Aug 27, 2008 Biochemistry 111 Thang Chiu, MEB 7E1, x2024

Aug 27, 2008

Biochemistry 111

Thang Chiu, MEB 7E1, x2024

Sequence Alignments and Sequence Alignments and Database SearchingDatabase Searching

Sequence Alignments and Sequence Alignments and Database SearchingDatabase Searching

Adapted from DKW lecture

Why compare protein sequences?

Significant sequence similarities allow associations based upon

known functions.

Protein A of interest to you.

ornithine decarboxylase?

Extracted from ISMB2000 tutorial,WR Pearson, U. of Virginia

Possible for proteins to possess high sequence identity/ similarity between segments and not be homologous

1) Homologous proteins (ie having similar structures) need not posess high sequence identity / similarity: S. griseus trypsin 36% S. griseus protease A 25%

Homology vs. similarity

2) cytochrome c4, has reasonably high sequence identity/ similarity with trypsins, yet does not have common ancestor, nor common fold.

3) subtilisin has same spatial arrangement of active site residues, but is not related to trypsins

Homologous proteins always share a common three-dimensional fold, often with common active or binding site.

Proteins that share a common ancestor are homologous.

Proteins that possess >25% identity across entire length generally will be homologous.

Proteins with <20% identity are not necessarily not homologous


Homologous sequences are either: 1) orthologous, or 2) paralogous

•For orthologs - sequence divergence and evolutionary relationships will agree.•For paralogs - no necessary linkage between sequence divergence and speciation.


Orthologous cyctochrome c isozymes

Hemoglobins contain both orthologs and paralogs

Orthologs - sequence differences arises from divergence in different species (i.e. cyctochrome c) Paralogs - sequence differences arise after gene duplication within a given species (i.e. GPCRs, hemoglobins)


We’ve all seen and/or used sequence alignments, but howare they accomplished?

Sequence searches and alignments using DNA/RNA are usually not asinformative as searches and alignments using protein sequences. However.DNA/RNA searches are intuitively easier to understand:

AGGCTTAGCAAA........TCAGGGCCTAATGCG|||||||| ||| ||||||||||| |||AGGCTTAGGAAACTTCCTAGTCAGGGCCTAAAGCG

The above alignment could be scored giving a “1” for each identical nucleotide,A zero for a mismatch, and a -4 for “opening a “gap” and a -1 for each extensionof the gap. So score = 25 – 11= 14

Protein sequence alignments are much more complicated. How would this alignment be scored?

ARDTGQEPSSFWNLILMY.........DSCVIVHKKMSLEIRVH| | | | | ||| | | || |||AKKSAEQPTSYWDIVILYESTDKNDSGDSCTLVKKRMSIQLRVH

Unlike nucleotide sequence alignments, which are either identical ornot identical at a given position, protein sequence alignments include“shades of grey” where one might acknowledge that a T is sort of equivalent to an S etc. But how equivalent? What number would youassign to an S-T mismatch? And what about gaps? Since alanine isa common amino acid, couldn’t the A-A match be by chance? SinceTrp and Cys are uncommon, should those matches be given higherscores?

Do you see that accurately aligning sequences and accuratelyfinding related sequences are the same problem?

Needleman-Wunsch global sequence alignment (JMB (1970), 48, 443-453)

