FAX: (713) 672-7905

1304 Langham Creek Drive, Suite 454, Houston, Texas 77084

E-MAIL: pmi@pmi-auction.com • WEBSITE: www.pmi-auction.com

HOUSTON • DALLAS • ST. LOUIS

PHONE: (713) 691-4401

Sale Conducted By: In Conjunction With:

APPRAISERS

AUCTIONEERS LIQUIDATORS

RECOVERYINVESTM

ENT SERVICES

INVESTMENT RECOVERY SERVICES3421 North Sylvania Avenue, Fort Worth, TX 76111tel: 800.583.1111 • 817.222.9848 fax: 817.834.4075WWW.IRSAUCTION.COM

CONDENSER COIL & WRAPPER MANUFACTURING FACILITY

Featuring: (2) Oak Fin Presses, (5) Burr Oak Hairpin Benders, (2) Oak Vert. Expanders, (2) Condenser Coil Brazing Ovens, (2) Detroit Tool Condenser Wrapper Press Systems, Wide Array of Plant Support Equip.,

Material Handling Equip., M.R.O. Items, & Much, Much More!

At the Premises of

NORDYNE, INC.2501 Boonslick Drive

BOONVILLE, MO 65233(See Directions on Back Page)

AUCTION: THURS., NOV. 5 10:00 A.M.

INSPECTION: Wednesday, November 4 9:00 A.M. to 4:00 P.M. & Morning of Sale

BUYER’S PREMIUM: 15% ONSITE • 18% WEBCAST

Read Partial Terms and Conditions on Back Page of Brochure

AUCTION

On-Site Bidding in Boonville, MO or Bid Via Webcast at

OAK HAIR PIN BENDER

DETROIT TOOL CONDENSER WRAPPER PRESS CELL

OAK 100 T. FIN PRESSES

CYBERTECH INT’L BRAZING SYSTEMOAK VERTICAL TUBE EXPANDER

2AVAILABLE

5AVAILABLE

2 32 3

OAK 100 T. FIN PRESS

OAK VERTICAL TUBE EXPANDER CYBERTECH INTERNATIONAL BRAZING SYSTEM

CONDENSER LACING STATIONS

(4) CUSTOM BUILT, geared alignment rods, accessories, foot pedal control.

FIN PRESSES(2) OAK MDL. 54-FP-3B, new 1996 and 1993, 100 T. cap., 1-1/2" stroke, 9"–13" shut ht. on 5" bol-ster, 9"–17" withdrawal travel, 51" x 48" die area (R-L, F-B), spds: 133–390 SPM, 3-pos. rotary stacker table w/elevator, Oak PLC control system, Oak Mdl. SRU-M-K 8" payoff reel w/manual ex-pansion, pwrd. slip roll, vacuum towers, Oak Mdl. FDM-975-2 and 3 fin dies (.387" hole dia., 3/8" x 1" x .866" pattern, 48 rows, (4) draw stations), S/N 1522 (1993), S/N 1531 (1996).

VERTICAL TUBE EXPANDERS

OAK MDL. CSE-M328, new 1988, tilt up coil tbl., variable spd. expansion, light curt, S/N CSE-M-328-8188.OAK MDL. CSE-M30, new 1998, Allen Bradley Panelview control, tilt up coil tbl., variable spd. expansion, light curtain, S/N CSE-M30-081798-1 (1998).

HAIR PIN BENDERSOAK MDL. VBHB-M7, new 1998, (7) tubes, (2) plain entry straightener, standard straightener, caterpillar feed, bending head, skid mtd., S/N M710-14 LH 081798.OAK MDL. VBHB-M7, new 1992 L.H. bend, 6-station tower, 7-tube through feed straight-ener, caterpillar feed, bending head, skid mtd., hyd. driven, S/N M710-6LH-031492.OAK MDL. DVBHB-M12, new 1994, R.H. entry, Microwiz digital counters, (2) plain straightener and cut-off assembly, coil feed tower, arranged for (12) tubes ttl. through put – (6) tubes per side, S/N M124-3RH-030294.(2) OAK MDL. DVBHB-M12, new 1994, R.H. entry, Microwiz digital counters, (2) plain straightener and cut-off assembly, coil feed tow-er, arranged for (12) tubes ttl. through put – (6) tubes per side S/N M144-118078 and S/N M128-2LH-081798 (Both of these Hair Pin Benders are located offsite at 1747 Cravens Rd., Poplar Bluff, MO 63901 and will be sold by photo).

