AUR30612 - Certificate III in Light Vehicle Mechanical ... Mapping Combined.pdf · AUR30612 - Certificate III in Light Vehicle Mechanical Technology . Text name: Automotive Technology:

Cengage Learning, Automotive Technology: A Systems Approach, 6e 2014 v1.0

Competency Mapping Grid AUR30612 - Certificate III in Light Vehicle Mechanical Technology Text name: Automotive Technology: A Systems Approach, 6e ISBN: 9781133612315 Author: Erjavec/ Thompson Automotive Technology: A Systems Approach is the most trusted text on automotive theory, service, and repair. Now in its sixth edition, it has been thoroughly updated to provide accurate and current information on the latest technology, industry trends and state-of-the-art tools and techniques.

Unit of Competency Chapter AURAEA3003 Monitor environmental and sustainability best practice in the automotive mechanical industry

Ch. 1 Careers in the Automotive Industry pg 1 Ch. 7 Working Safely in the Shop pg 159 Ch. 33 Emission Control Systems pg 948

AURASA2002 Apply safe working practices in an automotive workplace

Ch. 7 Working Safely in the Shop pg 159

AURETR2012 Test and repair basic electrical circuits

Ch. 6 Diagnostic Equipment and Special Tools pg 126 Ch. 15 Basics of Electrical Systems pg 401 Ch. 16 General Electrical System Diagnostics and Service pg 426

AURETR3023 Diagnose and repair electronic spark ignition engine management systems

Ch. 24 Engine Performance Systems pg 671 Ch. 26 Ignition Systems pg 749 Ch. 27 Ignition System Diagnosis and Service pg 772

AURETR3025 Test, charge and replace batteries Ch. 17 Batteries: Theory, Diagnosis, and Service pg 470 AURETR3029 Diagnose and repair charging systems Ch. 19 Charging Systems pg 521 AURETR3030 Diagnose and repair starting systems Ch. 18 Starting and Motor Systems pg 495 AURETR3031 Diagnose and repair ignition systems Ch. 26 Ignition Systems pg 749

Ch. 27 Ignition System Diagnosis and Service pg 772 AURLTZ3001 Diagnose and repair light vehicle emission control systems

Ch. 32 Intake and Exhaust Systems pg 920 Ch. 33 Emission Control Systems pg 948 Ch. 34 Emission Control Systems Diagnosis and Service pg 975

AURLTB3003 Diagnose and repair light vehicle hydraulic braking system

Ch. 50 Brake Systems pg 1467 Ch. 51 Drum Brakes pg 1504 Ch. 52 Disc Brakes pg 1530 Ch. 53 Antilock Brake, Traction Control and Stability Control Systems pg 1557

AURLTD3004 Repair steering systems (light vehicle) Ch. 47 Steering Systems pg 1377 AURLTD3005 Repair suspension systems (light vehicle)

Ch. 46 Suspension Systems pg 1336

AURLTE3002 Repair engines and associated engine components (light vehicle)

Ch. 9 Automotive Engine Design and Diagnosis pg 209 Ch. 10 Engine Disassembly and Cleaning pg 242 Ch. 11 Lower End Theory and Service pg 263 Ch. 12 Upper End Theory and Service pg 299 Ch. 13 Engine Sealing and Reassembly pg 332

AURTTA2004 Carry out servicing operations

Ch. 8 Preventative Maintenance and Basic Services pg 177 Ch. 24 Engine Performance Systems pg 671 (Each section also address this unit)


AURTTA3018 Carry out diagnostic procedures Ch. 6 Diagnostic Equipment and Special Tools pg 126 Ch. 24 Engine Performance Systems pg 671 Ch. 25 Detailed Diagnosis and Sensors pg 705 (Each section also address this unit)

AURTTB2001 Inspect and service braking systems Ch. 50 Brake Systems pg 1467 Ch. 51 Drum Brakes pg 1504 Ch. 52 Disc Brakes pg 1530 Ch. 53 Antilock Brake, Traction Control and Stability Control Systems pg 1557

AURTTC3003 Diagnose and repair cooling systems Ch. 54 Heating and Air Conditioning pg 1587 Ch. 55 Heating and Air Conditioning Diagnosis and Service pg 1621

AURTTE2004 Inspect and service engines Ch. 4 Automotive Systems pg 68 Ch. 9 Automotive Engine Design and Diagnosis pg 209 Ch. 10 Engine Disassembly and Cleaning pg 242 Ch. 11 Lower End Theory and Service pg 263 Ch. 12 Upper End Theory and Service pg 299 Ch. 13 Engine Sealing and Reassembly pg 332

AURTTF2001 Service petrol fuel systems Ch. 24 Engine Performance Systems pg 671 Ch. 29 Fuel Delivery Systems pg 845 Ch. 30 Electronic Fuel Injection pg 873 Ch. 31 Fuel Injection System Diagnosis and Service pg 893

AURTTK2002 Use and maintain workplace tools and equipment

Ch. 4 Automotive Systems pg 68 Ch. 5 Hand Tools and Shop Equipment pg 90 Ch. 6 Diagnostic Equipment and Special Tools pg 126 Ch. 7 Working Safely in the Shop pg 159

AURACA2001 Establish relations with customers Ch. 1 Careers in the Automotive Industry pg 1 Ch. 2 Workplace Skills pg 18

AURAFA2003 Communicate effectively in an automotive workplace

Ch. 1 Careers in the Automotive Industry pg 1 Ch. 2 Workplace Skills pg 18

AURLTX3001 Repair transmissions – manual (light vehicle)

Ch. 38 Manual Transmissions and Transaxles pg 1097 Ch. 39 Manual Transmission/Transaxle Service pg 1122

AURLTX3002 Repair transmissions – automatic (light vehicle)

