Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
LED multiscreen
Fine pitch LED display for indoor useFA-series / FE-series
Attractive and impactful signage productionwith vivid and highly visible video display
2
Clean back without cables
Power / video signal connector
A pixel card being removed
High visibility video A common-sized LED module Easy maintenance
Ensures clear image quality even in bright environments and is easy to maintain
Easy maintenance with front access
( Rear )
Standard modelHigh grade model
FA-series FE-series
Follow basic design
Indoor 1.5 mm pitch
LED display
LED-FE015i2
LED-FAxxxi2
This series adopts a 16: 9 aspect ratio LED module that makes it easy to configure full HD resolution
and a fine pixel pitch that ensures high visibility from a short distance. This full-colour fine-pitch LED
display meets the needs of large screens in various indoor spaces.
3-in-1 SMD type with a wide viewing angle
16: 9 aspect ratio for easy configura-tion
Maintenance is possible on the front
Easy viewing even in bright conditions
LED-FExxxi2
Structural design for easy construction of full HD multi-screen
6 pixel pitches to meet your application and installation environment
Easy maintenance from front
Dual power supply and video signals ensure high reliability
Basic design
Redundant design
The LED pixel configuration is a 3-in-1 SMDtype that incorporates RGB three-colour elements in one package. It is highly visibleeven when viewed from an angle, ensuring a wide viewing angle from up, down, left, and right.
The module size consisting of 8 pixel cards(4 for LED-FA025i2) is standardised to 608x 342mm. Because it uses an aspect ratio of16: 9, a multi-screen with full HD resolution(1,920 x 1,080) can be configured bycombining the same number of modulesvertically and horizontally.
Power supply and video signal connectors areinstalled on the top and bottom of the LEDmodule, and wiring is completed with only acombination of modules. Smart installation ispossible because the wiring between modules is not visible from the outside. The pixel card can also be removed and maintained from the front, so it can be installed in places where backyards cannot be secured.
The LED-FA025i2, LED-FA031i2, and LED-FA038i2 have a screen brightness of 1,200 cd /m2 and a contrast ratio of 7,000:1*. Projects bright and sharp images even under bright lighting or indoors where light hits the panel directly.*LED-FA012i2, LED-FA015i2, and LED-FA019i2 are 800 cd / m2 and 5,000:1.
These large, powerful displays form a seamless multi-screen
configuration to provide accurate indoor visibility.
Deliver signage that attracts people's eyes.
3
Indoor LED FA-series / FE-series
Examples of Full HD multi-screen configurations by viewing distance
Typical use
6.3 m
7.8 m
9.5 m
4.8 m
3.8 m
3.0 m
Controle room
Medium meeting room
Airport
Company Entrance
Showroom
1.7
m
Viewing distance (Rough guide)**Distance that pixel is hard to recognize
LED-FA031i2275”
LED-FA038i2330”
110” LED-FA012i2
137” LED-FA015i2
165” LED-FA019i2
220” LED-FA025i2
7.3 m
4.1
m144 (12x12)
6.0 m
3.4
m100 (10x10)
4.9 m
2.7
m64 (8x8)
3.6m
2.1
m36 (6x6)
3.0 m
1.7
m25 (5x5)
2.4 m
1.4
m16 (4x4)Each module size is common
34
2 m
m
608 mm
Kit product
Basic system configuration exampleLED control PC
Video signal
LED module (4x4)
LED controller RJ-45 cableSize adjusterSignal source
Kit products are available to support multi-screen installations.The LED display kit includes the equipment, installation frames, cables, etc. necessary for installation.
Kit product name
LED-FA012i2-110
LED-FA019i2-110
LED-FA015i2-137
LED-FA019i2-165
LED-FA012i2-220
LED-FA025i2-220
LED-FA038i2-220
Kit contentsResolutionDisplay size
110" (4x4)
137" (5x5)
165" (6x6)
220" (8x8)
Kit products
• LED display (multi-configuration) set
• LED controller (with wiring cable)
• Mounting frame set (decorative panel, cabinet hanger pin)
• Lower front cover
• Power bar (with power wiring and left and right side panels)
• Makeup panel set (top, side, connecting block)
• Complete back frame
• Various fixing screws
FHD ( 1920 x 1080 )
HD ( 1280 x 720 )
HD ( 1280 x720 )
FHD ( 1920 x 1080 )
4K ( 3840 x 2160 )
FHD ( 1920 x 1080 )
FHD ( 1920 x 1080 )
Kit product
Kit product
Kit product
1.2 mm pitch
1.5 mm pitch
1.9 mm pitch
2.5 mm pitch
3.1 mm pitch
3.8 mm pitch
Use an RJ-45 (CAT.6 or higher) cable. The distance between LED controller and LED module is up to 100 m. If the length exceeds 100 m, an optical cable is required.