POWER SQUARING SHEARWYSONG 10' X 3/16" MDL. 1010, 10' L.H. squaring arm, (2) front suppt. arms, Wysong PC100 CNC shear gauge, foot pedal control, output conveyor, S/N P32-2069.

VERTICAL COIL BRAZING SYSTEMS

(2) CYBERTECH INTERNATIONAL BRAZING SYSTEMS, gas fired, dual air blast blowers, Allen Bradley Panelview PLC controls, gas burn-ers, stainless steel shielding (One of these units is located offsite at 1747 Cravens Rd., Poplar Bluff, MO 63901 and will be sold by photo); UNIBILT POWER AND FREE OVERHEAD CON-VEYOR SYSTEM, assorted carriers; WILDECK 36"L. X 9'W. PRE-FABRICATED MEZZANINE, approx. 8' deck ht., diamond plate staircase and safety railing, Job No. 12352; WILDECK 14'L. X 7'W. MEZZANINE, approx. 8' deck ht.

ELEVATING COIL CARBURR OAK 10,000-LB. CAP., swivelling top, pendant control.

RECLAIM SYSTEMSERV-I-QUIP, Corken 7-1/2 HP reciprocating compressor, valves, chiller unit, 400 gal. receiv-er tank (2013).

OAK HAIR PIN BENDER

5AVAILABLE

NITROGEN GENERATOR SYSTEMS

(2) SERV-I-QUIP MDL. WT3600, container trunnions, skid mtd.

2AVAILABLE

2 32 3

TOP/SIDE CONDENSER WRAPPER PRESS CELL

• BRADBURY MDL. BR10 36" PWRD. PAYOFF REEL, 10,000-lb. cap., hyd. mandrel expansion, hyd. drive, S/N N/A.

• BRADBURY 5-ROLL POWERED STRAIGHTENER, w/infeed and outfeed cascade rolls, 36" max. width, Mdl. RS35-6-36, S/N 21636.

• BRADBURY MDL. FRS SERVO FEEDER UNIT, cascade infeed rolls, Servo driven rolls, air pinch, edge guides, S/N 21639.

• DETROIT TOOL HYDRO-MECHANICAL PUNCH PRESS, approx. 48" x 144" bed, 4-post design, Allen Bradley Panelview PLC control, S/N 1190.

• BRADBURY DUPLEX ROLLFORMER, adj. width up to 36", (10) stands, chain driven.

• BRADBURY SCISSOR LIFT, 36"W. x 12'L., belt conveyor top.• BRADBURY WING BENDER, for forming condenser cabinet shrouds.• The line includes assorted roller and belt conveyor.

PRECISION INSTRUMENTS

PRECISION GRINDING VISES; GROUND V BLOCKS; STARRETT MI-CROMETERS up to 12"; MITUTOYO 24" DIGITAL HT. GAUGE; VERNIER HT. GAUGE; RADIUS AND TANGENT DRESSERS; PIN GAUGE SETS; GAUGE BLOCK SET; DEPTH MICROMETER.

BRADBURY DUPLEX ROLLFORMER

VIEW OF CONDENSER WRAPPER CELL

BRADBURY STRAIGHTENER AND PRESS FEED

BRADBURY DUPLEX ROLLFORMER

BRADBURY WING BENDER

• BRADBURY MDL. BR10 36" PWRD. PAYOFF REEL, 10,000-lb. cap., hyd. mandrel expansion, hyd. drive, S/N 21655.

