3
INNOVATIVE TECHNOLOGY FROM ITW LINX! CAT 6 NETWORK PROTECTOR SOLID STATE, BUILDING ENTRANCE PROTECTION 9026-470-00 Rev 3 ©2005 ITW Linx The CAT6-LAN Category 6 primary surge protector is the only choice for protecting sensitive network routers, WAPs, PBX/KSUs, and workstations from lightning and transient voltage surges. The 4 pair version uses the patented Linx Cat 6 Circuit Technology to ensure total protection. For use with high performance 4 pair Cat 6 Outside Plant Cables as well as Cat 6 UTP cables. 100% solid-state protection for fast reliable response to surge events, UL listed per UL497 for building entrance protection, and meets TIA568 for Cat 6 performance. Cat 6 performance verified by independent laboratories. Features: UL Listed for Primary (497) and Isolated Loop (497B) applications. UL listing is critical for ensuring safety and performance of protection devices. Meets and exceeds TIA/EIA Standards 568-B.2-1 and 758 for Category 6 performance. The TIA 758 standard requires use of a building entrance protector on Cat 6 campus / outside plant applications. Solid-state protection provides the fastest response to transient voltages (2–5 nanoseconds) by quickly diverting damaging surges to ground. Protects 4 pair LAN applications with 16 V clamping voltage or 4 pair voice applications with 75 V or 235 V clamping voltage. Use between buildings in a campus environment as a building entrance protector or in hostile industrial applications as an isolated loop protector. Lifetime Product Warranty—This surge protector shall be free of any defects in design, materials or workmanship or ITW Linx will repair or replace the defective product. $50,000 Connected Equipment Warranty—This ITW Linx product will protect your equipment or we will repair or replace it up to $50,000! PRODUCT SPECIFICATIONS Ordering Information for LAN Applications ITW Linx Part Number Description Input / Output Connection Clamping Voltage CAT6-LAN Category 6 Primary Protector— 110 In / 110 Out per TIA 568A or 568B 16 VDC 4 Pair, UL Listed Per 497, 497B CAT6-POE Category 6 Primary Protector— 110 In / 110 Out per TIA 568A or 568B 16 V Data (ORANGE/GREEN) 4 Pair, UL Listed Per 497, 497B 62V Power (BLUE/BROWN) Ordering Information for Voice/ISDN Applications ITW Linx Part Number Description Input / Output Connection Clamping Voltage CAT6-75 Category 6 Primary Protector— 110 In / 110 Out per TIA 568A or 568B 75 VDC 4 Pair, UL Listed Per 497, 497B CAT6-235 Category 6 Primary Protector— 110 In / 110 Out per TIA 568A or 568B 235 VDC 4 Pair, UL Listed Per 497, 497B itwlinx.com 1-800-336-LINX Cat 6 Circuit Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes 100% Solid State. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes Response Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–5 nanoseconds UL Listings: . . . . . . . . . . . . . . . . . . . . . . . . . . . 497 Primary (Building Entrance), . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 497B Isolated Loop Cat 6 Standards: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Exceeds TIA/EIA 568.2-1, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TIA/EIA 758 (Outside Plant Cabling) Overall Dimensions . . . . . . . . . . . . . . . . . . . . . . . . 4.25" L × 4.25" W × 1.42"D Clamping Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 75 or 235 Volts DC Grounding Requirement . . . . . . . . . . . . . . . . . . . Field installed solid copper wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #10 AWG for Primary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #14 AWG for Isolated Loop Cable Shield Grounding . . . . . . Integral Shield Grounding Clip attaches to cable Ground Impedance . . . . . . . . . . . . . . < 0.5 ohm from protector to earth ground Input/Output Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 Punchdown Designs and specifications subject to change without notice due to product improvement ITW LINX PART NO.: CAT6-LAN

AT 6 NETWORK PROTECTOR STATE , BUILDING ENTRANCE P · lightning and transient voltage surges. ... Cat 6 Circuit Technology™ to ensure total protection. ... Ordering Information

  • Upload
    vudan

  • View
    215

  • Download
    0

Embed Size (px)

Citation preview

INNOVATIVE TECHNOLOGY FROM ITW LINX!

