2020-04-27

Assembly instructions for Rehatec Galileo MED3300

1. Remove wheels on both sides. 2. Remove sleeves and anti-tip devices from the wheelchair.

3. Check the correct placement for the stop pin and that the battery box is removed.

2020-04-27

4. Assembly the plate (right side) according to picture. Parts pair mounting set for right side: Item No. Part Number Qty Description 1 HW051 1 Sleeve M16X1 2 100 400 007 1 Spacer 3 100 400 014 1 Spacer 4 100 400 001 1 Spacer 5 405239 1 Nordlock M16 Washer 6 XSM8X40 1 Screw Round M8 x 40 7 XSM8ML 1 Nut Self-Locking M8 8 XSM8BR 1 Plain Washer M8 9 XSM16M 1 Nut M16 x1 10 XSM16FJ 1 Singel Coil Washer M16 11 MED2000 1 Bracket 12 100 400 017 1 Spacer Back rested battery bag 1 Battery Bag

5. Assemble the back rested battery bag on the wheelchair.

2020-04-27

Attendant control with joystick (left and right side)

Item No. Part Number Qty Description 1 XOC-48110-A1 1 Joystick 2 MED1316 1 Plate with pin 3 XSM6X16 2 Screw M6 x 16 4 MC6SM6X35 1 Screw M6 x 35 5 XSM6BR 3 Plain Washer 6,4 6 XSM6ML 3 Locknut M6 7 MED1317 1 Bracket 8 Xklamma2 1 XClamp2 9 100 400 044 1 Spacer

Move this too the other side, if you assemble the joystick on the left side.

2020-04-27

Alternative attendant control (only right side)

Item No. Part Number Qty Description 1 XSM6TG 1 Thorn Washer 6,4 2 Xklamma2 1 XClamp2 3 MC6SM6X20 1 Screw M6 x 20 4 XSM6BR 1 Plain Washer 6,4 5 MED1200 1 Attendant control

2020-04-27

Åtdragningsmoment / Tightening torque

Metriska grovgängor, stål. Metric coarse threads, steel.

Gänga / Thread Åtdragningsmoment / Tightening

torque

M3 1,2 Nm

M4 3 Nm

M5 6 Nm

M6 10 Nm

M8 25 Nm

M10 50 Nm

M12 85 Nm

Navhylsor. Sleeves.

Gänga / Thread Åtdragningsmoment / Tightening

torque

M16x1 30 Nm

M18x1 40 Nm