• BRADBURY 5-ROLL POWERED STRAIGHTEN-ER, w/infeed and outfeed cascade rolls, 36" max. width, Mdl. RS35-6-36, S/N 21686.

DETROIT TOOL PUNCH PRESS

SERV-I-QUIP RECLAIM SYSTEMWYSONG 10' X 3/16" POWER SQUARING SHEAR

• BRADBURY MDL. FRS SERVO FEEDER UNIT, cascade infeed rolls, Servo driven rolls, air pinch, edge guides, S/N 21687.

• DETROIT TOOL HYDRO-MECHANICAL PUNCH PRESS, approx. 48" x 144" bed, 4-post design, Allen Bradley Panelview PLC control, S/N 1190.

• BRADBURY DUPLEX ROLLFORMER, adj. width up to 36", (10) stands, chain driven.

• BRADBURY SCISSOR LIFT, 36"W. x 12'L., belt conveyor top.

• BRADBURY WING BENDER, for forming condenser cabinet shrouds, S/N 21665.

• The line includes assorted roller and belt conveyor.

BOTTOM/BACK CONDENSER WRAPPER PRESS CELL

On-Site Bidding in Boonville, Missouri or Bid Via Webcast at

4 5

<KENT HYDRAULIC SURFACE GRINDER

CLAUSING COLCHESTER 15" X 50" ENGINE LATHE

>LANDIS

UNIVERSAL CYLINDRICAL

GRINDER

>ACRA VERTICAL

MILLING MACHINE

GRINDERSLANDIS MDL. 10X20 UNIVERSAL CYLINDRICAL GRINDER, Type 1R, swing-down internal attach., 4-jaw independent chuck on swivel work head, swivel wheel head, tbl. mtd. dresser, S/N 864-9.

KENT MDL. KGS-407AHD HYDRAULIC SURFACE GRINDER, 16" x 24" cap., programmable incremental downfeed, Newall 2-axis D.R.O., over-the-wheel dresser, S/N 881155-1.

BOYAR SCHULTZ 6" X 12" MDL. H612 HAND FEED SURFACE GRINDER, 1 HP direct drive spndl., cast iron base, perm. magnetic chuck, S/N 27579.

DOALL 6" X 12" MDL. DH-612 HAND FEED SURFACE GRINDER, perm. magnetic chuck, S/N 138-662255.

GRINDER ACCESSORIES, incl. spin index fixtures, motorized 5C collet fixture, 6" x 12" magnetic sine plate, 5C collets.

TOOLROOM MACHINERYACRA MDL. AM-4V VERTICAL TURRET MILL, 10" x 50" tbl., hardened and ground ways, variable spd. head, spds.: 60–4,200 RPM, long. pwr. feed, Newall 2-axis D.R.O., S/N 95660.

TWS MDL. RD-800S RADIAL ARM DRILL, approx. 3' x 9" column, spds.: 88–1,500 RPM, H.D. box tbl., S/N 9316.

CLAUSING COLCHESTER 15" X 50" ENGINE LATHE, spds.: 25–2,000 RPM, 2-3/4" spndl. hole, inch/metric thdng., taper attach., 10" dia. 3-jaw chuck, steadyrest.

