If you can't read please download the document
Upload
aspro-brazil-se-iglesias
View
53
Download
1
Tags:
Embed Size (px)
Citation preview
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Side Feed Injectors
NISSAN CFI
SINGLE UNIT
BOSCH
Use Test Adapter 2 2-15597
(single block) or
Test Adapter 2-15528 (twin block)
2-15322
O-RING (UPPER)
2-15306
FILTER
2-15321
O-RING (LOWER)
2-15597
(single block w/harness)
2-15528
(twin block w/harness)
2222----15669156691566915669 CUPCUPCUPCUP (Bosch Style Only)(Bosch Style Only)(Bosch Style Only)(Bosch Style Only)
Section 4 Page Section 4 Page Section 4 Page Section 4 Page 16161616
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Side Feed Injectors
CHRYSLER
CFI
SINGLE UNIT
BOSCH
(LONG VERSION) 2-15597
(single block)
or
Test Adapter 2-15528
(twin block)
2-15065
FILTER
2-15322 O-RING (UPPER)
2-15321 O-RING (LOWER)
2-15669
2-15597 (single block w/harness)
2-15528 (twin block w/harness)
2222----15669156691566915669 CUPCUPCUPCUP (Bosch Style Only)(Bosch Style Only)(Bosch Style Only)(Bosch Style Only)
Section 4 Page Section 4 Page Section 4 Page Section 4 Page 17171717
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Side Feed Injectors
SUZUKI
MONOPOINT
DENSO
Use Test Adapter 2-15525
(single block)
2-15027
O-RING
2-15026
O-RING
REPLACEMENT FILTER CURRENTLY
NOT AVAILABLE DO NOT REMOVE
FILTER
2-15114
DUST CAP
2-15525
ADAPTER BLOCK WITH CUSTOM HARNESS
Section 4 Page Section 4 Page Section 4 Page Section 4 Page 18181818
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Vortec Injectors
Use Test Adapter 2-15631 (tests &
cleans complete assembly )
Connect injectors with 2-15629
Universal Harness
GM VORTEC
4.3L V-6 & 5.7L CPI
SPRAYING SECURING FLOWING
2-15631 Test Adapter Kit
Includes plastic cleaning tray (see below) for ultrasonic cleaning of individual
injector coils & frame mount shown below.
Injector components not available at this time
2-15631
Test Adapter Stainless Steel
Frame in Anodized Aluminum
Rail Complete with cleaning
tray
2-15660
Cleaning Tray
2-15629
Vortec Harness
Section 5 Page Section 5 Page Section 5 Page Section 5 Page 1111
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
GM VORTEC
4.3L V-6 CPI
MODELS 92-95
Use Test Adapter 2-15630
(tests complete assembly)
ASNU 108A
O-RING Early style GM Vor-
tex 4.3L
ASNU 108B
O-RING Early style GM Vor-
tex 4.3L
ASNU 108C
O-RING Early style GM
Vortex 4.3L
ASNU 108D
O-RING Early style GM Vor-
tex 4.3L
ASNU 108E
O-RING Early style GM
Vortex 4.3L
2-15630
Test Adapter Kit
ASNU 108T
Cleaning Tray
(optional)
Vortec Injectors
Section 5 Page Section 5 Page Section 5 Page Section 5 Page 2222
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Accessories, Components and Adaptors
2-15627
BIO-CLEAN ULTRASONIC CLEANING FLUID
5 LITER BOTTLE
2-15593
FLOW-RITE
CALIBRATION FLUID
5 LITER BOTTLE
ASNU 46
ADAPTER COUPLING HITACHI INJECTORS
USED ON AUDI QUATTRO
2-15532
8MM FEMALE ADAPTER COUPLING FOR