A B C N J RAJCJNR

A B C N J RA 1 0 0 0 0 0J 0 1 1 1 2 1C 0 1 1 0 0 0J 0 1 0 0 1 0N 0 1 0 1 0 0R 0 1 0 0 0 1

SUM S(I,j) with max of S(I,j) of previous column/row

A B C N J RA 1 0 0 0 0 0J 0 1 1 1 2 1C 0 1 2 1 1 2J 0 1 1 2 3 2N 0 1 1 3 2 3R 0 1 1 2 2 4

A B C N J RA 1 0 0 0 0 0J 0 0 0 0 1 1C 0 0 1 0 0 0J 0 0 0 0 1 0N 0 0 0 1 0 0R 0 0 0 0 0 1

A B C N J RA 1 0 0 0 0 0J 0 0 0 0 1 0C 0 0 1 0 0 0J 0 0 0 0 1 0N 0 0 0 1 0 0R 0 0 0 0 0 1

Assign score to all cells

A B C N J RA 1 0 0 0 0 0J 0 1 1 1 2 1C 0 1 2 1 1 2J 0 1 1 2 3 2N 0 1 1 3 2 3R 0 1 1 2 2 4

Traceback

A B C N J RA J C J N R

A B C N J RA J C J N R

OR

Databases

Nucleotide: GenBank (NCBI), EMBL, DDBJ

Protein: SwissProt, TrEMBL, GenPept(GenBank)

Huge databases – share much information. Many entries linked to other databases (e.g. PDB). SwissProt small but well “curated”. NCBI non-redundant(nr) protein sequence database is very large but sometimes confusing.

These databases can be searched in a number of ways. Can search only human or metazoan sequences. Can eliminate entries made before a givenDate. Etc.

Protein Sequence Records from PRF A series of digits (often six or seven)followed by a letter, e.g.:

1901178A

RefSeq Nucleotide Sequence Records Two letters, an underscore bar, and six digits, e.g.:mRNA records (NM_*):NM_000492genomic DNA contigs (NT_*):NT_000347 complete genome or chromosome (NC_*):NT_000907 genomic region (NG_*):

NG000019

Type of Record Sample accession format

GenBank/EMBL/DDBJ Nucleotide

SequenceRecords One letter followed by five digits, e.g.:U12345Two letters followed by six digits, e.g.:

AY123456, AF123456 GenPept Sequence Records(which contain the amino acid translations from GenBank/EMBL/DDBJ records that have a coding region feature annotated on them)

Three letters and five digits, e.g.:

AAA12345 Protein Sequence Records from SWISS-PROT

and PIR All are six characters:Character/Format1 [O,P,Q]2 [0-9]3 [A-Z,0-9]4 [A-Z,0-9]5 [A-Z,0-9]6 [0-9]e.g.:P12345 and Q9JJS7

What do all those numbers mean?

NC

BI

RefSeq Protein Sequence Records Two letters (NP), an underscore bar, and six digits, e.g.:

NP_000483 RefSeq Model (predicted) Sequence Records from the Human Genome annotation process

Two letters (XM, XP, or XT), an underscore bar, and six digits, e.g.:

XM_000583 Protein Structure Records PDB accessions generally contain one digit

followed by three letters, e.g.:1TUPMMDB ID numbers generally contain four digits, e.g.:3973The record for the Tumor Suppressor P53 Complexed With DNA can be retrieved by either number above

Continued….

GI numbers:a series of digits that are assigned consecutively by NCBI to each sequence it processes. Version numbers:consist of the accession number followed by a dot and a version number.

Nucleotide sequence: GI: 6995995VERSION: NM_000492.2

Protein translation: GI: 6995996VERSION: NP_000483.2

>gi|897557|gb|AAA98443.1| TIAM1 protein

NC

BI

http://www.ornl.gov/sci/techresources/Human_Genome/posters/chromosome/geneguide.shtml

We’ve got the data, now how do we score/search?First, we need a way to assign numbers to “shadesof grey” matches.

Genetic code scoring system – This assumes that changes in proteinsequence arise from mutations. If only one point mutation is neededto change a given AA to another (at a specific position in alignment),the two amino-acids are more closely related than if two point mutationswere required.

Physicochemical scoring system – a Thr is like a Ser, a Trp is not likean Ala……

These systems are seldom used because they have problems. Why try to second guess Nature? Since there are many related sequences out there, we can look at some (trusted) alignments to SEE which sub-stitutions have occurred and the frequency with which they occur.