MAZAK MATE 14" X 40" GAP BED ENGINE LATHE, spds.: 76–1,250 RPM, 1-1/2" spndl. hole, 8" dia. 3-jaw chuck, inch/metric threading, S/N 24063.JAPAX MDL. LU3B WIRE EDM MACHINE, 5-axis, Japax Mdl. JAPT3F CNC control.DELTA ROCKWELL 15" PEDESTAL DRILL PRESS, tbl. raising mechanism.DOALL MDL. 25125 GEARED HEAD DRILL, spds.: 85–1,450 RPM, production tbl. w/tbl. raising mecha-nism, S/N 55058.WILTON COMBINATION BELT AND DISC SANDER, 6"W. belt, 12" disc, tilting tbls.SOLBERGA GEARED HEAD DRILL, .65 kW, spds.: 120–1,548 RPM, production tbl.ARBOGA MDL. B2508 GEARED HEAD DRILL, spds.: 125–3,480 RPM.ZERO MDL. BNP-5-6 GLOVE BOX TYPE BLAST CAB-INET, 48"W. x 24" dp. x 30" ht. cabinet, recirculating shot system, Zero cabinet dust collector, S/N 21614.APEX 20" DISC SANDER, fabricated stand, tilting tbl.HURCO MDL. BMC-4020 VERT. MACHINING CEN-TER, Hurco SSM CNC control, 40" x 20" x 20" travels, S/N B42591004076AC (This vert. machining center is located offsite at 1747 Cravens Rd., Poplar Bluff, MO 63901 and will be sold by photo).

MISCELLANEOUS FABRICATING EQUIPMENT

COE MDL. CPPS-P0225-30 SERVO FEED SYSTEM, 30"W., 5-roll input straightener, Mdl. BG2 program-mable control unit, adj. ht. cabinet, S/N 15258-3.

HAVIR PRESS-RITE 40 T. CAP. MDL. 40 OBI PUNCH PRESS, dual palm button controls, light curtain safety device, S/N ACF-198.WESTBEND APPROX. 10,000-LB. CAP. COIL TIPPER, gear motor drive.TAYLOR WINFIELD ROTARY CIRCULAR SEAM WELDER, 150 KVA, approx. 18" throat depth, universal shaft drive, Entron weld control unit, S/N 81893N.MILLER DIALARC 250 ARC WELDER, 250 amps @ 30 v., 50% duty cycle, sgl. phase operation, running gear.MILLER MILLERMATIC 250 INTEGRATED MIG WELDER, 200 amps @ 28 v., 60% duty cycle, MIG gun, running gear.ROPER WHITNEY 48" X 20 GA. CAP. BOX AND PAN BRAKE, assorted fingers, S/N 2034-9-79.RIDGID MDL. 300 PIPE THREADER, cut-off and reamer, mtd. on tri-stand.CRAFTSMAN 10" TABLE SAW, tilting arbor, w/stand.MILLER MDL. CP250TS MIG WELDER, wire feed, running gear.LINCOLN IDEALARC MDL. TIG250/250, 200 amps @ 28 v., 40% duty cycle, tig torch, foot pedal control.ROTEX 10-STATION FABRICATION PUNCH, on fabricated steel stand.

COE 30" SERVO PRESS FEED

4 5

CANTILEVER COORDINATE MEASURING MACHINES

BROWN & SHARPE SYSTEM B, Renishaw MIP tilting probe holder, 48" x 96" cast iron T-slotted plate, S/N 1293-133.

MITUTOYO “BRIGHT APEX” DCC, Mdl. BRT-A1230-4010-3313, approx. 47.2" x 118" x 30" measuring range, S/N MO50311 (This CMM is located offsite at 1747 Cravens Rd., Poplar Bluff, MO 63901 and will be sold by photo).

RAW MATERIALRACK OF ASSORTED MATERIAL, incl. hot roll bars, rounds, cold roll bar stock, flat aluminum, aluminum bars, aluminum bar stock.

LARGE QTY. OF USED COPPER PIPING (salvaged from the facility) on skids.

MISCELLANEOUS MACHINE SHOP EQUIPMENT

LEYBOLD TRIVAC VACUUM PUMP w/roller stand; WINDSOR AIR MOVER FAN; MTD 600 SERIES SNOW BLOWER w/snow chains; PNEUMATIC RIGHT ANGLE GRINDERS; PNEUMATIC IMPACT WRENCHES; DEWALT ELECTRIC HAMMER DRILL; SEVERAL MIL-WAUKEE RECIPROCATING SAWS; MILWAUKEE RIGHT ANGLE DRILL; (3) MILWAUKEE PORTABLE BANDSAWS; SPEEDVAC MDL. ED660-6794 VACUUM PUMP, approx. 3 HP motor, skid mtd.; 1 HP PEDESTAL GRINDER w/cast iron stand; SNAP-ON HAND OPERATED HYDRAULIC H-FRAME ARBOR PRESS.