8MM MALE COLD START INJECTOR
2-15533
10MM MALE ADAPTER COUPLING
FOR 10MM FEMALE COLD START
INJECTOR
2-15534
ADAPTER COUPLING COLD START
INJECTOR HOSE TYPE (12-13MM)
2-15535
10MM FEMALE ADAPTER COUPLING
FOR 10MM MALE COLD START
INJECTOR
2-15511
ADAPTER COUPLING TOP FEED MULTI-
PORT INJECTORS WITH FILTER
BASKET REMOVED
2-15512
SMALL O-RING FOR 2-15511 COUPLING
Section 6 Page Section 6 Page Section 6 Page Section 6 Page 1111
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
2-15513
LARGE (TOP) O-RING FOR ASNU ADAPTER
COUPLING
2-15514
8MM MALE ADAPTER COUPLING FOR 10MM
FEMALE CIS (K-JET)
2-15515
12MM FEMALE ADAPTER COUPLING
FOR 12MM MALE CIS (K-JET)
ASNU 56
ADAPTER COUPLING FOR SLIM TOP
SIEMENS GDI INJECTORS TESTS INJEC-
TORS WITHOUT REMOVING INLET FILTER
2-15536
ADAPTER COUPLING BOSCH, LUCAS,
WEBER, MARELLI, SIEMENS TESTS
INJECTORS WITHOUT REMOVING INLET
FILTER
2-15537
ADAPTER COUPLING TESTS
MULTIPORT INJECTORS WITH FUEL
HOSE INSTALLED
2-15538
ADAPTER COUPLING SLIM TYPE DENSO
TESTS INJECTORS WITHOUT REMOVING
INLET FILTER
2-15502
UNIVERSAL INJECTOR HARNESS
CONNECTS MOST MULTIPORT INJECTORS
2-15610
REPAIR KIT FOR MAIN ASNU
INJECTOR HARNESS
NOT AVAILABLE
Accessories, Components and Adaptors
Section 6 Page Section 6 Page Section 6 Page Section 6 Page 2222
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
2-15518
ADAPTER BLOCK
GM TBI MAXI WITH CUSTOM HARNESS
(single block - use 2-15598 for double
block)
2-15519
ADAPTER BLOCK
GM TBI MULTEC WITH CUSTOM HARNESS
(single block - use 2-15632 for Quad
Block)
2-15526
ADAPTER BLOCK
FORD CFI - HOLLEY SPI CHRYSLER &
BOSCH WITH CUSTOM HARNESS
(single block - use 2-15528 for double
block)
2-15522
ADAPTER KIT
MITSUBISHI MPI WITH CUSTOM HAR-
NESS
(Tests 2 injectors)
2-15529
ADAPTER BLOCK
NISSAN / SUBARU SPI
(Tests 4 injectors)
2-15524
ADAPTER BLOCK
BOSCH SPI
(Tests 1 injector)
2-15525
ADAPTER BLOCK
SUZUKI SPI
(Tests 1 injector)
2-15530
ADAPTER BLOCK
FORD ZETA MPI / SPI
(BOSCH / WEBER / SIEMENS / DENSO)
(Tests 4 injectors)
ADAPTER BLOCK
NISSAN / SUBARU SPI
(Tests 1 injector)
Injector Index
Section 6 Page Section 6 Page Section 6 Page Section 6 Page 3333
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Accessories, Components and Adaptors
FILTER BASKET
REMOVAL TOOL
T-HANDLE TYPE
2-15638
CUSTOM NYLON COVER
FOR ASNU MACHINE
NLA
"FOAMEX"
WEATHERPROOF SIGN
COMPONENT ASSTS
2-15100 / FILTERS & CAPS
2-15200 /O'RINGS-SEALS
2-15300 /MONOPOINT KIT
2-15639
PINTLE CAP & FILTER BASKET
ASSEMBLY TOOL
2-15594
PINTLE CAP
REMOVAL TOOL
GUN TYPE
2-15595
FILTER REMOVAL TOOL
GUN TYPE
2-15510
RUBBER BENCH MAT
2-15521
PLASTIC
RAIL HOLDER
DISCONTINUED DISCONTINUED
Section 6 Page Section 6 Page Section 6 Page Section 6 Page 4444
FILTER BASKET
REMOVAL TOOL
T-HANDLE TYPE
2-15638
CUSTOM NYLON COVER
FOR ASNU MACHINE
NLA
"FOAMEX"
WEATHERPROOF SIGN
COMPONENT ASSTS
2-15100 / FILTERS & CAPS
2-15200 /O'RINGS-SEALS
2-15300 /MONOPOINT KIT
2-15639