CAT 6 NETWORK PROTECTORSOLID STATE, BUILDING ENTRANCE PROTECTION

9026

-470

-00

Rev 3

©20

05 IT

W Li

nx

The CAT6-LAN Category 6 primary surge protector is the only choice forprotecting sensitive network routers, WAPs, PBX/KSUs, and workstations fromlightning and transient voltage surges. The 4 pair version uses the patented LinxCat 6 Circuit Technology™ to ensure total protection. For use with highperformance 4 pair Cat 6 Outside Plant Cables as well as Cat 6 UTP cables.100% solid-state protection for fast reliable response to surge events, UL listedper UL497 for building entrance protection, and meets TIA568 for Cat 6performance. Cat 6 performance verified by independent laboratories.

Features:• UL Listed for Primary (497) and Isolated Loop (497B) applications. UL

listing is critical for ensuring safety and performance of protection devices.• Meets and exceeds TIA/EIA Standards 568-B.2-1 and 758 for Category 6

performance. The TIA 758 standard requires use of a building entranceprotector on Cat 6 campus / outside plant applications.

• Solid-state protection provides the fastest response to transient voltages (2–5 nanoseconds) by quickly diverting damaging surges to ground.

• Protects 4 pair LAN applications with 16 V clamping voltage or 4 pair voice applications with 75 V or 235 V clamping voltage.

• Use between buildings in a campus environment as a building entrance protector or in hostile industrial applications as an isolated loop protector.

• Lifetime Product Warranty—This surge protector shall be free of any defects indesign, materials or workmanship or ITW Linx will repair or replace the defectiveproduct.

• $50,000 Connected Equipment Warranty—This ITW Linx product will protectyour equipment or we will repair or replace it up to $50,000!

PRODUCT SPECIFICATIONS

Ordering Information for LAN ApplicationsITW Linx Part Number Description Input / Output Connection Clamping Voltage

CAT6-LAN Category 6 Primary Protector— 110 In / 110 Out per TIA 568A or 568B 16 VDC4 Pair, UL Listed Per 497, 497B

CAT6-POE Category 6 Primary Protector— 110 In / 110 Out per TIA 568A or 568B 16 V Data (ORANGE/GREEN)

4 Pair, UL Listed Per 497, 497B 62V Power (BLUE/BROWN)

Ordering Information for Voice/ISDN ApplicationsITW Linx Part Number Description Input / Output Connection Clamping Voltage

CAT6-75 Category 6 Primary Protector— 110 In / 110 Out per TIA 568A or 568B 75 VDC4 Pair, UL Listed Per 497, 497B

CAT6-235 Category 6 Primary Protector— 110 In / 110 Out per TIA 568A or 568B 235 VDC4 Pair, UL Listed Per 497, 497B

itwlinx.com 1-800-336-LINX

Cat 6 Circuit Technology™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes100% Solid State. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . YesResponse Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–5 nanosecondsUL Listings:. . . . . . . . . . . . . . . . . . . . . . . . . . . 497 Primary (Building Entrance),. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 497B Isolated Loop

Cat 6 Standards: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Exceeds TIA/EIA 568.2-1,. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TIA/EIA 758 (Outside Plant Cabling)

Overall Dimensions . . . . . . . . . . . . . . . . . . . . . . . . 4.25" L × 4.25" W × 1.42"DClamping Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 75 or 235 Volts DCGrounding Requirement. . . . . . . . . . . . . . . . . . . Field installed solid copper wire. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #10 AWG for Primary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #14 AWG for Isolated LoopCable Shield Grounding . . . . . . Integral Shield Grounding Clip attaches to cableGround Impedance . . . . . . . . . . . . . . < 0.5 ohm from protector to earth groundInput/Output Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 Punchdown

Designs and specifications subject to change without notice due to product improvement

ITW LINX PART NO.: CAT6-LAN

6

itwlinx.com 1-800-336-LINX

CAT 6 NETWORK PROTECTORSOLID STATE, BUILDING ENTRANCE PROTECTION

9026

-470

-00

Rev 3

©20

05 IT

W Li

nx

Performance per TIA/EIA 568-B.2-1 Standard and Telco Specifications

Multiple Building Installation—TIA/EIA 568-B & 758

Single Building Installation—TIA/EIA 568-B & 758

DID YOU KNOW?