VIEW OF TOOLROOM EQUIPMENT

VIEW OF MISC. FABRICATING EQUIPMENT

CONDENSER LACING TABLES

BROWN & SHARPE CANTILEVER MEASURING MACHINE DOALL VERTICAL BANDSAW

AUCTION At the Premises of

NORDYNE, INC.2501 Boonslick Drive

BOONVILLE, MISSOURI 65233

(See Directions on Back Page)

AUCTION: THURSDAY NOVEMBER 510:00 A.M.

INSPECTION: Wednesday November 4, 9:00 A.M. to

4:00 P.M. & Morning of Sale

BUYER’S PREMIUM: 15% ONSITE • 18% WEBCAST

PROXY BIDSIf you cannot attend this sale we will bid on your behalf.

Contact Houston office at (713) 691-4401 for instructions, or go to our website at www.pmi-auction.com.

DON’T MISS THIS SALE!

SAWSELLIS MDL. 1800 MITERING BANDSAW, 1" blade, 9" rd. @ 45 deg., 11" rd. @ 90 deg., 11" x 14" flat @ 90 deg., S/N 18936869.

POWERMATIC MDL. 87 VERTICAL BAND-SAW, blade welder, tilt tbl., S/N 67-8060.

DOALL MDL. C-4 METAL CUTTING BAND-SAW, 1" blade, 10" rd. cap., on roller base, S/N 234-793697.

SEARS CONTRACTOR SERIES RADIAL ARM SAW, 10" belt driven, rip fence, roller base.

DOALL MDL. 2013-2 VERTICAL BANDSAW, tilting tbl., blade welder and grinder, variable blade spd., S/N 363-79151.

6 76 7VIEW OF VAN TRAILERS VIEW OF DUMP HOPPERS

ASSORTED DIE LIFTS

FREE STANDING BRIDGE CRANE SYSTEMSHANAHAN 7-1/2 T. X APPROX. 32' SPAN, approx. 12' ht. under hook, approx. 34' bridge travel, unitized construction, free standing runway, top running bridge, sngl. girder, P&H wire rope elec. hoist, pendant control, 6-way pwr. motion.

MISC. MATERIAL HANDLING EQUIPMENTHILLMAN ROLLER SKATE SET, w/handles and case; ASSORTED MACHINERY ROLLERS in various capacities; (3) LAWN SPREADERS; HONDA MDL. BLACK MAX PRESSURE WASHER, gasoline pwrd., 2,700 PSI, 2.3 GPM; WIDE ASSORTMENT OF IDLER ROLLER CONVEYOR up to 36"W.; ASSORTED BALL ROLLER TABLES; CHICAGO PNEUMATIC 500-LB. CAP. AIR OPERATED HOIST; (3) 2-DOOR FLAMMABLE STORAGE CABINETS; CORRUGATED STEEL HOPPERS; LARGE QTY. OF STEEL DUMP HOPPERS, forklift entry, caster base, from 1/2 cu. yd. to 1-1/2 cu. yd. cap., PLASTIC DUMPING HOPPERS, 1/2 cu. yd. and 1 yd. cap.; ASSORTMENT OF EXTENSION AND STEP LADDERS; WIDE ASSORTMENT OF GRAVITY FLOW RACK on casters; 2-WHEEL DOLLIES, BARREL DOLLIES; ACY. TORCH BOTTLE DOLLIES; HYDRAULIC PALLET JACKS; 1,000-LB. VERTICAL DRUM LIFTER; MORSE FORKLIFT DRUM LIFTER; (2) CALDWELL EXTENDABLE FORKLIFT BEAMS; TANDEM LOCK FORKLIFT LOCK; 3,000-LB. CAP. FORKLIFT MOUNTED SPREADER BAR; (35) MAGLINER 48" PALLET DOLLIES; AVERY WEIGHTRONIX 10,000-LB. CAP. MDL. DSL6048-10 PLATFORM SCALE, 60" x 48" plat-form, counting scale, D.R.O. box, digital counting unit, S/N 52070; WEIGHTRONIX 10,000-LB. CAP. MDL. E518460-10 DIGITAL SCALE, 60" x 84" platform, counting scale, S/N 14135; METTLER TOLEDO AP-PROX. 5,000-LB. CAP. DIGITAL SCALE, counting scale, D.R.O.; WIDE ASSORTMENT OF ROLLING LAD-DERS, some w/die lift accessory.