PINTLE CAP & FILTER BASKET
ASSEMBLY TOOL
2-15594
PINTLE CAP
REMOVAL TOOL
GUN TYPE
2-15595
FILTER REMOVAL TOOL
GUN TYPE
2-15510
RUBBER BENCH MAT
2-15521
PLASTIC
RAIL HOLDER
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
2-15640
WEBER / SIEMENS
TOP FEED MULTIPOINT
"MINI PECO INJECTOR"
ADAPTER PLATE
2-15605
INJECTOR SERVICE
REPORT PAD
50 SELF CARBON
(ENGLISH ONLY)
2-15531
TBI ADAPTER RING
USE W/ 2-15507 CRADLE
LARGE TBI INJECTORS
(GM MAXI)
2-15601
TBI ADAPTER RING
USE W/ 2-15507 CRADLE SMALL TBI IN-
JECTORS
GM MULTEC / DAEWOO
2-15520
CIS (K-JET) INJECTOR
CLEANING TRAY
2-15641
SIDE FEED INJECTOR CLEANING
TRAY
(SHALLOW)
ASNU 1992 onward
2-15600
ASNU UPTO 1992 (DEEP)
2-15642
CLEANING TRAY
PECO INJECTOR
2-15598
ADAPTER BLOCK
GM TBI MAXI
(Tests 2 injectors, includes custom harness)
2-15607
ADAPTER BLOCK
NISSAN / TOYOTA 2 WIRE
(Tests 2 injectors, includes blanking off
plug & custom harness
Accessories, Components and Adaptors
Section 6 Page Section 6 Page Section 6 Page Section 6 Page 5555
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Injector Index
2-15609
ADAPTER BLOCK
NISSAN JECS
(Tests 6 injectors)
2-15606
ADAPTER BLOCK
TOYOTA JECS MPI
PREVIA / TARAGO
(Tests 6 injectors)
ASNU 105
ADAPTER BLOCK
NISSAN PATHFINDER / NAVARA
(Tests 4 injectors)
2-15608
ADAPTER BLOCK
NISSAN / SUBARU SPI
(Tests 6 injectors)
2-15634
ADAPTER BLOCK
MAZDA / DENSO
(Tests 6 injectors)
2-15630
ADAPTER GM VORTEC 4.3 EARLY VERSION
(Tests complete assembly)
Section 6 Page Section 6 Page Section 6 Page Section 6 Page 6666
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Injector Index
2-15631
ADAPTER KIT GM VORTEC 4.3L & 5.7L LATE VERSION
(Tests complete assembly includes cleaning tray)
Section 6 Page Section 6 Page Section 6 Page Section 6 Page 7777
Echlin Part Numbers 2-15630 and 2-15631 Adapters comes complete with 2-15629 harness and plastic cleaning tray for ultrasonic cleaning of individual injector coils.
2-15629 Harness assembly is a available separately.
The later GM Vortec (late) system is a Multi Point operation with 6 or 8 individual injectors mounted in the housing, allowing either a simultaneous or sequential injection delivery.
The fuel is pressurized into the injector housing and as the injector is electronically opened, the fuel is pressure fed into a nylon delivery tube. At the end of the tube is a pressure poppet valve. The poppet valve sits in the inlet manifold and can be subject to extremely harsh conditions that may affect the per-formance of the valve. The opening and closing of the poppet valve is controlled by pressure and deter-
mines the fuel distribution, fuel atomization and the fuel delivery to each cylinder. The is therefore very important to examine the performance of this system, both before servicing (to un-derstand the cause of the engine problem) and after, to ensure the cause of the problem had been elimi-
nated and that the system is working properly.
