63
TEST REPORT Test Report # 19H 004511(A1) Date of Report Issue: July 17, 2019 Date of Sample Received: June 18, 2019 Pages: Page 1 of 56 QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation. The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited. ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally. CS-HK-RE005-POLY Ver.14 In December 2018, ANSECO became QIMA. AT-1500 CLIENT INFORMATION: Company: Polyconcept GBS Recipient: Jenny Liu Recipient Email: [email protected] SAMPLE INFORMATION: Description: Bounty 11oz Ceramic Mug, Constellation 12oz Ceramic Mug, Zapata 15oz Ceramic Mug, Chalk It Up 11oz Ceramic Mug, Bounty Spirit 11oz Ceramic Mug, Contra 17oz Ceramic Mug, Habanera 10oz Ceramic Mug Article No.: Refer to Page 2 Purchase Order Number: Refer to Page 2 Factory No.: Toy Co./Agency: Vendor No.: 10873 Country of Origin: China Country of Distribution: United States, Canada Labeled Age Grade: Quantity Submitted: Refer to Page 2 Requested Age Grade: Testing Period: 06/19/2019 07/16/2019 Tested Age Grade: OVERALL RESULT: PASS Refer to page 3 for test result summary and appropriate notes. QIMA Testing (HK) Limited Loska Yeung Lok Ka Assistant Manager, Chemical Laboratory

AT-1500 TEST REPORT...PASS FDA21CFR 177.1210,Closureswith SealingGaskets# PASS FDA21CFR 177.1520,PolypropyleneCopolymers PASS California Proposition 65Case No.938430, Leachable Lead

  • Upload
    others

  • View
    23

  • Download
    0

Embed Size (px)

Citation preview

TEST REPORTTest Report # 19H 004511(A1) Date of Report Issue: July 17, 2019

Date of Sample Received: June 18, 2019 Pages: Page 1 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

AT-1500

CLIENT INFORMATION:Company: Polyconcept GBS

Recipient: Jenny LiuRecipient Email: [email protected]

SAMPLE INFORMATION:Description: Bounty 11oz Ceramic Mug, Constellation 12oz Ceramic Mug, Zapata 15oz

Ceramic Mug, Chalk It Up 11oz Ceramic Mug, Bounty Spirit 11oz Ceramic Mug,Contra 17oz Ceramic Mug, Habanera 10oz Ceramic Mug

Article No.: Refer to Page 2 Purchase Order Number: Refer to Page 2Factory No.: Toy Co./Agency:Vendor No.: 10873 Country of Origin: ChinaCountry of Distribution: United States, Canada Labeled Age Grade:Quantity Submitted: Refer to Page 2 Requested Age Grade:Testing Period: 06/19/2019 07/16/2019 Tested Age Grade:

OVERALL RESULT:PASS

Refer to page 3 for test result summary and appropriate notes.

QIMA Testing (HK) Limited

Loska Yeung Lok KaAssistant Manager, Chemical Laboratory

Test Report #: 19H 004511(A1) Page 2 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

ARTICLE/ PO NO./ QUANTITY SUBMITTED DETAILED:

Style description Article No. PO No. Qty.

Bounty 11oz Ceramic Mug

SM 6301BK M000011091 24 pcs

SM 6301GR M000007567 24 pcs

SM 6301NBL M000011091 24 pcs

SM 6301WH M000010299 24 pcs

Constellation 12oz Ceramic MugSM 6303BK M000006291 24 pcs

SM 6303WH M000010656 24 pcs

Zapata 15oz Ceramic Mug SM 6306NBL M000010299 24 pcs

Chalk It Up 11oz Ceramic Mug SM 6309BK M000008203 22 pcs

Bounty Spirit 11oz Ceramic MugSM 6321BK M000009233 24 pcs

SM 6321RE M000010871 24 pcs

Contra 17oz Ceramic Mug SM 6350WH M000001320 24 pcs

Habanera 10oz Ceramic Mug

SM 6352BK M000010871 24 pcs

SM 6352PBL M000008873 24 pcs

SM 6352RE M000010656 24 pcs

SM 6352WH M000010656 24 pcs

Test Report #: 19H 004511(A1) Page 3 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

TEST RESULTS SUMMARY:

At the request of the client, the following tests were conducted:

CONCLUSION TEST(S) CONDUCTED

PASS Requirement, Soluble Elements in Substrate Materials

PASS California Proposition 65, Total Lead in Substrate Materials

PASS California Proposition 65, Total Lead in Glass and Ceramic Materials#

PASS California Proposition 65, Phthalates (DBP, BBP, DEHP, DINP, DIDP, DnHP)

PASS Requirement, Bisphenol A#

PASS FDA 21 CFR 177.1210, Closures with Sealing Gaskets#

PASS FDA 21 CFR 177.1520, Polypropylene Copolymers

PASS California Proposition 65 Case No. 938430, Leachable Lead and Cadmium fromTableware (Shipment over 2,000 Pieces) Interior#

PASS FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from CeramicsInterior#

PASS California Proposition 65 Case No. CGC 04 436729, Leachable Lead and Cadmiumfrom Tableware Lip and Rim#

PASS Canadian Consumer Products Containing Lead Regulations (SOR/2018 83), Total LeadContent

PASS Canadian Glazed Ceramics and Glassware Regulations SOR/2016 175, Leachable Leadand Cadmium from Ceramics and Glassware Interior

PASS Canadian Glazed Ceramics and Glassware Regulations SOR/2016 175, Leachable Leadand Cadmium from Ceramics and Glassware Lip and Rim

Test Report #: 19H 004511(A1) Page 4 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

Requirement, Soluble Elements in Substrate Materials

Test Method: ASTM F963 17 Clause 8.3.5Analytical Method: Inductively Coupled Plasma Mass Spectrometry

Substrate Materials Other than Modeling Clay

Specimen No. 9 Soluble

Test Item Result(ppm)

Result(ppm)

Result(ppm)

Result(ppm)

Result(ppm)

Limit(ppm)

Soluble Antimony (Sb) ND 60

Soluble Arsenic (As) ND 25

Soluble Barium (Ba) ND 1000

Soluble Cadmium (Cd) ND 75

Soluble Chromium (Cr) ND 60

Soluble Lead (Pb) ND 90

Soluble Mercury (Hg) ND 60

Soluble Selenium (Se) ND 500

Conclusion PASS

Note:ppm (Parts per million) = mg/kg (Milligrams per kilogram)LT = Less thanND = Not detected (Reporting Limit = 2 ppm)

Remark:The total heavy metals screening results exceeded 80% of the soluble heavy metal limits, therefore a separatesoluble analysis was conducted.

