Embed Size (px)
Citation preview
PIKEPASS STICKERINSTALLATIONINSTRUCTIONS
ATTENTION!PIKEPASS STICKERS CANNOT BEUSED ON MOTORCYCLES!
Special Vehicles
Sticker InstallationInstruction Video
•
•
Visit www.pikepass.com for detailed information on:
Read BeforeInstalling
PIKEPASS Customer Service Center4401 W Memorial Rd, Ste 130
Oklahoma City, OK 73134-1722Phone: 1.800.745.3727
Fax: 405.751.5248E-mail: [email protected]
CONTACT US
For your nearest PIKEPASS location, go to www.pikepass.com or call 1-800-745-3727
Existing PIKEPASS Sticker
If there is an existing PIKEPASS Sticker on the windshield, you may reuse it by calling 1-800-745-3727 to activate it. If you do not wish to reuse the PIKEPASS Sticker, simply remove it. You can remove the PIKEPASS Sticker by starting at the cut corner and peeling it away from the windshield. After removal, clean any adhesive residue using an alcohol based glass cleaner.
Once removed, the PIKEPASS Sticker cannot be reused.
Use Th
is RulerU
se This Ruler
REMOVE ALL AIR BUBBLES FROMUNDER STICKER, OR IT MAY NOT WORK.
Choose the mounting location that applies to your vehicle from the illustrations below. Clean and dry the area before installing. Install when temperature is above 50˚F (10˚C). In colder climates, warm windshield with heater or defroster.
The PIKEPASS Sticker CAN be mounted near, but not touching, other out-of-state toll tags.
You MUST correctly and permanently install the PIKEPASS Sticker on the windshield before traveling on Oklahoma turnpikes.
DO NOT attach the Sticker to your sun visor or any temporary location.
Once removed, the Sticker CANNOT be reused.
If your windshield is metalized, visit our website or contact us for more detailed information on Special Vehicles.
1.
2.
3.
4.
1
4
3
2
1READ THIS FIRST!
Mirror Mounted on Header
Mirror Mounted on Windshield
Large Truck, No Rearview Mirror