Ch. 42 Electronic Automatic Transmissions pg 1223 Ch. 43 Automatic Transmission and Transaxle Service pg 1249

AURLTX3003 Diagnose and repair light vehicle clutch systems

Ch. 37 Clutches pg 1075

AURETD3001 Service and repair electronically controlled steering systems

Ch. 23 Electrical Accessories pg 629

AURLTD3006 Carry out wheel alignment operations (light vehicle)

Ch. 45 Tyres and Wheels pg 1307 Ch. 49 Wheel Alignment pg 1443

AURLTJ2001 Select tyres and rims for specific applications (light vehicle)

Ch. 45 Tyres and Wheels pg 1307

AURLTJ2002 Remove, inspect, repair and fit tyres and tubes (light vehicle)


AURLTJ2003 Remove, inspect and refit light vehicle wheel assemblies


AURETH3001 Depower battery electric vehicles Ch. 35 Hybrid Vehicles pg 1004 Ch. 36 Electric Vehicles pg 1043

AURETH3002 Service and maintain battery electric vehicles

Ch. 35 Hybrid Vehicles pg 1004 Ch. 36 Electric Vehicles pg 1043


AURETR2005 Install, test and repair electrical security systems and components

Ch. 23 Electrical Accessories pg 629

AURETR2011 Install and test basic ancillary electrical components

Ch. 22 Basics of Electronics and Computer Systems pg 601 Ch. 23 Electrical Accessories pg 629

AURETR3020 Repair electronic systems Ch. 16 General Electrical System Diagnostics and Service pg 426 Ch. 22 Basics of Electronics and Computer Systems pg 601 Ch. 23 Electrical Accessories pg 629

AURETR3024 Diagnose and repair electronic compression ignition engine management systems

Ch. 26 Ignition Systems pg 749 Ch. 27 Ignition System Diagnosis and Service

AURETR3028 Diagnose and repair instruments and warning systems

Ch. 16 General Electrical System Diagnostics and Service pg 426 Ch. 20 Lighting Systems pg 544 Ch. 21 Instrumentation and Information Displays pg 580

AURETR3032 Repair electrical systems Ch. 15 Basics of Electrical Systems pg 401 Ch. 16 General Electrical System Diagnostics and Service pg 426

AURETR3036 Service and repair electronically controlled suspension systems

Ch. 46 Suspension Systems pg 1336

AURTTA3017 Carry out vehicle safety and roadworthy inspections

Ch. 48 Restraint Systems: Theory, Diagnosis and Service (Each section also address this unit)

AURETU2003 Service air conditioning and HVAC systems

Ch. 35 Hybrid Vehicles pg 1004 Ch. 54 Heating and Air Conditioning pg 1587 Ch. 55 Air Conditioning Diagnosis and Service pg 1621

AURETU3004 Diagnose and repair air conditioning and HVAC systems

Ch. 35 Hybrid Vehicles pg 1004 Ch. 54 Heating and Air Conditioning pg 1587 Ch. 55 Air Conditioning Diagnosis and Service pg 1621

AURLTF3001 Diagnose and repair mechanical fuel injection systems

Ch. 30 Electronic Fuel Injection pg 873 Ch. 31 Fuel Injection Systems Diagnosis and Service pg 893

AURTTQ2001 Service final drive assemblies Ch. 38 Manual Transmissions and Transaxles pg 1097 Ch. 40 Drive Axles and Differentials pg 1140 Ch. 41 Automatic Transmissions and Transaxles pg 1179

AURTTQ2003 Service final drive (driveline) Ch. 38 Manual Transmissions and Transaxles pg 1097 Ch. 40 Drive Axles and Differentials pg 1140 Ch. 41 Automatic Transmissions and Transaxles pg 1179

AURLTQ3001 Repair final drive assemblies (light vehicle)

Ch. 38 Manual Transmissions and Transaxles pg 1097 Ch. 40 Drive Axles and Differentials pg 1140 Ch. 41 Automatic Transmissions and Transaxles pg 1179

AURLTQ3002 Repair final drive – driveline (light vehicle)

Ch. 38 Manual Transmissions and Transaxles pg 1097 Ch. 40 Drive Axles and Differentials pg 1140 Ch. 41 Automatic Transmissions and Transaxles pg 1179

AURTTA2005 Select and use bearings, seals, gaskets, sealants and adhesives

Ch. 13 Engine Sealing and Reassembly pg 332 Ch. 45 Tyres and Wheels pg 1307

AURTTA2009 Carry out pre-repair operations (mechanical)

Ch. 8 Preventative Maintenance and Basic Services pg 177 Ch. 10 Engine Disassembly and Cleaning pg 242

AURTTC2001 Inspect and service cooling systems Ch. 14 Lubricating and Cooling Systems pg 362


AURTTB2003 Machine brake drums and brake disc rotors

Ch. 50 Brake Systems pg 1467 Ch. 51 Drum Brakes pg 1504 Ch. 52 Disc Brakes pg 1530

AURTTB3005 Assemble and fit braking system and components

Ch. 50 Brake Systems pg 1467 Ch. 51 Drum Brakes pg 1504 Ch. 52 Disc Brakes pg 1530

AURTTB3006 Inspect, service and repair auxiliary braking systems

Ch. 50 Brake Systems pg 1467 Ch. 51 Drum Brakes pg 1504 Ch. 52 Disc Brakes pg 1530 Ch. 53 Antilock Brake, Traction Control and Stability Control Systems pg 1557

AURTTD2002 Inspect and service steering systems Ch. 45 Tyres and Wheels pg 1307 Ch. 47 Steering Systems pg 1377

AURTTD2004 Inspect and service suspension systems

Ch. 45 Tyres and Wheels pg 1307 Ch. 46 Suspension Systems pg 1336

AURTTZ2002 Repair exhaust system components Ch. 32 Intake and Exhaust Systems pg 920 AURTTF2002 Service diesel fuel injection systems Ch. 28 Gasoline, Diesel and Other Fuels pg 808 AURTTF3004 Repair diesel fuel injection systems Ch. 28 Gasoline, Diesel and Other Fuels pg 808