Test Report #: 19H 004511(A1) Page 5 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

California Proposition 65, Total Lead in Substrate Materials

Test Method: CPSC CH E1001 08.3 (Metal), CPSC CH E1002 08.3 (Non Metal)Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 1 2 9 Total

Test Item Result(ppm)

Result(ppm)

Result(ppm)

Result(ppm)

Result(ppm)

Limit(ppm)

Total Lead (Pb) ND ND 78 100

Conclusion PASS PASS PASS

Note:ppm (Parts per million) = mg/kg (Milligrams per kilogram)LT = Less thanND = Not detected (Reporting Limit = 20 ppm)Composite results are based on specimen of least mass resulting in highest potential concentration.

Remark:The specification is quoted from requirement.

Test Report #: 19H 004511(A1) Page 6 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

California Proposition 65, Total Lead in Glass and Ceramic Materials

Test Method: In House Method#

Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 3 4 5 6 7 Total

Test Item Result(ppm)

Result(ppm)

Result(ppm)

Result(ppm)

Result(ppm)

Limit(ppm)

Total Lead (Pb) 24 22 22 20 24 100

Conclusion PASS PASS PASS PASS PASS

Specimen No. 8 Total

Test Item Result(ppm)

Result(ppm)

Result(ppm)

Result(ppm)

Result(ppm)

Limit(ppm)

Total Lead (Pb) 41 100

Conclusion PASS

Note:ppm (Parts per million) = mg/kg (Milligrams per kilogram)LT = Less thanND = Not detected (Reporting Limit = 20 ppm)Composite results are based on specimen of least mass resulting in highest potential concentration.

Remark:The specification is quoted from requirement.

Test Report #: 19H 004511(A1) Page 7 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

California Proposition 65, Phthalates (DBP, BBP, DEHP, DINP, DIDP, DnHP)

Test Method: CPSC CH C1001 09.4Analytical Method: Gas Chromatography with Mass Spectrometry

Specimen No. 1 2

Test Item CAS No. Result(mg/kg)

Result(mg/kg)

Result(mg/kg)

Result(mg/kg)

Limit(mg/kg)

Dibutyl phthalate(DBP) 84 74 2 ND ND 1000

Benzyl butyl phthalate(BBP) 85 68 7 ND ND 1000

Di (2 ethylhexyl)phthalate (DEHP) 117 81 7 ND ND 1000

Diisononyl phthalate(DINP)

28553 12 068515 48 0 ND ND 1000

Diisodecyl phthalate(DIDP)

26761 40 068515 49 1 ND ND 1000

Di n hexyl phthalate(DnHP) 84 75 3 ND ND 1000

Conclusion PASS PASS

Note:mg/kg (Milligrams per kilogram) = ppm (Parts per million) = 0.0001 % m/m (Percent by mass)LT = Less thanND = Not detected (Reporting Limit = 300 mg/kg)Composite results are based on specimen of least mass resulting in highest potential concentration.

Remark:The specification is quoted from requirement.

Test Report #: 19H 004511(A1) Page 8 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

Requirement, Bisphenol A

Test Method: In House Method#

Analytical Method: Liquid Chromatography with Fluorescence Detection

Specimen No. 1 2

Test Item CAS No. Result(ppm)

Result(ppm)

Result(ppm)

Result(ppm)

Limit(ppm)

Bisphenol A (BPA) 80 05 7 ND ND ND

Conclusion PASS PASS

Note:ppm (Parts per million) = mg/kg (Milligrams per kilogram)LT = Less thanND = Not Detected (Reporting Limit = 1 ppm)

Test Report #: 19H 004511(A1) Page 9 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

FDA 21 CFR 177.1210, Closures with Sealing Gaskets

Test Method: FDA 21 CFR 177.1210#

Specimen No. 25 26

Test Item Test Condition Result(ppm)

Result(ppm)

RL(ppm)

Limit(ppm)Temp. Duration

Distilled water extractive Fill boiling Until Coolto 100OF 19 18 10 50

Conclusion PASS PASS

Note:Temp. = Temperature°F = Degree Fahrenheitppm (Parts per million) = mg/kg (Milligrams per kilogram foodstuff)LT = Less thanND = Not detected. Result value is less than reporting limit (RL).

Remark:The specification is quoted from 21 CFR 177.1210 Table 2 Section 2.

Test Report #: 19H 004511(A1) Page 10 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

FDA 21 CFR 177.1520, Polypropylene Copolymers

Test Method: FDA 21 CFR 177.1520

Specimen No. 2

Test Item Temp. Duration Result Result RL Limit

Density (g/cc) NA NA 0.952 NA 0.85 1.00

n Hexane extractive (%) 50°C 2 hours 0.6 0.4 5.5

Xylene extractive (%) Reflux 2 hours or untiltotal dissolved 1.2 1.0 30

Conclusion PASS

Note:Temp. = Temperature°C = Degree Celsiusg/cc = Grams per cubic centimeter% = Percent by weightNA = Not applicableLT = Less thanND = Not detected. Result value is less than reporting limit (RL).

Remark:The specification is quoted from 21 CFR 177.1520 (c) 3.1a.

Test Report #: 19H 004511(A1) Page 11 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment over 2,000Pieces) Interior

Test Method: ASTM C738 94(Reapproved 2016)#

Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 10A 10B 10C 10D 10E 10F 10G

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Volume of acid used(mL) 350 350 350 350 350 350 350

Leachable Cadmium(Cd) ND ND ND ND ND ND ND

Leachable Lead (Pb) ND ND ND ND ND ND ND

Conclusion

Specimen No. 10H 10I 10J 10K 10L

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Average(mg/L)

Limit(mg/L)

Volume of acid used(mL) 350 350 350 350 350

Leachable Cadmium(Cd) ND ND ND ND ND ND 0.049

Leachable Lead (Pb) ND ND ND ND ND ND 0.100

Conclusion PASS

Note:mL = Millilitresmg/L (Milligrams per litre) = ppm (Parts per million)NA = Not applicableLT = Less thanND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Test Report #: 19H 004511(A1) Page 12 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

Category Leachable Cd(mg/L)

Leachable Pb(mg/L)

X Cups and Mugs (Average of 12) 0.049 0.100

Flatware (Average of 12) 0.189 0.226

Large Hollowware (Average of 12) 0.049 0.100

Small Hollowware (Average of 12) 0.049 0.100

Pitchers (Average of 12) 0.049 0.100

Test Report #: 19H 004511(A1) Page 13 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment over 2,000Pieces) Interior

Test Method: ASTM C738 94(Reapproved 2016)#

Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 11A 11B 11C 11D 11E 11F 11G

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Volume of acid used(mL) 350 350 350 350 350 350 350

Leachable Cadmium(Cd) ND ND ND ND ND ND ND

Leachable Lead (Pb) ND ND ND ND ND ND ND

Conclusion

Specimen No. 11H 11I 11J 11K 11L

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Average(mg/L)

Limit(mg/L)