ELECTRIC FORKLIFTS(2) NISSAN MDL. CYB02L25S, 4,000-lbs. @ 24" L.C., 3-stage mast, 207" max. lift, 48" forks, large dia. cushion tires, 36 v. w/charger, S/N CYB02-002852, S/N CYBO2-003244.

PICKUP TRUCK1999 FORD MDL. F-250, Triton V8 gasoline engine, bead liner, ODO: N.A., MO License Plate 2HB394, VIN 1FTPF-27W3XKB55305.

MINI VANS2001 CHRYSLER TOWN & COUNTRY, ODO: 143,000 miles, MO License Plate AB5KOF, VIN 2C4GP44371R331297.2003 DODGE CARAVAN, ODO: 137,000 miles, MO License Plate AB5K2F, VIN 1D8GP25RX3B331661.

VAN TRAILERS(2) FRUEHAUF 40'L. MDL. FE8-F2-40, S/N MAM-267158, S/N MAM-267160.(2) TRAILMOBILE 45'L., (no title).

VIEW OF FORD PICKUP TRUCK AND MINI VANS

AUCTION

7-1/2 T. BRIDGE CRANE SYSTEM

At the Premises of

NORDYNE, INC.2501 Boonslick Drive

BOONVILLE, MISSOURI 65233

(See Directions on Back Page)

AUCTION: THURSDAY, NOVEMBER 5 •10:00 A.M.

INSPECTION: Wednesday, November 4, 9:00 A.M. to 4:00 P.M. & Morning of Sale

<(1 OF 2) NISSAN ELECTRIC FORKLIFTS

6 76 7

MEZZANINE AND OVERHEAD CONVEYOR SYSTEM

CLARK AMERICAN LPG SWEEPER

VIEW OF ROLLING LADDERS MATERIAL HANDLING EQUIPMENT ASSORTED M.R.O. ITEMS

SELF-PROPELLED SCISSOR LIFTS(2) MARKLIF MDL. CH20NEP CH SERIES, 800-lb. cap., 20' max. platform ht., S/N 23463, S/N N.A.TAREX MDL. TS30, 700-lb. cap., 30' max. platform ht., S/N 993600246.

MISCELLANEOUS SHOP & WAREHOUSE EQUIPMENT

LARGE QTY. OF ASSORTED ELECTRICAL ITEMS; ELECTRIC PLUMBERS SNAKE on roller cart; JACK STANDS; GREASE GUNS; POWER DISTRIBUTION STAND; MAKITA 10" ABRASIVE CUT-OFF SAW; BOLT CUTTERS; BANDING EQUIPMENT; SHEARS; SNIPS; SCREW DRIVERS; FISH TAPE; SMALL JACKS; WIRE CUTTERS; GEAR PULLERS; SIOUX MDL. 130-C STEAM CLEANER, elec. fired, LP gas fuel, cleaning wand and hose; HEAVY FABRICATED WORK-BENCHES; FABRICATED STEEL STANDS; PEDESTAL FANS.