NEC is a registered trademark of NEC Corporation.
All other trademarks are the property of their respective owners. The images in this brochure are samples.All specifications are subject to change without notice. October 2019
Cat. No. WLED-1910-0011NNEC Display Solutions, Ltd.
https://www.nec-display.com/ap/
Indoor LED FA-series / FE-series
LED-FE012i2
1.2 mm
LED-FE015i2
1.5 mm
LED-FE019i2
1.9 mm
LED-FE025i2
2.5 mm
IP20 / IP20
700 cd/m2
4,000:1
1,000 cd/m2
5,000:1
LED-FE031i2
3.1 mm
LED-FE038i2
3.8 mm
Model
49
Pixel card x 8(LED-FA025i2, LED-FE025i2 x 4)
608
34
2
18.5
520 4-M8×25
29
42
4
[Left side] [Front] [Right side] [Rear]
LED-FA012i2
1.2 mm
LED-FA015i2
480 × 270 pixel
1.5 mm
LED-FA019i2
384 × 216 pixel
1.9 mm
320 × 180 pixel
LED-FA025i2
2.5 mm
3 in-1 SMD
240 × 135 pixel
16 bit
100 to 240 V AC, 50/60 Hz
-20 to 40°C / 10 to 80% (with no condensation)
IP20 / IP20
Front
800 cd/m2
8.8 kg / 608 (W) x 342 (H) x 49 (D) mm
5,000:1
125 W
1,200 cd/m2
7,000:1
80° / 80°
LED-FA031i2
3.1 mm
LED-FA038i2
192 × 108 pixel
3.8 mmPixel pitch
160 × 90 pixelResolution
Pixel configuration
Brightness (max.)
Contrast
Colour reproduction
Operating temperature / humidity
Input power
Powerconsumption
Weight / dimensions
IP standards
Maintenance
Left / right
Upper / lower
Front / rear
Model
*Brightness half angle
Dimensions (mm)
Main specifications
Pixel pitch
Resolution
Pixel configuration
Brightness (max.)
Contrast
Colour reproduction
Operating temperature / humidity
Input power
Viewing angle*
Weight / dimensions
IP standards
Maintenance
Left / right
Upper / lower
Front / rear
Front
16 bit
FA-series
FE-series
FAFA-series
FE-series
70° / 70°
85° / 85°
85° / 85°
100 to 240 V AC, 50/60 Hz
-20 to 40°C / 10 to 80% (with no condensation)
8.8 kg / 608 (W) x 342 (H) x 49 (D) mm
80° / 80°
70° / 70°
80° / 80°
80° / 80°
480 × 270 pixel 384 × 216 pixel 320 × 180 pixel 240 × 135 pixel 192 × 108 pixel 160 × 90 pixel
Viewing angle*
3 in-1 SMD
120 WAll white
Max. brightness
125 WPowerconsumption 120 W
All white
Max. brightness
FA- series FE-series
Installation
Wide viewing angle pixelconfiguration 3-in-1 SMD
Reliability
Series
LED module with anaspect ratio of 16: 9
No wiring on the back
Module docking connector(power supply / video signal)
LED display kit model
Redundant power supplyand video signal
Yes
Yes Yes
YesYes
Yes
Yes
Yes
Yes
Limited*
-
-
FA-series
The FA series ensures redundancy by duplicating video and power connections. If a particular LED module fails, other LED modules can continue to display multi-screen images without being a�ected.
Pursuing high reliability
Comparison by series
*Supply by connector connection is only power.Video signals are connected via LAN cables from the upper and lower halls of the cabinet.