10
TUGS & WORKBOATS 1 ATD TUG 2909 December 2010

ATD TUG 2909 - Damen Group...ATD TUG 2909 Main dimensions: Length over all 29.14 m Breadth over all 9.98 m Depth at side 4.00 m Draught 4.95 m Displacement 475 ton Total Power 3000

  • Upload
    others

  • View
    26

  • Download
    3

Embed Size (px)

Citation preview

  • TUGS & WORKBOATS

    1

    ATD TUG 2909

    December 2010

  • TUGS & WORKBOATS

    2

    ATD TUG 2909

    Main dimensions:

    Length over all 29.14 m

    Breadth over all 9.98 m

    Depth at side 4.00 m

    Draught 4.95 m

    Displacement 475 ton

    Total Power 3000 kW

    Bollard pull ahead 43.0 ton

    Speed ahead 11.2 knots

    TECHNICAL SPECIFICATIONS - CHARACTERISTICS

  • TUGS & WORKBOATS

    3

    ATD TUG 2909

    Capacities:

    Fuel oil 40.9 m³ Dirty oil 1.5 m³

    Fresh water 60.8 m³ Lubrication oil 1.5 m³

    Sewage 2.7 m³ Hydraulic oil 1.5 m³

    Bilge water 1.5 m³ Ballast water 23.3 m³

    Foam (optional) 10.5 m³ Dispersant (optional) 3.0 m³

    TECHNICAL SPECIFICATIONS – TANK CONFIGURATION

  • TUGS & WORKBOATS

    4

    ATD TUG 2909

    Caterpillar 3512C HD TA/C main engines:- 12 cylinder V-type engine - Electronically controlled fuel injectors - Emissions according EPA and IMO Tier 2- Maximum power 1500 kW at 1600 Rpm- Resiliently mounted

    Rolls Royce US 205 FP/P18 rudder propellers:- Straight shaft line with bow teeth coupling- Built in on/off clutch- CuNiAl five bladed 2200 mm fixed pitch propeller- TK nozzle with stainless steel inner plate

    TECHNICAL SPECIFICATIONS – PROPULSION SYSTEM

  • TUGS & WORKBOATS

    5

    ATD TUG 2909

    Standard equipment:- Standard bilge/fire fighting module- Closed cooling water systems with box coolers- Forced engine room ventilation - 35 dB(A) Exhaust dampers- 2 Generator sets 86 kVA each

    Optional equipment:- Bilge water separator- Fuel oil purifier- Sewage treatment plant- Air intake filters engine room ventilation- Dispersant system- External FiFi (600m³/hr or 1200m³/hr)- Internal FiFi engine room (Novec)

    TECHNICAL SPECIFICATIONS – ENGINE ROOM LAYOUT

  • TUGS & WORKBOATS

    6

    ATD TUG 2909

    Fore deck:- Fairlead integrated in the bullwark- Hydraulic anchor winch/rope reel

    (for side by side operations)

    Aft deck:- Heavy duty rubber fendering - Flush engine room hatch- Store hatch- Double pole towing bitt- Heavy duty double drum towing winch

    Pull : 10 ton at 30 m/minBrake : 100 ton

    Optional equipment:- Foldable navigation mast- Towing hook- Deck crane

    TECHNICAL SPECIFICATIONS – MAIN DECK LAYOUT

  • TUGS & WORKBOATS

    7

    ATD TUG 2909

    Ergonomics:- Modern/functional layout- Excellent all round view- Ergonomic wheelhouse consoles- Chart table with drawers

    Comfort:- Helmsman’s seat at center line- Ventilation, air-conditioning and heating- Noise level in the wheelhouse

  • TUGS & WORKBOATS

    8

    ATD TUG 2909

    Standard outfitting: Optional equipment:- Accommodation for 6 persons - Additional heating in cabins- Galley with modern equipment - Washing machine- Mess room - Tumble dryer- Two sanitary spaces- Dry store with wooden shelving

    Comfort:- Modern linings- Floating floor- Complete insulated- Air-conditioning - Heating

    TECHNICAL SPECIFICATIONS – ACCOMMODATION LAYOUT

  • TUGS & WORKBOATS

    9

    ATD TUG 2909

    REFERENCES

    Recently delivered:YN 545301, U.K.YN 545302, U.K.YN 545303, U.K.YN 545304, U.K.

  • TUGS & WORKBOATS

    10

    CONTACT PARTICULARS

    DAMEN SHIPYARDS GORINCHEMP.O.Box 14200 AA GORINCHEMThe Netherlands

    Phone +31 (0) 183 63 99 11Fax +31 (0) 183 63 21 89E-mail [email protected] www.damen.nl

    STANDARD OF EXCELLENCE

    mailto:[email protected]