Volume of acid used(mL) 350 350 350 350 350

Leachable Cadmium(Cd) ND ND ND ND ND ND 0.049

Leachable Lead (Pb) ND ND ND ND ND ND 0.100

Conclusion PASS

Note:mL = Millilitresmg/L (Milligrams per litre) = ppm (Parts per million)NA = Not applicableLT = Less thanND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Test Report #: 19H 004511(A1) Page 14 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

Category Leachable Cd(mg/L)

Leachable Pb(mg/L)

X Cups and Mugs (Average of 12) 0.049 0.100

Flatware (Average of 12) 0.189 0.226

Large Hollowware (Average of 12) 0.049 0.100

Small Hollowware (Average of 12) 0.049 0.100

Pitchers (Average of 12) 0.049 0.100

Test Report #: 19H 004511(A1) Page 15 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment over 2,000Pieces) Interior

Test Method: ASTM C738 94(Reapproved 2016)#

Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 12A 12B 12C 12D 12E 12F 12G

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Volume of acid used(mL) 350 350 350 350 350 350 350

Leachable Cadmium(Cd) ND ND ND ND ND ND ND

Leachable Lead (Pb) ND ND ND ND ND ND ND

Conclusion

Specimen No. 12H 12I 12J 12K 12L

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Average(mg/L)

Limit(mg/L)

Volume of acid used(mL) 350 350 350 350 350

Leachable Cadmium(Cd) ND ND ND ND ND ND 0.049

Leachable Lead (Pb) ND ND ND ND ND ND 0.100

Conclusion PASS

Note:mL = Millilitresmg/L (Milligrams per litre) = ppm (Parts per million)NA = Not applicableLT = Less thanND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Test Report #: 19H 004511(A1) Page 16 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

Category Leachable Cd(mg/L)

Leachable Pb(mg/L)

X Cups and Mugs (Average of 12) 0.049 0.100

Flatware (Average of 12) 0.189 0.226

Large Hollowware (Average of 12) 0.049 0.100

Small Hollowware (Average of 12) 0.049 0.100

Pitchers (Average of 12) 0.049 0.100

Test Report #: 19H 004511(A1) Page 17 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment over 2,000Pieces) Interior

Test Method: ASTM C738 94(Reapproved 2016)#

Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 13A 13B 13C 13D 13E 13F 13G

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Volume of acid used(mL) 350 350 350 350 350 350 350

Leachable Cadmium(Cd) ND ND ND ND ND ND ND

Leachable Lead (Pb) ND ND ND ND ND ND ND

Conclusion

Specimen No. 13H 13I 13J 13K 13L

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Average(mg/L)

Limit(mg/L)

Volume of acid used(mL) 350 350 350 350 350

Leachable Cadmium(Cd) ND ND ND ND ND ND 0.049

Leachable Lead (Pb) ND ND ND ND ND ND 0.100

Conclusion PASS

Note:mL = Millilitresmg/L (Milligrams per litre) = ppm (Parts per million)NA = Not applicableLT = Less thanND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Test Report #: 19H 004511(A1) Page 18 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

Category Leachable Cd(mg/L)

Leachable Pb(mg/L)

X Cups and Mugs (Average of 12) 0.049 0.100

Flatware (Average of 12) 0.189 0.226

Large Hollowware (Average of 12) 0.049 0.100

Small Hollowware (Average of 12) 0.049 0.100

Pitchers (Average of 12) 0.049 0.100

Test Report #: 19H 004511(A1) Page 19 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment over 2,000Pieces) Interior

Test Method: ASTM C738 94(Reapproved 2016)#

Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 14A 14B 14C 14D 14E 14F 14G

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Volume of acid used(mL) 340 340 340 340 340 340 340

Leachable Cadmium(Cd) ND ND ND ND ND ND ND

Leachable Lead (Pb) ND ND ND ND ND ND ND

Conclusion

Specimen No. 14H 14I 14J 14K 14L

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Average(mg/L)

Limit(mg/L)

Volume of acid used(mL) 340 340 340 340 340

Leachable Cadmium(Cd) ND ND ND ND ND ND 0.049

Leachable Lead (Pb) ND ND ND ND ND ND 0.100

Conclusion PASS

Note:mL = Millilitresmg/L (Milligrams per litre) = ppm (Parts per million)NA = Not applicableLT = Less thanND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Test Report #: 19H 004511(A1) Page 20 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

Category Leachable Cd(mg/L)

Leachable Pb(mg/L)

X Cups and Mugs (Average of 12) 0.049 0.100

Flatware (Average of 12) 0.189 0.226

Large Hollowware (Average of 12) 0.049 0.100

Small Hollowware (Average of 12) 0.049 0.100

Pitchers (Average of 12) 0.049 0.100

Test Report #: 19H 004511(A1) Page 21 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment over 2,000Pieces) Interior

Test Method: ASTM C738 94(Reapproved 2016)#

Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 15A 15B 15C 15D 15E 15F 15G

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Volume of acid used(mL) 340 340 340 340 340 340 340

Leachable Cadmium(Cd) ND ND ND ND ND ND ND

Leachable Lead (Pb) ND ND ND ND ND ND ND

Conclusion

Specimen No. 15H 15I 15J 15K 15L

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Average(mg/L)

Limit(mg/L)

Volume of acid used(mL) 340 340 340 340 340

Leachable Cadmium(Cd) ND ND ND ND ND ND 0.049

Leachable Lead (Pb) ND ND ND ND ND ND 0.100

Conclusion PASS

Note:mL = Millilitresmg/L (Milligrams per litre) = ppm (Parts per million)NA = Not applicableLT = Less thanND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Test Report #: 19H 004511(A1) Page 22 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

Category Leachable Cd(mg/L)

Leachable Pb(mg/L)

X Cups and Mugs (Average of 12) 0.049 0.100

Flatware (Average of 12) 0.189 0.226

Large Hollowware (Average of 12) 0.049 0.100

Small Hollowware (Average of 12) 0.049 0.100

Pitchers (Average of 12) 0.049 0.100

Test Report #: 19H 004511(A1) Page 23 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment over 2,000Pieces) Interior

Test Method: ASTM C738 94(Reapproved 2016)#

Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 16A 16B 16C 16D 16E 16F 16G

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Volume of acid used(mL) 410 410 410 410 410 410 410

Leachable Cadmium(Cd) ND ND ND ND ND ND ND

Leachable Lead (Pb) ND ND ND ND ND ND ND

Conclusion

Specimen No. 16H 16I 16J 16K 16L

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Average(mg/L)

Limit(mg/L)

Volume of acid used(mL) 410 410 410 410 410

Leachable Cadmium(Cd) ND ND ND ND ND ND 0.049

Leachable Lead (Pb) ND ND ND ND ND ND 0.100

Conclusion PASS

Note:mL = Millilitresmg/L (Milligrams per litre) = ppm (Parts per million)NA = Not applicableLT = Less thanND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Test Report #: 19H 004511(A1) Page 24 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