SPRAYING SECURING FLOWING
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Injector Index
2-15631
ADAPTER KIT GM VORTEC 4.3L & 5.7L LATE VERSION
(Tests complete assembly includes cleaning tray)
2-15635
ADAPTER BLOCK
FORD ZETA / SIEMENS
CHRYSLER 3.5L
(Tests 6 injectors)
2-15636
ADAPTER BLOCK
HONDA CIVIC
NIKI KEIHIN
(Tests 2 injectors
Section 6 Page Section 6 Page Section 6 Page Section 6 Page 8888
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Accessories, Components and Adaptors
2-15637
Section 6 Page Section 6 Page Section 6 Page Section 6 Page 9999
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Accessories, Components and Adaptors
Section 6 Page Section 6 Page Section 6 Page Section 6 Page 10101010
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Numerical Parts Listing Echlin # DESCRIPTION
2-15001 Standard Injector Filter Basket with Brass Collar
2-15002 K-Jetronic (CIS) Injector O'Ring
2-15003 BMW Finned Pintle Insulator Cap - Yellow
2-15004 Standard L-Jetronic O'Ring - 15mm - Black
2-15006 L-Jetronic / Nissan / GM Injector Head Seal - Medium
2-15007 Nippon Denso Injector Rail Dust Seal (50)
2-15008 O'Ring Toyota Bottom Small Flat
2-15009 Toyota / Mazda / Nippon Denso Top O'Ring Seal
2-15010 D-Jetronic Injector O'Ring Head Seal - Small
2-15011 DUST SEAL OD 27MM ID22MM WIDTH 8MM
2-15012 Bosch L-Jetronic Injector Spacer - 2mm
2-15014 Nikki Injector Head Seal
2-15015 Nikki Injector Top O'Ring
2-15016 Honda Injector Grommet
2-15017 Bosch Trumpet End Pintle Cap
2-15018 Bosch/Nippon Denso Standard Pintle Insulator Cap
2-15019 L-Jetronic Standard Pintle Insulator Cap-Black
2-15020 D-Jetronic Pintle Insulator Cap-Black 18mm
2-15021 CAP, PKG TOYOTA PINTLE
2-15022 24 Compartment tray
2-15024 FERRULE, PKG
2-15026 O-RING, PKG INJECT LOW
2-15027 O-RING, PKG INJECT UPP
2-15029 NA FROM ACE
2-15029 O-RING, PKG INJECT UPP
2-15030 O-RING, PKG INJECT LOW
2-15031 SIDE FEED FILTER, PMAXI TBI INJ
2-15032
2-15032 O-RING, PKG INJECT UPP
Section 7 Page Section 7 Page Section 7 Page Section 7 Page 1111
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Numerical Parts Listing 2-15033 COLLAR, PKG INJECTOR
2-15035 Pintle Cap
2-15036 O-RING, PKG AUX INJECT
2-15039 Nissan/Toyota Side Feed Injector - Top- O-Ring
2-15040 SEAL, PKG INJECT UPPER
2-15041 SEAL, PKG INJECTOR
2-15042 CLIP, PKG INJECTOR
2-15043 O-RING, PKG INJECT LOW
2-15048 SEAL, PKG INJECTOR
2-15049 SEAL, PKG INJECTOR
2-15050 SEAL, PKG INJECTOR
2-15051 SEAL, PKG INJECTOR
2-15052 SEAL, PKG INJECTOR
2-15053 SEAL, PKG INJECTOR
2-15055 INSULATOR, PKG TOYOTA
2-15056 INSULATOR, PKG TOYOTA
2-15058 INSULATOR, PKG TOYOTA
2-15059 INSULATOR, PKG TOYOTA
2-15060 O-RING, PKG INJECTOR
2-15061 O-RING, PKG INJECTOR
2-15062 O-RING, PKG INJECTOR
2-15064 FILTER, HONDA INJECTOR
2-15065
2-15065 Screen Filter 25pk
2-15066 CLIP, SPI BOSCH