PAM (Percent Acceptable Mutation) matrices

• Are derived from studying global alignments of well-characterized protein families. • PAM1 = only 1% of residues has changed (ie short evolutionary distance) • Raise this to 250 power to get 250% change of two sequences (greater evolutionary distance), or about 20% sequence identity. • Therefore, a PAM 30 would be used to analyze more closely related proteins, a PAM 400 is used for finding and analyzing distantly related proteins. • PAMx = PAM1x

(Dayhoff, Atlas of Protein Sequence and Structure, vol. 5, suppl 3, p 345-352)

Are derived from studying local alignments (blocks) of sequences from related proteins that differ by no more than X%. (Henikoff & Henikoff, PNAS ‘92, 89, p10915-10919) 1)In other words, one might use the portions of aligned sequences from related proteins that have no more than 62% identity (in the portions or blocks) to derive the BLOSUM 62 scoring matrix.

2)One might use only the blocks that have <80% identity to derive the BLOSUM 80 matrix.

Block substitution matrices (BLOSUM)

3) BLOSUM and PAM substitution matrices have the opposite effects:

a)The higher the number of the BLOSUM matrix (BLOSUM X), the more closely related proteins you are looking for.

a)The higher the number of the PAM matrix (PAM X), the more distantly related proteins you are looking for.

Extracted from ISMB2000 tutorial,WR Pearson, U. of VirginiaPAM250 matrix

Note that for identical matches, scores vary depending upon observed frequencies. That is, rare amino acid (i.e. Trp) that are not substituted have high scores; frequently occuring amino acids (i.e. Ala) are down-weighted because of the high probability of aligning by chance.

Amino acid substitution matrices

•Negative scores - unlikely substitutions

Gap penalties – Intuitively one recognizes that there should be a penaltyfor introducing (requiring) a gap during identification/alignment of a givensequence. But if two sequences are related, the gaps may well be locatedIn loop regions which are more tolerant of mutational events and probablyhave little impact on structure. Therefore, a new gap should be penalized, but extending an existing gap should be penalized very little.

Filtering – many proteins and nucleotides contain simple repeats or regions of low sequence complexity. These must be excluded from searches and alignments. Why?

Significance of a “hit” during a search - More important than an arbitraryscore is an estimation of the likelihood of finding a hit through pure chance. Ergo the “Expectation value” or E-value. E-values can be as low as 10-70.

E-valueSo, for sufficiently large databases (so can apply statistics):

E = Kmne-S

m- query lengthn - database lengthE - expectation valueK - scale factor for search space (database) - scale factor for scoring systemS - score, dependent on substitution matrix, gap-penalties, etc.

Doubling either sequence string doubles number of sequences with a given expectation value; similarly, double the score and expectation value decreases exponentiallyExpectation value - probability that given score will occur by chance given the query AND database strings


• Must account for increases in similarity score due to increase in sequence length searched.

• Scaling with against the sequence length allows the detection of distantly-related sequences.

• solids = individual sequence• opens = average score

Removing length bias from scoring statistics


Global scores require alignment of entire sequence length.Cannot be used to detect relationships between

domains in mosaic proteins.

Global versus local alignments

Local alignments are necessary to detect domains within mosaic proteins, internal duplications.

1) Break query up into “words” e.g. ASTGHKDLLV AST

WORDS STG TGH2) Generate expanded list of words that would match with (i.e. PAM250) a score of at least T – You’re acknowledging that you may not have any

exact matches with original list of words.

3) Use expanded list of words to search database for exact matches.

4) Extend alignments from where word(s) found exact match.

Basic local alignment search tool (BLAST)

Heuristic algorithm – Uses guesses. Increases speed without a greatloss of accuracy (BLASTP, FASTA (local Hueristic), S-W local rigorous,Needleman-Wunsch global, rigorous)

Pictorial representation of BLAST algorithm (Basic Local Alignment Search Tool).