LIFT TABLES & CARTS(2) G.S. CORP. MDL. BS50 ROLLER LIFT TABLES, 1,100-lb. cap., quick lock casters; WIDE SELECTION OF LIFT TABLES AND CARTS; VESTIL 300-LB. CAP. DIE CART; WESCO MFG. 1,000-LB. CAP. DIE CART; GENIE MDL. GL12 LIFT, new 2005 and 2003, battery pwrd., caster base; HYDRAULIC 1,000-LB. CAP. SCISSOR LIFT, 48" x 60" bed; PRESTO 5,000-LB. CAP. MDL. XL36-50 SCISSOR LIFT, 48" x 60" deck; ECOA 2,000 LB. CAP. SCISSOR TABLE w/60" x 60" platform; (16) AUTOQUIP 2,500-LB. CAP. HYDRAULIC SCIS-SOR LIFTS w/foot pedal controls, most w/idler roller or ball roller conveyor tops.

SWEEPERCLARKE AMERICAN LINCOLN MDL. 505-208, LP pwrd., S/N 750267.

PREFABRICATED SHOP OFFICE FACILITYMODERN, (5) offices, wood panel effect, assorted accessories.

CARBON STEEL STORAGE TANKCUSTOM, 5,000 gal. cap.

AIR RECEIVERSILVAN INDUSTRIES, new 1996, 150 PSI max. working pressure @ 450 deg., approx. 1,000 gal. cap.

M.R.O. ITEMSHUGE QTY. OF MAINTENANCE OPERATIONS MATERIALS incl. fuses, receptacle, plugs, condulets, receptacle covers, contactors, relays, switches, air filters, bearings, sprockets, gears, air valves, black iron pipe nipples, copper pipe nipples, pneu. fittings, hyd. fittings, HUGE ASSORTMENT of fasteners of all descriptions, dozens of reels of electric wire of varying specifications, pumps, reed valves, belts, hose.

>PORTABLE

SHOP OFFICE

On-Site Bidding in Boonville, Missouri or Bid Via Webcast at

BUYER’S PREMIUM: 15% ONSITE • 18% WEBCAST

PROXY BIDS: If you cannot attend this sale we will bid on your behalf. Contact Houston office at (713) 691-4401

for instructions, or go to our website at www.pmi-auction.com.

QS-0028925

P.O. Box 19100Houston, TX 77224-9100

DATED MATERIAL – PLEASE DELIVER

CONDENSER COIL & WRAPPER

MANUFACTURING FACILITY

Featuring: (2) Oak Fin Presses, (5) Burr Oak Hairpin Benders, (2) Oak Vert.

Expanders, (2) Condenser Coil Brazing Ovens, (2) Detroit Tool Condenser

Wrapper Press Systems, Wide Array of Plant Support Equip., Material Handling

Equip., M.R.O. Items, & Much, Much More!

BOONVILLE, MISSOURI

AUCTION

PUBLIC INVITEDAUCTION: THURSDAY, NOV. 5 • 10:00 A.M.

PresortedFirst Class Mail

U.S. PostagePAID

Eugene, OregonPermit No. 17

ATTENTION: PLANT MANAGEROR EQUIPMENT BUYER

ASSOCIATION OFMACHINERY AND

EQUIPMENT APPRAISERS

A 15% Buyer’s Premium Will Apply On-site. An 18% Buyer’s Premium Will Apply to Webcast Bids. See Above Rules for Participation.

Everything will be sold to the highest bidder or bidders for cash in accordance with the auctioneer’s Customary Terms of Sale, copies of which will be posted on the premises.ALL PAYMENTS MUST BE MADE BY CASH, CASHIER’S CHECK, WIRE TRANSFER OR COMPANY CHECK WITH BANK LETTER GUARANTEEING PAYMENT TO PLANT & MACHINERY INC.Here is an example of what your letter should be: Mr. “Customer Name” is a customer of this bank. This bank will guarantee unqualified payment to PMI on the account listed herein up to the amount of $___________. This letter is good until December 4, 2015.In default of payment of bills in full within the time therein specified, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. All items must be removed by the time announced at the start of the sale.Lots not paid for and/or removed within the time allowed may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charge of resale, will be charged to the defaulting purchaser.The buyer acknowledges that he or an agent has inspected all of the assets upon which he will be bidding and/or does purchase.