Category Leachable Cd(mg/L)

Leachable Pb(mg/L)

X Cups and Mugs (Average of 12) 0.049 0.100

Flatware (Average of 12) 0.189 0.226

Large Hollowware (Average of 12) 0.049 0.100

Small Hollowware (Average of 12) 0.049 0.100

Pitchers (Average of 12) 0.049 0.100

Test Report #: 19H 004511(A1) Page 25 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment over 2,000Pieces) Interior

Test Method: ASTM C738 94(Reapproved 2016)#

Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 17A 17B 17C 17D 17E 17F 17G

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Volume of acid used(mL) 470 470 470 470 470 470 470

Leachable Cadmium(Cd) ND ND ND ND ND ND ND

Leachable Lead (Pb) ND ND ND ND ND ND ND

Conclusion

Specimen No. 17H 17I 17J 17K 17L

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Average(mg/L)

Limit(mg/L)

Volume of acid used(mL) 470 470 470 470 470

Leachable Cadmium(Cd) ND ND ND ND ND ND 0.049

Leachable Lead (Pb) ND ND ND ND ND ND 0.100

Conclusion PASS

Note:mL = Millilitresmg/L (Milligrams per litre) = ppm (Parts per million)NA = Not applicableLT = Less thanND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Test Report #: 19H 004511(A1) Page 26 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

Category Leachable Cd(mg/L)

Leachable Pb(mg/L)

X Cups and Mugs (Average of 12) 0.049 0.100

Flatware (Average of 12) 0.189 0.226

Large Hollowware (Average of 12) 0.049 0.100

Small Hollowware (Average of 12) 0.049 0.100

Pitchers (Average of 12) 0.049 0.100

Test Report #: 19H 004511(A1) Page 27 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment over 2,000Pieces) Interior

Test Method: ASTM C738 94(Reapproved 2016)#

Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 18A 18B 18C 18D 18E 18F 18G

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Volume of acid used(mL) 320 320 320 320 320 320 320

Leachable Cadmium(Cd) ND ND ND ND ND ND ND

Leachable Lead (Pb) ND ND ND ND ND ND ND

Conclusion

Specimen No. 18H 18I 18J 18K 18L

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Average(mg/L)

Limit(mg/L)

Volume of acid used(mL) 320 320 320 320 320

Leachable Cadmium(Cd) ND ND ND ND ND ND 0.049

Leachable Lead (Pb) ND ND ND ND ND ND 0.100

Conclusion PASS

Note:mL = Millilitresmg/L (Milligrams per litre) = ppm (Parts per million)NA = Not applicableLT = Less thanND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Test Report #: 19H 004511(A1) Page 28 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

Category Leachable Cd(mg/L)

Leachable Pb(mg/L)

X Cups and Mugs (Average of 12) 0.049 0.100

Flatware (Average of 12) 0.189 0.226

Large Hollowware (Average of 12) 0.049 0.100

Small Hollowware (Average of 12) 0.049 0.100

Pitchers (Average of 12) 0.049 0.100

Test Report #: 19H 004511(A1) Page 29 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics Interior

Test Method: ASTM C738 94(Reapproved 2016)#Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 10A 10B 10C 10D 10E 10F

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Average(mg/L)

Limit(mg/L)

Volume of acid used(mL) 350 350 350 350 350 350

Leachable Cadmium(Cd) ND ND ND ND ND ND NA 0.5

Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5

Conclusion PASS PASS PASS PASS PASS PASS

Note:mL = Millilitresmg/L (Milligrams per litre) = ppm (Parts per million)NA = Not applicableLT = Less thanND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Category Leachable Cd(mg/L)

Leachable Pb(mg/L)

X Cups and Mugs (Any of 6) 0.5 0.5

Flatware (Average of 6) 0.5 3.0

Large Hollowware (Any of 6) 0.25 1.0

Small Hollowware (Any of 6) 0.5 2.0

Pitchers (Any of 6) 0.25 0.5

Test Report #: 19H 004511(A1) Page 30 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics Interior

Test Method: ASTM C738 94(Reapproved 2016)#Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 11A 11B 11C 11D 11E 11F

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Average(mg/L)

Limit(mg/L)

Volume of acid used(mL) 350 350 350 350 350 350

Leachable Cadmium(Cd) ND ND ND ND ND ND NA 0.5

Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5

Conclusion PASS PASS PASS PASS PASS PASS

Note:mL = Millilitresmg/L (Milligrams per litre) = ppm (Parts per million)NA = Not applicableLT = Less thanND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Category Leachable Cd(mg/L)

Leachable Pb(mg/L)

X Cups and Mugs (Any of 6) 0.5 0.5

Flatware (Average of 6) 0.5 3.0

Large Hollowware (Any of 6) 0.25 1.0

Small Hollowware (Any of 6) 0.5 2.0

Pitchers (Any of 6) 0.25 0.5

Test Report #: 19H 004511(A1) Page 31 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics Interior

Test Method: ASTM C738 94(Reapproved 2016)#Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 12A 12B 12C 12D 12E 12F

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Average(mg/L)

Limit(mg/L)

Volume of acid used(mL) 350 350 350 350 350 350

Leachable Cadmium(Cd) ND ND ND ND ND ND NA 0.5

Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5

Conclusion PASS PASS PASS PASS PASS PASS

Note:mL = Millilitresmg/L (Milligrams per litre) = ppm (Parts per million)NA = Not applicableLT = Less thanND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Category Leachable Cd(mg/L)

Leachable Pb(mg/L)

X Cups and Mugs (Any of 6) 0.5 0.5

Flatware (Average of 6) 0.5 3.0

Large Hollowware (Any of 6) 0.25 1.0

Small Hollowware (Any of 6) 0.5 2.0

Pitchers (Any of 6) 0.25 0.5

Test Report #: 19H 004511(A1) Page 32 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics Interior

Test Method: ASTM C738 94(Reapproved 2016)#Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 13A 13B 13C 13D 13E 13F

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Average(mg/L)

Limit(mg/L)

Volume of acid used(mL) 350 350 350 350 350 350

Leachable Cadmium(Cd) ND ND ND ND ND ND NA 0.5

Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5

Conclusion PASS PASS PASS PASS PASS PASS

Note:mL = Millilitresmg/L (Milligrams per litre) = ppm (Parts per million)NA = Not applicableLT = Less thanND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Category Leachable Cd(mg/L)

Leachable Pb(mg/L)

X Cups and Mugs (Any of 6) 0.5 0.5

Flatware (Average of 6) 0.5 3.0

Large Hollowware (Any of 6) 0.25 1.0

Small Hollowware (Any of 6) 0.5 2.0

Pitchers (Any of 6) 0.25 0.5

Test Report #: 19H 004511(A1) Page 33 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics Interior