Ch. 29 Fuel Delivery Systems pg 845 Ch. 31 Fuel Injection System Diagnosis and Service pg 893

AURTTF3005 Inspect and repair engine forced induction systems

Ch. 32 Intake and Exhaust Systems pg 920

AURTTK2001 Use and maintain measuring equipment in an automotive workplace

Ch. 5 Hand Tools and Shop Equipment pg 90 Ch. 6 Diagnostic Equipment and Special Tools pg 126

AURTTX2002 Inspect and service transmissions (manual)

Ch. 37 Clutches pg 1075 Ch. 38 Manual Transmissions and Transaxles pg 1097 Ch. 39 Manual Transmission/Transaxle Service pg 1122

AURTTX2003 Inspect and service transmissions (automatic)

Ch. 41 Automatic Transmissions and Transaxles pg 1179 Ch. 42 Electronic Automatic Transmissions pg 1223 Ch. 43 Automatic Transmissions and Transaxle Service pg 1249

AURETR2009 Install, test and repair vehicle lighting and wiring systems

Ch. 15 Basics of Electrical Systems pg 401 Ch. 16 General Electrical System Diagnostics and Service pg 426 Ch. 20 Lighting Systems pg 544

AURETR2015 Inspect and service batteries Ch. 17 Batteries: Theory, Diagnosis and Service pg 470 AURAFA2001 Use numbers in an automotive workplace

Ch. 3 Basic Theories and Math pg 35

AURETH4014 Diagnose complex faults in battery electric and hybrid electric vehicle systems

Ch. 35 Hybrid Vehicles pg 1004 Ch. 36 Electric Vehicles pg 1043

Mapping for Thomas/Jund 2e, AUR32112, Jan 2015

Competency Mapping Grid Qualification Code and title: AUR32112 Certificate III in Automotive Body Repair Technology Text name: Collision Repair and Refinishing, 2e ISBN: 9781133601876 Thomas/Jund

Units of Competency Chapter Reference

Core Units

AURAFA3008 Read and apply automotive repair instructions

Ch 1. Introduction to Collision Repair


Ch 2. Collision Repair Safety

AURETR3025 Test, charge and replace batteries Ch 33. Electrical Components (pg. 869‐876)

AURTTK2002 Use and maintain workplace tools and equipment

Ch 3. Hand Tools Ch 4. Power Tools

AURTTY3001 Repair chassis, frame and associated components

Ch 6. Vehicle Construction Ch 16. Structural Parts Replacement

AURVEN3002 Monitor environmental and sustainability best practice in the automotive body repair industry


AURVTN2003 Carry out pre‐repair vehicle body operations

Ch 13. Measuring Structural Damage

AURVIN1004 Remove, replace and realign bolt‐on panels, sections and fittings

Ch 12. Bolted Exterior Panel Replacement

AURVTN3016 Repair body panels incorporating filler

Ch 8. Fillers

AURVTN3020 Replace major welded panels Ch 15. Welded Exterior Panel Replacement

AURVTN3022 Repair vehicle body misalignment

Ch 14. Straightening and Repairing Structural Damage Ch 16. Structural Parts Replacement

AURVTN3023 Remove and replace adhesive bonded panels and structures

Ch 18. Plastic Repair

AURVTN3035 Apply original equipment manufacturer repair procedures

Ch 16. Structural Parts Replacement

AURVTN4032 Determine vehicle damage and recommended repair procedures

Ch 6. Vehicle Construction Ch 10. Estimating Collision Damage Ch 11. Collision Damage Analysis

AURVTW2003 Carry out gas metal arc welding procedures

Ch 5. Welding Procedures and Equipment

AURVTW2007 Conduct oxy‐acetylene, thermal heating and cutting

NA


Elective Units

AURTTW2001 Carry out spot welding procedures

Ch 5. Welding Procedures and Equipment

AURVTN3025 Repair corroded panels and components

Ch 19. Corrosion Protection

AURVTN3015 Repair body panels using metal finishing techniques

Ch 7. Straightening Steel and Aluminium Ch 14. Straightening and Repairing Structural Damage Ch 15. Welded Exterior Panel Replacement Ch 16. Structural Parts Replacement

AURVTN3021 Repair body components using lead wiping

Ch 8. Fillers

AURVTN2002 Carry out panel repairs Ch 15. Welded Exterior Panel Replacement

AURVTN2005 Remove and fit protector mouldings, transfers and decals

Ch 9. Trim and Hardware

AURVTN3018 Repair and replace structural damage by welding

Ch 17. Full Frame Sectioning and Replacement

AURVTN3019 Repair and replace structural damage by riveting

Ch 17. Full Frame Sectioning and Replacement

AURVTN3026 Repair aluminium body panels (finishing)

Ch 7. Straightening Steel and Aluminium Ch 17. Full Frame Sectioning and Replacement

AURVTN3027 Repair aluminium body panels (filling)

Ch 8. Fillers Ch 17. Full Frame Sectioning and Replacement

AURVTN3028 Identify and repair high strength steel components

Ch 7. Straightening Steel and Aluminium

AURVTN3029 Set up and operate universal measuring systems

Ch 13. Measuring Structural Damage

AURVTN3031 Conduct major sectional repairs Ch 14. Straightening and Repairing Structural Damage Ch 15. Welded Exterior Panel Replacement Ch 16. Structural Parts Replacement Ch 17. Full Frame Sectioning and Replacement

AURVTP3013 Prepare substrate for refinishing Ch 25. Surface Preparation Ch 28. Application of Undercoats