Buyer agrees to accept assets purchased “AS IS,” WITH “ALL FAULTS” AND “WITH REMOVAL AT BUYER’S RISK AND EXPENSE.” THE AUCTIONEER EXPRESSLY DISCLAIMS ON THE PART

OF THE AUCTIONEER AS AGENT AND THE SELLER, ANY WARRANTY AS TO FITNESS OR USABILITY OF ALL THE ASSETS, AND THE BUYER EXPRESSLY WAIVES ANY CLAIM IN RESPECT TO ANY POSSIBLE FUTURE USE OF ANY ASSET PURCHASED FOR ANY PURPOSE WHATSOEVER.The buyer does hereby assume and does agree to indemnify and hold the auctioneer harmless from any future claim which shall pertain to the fitness or use of that asset as being purchased. Riggers, movers, electricians and buyers performing work at the Auction Site must provide PMI with evidence of insurance. The insurance coverage must be at a level acceptable to PMI and to the seller. PMI reserves the right to withdraw items, alter the order of the sale, accept bids from the seller, and group lots as it may deem appropriate. This auction may include consignment items.Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the infor-mation herein contained, or contained in our catalog. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the auction. Although it is not likely, auction sales are subject to cancellation or postponement. Kindly contact auctioneer prior to attendance.These terms and conditions may be modified or supplemented by language in the catalog avail-able at the sale site or by announcement at the start of the sale. Bidders should be attentive to those announcements and to the catalog language.

PARTIAL TERMS & CONDITIONS

UNABLE TO ATTEND?Bid on-line in real time atTO PARTICIPATE YOU MUST:1. Register at www.BidSpotter.com. Use the link to

BidSpotter on PMI’s website calendar. DO IT NOW.2. Either send wire transfer, or, overnight delivery service a

cashier’s check deposit in the amount of $3,000 (U.S. Bidders) or $10,000 (Foreign Bidders) to: Plant & Machinery Inc. 1304 Langham Creek Drive, Suite 454, Houston, TX 77084 Wire transfer instructions can be found at pmi-auction.com

You must be registered and have your deposit in the hands of Plant & Machinery, Inc. at least 24 hours prior to the start of the auction. Failure to register and/or failure to send your deposit to Plant & Machinery, Inc. may disqualify you from bidding. DON’T WAIT.If you need assistance, don’t hesitate to call (713) 691-4401.ALL WEBCAST BIDS ARE SUBJECT TO AN 18% BUYER’S PREMIUM.

DIRECTIONSFROM LAMBERT-SAINT LOUIS INTERNATIONAL AIRPORT: Exit airport using Lambert International Blvd. Merge onto I-70 W and proceed ap-prox. 133 miles. Take the MO-B Exit 103 toward Boonville/Main St./Bunceton. Turn right onto B Hwy/MO-B. Take the 3rd left onto Logans Lake Rd. and proceed approx. .7 mile. Take the 1st right onto Boonslick Dr. Proceed to auction site on the left, 2501 Boonslick Dr., Boonville, MO 65233. Watch for auction signs.

LODGINGCOMFORT INN .................................................................(660) 882-5317 2427 Mid-American Industrial Dr., Boonville, MO 65233DAYS INN .........................................................................(660) 882-8624 2401 Pioneer, Boonville, MO 65233HOLIDAY INN EXPRESS ................................................. (800) 345-8082 2419 Mid-America Industrial Dr., Boonville, MO 65233

FINANCE YOUR AUCTION

PURCHASEConserve Your Cash &

Increase Your Bidding Power

AuctionLea$e Provides M&E Financing

With Approvals from $5,000 to $999,000

(800) 438-1470

Apply Online: www.AuctionLease.com