ITW Linx also offers Cat 6 rack- or wall-mountable Building Entrance Terminals and Five Pin Protection modules.

ITWLinxCAT6-LAN

Frequency (MHz)

Category 6 Max dB Limit

-0.60-0.50-0.40-0.30-0.20-0.100.000.100.20

1 10 100 1000Frequency (MHz)

Attn

(dB

)

CAT6-LAN Attenuation Performance

-80-70

-60-50

-40

-30-20

-10

1 10 100 1000Frequency (MHz)

Retu

rn L

oss

(dB

)

CAT6-LAN Return Loss Performance

Nex

t (dB

)

100101 1000-100-90

-80-70

-60-50

-40-30

CAT6-LAN NEXT Performance

ITW LinxCat 6

Protector

ITW LinxCat 6

ProtectorPatch Panel 295'

4-pair OutsidePlant Cable

7'

LAN

EQUI

PMEN

T

Primary Protection Building BPrimary ProtectionBuilding A Building Entrance Points

100 meters

To Single Point Equipment Ground To Single Point Equipment Ground

9'

TerminalEquipment

InformationOutlet

9' 7'

295'

4-pair UTP Cable

7'

Patch Panel

LAN

EQUI

PMEN

T

Isolated Loop Protection Category 6

100 meters

To Single Point Equipment Ground To Single Point Equipment Ground

9'

TerminalEquipment

InformationOutlet

9' 7'

ITW LinxCat 6

Protector

ITW LinxCat 6

Protector

• Category 6 per TIA 568-B.2-1• Solid State, Primary UL 497 • 12-, 25- or 50-pair BETs fits

standard 19" racks or wall-mountable

• 110 Punch-down connections• CAT6-FPPs are available in

16, 75 or 235 clamping voltages.

PART NO. DL-50C

PART NO. DL-25C

PART NO. DL-12C NOT SHOWN

PART NO. FPPCAT6-75

PART NO. FPPCAT6-16

PART NO. FPPCAT6-235

BarcodesInc | 200 West Monroe Street, Chicago, IL 60606 | T: 1-800-351-9962 | F: 1-312-212-1800 | www.barcodesinc.com

BarcodesInc 200 West Monroe Street

Chicago, Illinois 60606

Phone: 1-800-351-9962 Fax: 1-312-212-1800

www.barcodesinc.com

AND MORE

BRANDSAbout BarcodesInc

Who We Are

Why Choose BarcodesInc?

Highly-Trained Technical Support

BarcodesInc is North America's leading provider of specialized digital data hardware and software solutions. Our products include barcode scanners, mobile computing devices, identification card equipment, point-of-sale systems, barcode label and receipt printers, and consumables, all of which help customers improve productivity

We Owe Our Success To YouItôs true that data tracking is our expertise - but customer satisfaction is our true passion. We have one overriding objective: focus on you, the customer. We understand that each customerôs need is unique. Thatôs why we listencarefully and tailor our solutions to meet your needs. We appreciate the opportunity to serve you and strive toexceed your expectations!

Our technical staff has the broadest knowledge and every significant certification in the industry. One of our friendly experts is always available to suggest products and solutions for any situation.

Largest Inventory in the Industry and Same-Day ShippingWhatever your barcoding, mobile computing, or printing needs, we will fill your order and ship it the same day.

Premier Access to Top ManufacturersBarcodesInc maintains strong strategic partnerships with the leading manufacturers in barcoding, mobile computing, printing and RFID.

Responsive Customer ServiceEvery phone call and email is responded to promptly, completely and accurately by our customer service team.

Easy ReturnsDamaged, defective or incorrectly ordered goods may be returned without hassle.

Incredible ValueOur purchasing power means big savings for you. Whatever your project, our team will work hard to deliver a solution that fits your budget.

Dedicated Account ManagerOur Account Managers will not compromise when it comes to providing you top-notch service. Your Account Manager is the primary point of contact for your business and makes it a priority to get to know you, your company and all your needs.

and profitability. Our product and solution experts have been serving both small businesses and large enterprises since 1994.