AURVTA3002 Remove and replace supplementary restrain systems

Ch 36. Mechanical Systems

AURVTN3017 Repair body panels and thermoplastic components



Competency Mapping Grid Qualification Code and title: AUR32412 Certificate III in Automotive Refinishing Technology Text name: Collision Repair and Refinishing, 2e ISBN: 9781133601876 Thomas/Jund

Units of Competency Chapter Reference

AURAFA3008Read and apply automotive repair instructions

Ch 1. Introduction to Collision Repair Ch 11. Collision Damage Analysis

AURASA2002Apply safe working practices in an automotive workplace


AURVEN3002 Monitor environmental and sustainability best practice in the automotive body repair industry


AURVTP2001 Apply paint removal methods Ch 25. Surface Preparation

AURVTP2002 Carry out masking procedures Ch 26. Masking Materials and Procedures

AURVTP2003 Prepare spray painting materials

and equipment

Ch 20. Paint Spray Guns Ch 21. Spray Techniques Ch 22. Refinishing Shop Equipment

AURVTP2004 Apply fundamental colour matching techniques

Ch 31. Color Evaluation and Adjustments

AURVTP2006 Prepare vehicle components for paint repairs

Ch 22. Refinishing Shop Equipment Ch 25. Surface Preparation

AURVTP3013 Prepare substrate for refinishing Ch 22. Refinishing Shop Equipment Ch 25. Surface Preparation Ch 28. Application of Undercoats

AURVTP3014 Apply multi ‐layer and clear over‐base colour matching techniques

Ch 22. Refinishing Shop Equipment Ch 24. Understanding Refinishing Ch 25. Surface Preparation. Ch 29. Advanced Refinishing Procedures Ch 31. Color Evaluation and Adjustments

AURVTP3015 Apply solid colour matching techniques

Ch 22. Refinishing Shop Equipment Ch 24. Understanding Refinishing Ch 25. Surface Preparation Ch 29. Advanced Refinishing Procedures Ch 31. Color Evaluation and Adjustments

AURVTP3017Carry out paint rectification and touch‐up work for clear over base using two component systems

Ch 31. Color Evaluation and Adjustments Ch 32. Paint Problems and Prevention

AURVTP3019 Prepare and paint plastic components

Ch 22. Refinishing Shop Equipment Ch 24. Understanding Refinishing Ch 25. Surface Preparation Ch 29. Advanced Refinishing Procedures Ch 31. Color Evaluation and Adjustments

AURVTP3020 Carry out denibbing, buffing and Polishing

Ch 23. Detailing


AURVTP3023 Mix and apply clear over‐base refinishing materials in two‐component systems

Ch 22. Refinishing Shop Equipment Ch 24. Understanding Refinishing Ch 25. Surface Preparation Ch 29. Advanced Refinishing Procedures

AURVTP3024 Mix and apply clear over‐base multi‐layer pearl refinishing materials


AURVTP3025 Mix and apply water‐based refinishing materials


AURETR3025 Test, charge and replace batteries Ch 33. Electrical Components

AURVTN2005 Remove and fit protector mouldings, transfers and decals

Ch 9. Trim and Hardware

AURVTP2007Apply paint touch‐up techniques

Ch 21. Spray Techniques Ch 29. Advanced Refinishing Procedures Ch 31. Color Evaluation and Adjustment

AURVTP2009 Apply vehicle body film wrapping Ch 23. Detailing

AURVTP2026 Carry out basic airbrush application techniques

Ch 20. Paint Spray Guns Ch 21. Spray Techniques

AURVTP3010 Prepare spray booths and paint drying equipment

Ch 22. Refinishing Shop Equipment

AURVTN3017 Repair body panels and thermoplastic components


AURVTN3035 Apply original equipment manufacturer repair procedures

Ch 6. Vehicle Construction

AURVTN4032 Determine vehicle damage and recommended repair procedures

Ch 10. Estimating Collision Damage Ch 11. Collision Damage Analysis Ch 13. Measuring Structural Damage Ch 16. Structural Parts Replacement

AURVTP3011 Apply solid acrylic enamel refinishing materials using two component system

Ch 23. Detailing Ch 24. Understanding Refinishing

AURVTP3012 Apply air dry and polyurethane enamel refinishing materials

Ch 23. Detailing Ch 24. Understanding Refinishing

AURVTP3016 Carry out paint rectification and touch‐up work for solids using two component systems

Ch 24. Understanding Refinishing Ch 32. Paint Rectification and Prevention

AURVTP3018 Carry out paint rectification for multi‐layer and pearl using two component systems

Ch 24. Understanding Refinishing Ch 32. Paint Rectification and Prevention

Unit title ElementsChapter (Section 1) Section

1 2 3 4 5 6 7 8 9 10 11 12 13 14 S2 S3

MSAENV272B Participate in environmentally- sustainable work practices

1. Identify current resource use and environmental issues x

2. Comply with environmental regulations x

AURAEA2002 Apply environmental and sustain-ability best practice in an automotive workplace

