ASSIGNMENT 1

2D AND 3D APPLICATION

Due date: 14 October 2011

1. Sketch 2D.

Reconstruct the drawing below using sketch method and following by

constraint in order to make sure the dimensions according to the drawing

given. Save the drawing file and write down the file name including its

location.

a. units are in Millimeters.

b. units are in Inches.

2. Solid 3D Drawing.

Reconstruct the drawing below in 2D and 3D solid modeling with necessary

Dimension using CATIA V5 R19 or others CAD/CAM soft ware. If used others

soft ware please safe in Neutral file Format ( stl, igs or stp ).

a. All units are in Millimeters

b. All units are in Millimeters