2-15067 CAP, MAZDA PINTLE
2-15068 CAP, FORD LRG PINTLE
2-15069 CAP, FORD SMALL PINTLE
2-15070 CAP, FORD 2HOLE PINTLE
Page Page Page Page 2222
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Numerical Parts Listing 2-15071 O-RING, TOYOTA
2-15072 CAP, WEBER PINTLE
2-15074 Fuel Injector Pintle Cap
2-15075 SPACER, NISSAN INJECTOR
2-15076
2-15076 Fuel Injector Filter Screen
2-15077 Fuel Injector Filter Screen
2-15091 FUEL INJECTOR HOSE
2-15092 SPACER, ROCH INJECTOR
2-15093 FILTER, TBI INJECT LOW
2-15094 Inj. O-Ring 25pk
2-15095 CAP, PINTLE L-JET
2-15096 VAPOR CAP 2-HOLE
2-15097 CAP, DENSO 2HOLE VAPOR
2-15098 CAP, 2HOLE INSULATOR
2-15099 CAP, FORD INSULATOR
2-15100 Multipoint Fuel Injection Kit 2 - O'Rings, Rubber Seals & Dust Caps.
2-15101 BMW CIS (K-Jetronic) Injector O'Ring
2-15102 Mazda Injector O'Ring - Lower Mazda Injector Head Seal
2-15103 Rail Washer 100pk
2-15104 Mazda Injector O'Ring - Lower Mazda Injector Head Seal
2-15106 Mazda Grommet
2-15107 Mazda Air Bleed Socket O'Ring
2-15108 Cadillac Fuel Rail Grommet
2-15109 Audi CIS (K-Jetronic) Injector Seal
2-15110 Injector Protective Cap - Small
2-15111 Injector Protective Cap Rail Fitted Injector Protective Dust Cap
2-15112 Injector Protective Cap
2-15113 Injector Protective Cap Hose Fitted Injector Protective Dust Cap
2-15114 Injector Protective Cap - Large
Page Page Page Page 3333
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Numerical Parts Listing
2-15300 Singlepoint/Monopoint Fuel Injection Kit 3 - Fiter Baskets, O'Rings & Seals.
2-15301 Rochester bottom filter basket
2-15302 Ford Injector O'Ring - Upper
2-15304 Ford Injector Mounting - Lower O'Ring
2-15305 Hitachi InjectorO'Ring - Small
2-15306 Hitachi Injector Filter Screen
2-15306 Bosch/Chrysler / Hitachi Tbi Filter Screen
2-15307 Rochester TBI Model 700 Injector O'Ring - Upper
2-15308 Inj. Washer 25pk
2-15309 Holley Tbi Injector O'ring - Lower
2-15310 Nissan Injector O'Ring
2-15311 Rochester TBI Larger Filter Screen (50)
2-15312 Ford Injector Filter Screen
2-15313 Bosch Injector O'Ring BLACK (50)
2-15314 Holley Tbi Upper O'ring
2-15315 Rochester Injector Housing Dust Seal
2-15316
2-15316 Niisan Single Point Injector
2-15317 Injector Body Support Rubber - Thick(SQUARE CORNERS)
2-15318 Bosch Injector O'Ring
2-15319 Rochester TBI Large - Lower O'Ring
2-15320 Rochester/Bendix/Weber small TBI O'Ring - Upper
2-15321 Bosch/Chrysler / Hitachi Tbi O'ring - Lower
2-15322 Bosch/Chrysler / Hitachi Tbi O'ring - Upper
2-15323 Chrysler / Hitachi Injector O'Ring
2-15500 ASNU Ultrasonic Injector Cleaner & Flow Bench
2-15502 Universal Injector Harness - Connects most multiport Injectors
2-15503 Plastic Moulded Flow Display Window
2-15504 Calibration Fluid Tank Cover
2-15506 Power Cord USA - 3metre
Page Page Page Page 4444
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Numerical Parts Listing 2-15507 Ultrasonic Bath Injector Cradle