Test Method: ASTM C738 94(Reapproved 2016)#Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 14A 14B 14C 14D 14E 14F

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Average(mg/L)

Limit(mg/L)

Volume of acid used(mL) 340 340 340 340 340 340

Leachable Cadmium(Cd) ND ND ND ND ND ND NA 0.5

Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5

Conclusion PASS PASS PASS PASS PASS PASS

Note:mL = Millilitresmg/L (Milligrams per litre) = ppm (Parts per million)NA = Not applicableLT = Less thanND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Category Leachable Cd(mg/L)

Leachable Pb(mg/L)

X Cups and Mugs (Any of 6) 0.5 0.5

Flatware (Average of 6) 0.5 3.0

Large Hollowware (Any of 6) 0.25 1.0

Small Hollowware (Any of 6) 0.5 2.0

Pitchers (Any of 6) 0.25 0.5

Test Report #: 19H 004511(A1) Page 34 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics Interior

Test Method: ASTM C738 94(Reapproved 2016)#Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 15A 15B 15C 15D 15E 15F

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Average(mg/L)

Limit(mg/L)

Volume of acid used(mL) 340 340 340 340 340 340

Leachable Cadmium(Cd) ND ND ND ND ND ND NA 0.5

Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5

Conclusion PASS PASS PASS PASS PASS PASS

Note:mL = Millilitresmg/L (Milligrams per litre) = ppm (Parts per million)NA = Not applicableLT = Less thanND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Category Leachable Cd(mg/L)

Leachable Pb(mg/L)

X Cups and Mugs (Any of 6) 0.5 0.5

Flatware (Average of 6) 0.5 3.0

Large Hollowware (Any of 6) 0.25 1.0

Small Hollowware (Any of 6) 0.5 2.0

Pitchers (Any of 6) 0.25 0.5

Test Report #: 19H 004511(A1) Page 35 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics Interior

Test Method: ASTM C738 94(Reapproved 2016)#Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 16A 16B 16C 16D 16E 16F

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Average(mg/L)

Limit(mg/L)

Volume of acid used(mL) 410 410 410 410 410 410

Leachable Cadmium(Cd) ND ND ND ND ND ND NA 0.5

Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5

Conclusion PASS PASS PASS PASS PASS PASS

Note:mL = Millilitresmg/L (Milligrams per litre) = ppm (Parts per million)NA = Not applicableLT = Less thanND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Category Leachable Cd(mg/L)

Leachable Pb(mg/L)

X Cups and Mugs (Any of 6) 0.5 0.5

Flatware (Average of 6) 0.5 3.0

Large Hollowware (Any of 6) 0.25 1.0

Small Hollowware (Any of 6) 0.5 2.0

Pitchers (Any of 6) 0.25 0.5

Test Report #: 19H 004511(A1) Page 36 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics Interior

Test Method: ASTM C738 94(Reapproved 2016)#Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 17A 17B 17C 17D 17E 17F

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Average(mg/L)

Limit(mg/L)

Volume of acid used(mL) 470 470 470 470 470 470

Leachable Cadmium(Cd) ND ND ND ND ND ND NA 0.5

Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5

Conclusion PASS PASS PASS PASS PASS PASS

Note:mL = Millilitresmg/L (Milligrams per litre) = ppm (Parts per million)NA = Not applicableLT = Less thanND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Category Leachable Cd(mg/L)

Leachable Pb(mg/L)

X Cups and Mugs (Any of 6) 0.5 0.5

Flatware (Average of 6) 0.5 3.0

Large Hollowware (Any of 6) 0.25 1.0

Small Hollowware (Any of 6) 0.5 2.0

Pitchers (Any of 6) 0.25 0.5

Test Report #: 19H 004511(A1) Page 37 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics Interior

Test Method: ASTM C738 94(Reapproved 2016)#Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 18A 18B 18C 18D 18E 18F

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Average(mg/L)

Limit(mg/L)

Volume of acid used(mL) 320 320 320 320 320 320

Leachable Cadmium(Cd) ND ND ND ND ND ND NA 0.5

Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5

Conclusion PASS PASS PASS PASS PASS PASS

Note:mL = Millilitresmg/L (Milligrams per litre) = ppm (Parts per million)NA = Not applicableLT = Less thanND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Category Leachable Cd(mg/L)

Leachable Pb(mg/L)

X Cups and Mugs (Any of 6) 0.5 0.5

Flatware (Average of 6) 0.5 3.0

Large Hollowware (Any of 6) 0.25 1.0

Small Hollowware (Any of 6) 0.5 2.0

Pitchers (Any of 6) 0.25 0.5

Test Report #: 19H 004511(A1) Page 38 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

California Proposition 65 Case No. CGC 04 436729, Leachable Lead and Cadmium from Tableware Lip and Rim

Test Method: ASTM C927 80(2019)#Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 19A 19B 19C 19D 19E 19F

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Limit(mg/L)

Volume of acid used(mL) 220 220 220 220 220 220

Leachable Cadmium(Cd) ND ND ND ND ND ND 2.0

Leachable Lead (Pb) ND ND ND ND ND ND 0.5

Conclusion PASS PASS PASS PASS PASS PASS

Specimen No. 20A 20B 20C 20D 20E 20F

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Limit(mg/L)

Volume of acid used(mL) 210 210 210 210 210 210

Leachable Cadmium(Cd) ND ND ND ND ND ND 2.0

Leachable Lead (Pb) ND ND ND ND ND ND 0.5

Conclusion PASS PASS PASS PASS PASS PASS

Note:mL = Millilitresmg/L (Milligrams per litre) = ppm (Parts per million)LT = Less thanND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Test Report #: 19H 004511(A1) Page 39 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

California Proposition 65 Case No. CGC 04 436729, Leachable Lead and Cadmium from Tableware Lip and Rim

Test Method: ASTM C927 80(2019)#Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 21A 21B 21C 21D 21E 21F

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Limit(mg/L)

Volume of acid used(mL) 210 210 210 210 210 210

Leachable Cadmium(Cd) ND ND ND ND ND ND 2.0

Leachable Lead (Pb) ND ND ND ND ND ND 0.5

Conclusion PASS PASS PASS PASS PASS PASS

Specimen No. 22A 22B 22C 22D 22E 22F

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Limit(mg/L)

Volume of acid used(mL) 180 180 180 180 180 180

Leachable Cadmium(Cd) ND ND ND ND ND ND 2.0

Leachable Lead (Pb) ND ND ND ND ND ND 0.5

Conclusion PASS PASS PASS PASS PASS PASS

Note:mL = Millilitresmg/L (Milligrams per litre) = ppm (Parts per million)LT = Less thanND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Test Report #: 19H 004511(A1) Page 40 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