1. Identify and apply environment regulations x

3. Identify and avoid hazards to air quality x

5. Identify and apply sustainability practices x


1. Apply basic safety procedures x

AURETU2002 Recover vehicle refrigerants

1. Prepare for refrigerant recovery x

2. Operate recovery equipment x

3. Complete recovery operations x

AURETU2003 Service air conditioning and HVAC systems

1. Prepare to service an air conditioning and HVAC system

x x x x x x x x

2. Functionally test air conditioning and HVAC system and components and identify faults

x x x x x

3. Service air conditioning and HVAC system x x x

4. Retest air conditioning and HVAC system x x x

AURETU3005 Retrofit and modify air conditioning and HVAC systems

1. Prepare to retrofit air conditioning and HVAC system x

2. De-gas and re-gas air conditioning and HVAC system x x

3. Retrofit air conditioning and HVAC system x

4. Performance test air conditioning and HVAC system x x

5. Retest air conditioning and HVAC systems x x

AURETU3004 Diagnose and repair air condition-ing and HVAC systems

1. Prepare to diagnose and repair air conditioning and HVAC system

x x

2. Diagnose air conditioning and HVAC system x x x

3. Repair air conditioning and HVAC system x x

4. Retest air conditioning and HVAC system x x

AURTTA3018 Carry out diagnostic procedures

1. Prepare to diagnose faults x x x x x

2. Apply technology to isolate fault(s)

3. Recommend rectification method(s) x x x x x

AURETR2012 Test and repair basic electrical circuits

2. Test basic electrical circuits and identify faults x

3. Complete repairs to basic electrical circuits x

AURETU4006 Diagnose complex faults in air conditioning and HVAC systems

1. Identify and confirm work requirement x x

2. Prepare to perform diagnosis x x

3. Apply complex diagnostic process x x

AURETU4007 Overhaul air conditioning system components

1. Prepare to overhaul air conditioning components x

2. Test air conditioning systems and analyse results x

3. Overhaul air conditioning system components x

AURTTC2001 Inspect and service cooling system

2. Inspect cooling systems and analyse results x

3. Carry out servicing x

This grid shows how the contents of this book relate to units of competency required for AUR30312 Certificate III in Automotive Electrical Technology and associated units from the AUR12 Training Package, as endorsed by the Industry Skills Council on 17 January 2013. Training packages are not static documents; they are amended periodically to reflect the latest industry practices and are version controlled. Please check the latest version by going to http://www.training.gov.au

Mapping grid

00 Green 3ed SB 9780170197748 IFC.indd 1 5/15/13 10:07 PM

Before the assignments…before the tests…before the diploma…comes the foundation of learning: engagement. Like you, our passion is to engage the minds of your students and

challenge them to think critically. Cengage Learning uniquely combines people, products, and personalized services to help you prepare students for success – in the classroom and in life.

LEARNING SOLUTIONS: Beyond Memorization. Understanding. Offer your students learning resources focused on engagement, taking students through the levels of application, analysis, and critical thinking with depth and context.

Course Guide AUTOMOTIVE & TRUCK TECHNOLOGY2015 Learning Solutions

Visit www.cengage.com/automotive/cg and search by ISBN to request complimentary online review copies and find information on online solutions, supplements, bundles, and alternative formats.Or contact your Learning Consultant/Sales Representative at 1-800-423-0563.

Cengage Learning’s CourseMate brings course concepts to life with interactive learning, study, and exam preparation tools that support the printed textbook.

With Cengage Learning’s Instructor Resources to accompany many of our products, preparing for class and evaluating students has never been easier!

The Professional Technician Training Series offers online or CD-ROM based training in system-specific automotive and medium/heavy duty truck areas. Each course contains video, animation, and interactivity. Visit www.trainingbay.cengage.com/tt for more information.

Through personalized paths of dynamic assignments and applications, MindTap is a digital learning solution that turns cookie cutter into cutting edge, apathy into engagement, and memorizers into higher-level thinkers.

Diesel Engine VideosEngage your students with 57 videos on topics that cover both the theory and servicing on modern diesel engines, fuel and engine management systems. Available on CD-ROM or with the CourseMate accompanying Medium/Heavy Duty Truck Engines, Fuel & Computerized Management Systems. (ISBNs can be found under the Diesel Technology section of this course guide.)

A rich-media learning experience that challenges learners to master diagnostic and repair practices in 62 realistic scenarios spanning all systems areas.

The Online ASE Technician Test Preparation (TTP) Series offers three types of testing modes and remediation. TTP covers the automotive, medium/heavy duty truck, collision, and transit bus areas. Visit www.trainingbay.cengage.com/ttp for more information.

ChiltonPRO is a cost-effective electronic repair information system combining all of Chilton’s famous repair information into one easy-to-use tool. Visit www.chiltonpro.com for more information.

NEW!

MindTap Automotive Trades Automotive Service: Inspection, Maintenance, Repair, 5eGilles©2016ISBN-13: 978-1-305-27386-3

NEW!

Automotive Service: Inspection, Maintenance, Repair, 5eGilles©2016CaseboundISBN-13: 978-1-305-11059-5

BASIC TECHNICIAN TRAININGMindTap Automotive Trades Automotive Technology: A Systems Approach, 6e Erjavec/Thompson ©2015ISBN-13: 978-1-285-77259-2

Automotive Technology: A Systems Approach, 6eErjavec/Thompson©2015CaseboundISBN-13: 978-1-133-61231-5

MindTap Automotive Trades Today’s Technician: Basic Automotive Service & Systems, 5eHadfield©2016ISBN-13: 978-1-305-38669-3

Today’s TechnicianTM: Basic Automotive Service & Systems, 5eHadfield©2015PaperboundISBN-13: 978-1-285-44229-7

Digital Solutions are available for your course! Look for logo(s) accompanying the cover image of your selected product(s).

http://www.cengage.com/automotive/cg



http://www.cengagebrain.com/shop/en/US/storefront/US?cmd=CLHeaderSearch&fieldValue=978-1-285-77259-2


























Web: www.cengage.com/automotive/cg • Phone: 1-800-423-0563

AVAILABLE FOR THE FIRST TIME!