Query sequence

Words (they overlap)

Expand list of words

Search database, find exact hits, extend alignments

Report sorted list of hits

Nucleotide BLAST looks for exact matches

Protein BLAST requires two hits

GTQITVEDLFYNI

SEI YYN

ATCGCCATGCTTAATTGGGCTT

CATGCTTAATT

neighborhood words

exact word match

one hit

two hits

NC

BI

BLAST

FASTA

Instead of breaking up query into words (and then generating a list of similar words), find all sequences in the database that containshort sequences that are exact or nearly exact matches for sequenceswithin the query. Score these and sort. Sort of reverse methodology toBLAST

Que

ry s

eque

nce

Database sequence

Protein database

mouse over

link to entrez

sorted by e values

5 X 10-98

LocusLink

S’ = (λS –lnK)/ln2

E=mn2-S’

Identifying distant homologies (use several different query sequences)

Examine output carefully. A lack of statistical significance doesn’t necessarily mean a lack of homology!


Also remember - If A is homologous to B, and B to C, then A should be homologous to C

PSI-BLAST

Very sensitive, but must not include a non-member sequence!

1) Regular BLAST search2) Sequences above a certain threshold (< specified E-value) are included. Assumed to be related proteins. This group of sequences is used to define a “profile” that contains the essence of the “family”.3) Now with the important sequence positions highlighted, can look for more distantly related sequences that should still have the essence of the protein family.4) Inclusion of more distantly related sequences modifies the profile further (further defines the essence) and allows for identification of even more distantly related sequences. Etc.

Note: PSI-BLAST may find and then subsequently lose a homologous sequence during the iteration process! “Drifting” of the program, would be the gradual loss of close homologs during the iteration process.

>gi|113340|sp|P03958|ADA_MOUSE ADENOSINE DEAMINASE (ADENOSINE AMINOHMAQTPAFNKPKVELHVHLDGAIKPETILYFGKKRGIALPADTVEELRNIIGMDKPLSLPGFLAKFDYYVIAGCREAIKRIAYEFVEMKAKEGVVYVEVRYSPHLLANSKVDPMPWNQTEGDVTPDDVVDLVNQGLQEQAFGIKVRSILCCMRHQPSWSLEVLELCKKYNQKTVVAMDLAGDETIEGSSLFPGHVEAYEGAVKNGRTVHAGEVGSPEVVREAVDILKTERVGHGYHTIEDEALYNRLLKENMHFEVCPWSSYLTGAWDPKTTHVRFKNDKANYSLNTDDPLIFKSTLDTDYQMTKKDMGFTEEEFKRLNINAAKSSFLPEEEKKELLERLY

e value cutoff for PSSM

PSI-BLAST: initial run

NC

BI

PSI-BLAST: initial run N

CB

I

Other purine nucleotide metabolizing enzymes not found by ordinary BLAST

PSI-BLAST: first PSSM search

iteration 1

iteration 2

PSI-Blast ofhuman Tiam1

PSI-BLAST: importance of original query (remember, if A is like B….)

iteration 2

iteration 1

iteration 3

Ras-binding domains

PSI-Blast ofmouse Tiam2 (~90% identity with human Tiam1)

PSI-BLAST: importance of original query

Active site serineWeakly conserved serine

Position specific scoring matrix (PSSM)(learning from your “hits”)