California Proposition 65 Case No. CGC 04 436729, Leachable Lead and Cadmium from Tableware Lip and Rim

Test Method: ASTM C927 80(2019)#Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 23A 23B 23C 23D 23E 23F

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Limit(mg/L)

Volume of acid used(mL) 180 180 180 180 180 180

Leachable Cadmium(Cd) ND ND ND ND ND ND 2.0

Leachable Lead (Pb) ND ND ND ND ND ND 0.5

Conclusion PASS PASS PASS PASS PASS PASS

Specimen No. 24A 24B 24C 24D 24E 24F

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Limit(mg/L)

Volume of acid used(mL) 180 180 180 180 180 180

Leachable Cadmium(Cd) ND ND ND ND ND ND 2.0

Leachable Lead (Pb) ND ND ND ND ND ND 0.5

Conclusion PASS PASS PASS PASS PASS PASS

Note:mL = Millilitresmg/L (Milligrams per litre) = ppm (Parts per million)LT = Less thanND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Test Report #: 19H 004511(A1) Page 41 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

Canadian Consumer Products Containing Lead Regulations (SOR/2018 83), Total Lead Content

Test Method: ASTM F963 17 Clause 8.3.1Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 1 2 9

Test Item Result(mg/kg)

Result(mg/kg)

Result(mg/kg)

Result(mg/kg)

Result(mg/kg)

Limit(mg/kg)

Total Lead (Pb) ND ND 78 90

Conclusion PASS PASS PASS

Note:mg/kg (Milligrams per kilogram) = ppm (Parts per million) = 0.0001 % m/m (Percent by mass)LT = Less thanND = Not detected (Reporting Limit = 20 ppm)Composite results are based on specimen of least mass resulting in highest potential concentration.

Test Report #: 19H 004511(A1) Page 42 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

Canadian Glazed Ceramics and Glassware Regulations SOR/2016 175, Leachable Lead and Cadmium fromCeramics and Glassware Interior

Test Method: ISO 6486 1:1999Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 10M 10N 10O 10P 10Q 10R

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Limit(mg/L)

Volume of acid used(mL) 355 355 355 355 355 355

Leachable Cadmium(Cd) ND ND ND ND ND ND 0.50

Leachable Lead (Pb) ND ND ND ND ND ND 0.5

Conclusion PASS PASS PASS PASS PASS PASS

Note:mL = Millilitresmg/L (Milligrams per litre) = ppm (Parts per million)LT = Less thanND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Category Leachable Cd(mg/L)

Leachable Pb(mg/L)

X Cups andMugs (Any of 6) 0.50 0.5

Flatware (Any of 6) 0.50 3.0

Large Hollowware (Any of 6) 0.25 1.0

Small Hollowware (Any of 6) 0.50 2.0

Pitchers (Any of 6) 0.25 0.5

Test Report #: 19H 004511(A1) Page 43 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

Canadian Glazed Ceramics and Glassware Regulations SOR/2016 175, Leachable Lead and Cadmium fromCeramics and Glassware Interior

Test Method: ISO 6486 1:1999Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 11M 11N 11O 11P 11Q 11R

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Limit(mg/L)

Volume of acid used(mL) 355 355 355 355 355 355

Leachable Cadmium(Cd) ND ND ND ND ND ND 0.50

Leachable Lead (Pb) ND ND ND ND ND ND 0.5

Conclusion PASS PASS PASS PASS PASS PASS

Note:mL = Millilitresmg/L (Milligrams per litre) = ppm (Parts per million)LT = Less thanND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Category Leachable Cd(mg/L)

Leachable Pb(mg/L)

X Cups andMugs (Any of 6) 0.50 0.5

Flatware (Any of 6) 0.50 3.0

Large Hollowware (Any of 6) 0.25 1.0

Small Hollowware (Any of 6) 0.50 2.0

Pitchers (Any of 6) 0.25 0.5

Test Report #: 19H 004511(A1) Page 44 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

Canadian Glazed Ceramics and Glassware Regulations SOR/2016 175, Leachable Lead and Cadmium fromCeramics and Glassware Interior

Test Method: ISO 6486 1:1999Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 12M 12N 12O 12P 12Q 12R

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Limit(mg/L)

Volume of acid used(mL) 355 355 355 355 355 355

Leachable Cadmium(Cd) ND ND ND ND ND ND 0.50

Leachable Lead (Pb) ND ND ND ND ND ND 0.5

Conclusion PASS PASS PASS PASS PASS PASS

Note:mL = Millilitresmg/L (Milligrams per litre) = ppm (Parts per million)LT = Less thanND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Category Leachable Cd(mg/L)

Leachable Pb(mg/L)

X Cups andMugs (Any of 6) 0.50 0.5

Flatware (Any of 6) 0.50 3.0

Large Hollowware (Any of 6) 0.25 1.0

Small Hollowware (Any of 6) 0.50 2.0

Pitchers (Any of 6) 0.25 0.5

Test Report #: 19H 004511(A1) Page 45 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

Canadian Glazed Ceramics and Glassware Regulations SOR/2016 175, Leachable Lead and Cadmium fromCeramics and Glassware Interior

Test Method: ISO 6486 1:1999Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 13M 13N 13O 13P 13Q 13R

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Limit(mg/L)

Volume of acid used(mL) 355 355 355 355 355 355

Leachable Cadmium(Cd) ND ND ND ND ND ND 0.5

Leachable Lead (Pb) ND ND ND ND ND ND 0.5

Conclusion PASS PASS PASS PASS PASS PASS

Note:mL = Millilitresmg/L (Milligrams per litre) = ppm (Parts per million)LT = Less thanND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Category Leachable Cd(mg/L)

Leachable Pb(mg/L)

X Cups andMugs (Any of 6) 0.50 0.5

Flatware (Any of 6) 0.50 3.0

Large Hollowware (Any of 6) 0.25 1.0

Small Hollowware (Any of 6) 0.50 2.0

Pitchers (Any of 6) 0.25 0.5

Test Report #: 19H 004511(A1) Page 46 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

Canadian Glazed Ceramics and Glassware Regulations SOR/2016 175, Leachable Lead and Cadmium fromCeramics and Glassware Interior

Test Method: ISO 6486 1:1999Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 14M 14N 14O 14P 14Q 14R

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Limit(mg/L)

Volume of acid used(mL) 345 345 345 345 345 345

Leachable Cadmium(Cd) ND ND ND ND ND ND 0.50

Leachable Lead (Pb) ND ND ND ND ND ND 0.5

Conclusion PASS PASS PASS PASS PASS PASS

Note:mL = Millilitresmg/L (Milligrams per litre) = ppm (Parts per million)LT = Less thanND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Category Leachable Cd(mg/L)

Leachable Pb(mg/L)