2-15508 Steel Braided Fuel Hose Complete with Quick Coupler
2-15509 Glass Measuring Cylinder - MM
2-15510 Rubber Bench Mat
2-15511 Adaptor Coupling Top Feed Multiport Injectors w/filter basker removed
2-15512 Small O-Ring for 2-15511 Coupling
2-15513 Large(TOP) O-Ring for 2-15511 Adaptor Coupling
2-15514 8mm Male Adaptor for 10MM Female CIS (K-Jet)
2-15515 12mm Female Adaptor Coupling for 12MM Male CIS (K-Jet)
2-15518 Adaptor Black GM TBI Maxi with Custom Harness (single block / use 2-15598 for double block)
2-15519 GM TBI Multec w/Custom Harness (single block / use 2-15632 for Quad block)
2-15520 CIS K-Jet Cleaning Tray
2-15521 Plastic Fuel Rail Holder
2-15522 Adaptor Kit Mitsubishi MPI w/Custom Harness(Tests two injectors) ECI Two
2-15523 Adaptor Block Nissan / Subaru SPI (tests 1 injector)
2-15524 Adaptor Block Bosch SPI (tests 1 injector)
2-15525 Adaptor Block Suzuki SPI (tests 1 injector)
2-15526 Adaptor Block Ford CFI - Holly SPI Chrysler & Bosch w/Custom Harness (single block / use 2-15528 for double block)
2-15527 Adaptor Block Bosch / Holly / Nissan / Ford (tests 2 injectors)
2-15528 Adaptor Block Bosch / Holly / Nissan / Ford (tests 2 injectors)
2-15529 Adaptor Block Subaru / Nissan SPI (tests 4 Injectors)
2-15530 adaptor Block Ford Zeta MPI /SPI (Bosch / Weber / Siemens / Denso) (tests 4 injectors)
2-15531 TBI Adaptor Ring - use w/2-15507 Cradle large TBI Injectors (GM Maxi)
2-15532 8mm Female Adaptor For 8mm Male Cold Start Injector
2-15533 10mm Male Adaptor for 10mm Female Cold Start Injector
2-15534 Adaptor Coupling Cold Start Injector Hose Type 12-13MM
2-15535 10mm Female Adaptor Coupling for 10MM Male Cold Start Injector
2-15536 Adaptor Coupling Bosch, Lucas, Weber, Marelli, Siemens - Tests Injector w/o
2-15537 Adaptor Coupling Tests Multiport Injectors with Hose Attached
2-15538 Adzaptor Coupling Slim Tyope Denso - Tests Injectors w/o removing inlet filter
Page Page Page Page 5555
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Numerical Parts Listing 2-15539 Calibration Fluid In-Line Fuel Filter
2-15540 Calibration Fluid In-Tank Pre-pump Filter
2-15562 Ultrasonic Tank Complete Assembly
2-15593 Flow Rite calibration fluid
2-15594 Pintle Cap Removal Tool - Hand Gun Type
2-15595 Filter Basket Removal Tool - Hand Gun Type
2-15597 Adaptor Block Ford CFI - Holly SPI Chrysler & Bosch w/Custom Harness (single block / use 2-15528 for double block)
2-15598 GM-TBI Large (TBI) Dual Injector Manifold and Harness Kit
2-15599 ASNU Main Board-Service Exchange ($750 Core)
2-15600 Side Feed Injector Cleaning Tray (Deep)
2-15601 TBI Adaptor Ring - use w/2-15507 Cradle Small TBI Injectors (GM Multec / Dae-woo)
2-15602
2-15603 Quick Reference Wall Chart - English
2-15604 Instruction Manual
2-15605 Injector Service Report Pad (50 Pages per Pad)
