m: 28Wheel Assembly Weight (kg) 123

Maximum Span (m) 23

MS40C

MS10A

FEATURES:

• The hopper can takes 50kg (MS10A)

and 100kg (MS20) of material

• Able to control rate of discharge

• Foldable handle for ease of

transportation and storage

• Wheels drive hopper blades

• Exact material measurement per

square metre saves material cost and

meets job specification.

MS20

Page


SHOTBLASTERS & SCARIFIERS

SPE12ES & SPE12DC

The SPE has a range of shotblasters that are electrically powered, built for medium to large area shot blasting and developed for

the professional contractor to yield high production rates. Mainly used for preparation of concrete floors but equally effective on steel surfaces.

Model SPE9ES SPE12ES SPE16ES SPE20ES

Dimension - L x W x H (m) 0.80 x 0.34 x 0.84 1.18 x 0.48 x 1.2 1.25 x 0.51 x 1.25 1.51 x 0.59 x 1.45

Voltage (V) 230/400/460 230/400/460 400/460 400/460

Phase Single / Three Three Three Three

Cycles 50 / 60Hz 50 / 60Hz 50 / 60Hz 50 / 60Hz

Working Width (mm) 230mm 305 406 520

Weight 89 (single ph) / 100 ( 3ph) 320 400 852

Dust collection unit - SPE12DC SPE16DC SPE20DC

Dimension - L x W x H (m) Use industrial vacuum 1.73 x 0.8 x 1.6 1.73 x 1.03 x 1.6 1.73 x 1.03 x 1.6

Weight (kg) - 350 400 450

Before and after shotblasting

Model BEF200 BEF320


Engine type Petrol / Diesel / 230V Petrol / Diesel / 400/460V

Phase Single Three

Cycles - 50 / 60Hz

Working Width (mm) 200 320

Weight 49 - 54 319 - 339

Working Distance from Wall (mm) 45 40

Dimension - L x W x H (m) Use industrial vacuum 1.73 x 1.03 x 1.6

SPE has a wide range of scarifiers to meet the requirement of any job.

APPLICATIONS:-

• Cleaning and texturing concrete and asphalt

• Removal of paint, rust, grease, ice deposits, line markings, and concrete laitance

• Concrete reduction and scabbling

• Grooving applications

• Removal of waterproof membranes from bridge and carpark decks

SHOTBLASTERS

SCARIFIERS

Page


PLANETARY GRINDERS & EDGE GRINDER

DFG280 - EDGE GRINDERS

DFG280

FEATURES:

• NEW Floating head design

• 10” Grinding Head

• Folding Handle, with multiple settings for

height adjustment

• Built in Lifting Handles

• Edge grinding capabilities on BOTH sides

• “Wall Walking” roller bearing for edge

work

Model DFG280


Engine type 230V

Phase Single

Cycles -

Working Width (mm) 200

Weight 44

Head Speed (rpm) 1,400

Motor Speed (rpm) 1,400

Removable Weight (kg)

At Innovatech, our Predator line offloor grinder machines is designed to handle every size job imaginable with power, performance and durability. Our P2400 amd P32N are the ideal choice for light commercial applications to heavy removal of

coatings and laitance, providing just the right touch for all concrete floor grinder needs.

FEATURES:

• Patented 4-head planetary design

• Flexible or rigid cutting heads

• Perfect balance

• Compact design

• Reliability

• Easy height adjustment

• Full assortment of tooling

• Easy on-site maintenance with standard

tools

• Variable speed control

Model P2400 P32N


Voltage 230V / 400V 400V

Power Output 7.5hp / 10.0hp 15hp

Phase 1 / 3 Phase 3 Phase

Cycles 50/60Hz 50 / 60Hz

Grinding Plate Speed (rpm) 0-300 0-105

Grinding Width (mm) 610 814

Grinding Head Width (mm) 216 270

Water Tank Capacity (litre) 22.7 22.7

Weight (kg) 304 431

PREDATOR PLANETARY GRINDERS

Page


ANCON Equipment Accessories

GL720 Laser Transmitter

(900m Working Diameter)

GL722 Laser Transmitter


LL500 Laser Transmitter


Tripod for Laser Transmitter

Column Clamp for Laser Transmitter

Standard Motorcycle Tyre/Wheel High Flotation Tyre/Wheel Nylon Lift Harness Chain Link Lift Harness

Auger Kit

Nylon Lift Harness Chain Link Lift Harness Ride-On Trowel Dolly Jacks

SOMERO EQUIPMENT ACCESSORIES

ALLEN ENGINEERING EQUIPMENT ACCESSORIES

Ramps for Large Line Laser Screeds

Power Washer SAE/Metric Tool Kit

Page


ANCON Warehouse & Customer Service

ANCON’s warehouse and service center is in Melbourne, Australia.

The Melbourne Warehouse is the main support center for ANCON’s customers in Australia, New Zealand and South East Asia.

ANCON Support Consists of:

• Customer Support via Phone and Email

• On-site Equipment Service and Support

• Spare Parts and Accessories

Melbourne, Australia Allen Stock Melbourne, Australia Somero Stock

Onsite Allen Equipment Service Onsite Somero Equipment Service

MELBOURNE OFFICE /WAREHOUSE

33/111 Lewis Road, Knoxfield, Victoria 3180PO Box 4506, Wantirna South, Victoria 3166

Phone: +61 3 9801 6600

BRISBANE OFFICE Unit 1 / 35 Manton Street

Morningside, QLD Australia 4170

ADELAIDE OFFICEUnit 3, Level 1, 66 Rundle StreetKent Town, South Australia 5067

PO Box 421, Glenside, South Australia 5065Phone: +61 8 8362 4540

Documents

Australia - ANCON Betonanconbeton.com/wp-content/uploads/2017/06/FINAL-Full...The S-15R Laser Screed® concrete-leveling machine screeds 18m2 per pass with a 6.1 metres telescopic