Automotive Maintenance & Light RepairThompson©2014CaseboundISBN-13: 978-1-111-30741-7

Hybrid, Electric, and Fuel-Cell Vehicles, 2eErjavec©2013PaperboundISBN-13: 978-0-8400-2395-7

Math for the Automotive Trade, 5ePeterson/deKryger©2012PaperboundISBN-13: 978-1-111-31823-9

MindTap Automotive Trades Today’s Technician: Automotive Brake Systems, 6ePickerill©2015ISBN-13: 978-1-305-27481-5

Automotive Service Job Sheets for NATEF Task Mastery, 2eHadfield©2012PaperboundISBN-13: 978-1-111-13798-4

All 8 AreasCengage Learning©2012ISBN-13: 978-1-133-60164-7

Practical Problems in Math ematics for Automotive Technicians, 7eSformo©2009PaperboundISBN-13: 978-1-428-33524-0

MindTap Automotive Trades Today’s Technician: Automotive Electricity & Electronics, 6eHollembeak©2015ISBN-13: 978-1-305-27484-6

Today’s TechnicianTM: Automotive Electricity & Electronics, 6eHollembeak©2015PaperboundISBN-13: 978-1-285-42571-9

Guide to Diagnostic Product Certification – TransportationJanisin©2012PaperboundISBN-13: 978-1-435-48379-8

The Car Care Book, 4eHaefner©2010PaperboundISBN-13: 978-1-428-34295-8

Today’s TechnicianTM: Advanced Automotive Electronic SystemsHollembeak©2011PaperboundISBN-13: 978-1-111-03814-4

Principles of Electricity & Electronics for the Automotive Technician, 2eChapman©2010PaperboundISBN-13: 978-1-428-36121-8

BASIC TECHNICIAN TRAINING CONT’D

MATHEMATICS SKILLS

AUTOMOTIVE SYSTEMSBRAKES

ELECTRICITY & ELECTRONICS

Today’s TechnicianTM Automotive Brake Systems, 6ePickerill©2015PaperboundISBN-13: 978-1-285-42970-0

Automotive Electricity & Electronics, 2eSantini©2013PaperboundISBN-13: 978-1-428-39961-7

Electricity & ElectronicsCengage Learning©2011ISBN-13: 978-1-111-03474-0

Building Math Skills Online for AutomotiveCengage Learning©2015ISBN-13: 978-1-285-44654-7

Brake SystemsCengage Learning©2011ISBN-13: 978-1-111-03480-1


















































































































MindTap Automotive Trades Today’s Technician: Automotive Heating & Air Conditioning, 5eSchnubel©2016ISBN - 13: 978-1-305-27500-3

MindTap Automotive Trades Today’s Technician: Automotive Suspension & Steering Systems, 6eSchnubel©2016 ISBN - 13: 978-1-305-27503-4

Today’s TechnicianTM: Automotive Suspension & Steering Systems, 6eSchnubel©2015PaperboundISBN-13: 978-1-285-43810-8

Automotive Engines: Diagnosis, Repair, Rebuilding, 7eGilles©2015PaperboundISBN-13: 978-1-285-44174-0

Automotive Chassis: Brakes, Steering & SuspensionGilles©2005PaperboundISBN-13: 978-1-401-85630-4

Engine RepairCengage Learning©2011ISBN-13: 978-1-111-03486-3

AUTOMOTIVE SYSTEMS CONT’D

HEATING & AIR CONDITIONING

SUSPENSION & STEERING

ENGINE REPAIR & REBUILDING

Suspension and SteeringCengage Learning©2012ISBN-13: 978-1-111-03483-2

Today’s TechnicianTM: Automotive Heating & Air Conditioning, 5eSchnubel©2013PaperboundISBN-13: 978-1-133-01745-5

MindTap Automotive Trades Today’s Technician: Automotive Engine Repair & Rebuilding, 5eHadfield©2016 ISBN - 13: 978-1-305-27497-6

Today’s TechnicianTM: Automotive Engine Repair & Rebuilding, 5eHadfield©2014PaperboundISBN-13: 978-1-133-60251-4

MindTap Automotive Trades Today’s Technician: Automotive Engine Performance, 6ePickerill©2015ISBN-13: 978-1-305-27488-4

Today’s TechnicianTM: Automotive Engine Performance, 6ePickerill©2014PaperboundISBN-13: 978-1-133-59289-1

OBD II: Functions, Monitors and Diagnostic TechniquesSantini©2011PaperboundISBN-13: 978-1-428-39000-3

Today’s TechnicianTM: Advanced Engine PerformanceSchnubel©2006PaperboundISBN-13: 978-1-401-87787-3

Computerized Engine Controls, 9eHatch©2012PaperboundISBN-13: 978-1-111-13490-7

Engine PerformanceCengage Learning©2011ISBN-13: 978-1-111-03477-1

ENGINE PERFORMANCE

Heating/ACCengage Learning©2012ISBN-13: 978-1-111-03489-4


























































































NEW!

MindTap Auto Body Repair Technology, 6eDuffy©2016 ISBN - 13: 978-1-305-41125-8

NEW!

Auto Body Repair Technology, 6eDuffy©2016CaseboundISBN-13: 978-1-133-70285-6

Collision Repair and Refinishing: A Foundation Course for Technicians, 2eThomas/Jund©2014CaseboundISBN-13: 978-1-133-60187-6

Estimating for Collision RepairCrandell©1999PaperboundISBN-13: 978-0-766-80891-1

Painting for Collision RepairCrandell©1999PaperboundISBN-13: 978-0-766-80905-5

COLLISION REPAIRCollision Repair FundamentalsDuffy©2008CaseboundISBN-13: 978-1-418-01336-3

I-CAR Professional Automotive Collision Repair, 2eDuffy©2001CaseboundISBN-13: 978-0-766-81398-4

Welding for Collision RepairJeffus©1999PaperboundISBN-13: 978-0-766-80966-6

AUTOMOTIVE SERVICE MANAGEMENTThe Service Consultant: Principles of Service Management and Ownership, 2eGarner/Garner©2014CaseboundISBN-13: 978-1-133-61235-3

Managing Automotive Businesses: Strategic Planning, Personnel and FinancesGarner/Garner©2006CaseboundISBN-13: 978-1-401-89896-0

AUTOMOTIVE SYSTEMS CONT’D

NEW!