2-15606 Toyota Tarago/Previa Quad Injector Manifold Kit
2-15607 Nissan / Toyota 2 Wire Dual Injector Manifold and Harness Kit
2-15608 Subaru / Nissan Maxima 6 Injector Manifold Kit
2-15609 Nissan Navara Multipoint Six Injector Manifold Kit
2-15610 Repair Lits for Main Injector Harness
2-15612 Injector Blank - Nissan / Toyota 2 Wire
2-15613 Injector Blank - Nissan Navara Multipoint
2-15627 Bio-Clean Ultrasonic Cleaneing Fluid
2-15629 Universal Injector Harness for Vortec System
2-15629 Wiring Harness for Vortec
2-15630 Adaptor Block GM Vortec 4.3 - Early Version
2-15631 Adaptor Kit GM Vortec - 4.3 & 5.7 Later Version
2-15632 Adaptor Block GM TBI Multec 700 ( tests 4 injectors) includes harness
2-15634 Adaptor Block Mazda / Denso (tests 6 injectors) 2-15635 Adaptor Block Ford Zeta / Siemens Chrysler 3.5 (tests 6 injectors)
Page Page Page Page 6666
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Numerical Parts Listing 2-15636 Adaptor Block Honda Civic / Nikki Keihen (tests 2 injectors)
2-15637 Custom Harness Delphi Pin Type Connectors (tests up to 8 injectors)
2-15638 Injector Nylon Cover for 2-15500 ASNU Machine
2-15639 Injector Filter Basket & Pintle Cap Assembly Tool
2-15640 Adaptor Plate for Weber / Siemens (Mini Peco Injector)
2-15641 Side Feed Injector Cleaning Tray (Shallow) 1992 onward / 2-15600 up to 1992 (Deep)
2-15642 Perspex cleaning tray for K-jet & Weber/Sieman Mini Peco injectors
2-15643 Magnetically Couples Electric High Performance Pump
2-15644 High Performance Fuel Rail Top Feed Injectors (tests 8 injectors) includes extension bolts for long GDI injectors
2-15645 Lid for ultra-sonic tank
2-15646 GDI injector Drive box
2-15647 Mercury Optimax
2-15648 Filter removal tool replacement bit
2-15649 Late Bosch Pintle
2-15650 Late Bosch Pintle
2-15651 Late Bosch Pintle
2-15652 Late GM Pencil Pintle
2-15653 Top O-Ring Retainer
2-15654 GM Vortex 4.3L V5 CPI Filter
2-15655 Pintle Cap Holden
2-15656 Pintle Cap Ford AU
2-15660
2-15660 NA FROM ACE
2-15661 NA FROM ACE
2-15662 1MM Spacer
2-15663 Pintle Cap; Ribbed for BNW w/4MM hole for 24V engine
2-15669 SPI/TBI Plastic Clip Cover
2-15671 Pintle Cap
2-15671 Pintle Cap- Bosch Cone Type Single Point Injector
2-15672
Page Page Page Page 7777
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Numerical Parts Listing
2-15672 NA FROM ACE
2-15673 Upper O-Ring - Nissan SPI / MPI
2-15674 O-RING, PKG INJECTOR
2-15679 14.5 MM O-RING Brown
2-15682 Hitachi InjectorO'Ring Seal - Upper Large
2-15685 O-RING, PKG INJECTOR
2-15687 NA FROM ACE
2-15689 O-RING, PKG
2-15690 Top O-Ring for Mazda Side Feed Injectors
2-15692 NA FROM ACE
2-15693 NA FROM ACE
2-15698 Pintle Cap - Large Hole Type for "V" Spray Injectors
TBA Brass / Plastic Filter Basket for Lucas Injectors
TBA Brass / Wire Filter Basket for Weber Injectors
Page Page Page Page 8888