X Cups andMugs (Any of 6) 0.50 0.5

Flatware (Any of 6) 0.50 3.0

Large Hollowware (Any of 6) 0.25 1.0

Small Hollowware (Any of 6) 0.50 2.0

Pitchers (Any of 6) 0.25 0.5

Test Report #: 19H 004511(A1) Page 47 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

Canadian Glazed Ceramics and Glassware Regulations SOR/2016 175, Leachable Lead and Cadmium fromCeramics and Glassware Interior

Test Method: ISO 6486 1:1999Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 15M 15N 15O 15P 15Q 15R

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Limit(mg/L)

Volume of acid used(mL) 345 345 345 345 345 345

Leachable Cadmium(Cd) ND ND ND ND ND ND 0.50

Leachable Lead (Pb) ND ND ND ND ND ND 0.5

Conclusion PASS PASS PASS PASS PASS PASS

Note:mL = Millilitresmg/L (Milligrams per litre) = ppm (Parts per million)LT = Less thanND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Category Leachable Cd(mg/L)

Leachable Pb(mg/L)

X Cups andMugs (Any of 6) 0.50 0.5

Flatware (Any of 6) 0.50 3.0

Large Hollowware (Any of 6) 0.25 1.0

Small Hollowware (Any of 6) 0.50 2.0

Pitchers (Any of 6) 0.25 0.5

Test Report #: 19H 004511(A1) Page 48 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

Canadian Glazed Ceramics and Glassware Regulations SOR/2016 175, Leachable Lead and Cadmium fromCeramics and Glassware Interior

Test Method: ISO 6486 1:1999Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 16M 16N 16O 16P 16Q 16R

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Limit(mg/L)

Volume of acid used(mL) 415 415 415 415 415 415

Leachable Cadmium(Cd) ND ND ND ND ND ND 0.50

Leachable Lead (Pb) ND ND ND ND ND ND 0.5

Conclusion PASS PASS PASS PASS PASS PASS

Note:mL = Millilitresmg/L (Milligrams per litre) = ppm (Parts per million)LT = Less thanND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Category Leachable Cd(mg/L)

Leachable Pb(mg/L)

X Cups andMugs (Any of 6) 0.50 0.5

Flatware (Any of 6) 0.50 3.0

Large Hollowware (Any of 6) 0.25 1.0

Small Hollowware (Any of 6) 0.50 2.0

Pitchers (Any of 6) 0.25 0.5

Test Report #: 19H 004511(A1) Page 49 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

Canadian Glazed Ceramics and Glassware Regulations SOR/2016 175, Leachable Lead and Cadmium fromCeramics and Glassware Interior

Test Method: ISO 6486 1:1999Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 17M 17N 17O 17P 17Q 17R

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Limit(mg/L)

Volume of acid used(mL) 475 475 475 475 475 475

Leachable Cadmium(Cd) ND ND ND ND ND ND 0.50

Leachable Lead (Pb) ND ND ND ND ND ND 0.5

Conclusion PASS PASS PASS PASS PASS PASS

Note:mL = Millilitresmg/L (Milligrams per litre) = ppm (Parts per million)LT = Less thanND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Category Leachable Cd(mg/L)

Leachable Pb(mg/L)

X Cups andMugs (Any of 6) 0.50 0.5

Flatware (Any of 6) 0.50 3.0

Large Hollowware (Any of 6) 0.25 1.0

Small Hollowware (Any of 6) 0.50 2.0

Pitchers (Any of 6) 0.25 0.5

Test Report #: 19H 004511(A1) Page 50 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

Canadian Glazed Ceramics and Glassware Regulations SOR/2016 175, Leachable Lead and Cadmium fromCeramics and Glassware Interior

Test Method: ISO 6486 1:1999Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 18M 18N 18O 18P 18Q 18R

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Limit(mg/L)

Volume of acid used(mL) 325 325 325 325 325 325

Leachable Cadmium(Cd) ND ND ND ND ND ND 0.50

Leachable Lead (Pb) ND ND ND ND ND ND 0.5

Conclusion PASS PASS PASS PASS PASS PASS

Note:mL = Millilitresmg/L (Milligrams per litre) = ppm (Parts per million)LT = Less thanND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Category Leachable Cd(mg/L)

Leachable Pb(mg/L)

X Cups andMugs (Any of 6) 0.50 0.5

Flatware (Any of 6) 0.50 3.0

Large Hollowware (Any of 6) 0.25 1.0

Small Hollowware (Any of 6) 0.50 2.0

Pitchers (Any of 6) 0.25 0.5

Test Report #: 19H 004511(A1) Page 51 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

Canadian Glazed Ceramics and Glassware Regulations SOR/2016 175, Leachable Lead and Cadmium fromCeramics and Glassware Lip and Rim

Test Method: ASTM C927 80(2014)Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 19A 19B 19C 19D 19E 19F

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Limit(mg/L)

Volume of acid used(mL) 220 220 220 220 220 220

Leachable Cadmium(Cd) ND ND ND ND ND ND 0.4

Leachable Lead (Pb) ND ND ND ND ND ND 4.0

Conclusion PASS PASS PASS PASS PASS PASS

Specimen No. 20A 20B 20C 20D 20E 20F

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Limit(mg/L)

Volume of acid used(mL) 210 210 210 210 210 210

Leachable Cadmium(Cd) ND ND ND ND ND ND 0.4

Leachable Lead (Pb) ND ND ND ND ND ND 4.0

Conclusion PASS PASS PASS PASS PASS PASS

Note:mL = Millilitremg/L (Milligrams per litre) = ppm (Parts per million)LT = Less thanND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Test Report #: 19H 004511(A1) Page 52 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

Canadian Glazed Ceramics and Glassware Regulations SOR/2016 175, Leachable Lead and Cadmium fromCeramics and Glassware Lip and Rim

Test Method: ASTM C927 80(2014)Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 21A 21B 21C 21D 21E 21F

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Limit(mg/L)

Volume of acid used(mL) 210 210 210 210 210 210

Leachable Cadmium(Cd) ND ND ND ND ND ND 0.4

Leachable Lead (Pb) ND ND ND ND ND ND 4.0

Conclusion PASS PASS PASS PASS PASS PASS

Specimen No. 22A 22B 22C 22D 22E 22F

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Limit(mg/L)

Volume of acid used(mL) 180 180 180 180 180 180

Leachable Cadmium(Cd) ND ND ND ND ND ND 0.4

Leachable Lead (Pb) ND ND ND ND ND ND 4.0

Conclusion PASS PASS PASS PASS PASS PASS

Note:mL = Millilitremg/L (Milligrams per litre) = ppm (Parts per million)LT = Less thanND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Test Report #: 19H 004511(A1) Page 53 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

DETAILED RESULTS:

Canadian Glazed Ceramics and Glassware Regulations SOR/2016 175, Leachable Lead and Cadmium fromCeramics and Glassware Lip and Rim