MindTap Automotive Trades Today’s Technician: Automatic Transmissions & Transaxles, 6eErjavec/Pickerill©2016 ISBN - 13: 978-1-305-25944-7

NEW!

Today’s TechnicianTM: Automatic Transmissions & Transaxles, 6eErjavec/Pickerill©2011PaperboundISBN-13: 978-1-305-25937-9

TRANSMISSIONS & TRANSAXLESNEW!

MindTap Automotive Trades Today’s Technician: Manual Transmissions & Transaxles, 6eErjavec/Ronan©2016 ISBN - 13: 978-1-305-25944-7

NEW!

Today’s TechnicianTM: Manual Transmissions & Transaxles, 6eErjavec/Ronan©2016PaperboundISBN-13: 978-1-305-26178-5

Automatic TransmissionsCengage Learning©2012ISBN-13: 978-1-111-03492-4

Manual TransmissionsCengage Learning©2012ISBN-13: 978-1-111-03495-5























































































NEW!

MindTap Heavy Duty Truck Systems, 6eBennett©2016 ISBN - 13: 978-1-305-25958-4

NEW!

Heavy Duty Truck Systems, 6eBennett©2016CaseboundISBN-13: 978-1-305-07362-3

Modern Diesel Technology: Diesel Engines, 2eBennett©2015PaperboundISBN-13: 978-1-285-44296-9CaseboundISBN-13: 978-1-285-44297-6

Modern Diesel Technology: Electricity and Electronics, 2eBell©2014PaperboundISBN-13: 978-1-133-94980-0

Modern Diesel Technology: Heating, Ventilation, Air Conditioning & Refrigeration, 2eDixon©2014PaperboundISBN-13: 978-1-133-71625-9

Modern Diesel Technology: Heavy Equipment Systems, 2eHuzij/Spano/Bennett©2014PaperboundISBN-13: 978-1-133-69336-9

Medium/Heavy Duty Truck Engines, Fuel & Computerized Management Systems, 4eBennett©2013CaseboundISBN-13: 978-1-111-64569-4

Diesel Engine VideosCengage Learning©2013ISBN-13: 978-1-133-59256-3

Modern Diesel Technology: Light Duty DieselsBennett©2012PaperboundISBN-13: 978-1-435-48047-6

Modern Diesel Technology: Mobile Equipment Hydraulics, A Systems and Troubleshooting ApproachWatson©2011PaperboundISBN-13: 978-1-418-08043-3

Modern Diesel Technology: Preventive Maintenance and InspectionDixon©2010PaperboundISBN-13: 978-1-418-05391-8

Modern Diesel Technology: Brakes, Suspension & Steering SystemsBennett©2007PaperboundISBN-13: 978-1-418-01372-1

Modern Diesel Technology: Electronic Diesel Engine Diagnosis Bennett©2007PaperboundISBN-13: 978-1-401-87079-9

Today’s TechnicianTM: Medium/Heavy Duty Truck Diesel EnginesKershaw/Bennett©2001PaperboundISBN-13: 978-0-827-37221-4

Today’s TechnicianTM: Medium/Heavy Duty Truck Electricity & ElectronicsOun©2001PaperboundISBN-13: 978-0-827-37006-7

Today’s TechnicianTM: Medium/Heavy Duty Truck Steering & SuspensionKnowles©1999PaperboundISBN-13: 978-0-827-37284-9

DIESEL TECHNOLOGY

Modern Motorcycle Technology, 2eAbdo©2013CaseboundISBN-13: 978-1-111-64064-4

Power Equipment Engine TechnologyAbdo©2011CaseboundISBN-13: 978-1-418-05388-8

MOTORCYCLE & SMALL ENGINE TECHNOLOGYSmall Engine Technology, 2eSchuster©1999CaseboundISBN-13: 978-0-827-37699-1PaperboundISBN-13: 978-0-827-37778-3

Outdoor Power EquipmentWebster©2001CaseboundISBN-13: 978-0-766-81391-5

























































































































ASE Test Preparation SeriesCengage Learning

AUTOMOTIVE SERIESASE Test Prep (G1) Maintenance and Light RepairISBN-13: 978-1-285-75380-5ASE Test Prep (A1) Engine Repair ISBN-13: 978-1-111-12703-9 ASE Test Prep (A2) Transmissions and Transaxles ISBN-13: 978-1-111-12704-6 ASE Test Prep (A3) Manual Drive Train and Axles ISBN-13: 978-1-111-12705-3 ASE Test Prep (A4) Suspension and Steering ISBN-13: 978-1-111-12706-0 ASE Test Prep (A5) BrakesISBN-13: 978-1-1111-2707-7 ASE Test Prep (A6) Electrical/Electronic Systems ISBN-13: 978-1-111-12708-4 ASE Test Prep (A7) Heating and Air Conditioning ISBN-13: 978-1-111-12709-1 ASE Test Prep (A8) Engine PerformanceISBN-13: 978-1-111-12710-7 ASE Test Prep (A9) Light Vehicle Diesel Engines ISBN-13: 978-1-111-12711-4 ASE Test Prep (L1) Advanced Engine Performance ISBN-13: 978-1-111-12713-8 ASE Test Prep (X1) Exhaust SystemsISBN-13: 978-1-111-12715-2 ASE Test Prep (P2) Parts SpecialistISBN-13: 978-1-111-12714-5 ASE Test Prep (C1) Service ConsultantISBN-13: 978-1-111-12712-1

