Atex MesH 300/800 ®

• TRL (white)

• Colour range

• solar protection

• Acoustic control

• Fire resistant

• Temperature range -50˚C / +200˚C

• Long life span 25 years +

• Breathable

• Flexible & crease resistant

• Non toxic & PVC free

• Recyclable and sustainable

Think Green

Think Atex www.atex-membranes.com

Valmiera glass UK LtdSherborne, Dorset, DT9 3RB, EnglandTel: +44 1935 813 722 Fax: +44 1935 811 822 email: atex@valmiera-glass.comwww.atex-membranes.com

Regional Atex sales offices in: germany, italy, india, Australia, France, Brazil

APPLiCATioNs

Atex mESh 300/800 - mesh fabrics are available in a range of densities and % openareas. These breathable textiles can be used for solar cladding, allowing different levelsof visability, or can be adopted for interior screening and acoustic control.

BAse FABRiC MesH 300 MesH 800

Yarn Glass-fibre 100% Glass-fibre 100%

Weight 295 (g/m2) 610 (g/m2) DIN EN 5384

Weave style mock Leno mock Leno

CoATed FABRiC WITh ANTI-WIck TREATmENT

coating clear Silicone Elastomer 100% clear Silicone Elastomer 100%

Tensile strength Warp Available on request 7000 (N/5cm) 140 (kN/m) ISO 1421Weft 6000 (N/5cm) 120 (kN/m) ISO 1421

Trapezoidal tear Warp Available on request 600 NWeft 600 N

crease resistance Available on request Available on request ASTm D4851

Total weight 325 (g/m2) 800 (g/m2) DIN EN 5384

Thickness 0.6 mm 1.15 mm

Standard Widths 2000/2800 mm 2000/2800 mm

Bi-Axial mechanical properties Available on request Available on request

Acoustic attenuation Available on request Available on request

oPTiCAL VALUes Solar Standard D65 Solar Standard D65

Transmission 48.0% 48.0% 31.0% 32.0% DIN EN 410Reflection 45.0% 48.0% 58.0% 63.0% DIN EN 410Absorption 7.0% 4.0% 11.0% 5.0% DIN EN 410Open Surface Area 19.0% 10.0%

FABRiCATioN

Sewing with PTFE thread with PTFE threadWelding* with silicone adhesive tapes with silicone adhesive tapes

CHARACTeRisTiCs

Temperature Range -50° to + 200°c -50° to + 200°c

capillary Rise <5 (mm/24h) <5 (mm/24h) DIN 53 925

FiRe RATiNg

Uk class 0 BS 476:Part 6:1989,Part 7:1997DE B1 DIN 4102

* depending on equipment, must be in accordance with specified adhesive tape grade and coordinated parameters. (P-D Interglas may change these specifications from time to time subject to a programme of continous improvement.)This data sheet is for guidance only.

Atex Mesh 300/800®