Test Method: ASTM C927 80(2014)Analytical Method: Inductively Coupled Plasma Optical Emission Spectrometry

Specimen No. 23A 23B 23C 23D 23E 23F

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Limit(mg/L)

Volume of acid used(mL) 180 180 180 180 180 180

Leachable Cadmium(Cd) ND ND ND ND ND ND 0.4

Leachable Lead (Pb) ND ND ND ND ND ND 4.0

Conclusion PASS PASS PASS PASS PASS PASS

Specimen No. 24A 24B 24C 24D 24E 24F

Test Item Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Result(mg/L)

Limit(mg/L)

Volume of acid used(mL) 180 180 180 180 180 180

Leachable Cadmium(Cd) ND ND ND ND ND ND 0.4

Leachable Lead (Pb) ND ND ND ND ND ND 4.0

Conclusion PASS PASS PASS PASS PASS PASS

Note:mL = Millilitremg/L (Milligrams per litre) = ppm (Parts per million)LT = Less thanND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)

Test Report #: 19H 004511(A1) Page 54 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

SPECIMEN DESCRIPTION:

Specimen No. Specimen Description Location

1 Translucent soft plastic Gasket (SM 6350/ all SM 6352 styles)

2 Black plastic (PP co) Lid (SM 6350/ all SM 6352 styles)

3 Black/ white printed dull white ceramicWhole of mug (SM 6301BK/ SM 6301WH/SM 6303BK/ SM6303WH/ SM 6321BK/ SM6350WH/ SM 6352BK/ SM 6352WH styles)

4 Green printed dull white ceramic Whole of mug (SM 6301GR style)

5 Navy printed dull white ceramic Whole of mug (SM 6301NBL/ SM 6306NBLstyles)

6 Red/ white printed dull white ceramic Whole of mug (SM 6321RE/ SM 6352REstyles)

7 Matt black/ white printed dull white ceramic Whole of mug (SM 6309BK style)

8 Light blue/ white printed dull white ceramic Whole of mug (SM 6352PBL style)

9 White chalk Chalk (SM 6309BK style)

10 Black printed dull white ceramic Interior of mug (SM 6301BK style)

11 Green printed dull white ceramic Interior of mug (SM 6301GR style)

12 Blue printed dull white ceramic Interior of mug (SM 6301NBL style)

13 White printed dull white ceramic Interior of mug (SM 6301WH/ SM 6309BK/all SM 6321 styles)

14 Black printed dull white ceramic Interior of mug (SM 6303BK style)

15 White printed dull white ceramic Interior of mug (SM 6303WH style)

16 Navy printed dull white ceramic Interior of mug (SM 6306NBL style)

17 White printed dull white ceramic Interior of mug (SM 6350WH styles)

18 White printed dull white ceramic Interior of mug (all SM 6352 styles)

19 Matt black/ white printed dull white ceramic Lip & Rim of mug (SM 6309BK style)

20 Black/ white printed dull white ceramic Lip & Rim of mug (SM 6321BK style)

21 Red/ white printed dull white ceramic Lip & Rim of mug (SM 6321RE style)

22 Black/ white printed dull white ceramic Lip & Rim of mug (SM 6352BK style)

23 Light blue/ white printed dull white ceramic Lip & Rim of mug (SM 6352PBL style)

24 Red/ white printed dull white ceramic Lip & Rim of mug (SM 6352RE style)

Test Report #: 19H 004511(A1) Page 55 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

SPECIMEN DESCRIPTION:

Specimen No. Specimen Description Location

25 Translucent soft plastic (silicone) Gasket (SM 6350WH style)

26 Translucent soft plastic (silicone) Gasket (all SM 6352 styles)

Test Report #: 19H 004511(A1) Page 56 of 56

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The above test(s) is/are accredited under the ISO/IEC 17025 accreditation issued by the ANSI ASQ National Accreditation Board (ANAB)according to certificate and scope of accreditation (Certificate # AT 1500.) Test(s) marked with is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein.This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

CS-HK-RE005-POLY Ver.14

In December 2018, ANSECO became QIMA.

SAMPLE PHOTO:

End Report

TEST REPORTTest Report # 19H 004511(A2) Date of Report Issue: July 17, 2019

Date of Sample Received: June 18, 2019 Pages: Page 1 of 3

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The test result(s) and conclusion(s) in this report relate only to the sample(s) tested as described herein.

This test report may not be reproduced except in full, without written approval of QIMA Testing (HK) LimitedCS-HK-RE004-APP Ver.10

In December 2018, ANSECO became QIMA.

CLIENT INFORMATION:Company: Polyconcept GBS

Recipient: Jenny LiuRecipient Email: [email protected]

SAMPLE INFORMATION:Description: Chalk It Up 11oz Ceramic MugArticle No.: SM 6309BK Purchase Order Number: M000008203

Factory No.: Toy Co./Agency:Vendor No.: 10873 Country of Origin: ChinaCountry of Distribution: United States, Canada Labeled Age Grade:Quantity Submitted: 22 pcs Requested Age Grade:Testing Period: 06/19/2019 07/16/2019 Tested Age Grade:

OVERALL RESULT:PASS

Refer to page 2 for test result summary and appropriate notes.

QIMA Testing (HK) Limited

Dr. Shee Ann LeungTechnical Director

Test Report #: 19H 004511(A2) Page 2 of 3

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The test result(s) and conclusion(s) in this report relate only to the sample(s) tested as described herein.

This test report may not be reproduced except in full, without written approval of QIMA Testing (HK) LimitedCS-HK-RE004-APP Ver.10

In December 2018, ANSECO became QIMA.

TEST RESULTS SUMMARY:

At the request of the client, the following tests were conducted:

CONCLUSION TEST(S) CONDUCTED

PASS Labeling of Hazardous Art Materials Act (LHAMA) Review

PASSToxicological Risk Assessment (TRA) for Canadian Toy Regulations SOR/2011 17 (as perthe Canada Consumer Product Safety Act (S.C. 2010, c.21)) and as amended bySOR/2016 302.

PASSToxicological Risk Assessment (TRA) for 16 CFR 1500.3(b)(5), 1500.3(b)(6), 1500.3(b)(7),1500.3(b)(8) and 1500.3(b)(9). And ASTM F963 17 Standard Consumer SafetySpecification for Toy Safety

Appendix I attached.

End Report

Test Report #: 19H 004511(A2) Page 3 of 3

QIMA Testing (HK) Limited 3/F Liven House, No. 61 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000.The test result(s) and conclusion(s) in this report relate only to the sample(s) tested as described herein.

This test report may not be reproduced except in full, without written approval of QIMA Testing (HK) LimitedCS-HK-RE004-APP Ver.10

In December 2018, ANSECO became QIMA.

Appendix I: Toxicological Risk Assessment /LHAMA (Report 17 2452 RA60008) from Delphic HSE Solutions Ltd.