A R N D C Q E G H I L K M F P S T W Y V 206 D 0 -2 0 2 -4 2 4 -4 -3 -5 -4 0 -2 -6 1 0 -1 -6 -4 -1 207 G -2 -1 0 -2 -4 -3 -3 6 -4 -5 -5 0 -2 -3 -2 -2 -1 0 -6 -5 208 V -1 1 -3 -3 -5 -1 -2 6 -1 -4 -5 1 -5 -6 -4 0 -2 -6 -4 -2 209 I -3 3 -3 -4 -6 0 -1 -4 -1 2 -4 6 -2 -5 -5 -3 0 -1 -4 0 210 S -2 -5 0 8 -5 -3 -2 -1 -4 -7 -6 -4 -6 -7 -5 1 -3 -7 -5 -6 211 S 4 -4 -4 -4 -4 -1 -4 -2 -3 -3 -5 -4 -4 -5 -1 4 3 -6 -5 -3 212 C -4 -7 -6 -7 12 -7 -7 -5 -6 -5 -5 -7 -5 0 -7 -4 -4 -5 0 -4 213 N -2 0 2 -1 -6 7 0 -2 0 -6 -4 2 0 -2 -5 -1 -3 -3 -4 -3 214 G -2 -3 -3 -4 -4 -4 -5 7 -4 -7 -7 -5 -4 -4 -6 -3 -5 -6 -6 -6 215 D -5 -5 -2 9 -7 -4 -1 -5 -5 -7 -7 -4 -7 -7 -5 -4 -4 -8 -7 -7 216 S -2 -4 -2 -4 -4 -3 -3 -3 -4 -6 -6 -3 -5 -6 -4 7 -2 -6 -5 -5 217 G -3 -6 -4 -5 -6 -5 -6 8 -6 -8 -7 -5 -6 -7 -6 -4 -5 -6 -7 -7 218 G -3 -6 -4 -5 -6 -5 -6 8 -6 -7 -7 -5 -6 -7 -6 -2 -4 -6 -7 -7 219 P -2 -6 -6 -5 -6 -5 -5 -6 -6 -6 -7 -4 -6 -7 9 -4 -4 -7 -7 -6 220 L -4 -6 -7 -7 -5 -5 -6 -7 0 -1 6 -6 1 0 -6 -6 -5 -5 -4 0 221 N -1 -6 0 -6 -4 -4 -6 -6 -1 3 0 -5 4 -3 -6 -2 -1 -6 -1 6 222 C 0 -4 -5 -5 10 -2 -5 -5 1 -1 -1 -5 0 -1 -4 -1 0 -5 0 0 223 Q 0 1 4 2 -5 2 0 0 0 -4 -2 1 0 0 0 -1 -1 -3 -3 -4 224 A -1 -1 1 3 -4 -1 1 4 -3 -4 -3 -1 -2 -2 -3 0 -2 -2 -2 -3

Serine scored differently in these two positions

Active site nucleophile

Position specific scoring matrix (PSSM)

Multiple sequence alignments (MSAs)

In this example, an MSA is used to identify regions of high sequence conservation presumably reflecting structural and functional constraints. Useful for delimiting known domains and potential new functional regions (e.g. the Ras-binding domain in yellow and the blue box of currently unknown function).

Fun with MSA...

MSA used to locate functional residues and domain boundaries in homologs of Dbl-proteins with known structure (Dbs and Tiam1).

Red amino acids directly interact with GTPases. Blue residues directly interact with phosphoinositides.

Tutorial on Jalview for MSA

1)Determining domain boundary for construct to express2)Secondary, possible 3D structural information to help

narrow down 5’ and 3’ regions for PCR primers

Homology If two proteins are homologous, they have a common fold and a common ancestor

If two proteins have >25% identity across their entire length, they are likely to be Homologs. However, sometimes true homologs have quite low sequence identity!

Orthologs Homologous (and equivalent) proteins from different species.Arise from speciation.

Paralogs Homologous (and equivalent) proteins found in same species.Divergence of sequences NOT from speciation.

Alignments How to score?Minimum # of mutations?, Physicochemical properties (as perceived by us)?, Or learn from nature?

Scoring schemes PAM, BLOSUM

What you should know

E values What it means in words

E = Kmne -λS

Alignment algorithms BLAST (Basic Local Alignment Search Tool)FASTA (Fast Alignment)Needleman-Wunsch (Global alignment)

Why use local alignment algorithm?

Documents

Aug 27, 2008 Biochemistry 111 Thang Chiu, MEB 7E1, x2024