MEDIUM/HEAVY DUTY TRUCK SERIESASE Test Prep (T1) Gasoline Engines ISBN 13: 978-1-111-12897-5ASE Test Prep (T2) Diesel EnginesISBN 13: 978-1-111-12898-2ASE Test Prep (T3) Drive TrainISBN 13: 978-1-111-12899-9ASE Test Prep (T4) BrakesISBN 13: 978-1-111-12900-2ASE Test Prep (T5) Suspension and SteeringISBN 13: 978-1-111-12901-9ASE Test Prep (T6) Electrical and Electronic SystemsISBN 13: 978-1-111-12902-6ASE Test Prep (T7) Heating, Ventilation and Air ConditioningISBN 13: 978-1-111-12903-3ASE Test Prep (T8) Preventive MaintenanceISBN 13: 978-1-111-12904-0ASE Test Prep (L2) Electronic Diesel Diagnosis ISBN 13: 978-1-133-28046-0

TRUCK EQUIPMENT SERIESASE Test Prep (E1) Installation & Repair ISBN-13: 978-1-4354-3935-1ASE Test Prep (E2) Electrical/ Electronic Systems ISBN-13: 978-1-4354-3936-8ASE Test Prep (E3) Auxiliary Power Systems ISBN-13: 978-1-4354-3937-5

COLLISION SERIESASE Test Prep (B2) Painting & Refinishing ISBN-13: 978-1-4018-3664-1ASE Test Prep (B3) Non-Structural Analysis and Damage Repair ISBN-13: 978-1-4018-3665-8ASE Test Prep (B4) Structural Analysis and Damage Repair ISBN-13: 978-1-4018-3666-5ASE Test Prep (B5) Mechanical and Electrical Components ISBN-13: 978-1-4018-3667-2ASE Test Prep (B6) Damage Analysis and Estimation ISBN-13: 978-1-4018-3668-9

SPANISH AUTOMOTIVE SERIES(A1) Reparación de Motores, 2a Edición ISBN-13: 978-1-4018-1014-6(A2) Transmission Automática/Eje de Transmission Automática, 2a Edición ISBN-13: 978-1-4018-1015-3(A3) Tren de y Mando Ejes Manuales, 2a Edición ISBN-13: 978-1-4018-1016-0 (A4) Suspensión y Dirección, 2a Edición ISBN-13: 978-1-4018-1017-7(A5) Frenos, 2a Edición ISBN-13: 978-1-4018-1018-4(A6) Sistemas Eléctricos/Electrónicos, 2a Edición ISBN-13: 978-1-4018-1019-1(A7) Calefacción y Aire Acondicionado, 2a Edición ISBN-13: 978-1-4018-1020-7(A8) Funcionamiento de Motores, 2a Edición ISBN-13: 978-1-4018-1021-4(L1) Especialista en el Funciommiato Avansado de Motores, 2a Edición ISBN-13: 978-1-4018-1022-1(P2) Especialista en Partes de Automovil, 2a Edición ISBN-13: 978-1-4018-1023-8(X1) Sistemas de Escape, 2a Edición ISBN-13: 978-1-4018-1024-5

SPANISH COLLISION SERIES(B2) Pintura y Acabado, 2a Edición ISBN-13: 978-1-4018-9255-5(B3) Análisis No Estructural y Reparación de Daños, 2a Edición ISBN-13: 978-1-4018-2544-7(B4) Análisis Estructural y Raparación de Daños, 2a Edición ISBN-13: 978-1-4018-9131-2(B5) Componentes Mecánicos y Eléctricos, 2a Edición ISBN-13: 978-1-4018-7759-0(B6) Análisis y Estimación de Daños, 2a Edición ISBN-13: 978-1-4018-6573-3Complete Set (Examenes B2-B6) ISBN-13: 978-1-4018-4155-3

Award Winning Online ASE Technician Test Preparation (TTP) also available. Visit www.trainingbay.cengage.com/ttp or Ask your rep for more details!

ASE PREPARATION

http://www.trainingbay.cengage.com/ASE.aspx






NATEF CERTIFICATION

NATEF Standards Job Sheets Area A1, 4e Erjavec/Pickerill ©2015ISBN-13: 978-1-111-64697-4


NATEF Standards Job Sheets Area A3, 4e Erjavec/Pickerill©2015 ISBN-13: 978-1-111-64699-8






Rentals, eBooks, looseleaf… you’ll find options to save students money and boost engagement.

More Choice = More Value

Visit www.cengage.com and search by ISBN to learn more










978-1-111-64699-8

978-1-111-64699-8

978-1-111-64699-8

978-1-111-64699-8

978-1-111-64699-8


























The Power of Personalization MindTap’s Dashboards and Reader help

you build your course to maximize engagement.

Cutting Edge Content Unique content in your MindTap course

helps turn memorizers into higher-level thinkers.

MindTap’s Progress App Enjoy the benefits of real-time student

analytics for early intervention and grade improvement.

MindTap is the digital learning solution that helps instructors transform today’s students into critical thinkers.

MindTap empowers students. Personalized content in one easy-to-use interface helps them achieve better grades, and the new MindTap Mobile App allows for learning anytime, anywhere with flashcards, quizzes and notifications.

www.cengage.com/mindtap

Engaged with you so you can engage with themYou have more demands than ever on your time and we are here to help, providing ongoing training and support, customizing course materials to meet your specific goals, and sharing innovative classroom strategies through our in-house team of professional educators*.

Learn more at: www.cengage.com/services

* Cengage Learning has been accredited as an Authorized Provider by the International Association for Continuing Education and Training (IACET)

BOTTOM BRANDING BARSource Code: M15010111ISBN: 978-1-285-49785-3

Visit www.cengage.com/automotive/cg and search by ISBN to request complimentary online review copies and find information on online solutions, supplements, bundles, and alternative formats.Or contact your Learning Consultant/Sales Representative at 1-800-423-0563.

Documents

AUR30612 - Certificate III in Light Vehicle Mechanical ... Mapping Combined.pdf · AUR30612 - Certificate III in Light Vehicle Mechanical Technology . Text name: Automotive Technology: