Asme9 Appendices

APPENDIX A — MANDATORYSUBMITTAL OF

TECHNICAL INQUIRIES TO THE BOILERAND PRESSURE VESSEL COMMITTEE

A-100 INTRODUCTION

The ASME Boiler and Pressure Vessel Committeeand its Subcommittees, Subgroups, and Working Groupsmeet regularly to consider revisions of the Code rules,new Code rules as dictated by technological develop-ment, Code Cases, and Code interpretations. This Ap-pendix provides guidance to Code users for submittingtechnical inquiries to the Committee. Technical inquiriesinclude requests for revisions or additions to the Coderules, requests for Code Cases, and requests for Codeinterpretations.

Code Cases may be issued by the Committee whenthe need is urgent. Code Cases clarify the intent ofexisting Code requirements or provide alternative re-quirements. Code Cases are written as a question anda reply and are usually intended to be incorporatedinto the Code at a later date. Code interpretationsprovide the meaning of or the intent of existing rulesin the Code and are also presented as a question anda reply. Both Code Cases and Code interpretations arepublished by the Committee.

The Code rules, Code Cases, and Code interpretationsestablished by the Committee are not to be consideredas approving, recommending, certifying, or endorsingany proprietary or specific design or as limiting in anyway the freedom of manufacturers or constructors tochoose any method of design or any form of constructionthat conforms to the Code rules.

As an alternative to the requirements of this Appen-dix, members of the Committee and its Subcommittees,Subgroups, and Working Groups may introduce requestsfor Code revisions or additions, Code Cases, and Codeinterpretations at their respective Committee meetingsor may submit such requests to the secretary of aSubcommittee, Subgroup, or Working Group.

Inquiries that do not comply with the provisions ofthis Appendix or that do not provide sufficient informa-

229

tion for the Committee’s full understanding may resultin the request being returned to the inquirer with noaction.

A-200 INQUIRY FORMAT

Submittals to the Committee shall include:(a) Scope.Specify one of the following:

(1) Revision of present Code rule(s).(2) New or additional Code rule(s).(3) Code Case.(4) Code interpretation.

(b) Background.Provide the information needed forthe Committee’s understanding of the inquiry, beingsure to include reference to the applicable Code Section,Division, Edition, Addenda, paragraphs, figures, andtables. Preferably, provide a copy of the specific refer-enced portions of the Code.

(c) Presentations.The inquirer may desire or beasked to attend a meeting of the Committee to makea formal presentation or to answer questions fromthe Committee members with regard to the inquiry.Attendance at a Committee meeting shall be at theexpense of the inquirer. The inquirer’s attendance orlack of attendance at a meeting shall not be a basis foracceptance or rejection of the inquiry by the Commitee.

A-300 CODE REVISIONS OR ADDITIONS

Requests for Code revisions or additions shall providethe following:

(a) Proposed Revision(s) or Addition(s).For revi-sions, identify the rules of the Code that require revisionand submit a copy of the appropriate rules as theyappear in the Code marked up with the proposed

A-300 1998 SECTION IX A-600

revision. For additions, provide the recommended word-ing referenced to the existing Code rules.

(b) Statement of Need.Provide a brief explanationof the need for the revision(s) or addition(s).

(c) Background Information.Provide background in-formation to support the revision(s) or addition(s) in-cluding any data or changes in technology that formthe basis for the request that will allow the Committeeto adequately evaluate the proposed revision(s) or addi-tion(s). Sketches, tables, figures, and graphs should besubmitted as appropriate. When applicable, identify anypertinent paragraph in the Code that would be affectedby the revision(s) or addition(s) and paragraphs in theCode that reference the paragraphs that are to be revisedor added.

A-400 CODE CASES

Requests for Code Cases shall provide aStatementof Need and Background Informationsimilar to thatdefined in A-300(b) and A-300(c), respectively, forCode revisions or additions. The proposed Code Caseshould identify the Code Section and Division and bewritten as aQuestionand aReply in the same formatas existing Code Cases.

A-500 CODE INTERPRETATIONS

Requests for Code interpretations shall provide thefollowing:

230

(a) Inquiry. Provide a condensed and precise ques-tion, omitting superfluous background information, and,when possible, composed in such a way that a “yes”or a “no” Reply, possibly with brief provisos, is accept-able. The question should be technically and editoriallycorrect.

(b) Reply.Provide a proposedReplythat will clearlyand concisely answer theInquiry question. Preferably,the Replyshould be “yes” or “no” with brief provisos.

(c) Background Information.Provide any back-ground information that will assist the Committee inunderstanding the proposedInquiry and Reply.

A-600 SUBMITTALS

Submittals to and responses from the Committeeshall meet the following:

(a) Submittal.Inquiries from Code users shall prefer-ably be submitted in typewritten form; however, legiblehandwritten inquiries will also be considered. Theyshall include the name, address, telephone number, anda fax number, if available, of the inquirer and bemailed to the following address:

SecretaryASME Boiler and Pressure Vessel CommitteeThree Park AvenueNew York, N.Y. 10016-5990

(b) Response.The Secretary of the ASME Boilerand Pressure Vessel Committee or of the appropriateSubcommittee shall acknowledge receipt of each prop-erly prepared inquiry and shall provide a written re-sponse to the inquirer upon completion of the requestedaction by the Code Committee.

APPENDIX B — NONMANDATORYWELDING AND BRAZING FORMS

B-100 FORMS

This Nonmandatory Appendix illustrates sample for-mats for Welding and Brazing Procedure Specifications,Procedure Qualification Records, and Performance Qual-ification.

B-101 Welding

Form QW-482 is a suggested format for WeldingProcedure Specifications (WPS); Form QW-483 is asuggested format for Procedure Qualification Records(PQR). These forms are for the shielded metal-arc(SMAW), submerged-arc (SAW), gas metal-arc(GMAW), and gas tungsten-arc (GTAW) welding pro-cesses, or a combination of these processes.

Forms for other welding processes may follow thegeneral format of Forms QW-482 and QW-483, asapplicable.

Form QW-484 is a suggested format for Welder /Welding Operator /Performance Qualification (WPQ) forgroove or fillet welds.

B-102 Brazing

Form QB-482 is a suggested format for BrazingProcedure Specifications (BPS); Form QB-483 is asuggested format for Procedure Qualifications Records(PQR). These forms are for torch brazing (TB), furnacebrazing (FB), induction brazing (IB, resistance brazing(RB), and dip brazing (DB) processes.

Forms for other welding processes may follow thegeneral format of Forms QW-482 and QW-483, asapplicable.

Form QB-484 is a suggested format for Brazer /Brazing Operator /Performance Qualification (BPQ).

231

QW-482 1998 SECTION IX

232

NONMANDATORY APPENDIX B QW-482

233


234

ASME B&PVC sec9$$$u55 05-17-99 06:30:34 pd: sec9 Rev 14.04

NONMANDATORY APPENDIX B QW-483

235

ASME B&PVC sec9$$$u55 05-17-99 06:30:34 pd: sec9 Rev 14.04


A99

SA

MP

L E

QW-484 SUGGESTED FORMAT FOR WELDER/WELDING OPERATOR

PERFORMANCE QUALIFICATIONS (WPQ)

(See QW-301, Section IX, ASME Boiler and Pressure Vessel Code)

Welder’s name Clock number Stamp no.

Welding process(es) used Type(Manual, semiautomatic, machine, automatic)

Identification of WPS followed by welder during welding of test coupon

Base material(s) welded Thickness

Filler metal specification (SFA) Class (QW-404)

Manual or Semiautomatic Variables for Each Process (QW-350) Actual Values Range Qualified

Backing (metal, weld metal, welded from both sides, flux, etc.) (QW-402)

ASME P-No. to ASME P-No. (QW-403)

⟨ ⟩ Plate ⟨ ⟩ Pipe (enter diameter, if pipe) (QW-403)

Base metal thickness — OFW (QW-403)

Filler metal F-No. (QW-404)

Filler metal product form [solid/cored/flux-cored — GTA/PAW (QW-404)]

Consumable insert for GTAW or PAW (QW-404)

Weld deposit thickness for each welding process (QW-404)

Welding position (1G, 5G, etc.) (QW-405)

Progression (uphill/downhill) (QW-405)

Backing gas for GTAW, PAW, or GMAW; fuel gas for OFW (QW-408)

GMAW transfer mode (QW-409)

GTAW welding current type/polarity (QW-409)

Automatic/Machine Welding Variables for the Process Used (QW-360) Actual Values Range Qualified

Direct/remote visual control

Automatic voltage control (GTAW)

Automatic joint tracking

Welding position (1G, 5G, etc.)

Consumable insert

Backing (metal, weld metal, welded from both sides, flux, etc.)

Multiple or single pass per side

Change from automatic to machine

Filler for EBW or LBW

Laser type

Drive type for FRW

Vacuum type for EBW

Guided Bend Test ResultsGuided Bend Tests Type ⟨ ⟩ QW-462.2 (Side) Results ⟨ ⟩ QW-462.3(a) (Trans. R & F) Type ⟨ ⟩ QW-462.3(b) (Long, R & F) Results

Visual examination results (QW-302.4)

Radiographic test results (QW-304 and QW-305)

(For alternative qualification of groove welds by radiography)

Fillet Weld — Fracture test Length and percent of defects in.

Macro test fusion Fillet leg size in. × in. Concavity/convexity in.

Welding test conducted by

Mechanical tests conducted by Laboratory test no.

We certify that the statements in this record are correct and that the test coupons were prepared, welded, and tested in accordance with the requirements

of Section IX of the ASME Code.

Organization

Date By

This form (E00008) may be obtained from the Order Dept., ASME, 22 Law Drive, Box 2300, Fairfield, NJ 07007-2300.

236

NONMANDATORY APPENDIX B QB-482

237

QB-483 1998 SECTION IX

238

NONMANDATORY APPENDIX B QB-483

239

QB-484 1998 SECTION IX

240

APPENDIX D — NONMANDATORYP-NUMBER LISTING

241

NONMANDATORY APPENDIX D

APPENDIX D — NONMANDATORY P-NUMBER LISTING

P- Grp. Spec. Type, Grade, P- Grp. Spec. Type, Grade,No. No. No. or UNS No. No. No. No. or UNS No.

Steel and Steel Alloys

1 1 SA-361 1 SA-53 Type E, Gr. A1 1 SA-53 Type E, Gr. B1 1 SA-53 Type F1 1 SA-53 Type S, Gr. A

1 1 SA-53 Type S, Gr. B1 1 SA-106 A1 1 SA-106 B1 1 SA-1341 1 SA-135 A

1 1 SA-135 B1 1 SA-178 A1 1 SA-178 C1 1 SA-179 . . .1 1 SA-181 Cl. 60

1 1 SA-1921 1 SA-210 A-11 1 SA-2141 1 SA-216 WCA1 1 SA-226

1 1 SA-234 WPB1 1 SA-266 11 1 SA-283 A1 1 SA-283 B1 1 SA-283 C

1 1 SA-283 D1 1 SA-285 A1 1 SA-285 B1 1 SA-285 C1 1 SA-333 1

1 1 SA-333 61 1 SA-334 11 1 SA-334 61 1 SA-350 LF11 1 SA-352 LCA

1 1 SA-352 LCB1 1 SA-369 FPA1 1 SA-369 FPB1 1 SA-372 A1 1 SA-414 A

1 1 SA-414 B1 1 SA-414 C1 1 SA-414 D1 1 SA-414 E1 1 SA-420 WPL61 1 SA-515 601 1 SA-515 65

1 1 SA-516 55

243

Steel and Steel Alloys (Cont’d)

1 1 SA-516 601 1 SA-516 651 1 SA-524 I1 1 SA-524 II

1 1 SA-556 A21 1 SA-556 B21 1 SA-557 A21 1 SA-557 B21 1 SA-562

1 1 SA-587 . . .1 1 SA-620 K000401 1 SA-660 WCA1 1 SA-662 A1 1 SA-662 B

1 1 SA-671 CA551 1 SA-671 CB601 1 SA-671 CB651 1 SA-671 CC601 1 SA-671 CC65

1 1 SA-671 CE551 1 SA-671 CE601 1 SA-672 A451 1 SA-672 A501 1 SA-672 A55

1 1 SA-672 B551 1 SA-672 B601 1 SA-672 B651 1 SA-672 C551 1 SA-672 C60

1 1 SA-672 C651 1 SA-672 E551 1 SA-672 E601 1 SA-675 451 1 SA-675 50

1 1 SA-675 551 1 SA-675 601 1 SA-675 651 1 SA-695 Type B, Gr. 351 1 SA-696 B

1 1 SA-727 . . .1 1 SA-765 I1 1 SA-836

1 1 SA/CSA Gr. 38WG40.21

1 1 SA/CSA Gr. 44WG40.21

98

1998 SECTION IX

APPENDIX D — NONMANDATORY P-NUMBER LISTING (CONT’D)



1 2 SA-1051 2 SA-106 C1 2 SA-178 D1 2 SA-181 Cl. 701 2 SA-210 C

1 2 SA-216 WCB1 2 SA-216 WCC1 2 SA-234 WPC1 2 SA-266 21 2 SA-266 3

1 2 SA-266 41 2 SA-2991 2 SA-350 LF21 2 SA-352 LCC1 2 SA-372 B

1 2 SA-414 F1 2 SA-414 G1 2 SA-4551 2 SA-487 Gr. 16, Cl. A1 2 SA-508 1

1 2 SA-508 1A1 2 SA-515 701 2 SA-516 701 2 SA-537 Cl. 11 2 SA-541 1

1 2 SA-541 1A1 2 SA-556 C21 2 SA-557 C21 2 SA-660 WCB1 2 SA-660 WCC

1 2 SA-662 C1 2 SA-671 CB701 2 SA-671 CC701 2 SA-671 CD701 2 SA-671 CK75

1 2 SA-672 B701 2 SA-672 C701 2 SA-672 D701 2 SA-672 N751 2 SA-675 70

1 2 SA-691 CMS-751 2 SA-691 CMSH-701 2 SA-695 Type B, Gr. 401 2 SA-696 C1 2 SA-737 B1 2 SA-738 A1 2 SA-765 II

244


1 3 SA-333 101 3 SA-537 Cl. 21 3 SA-537 Cl. 31 3 SA-671 CD801 3 SA-672 D801 3 SA-691 CMSH-80

1 3 SA-737 C1 3 SA-738 B1 3 SA-738 C

1 4 SA-724 A1 4 SA-724 B1 4 SA-724 C

3 1 SA-204 A3 1 SA-209 T13 1 SA-209 T1a3 1 SA-209 T1b3 1 SA-213 T2

3 1 SA-217 WC13 1 SA-234 WP13 1 SA-250 T13 1 SA-250 T1a3 1 SA-250 T1b

3 1 SA-250 T23 1 SA-335 P13 1 SA-335 P23 1 SA-335 P153 1 SA-352 LC1

3 1 SA-369 FP13 1 SA-369 FP23 1 SA-387 Gr. 2, Cl. 13 1 SA-426 CP13 1 SA-426 CP2

3 1 SA-426 CP153 1 SA-672 L653 1 SA-691 1⁄2CR3 1 SA-691 CM-65

3 2 SA-182 F13 2 SA-182 F23 2 SA-204 B3 2 SA-204 C3 2 SA-302 A

3 2 SA-336 F13 2 SA-387 Gr. 2, Cl. 2

3 2 SA-672 H753 2 SA-672 L70





3 2 SA-672 L753 2 SA-691 1⁄2CR, Cl. 23 2 SA-691 CM-703 2 SA-691 CM-75

3 3 SA-302 B3 3 SA-302 C3 3 SA-302 D3 3 SA-487 Gr. 2, Cl. A3 3 SA-487 Gr. 2, Cl. B3 3 SA-487 Gr. 4, Cl. A3 3 SA-508 2, Cl. 13 3 SA-508 2, Cl. 2

3 3 SA-508 3, Cl. 13 3 SA-508 3, Cl. 23 3 SA-508 4N, Cl. 33 3 SA-533 Type A, Cl. 13 3 SA-533 Type A, Cl. 2

3 3 SA-533 Type B, Cl. 13 3 SA-533 Type B, Cl. 23 3 SA-533 Type C, Cl. 13 3 SA-533 Type C, Cl. 23 3 SA-533 Type D, Cl. 1

3 3 SA-533 Type D, Cl. 23 3 SA-541 2, Cl. 13 3 SA-541 2, Cl. 23 3 SA-541 3, Cl. 13 3 SA-541 3, Cl. 2

3 3 SA-672 H803 3 SA-672 J803 3 SA-672 J90

4 1 SA-182 F11, Cl. 14 1 SA-182 F11, Cl. 24 1 SA-182 F11, Cl. 34 1 SA-182 F12, Cl. 14 1 SA-182 F12, Cl. 2

4 1 SA-199 T114 1 SA-202 A4 1 SA-202 B4 1 SA-213 T114 1 SA-213 T12

4 1 SA-217 WC44 1 SA-217 WC54 1 SA-217 WC64 1 SA-234 WP11, Cl. 14 1 SA-234 WP12, Cl. 1

4 1 SA-250 T11

245


98

A99

4 1 SA-335 P114 1 SA-335 P124 1 SA-336 F11, Cl. 24 1 SA-336 F11, Cl. 3

4 1 SA-336 F11, Cl. 14 1 SA-336 F124 1 SA-369 FP114 1 SA-369 FP124 1 SA-387 11, Cl. 1

4 1 SA-387 11, Cl. 24 1 SA-387 12, Cl. 14 1 SA-387 12, Cl. 24 1 SA-426 CP114 1 SA-426 CP12

4 1 SA-541 11, Cl. 44 1 SA-691 1CR4 1 SA-691 11⁄4CR4 1 SA-739 B11

4 2 SA-333 44 2 SA-423 14 2 SA-423 2

5A 1 SA-182 F215A 1 SA-182 F22, Cl. 15A 1 SA-182 F22, Cl. 35A 1 SA-199 T45A 1 SA-199 T21

5A 1 SA-199 T225A 1 SA-213 T215A 1 SA-213 T225A 1 SA-217 WC95A 1 SA-234 WP22, Cl. 1

5A 1 SA-250 T225A 1 SA-335 P215A 1 SA-335 P225A 1 SA-336 F21, Cl. 35A 1 SA-336 F21, Cl. 1

5A 1 SA-336 F22, Cl. 35A 1 SA-336 F22, Cl. 15A 1 SA-369 FP215A 1 SA-369 FP225A 1 SA-387 21, Cl. 1

5A 1 SA-387 21, Cl. 25A 1 SA-387 22, Cl. 15A 1 SA-387 22, Cl. 25A 1 SA-426 CP215A 1 SA-426 CP22

1998 SECTION IX




A99

5A 1 SA-691 21⁄4CR5A 1 SA-691 3CR5A 1 SA-739 B22

5B 1 SA-182 F55B 1 SA-182 F5a5B 1 SA-182 F95B 1 SA-199 T55B 1 SA-199 T9

5B 1 SA-213 T55B 1 SA-213 T5b5B 1 SA-213 T5c5B 1 SA-213 T95B 1 SA-217 C5

5B 1 SA-217 C125B 1 SA-234 WP55B 1 SA-234 WP95B 1 SA-335 P55B 1 SA-335 P5b

5B 1 SA-335 P5c5B 1 SA-335 P95B 1 SA-336 F55B 1 SA-336 F5A5B 1 SA-336 F9

5B 1 SA-369 FP55B 1 SA-369 FP95B 1 SA-387 5, Cl. 15B 1 SA-387 5, Cl. 25B 1 SA-426 CP5

5B 1 SA-426 CP5b5B 1 SA-426 CP95B 1 SA-691 5CR

5B 2 SA-182 F915B 2 SA-199 T915B 2 SA-213 T915B 2 SA-234 WP915B 2 SA-335 P91

5B 2 SA-336 F915B 2 SA-369 FP915B 2 SA-387 Gr. 91, Cl. 2

5C 1 SA-182 F3V5C 1 SA-182 F22V5C 1 SA-336 F3V5C 1 SA-336 F22V5C 1 SA-487 Gr. 8 Cl. A5C 1 SA-508 3V5C 1 SA-508 22, Cl. 35C 1 SA-541 3V5C 1 SA-541 22V5C 1 SA-541 22, Cl. 3

246


5C 1 SA-542 A, Cl. 45C 1 SA-542 A, Cl. 4a5C 1 SA-542 B, Cl. 45C 1 SA-542 B, Cl. 4a5C 1 SA-542 C, Cl. 4

5C 1 SA-542 C, Cl. 4a5C 1 SA-542 D, Cl. 4a5C 1 SA-832 21V5C 1 SA-832 22V

5C 3 SA-542 A, Cl. 35C 3 SA-542 B, Cl. 35C 3 SA-542 C, Cl. 3

5C 4 SA-487 Gr. 8 Cl. B5C 4 SA-487 Gr. 8 Cl. C5C 4 SA-541 22, Cl. 45C 4 SA-542 A, Cl. 15C 4 SA-542 B, Cl. 1

5C 4 SA-542 C, Cl. 1

5C 5 SA-541 22, Cl. 55C 5 SA-542 A, Cl. 25C 5 SA-542 B, Cl. 25C 5 SA-542 C, Cl. 2

6 1 SA-182 F6a, Cl. 16 1 SA-240 4106 1 SA-268 TP4106 1 SA-479 4036 1 SA-479 410

6 2 SA-182 F4296 2 SA-240 4296 2 SA-268 TP429

6 3 SA-182 F6a, Cl. 26 3 SA-182 F6b6 3 SA-217 CA156 3 SA-336 F66 3 SA-426 CPCA15

6 3 SA-487 CA15 Cl. B6 3 SA-487 CA15 Cl. C6 3 SA-487 CA15 Cl. D6 3 SA-487 CA15M Cl. A

6 4 SA-182 F6NM6 4 SA-240 S415006 4 SA-268 S415006 4 SA-352 CA6NM6 4 SA-479 414

6 4 SA-479 S415006 4 SA-487 CA6NM Cl. A





6 4 SA-487 CA6NM Cl. B6 4 SA-731 S415006 4 SA-815 S41500

7 1 SA-240 Type 4057 1 SA-240 Type 4097 1 SA-240 Type 410S7 1 SA-268 S408007 1 SA-268 TP405

7 1 SA-268 TP4097 1 SA-268 TP430Ti7 1 SA-479 405

7 2 SA-182 F4307 2 SA-240 S444007 2 SA-240 Type 4307 2 SA-240 Type 4397 2 SA-268 18Cr–2Mo

7 2 SA-268 TP4307 2 SA-268 TP4397 2 SA-479 4307 2 SA-479 4397 2 SA-479 S44400

7 2 SA-731 18Cr-2Mo7 2 SA-731 TP4397 2 SA-803 TP439

8 1 SA-182 S306008 1 SA-182 F3048 1 SA-182 F304H8 1 SA-182 F304L8 1 SA-182 F304LN

8 1 SA-182 F304N8 1 SA-182 F3168 1 SA-182 F316H8 1 SA-182 F316L8 1 SA-182 F316LN

8 1 SA-182 F3168 1 SA-182 F3178 1 SA-182 F317L8 1 SA-182 F3218 1 SA-182 F321H

8 1 SA-182 F3478 1 SA-182 F347H8 1 SA-182 F3488 1 SA-182 F348H

8 1 SA-213 TP304

247


A99

8 1 SA-213 TP304H8 1 SA-213 TP304L8 1 SA-213 TP304LN8 1 SA-213 TP304N

8 1 SA-213 TP3168 1 SA-213 TP316H8 1 SA-213 TP316L8 1 SA-213 TP316LN8 1 SA-213 TP316N

8 1 SA-213 TP3218 1 SA-213 TP321H8 1 SA-213 TP3478 1 SA-213 TP347H8 1 SA-213 TP348

8 1 SA-213 TP348H8 1 SA-213 XM-158 1 SA-240 S305008 1 SA-240 S306008 1 SA-240 S317538 1 SA-240 Type 302

8 1 SA-240 Type 3048 1 SA-240 Type 304H8 1 SA-240 Type 304L8 1 SA-240 Type 304LN8 1 SA-240 Type 304N

8 1 SA-240 Type 3168 1 SA-240 Type 316Cb8 1 SA-240 Type 316H8 1 SA-240 Type 316L8 1 SA-240 Type 316LN

8 1 SA-240 Type 316N8 1 SA-240 Type 316Ti8 1 SA-240 Type 3178 1 SA-240 Type 317L8 1 SA-240 Type 321

8 1 SA-240 Type 321H8 1 SA-240 Type 3478 1 SA-240 Type 347H8 1 SA-240 Type 3488 1 SA-240 Type 348H

8 1 SA-240 Type XM-158 1 SA-240 Type XM-218 1 SA-249 TP3048 1 SA-249 TP304H8 1 SA-249 TP304L

8 1 SA-249 TP304LN

1998 SECTION IX




8 1 SA-249 TP304N8 1 SA-249 TP3168 1 SA-249 TP316H8 1 SA-249 TP316L

8 1 SA-249 TP316LN8 1 SA-249 TP316N8 1 SA-249 TP3178 1 SA-249 TP317L8 1 SA-249 TP3218 1 SA-249 TP321H

8 1 SA-249 TP3478 1 SA-249 TP347H8 1 SA-249 TP3488 1 SA-249 TP348H8 1 SA-249 TP XM-15

8 1 SA-312 S306008 1 SA-312 TP3048 1 SA-312 TP304H8 1 SA-312 TP304L8 1 SA-312 TP304LN

8 1 SA-312 TP304N8 1 SA-312 TP3168 1 SA-312 TP316H8 1 SA-312 TP316L8 1 SA-312 TP316LN

8 1 SA-312 TP316N8 1 SA-312 TP3178 1 SA-312 TP317L8 1 SA-312 TP3218 1 SA-312 TP321H

8 1 SA-312 TP3478 1 SA-312 TP347H8 1 SA-312 TP3488 1 SA-312 TP348H8 1 SA-312 TP XM-15

8 1 SA-336 F3048 1 SA-336 F304H8 1 SA-336 F304L8 1 SA-336 F304LN8 1 SA-336 F304N

8 1 SA-336 F3168 1 SA-336 F316H8 1 SA-336 F316L8 1 SA-336 F316LN8 1 SA-336 F316N

8 1 SA-336 F321

248


8 1 SA-336 F321H8 1 SA-336 F3478 1 SA-336 F347H8 1 SA-336 F348

8 1 SA-336 F348H8 1 SA-351 CF38 1 SA-351 CF3A8 1 SA-351 CF3M8 1 SA-351 CF8

8 1 SA-351 CF8A8 1 SA-351 CF8C8 1 SA-351 CF8M8 1 SA-351 CF108 1 SA-351 CF10M

8 1 SA-351 CG8M8 1 SA-358 3048 1 SA-358 304H8 1 SA-358 304L8 1 SA-358 304LN

8 1 SA-358 304N8 1 SA-358 3168 1 SA-358 316H8 1 SA-358 316L8 1 SA-358 316LN

8 1 SA-358 316N8 1 SA-358 3218 1 SA-358 3478 1 SA-358 3488 1 SA-376 16-8-2H

8 1 SA-376 TP3048 1 SA-376 TP304H8 1 SA-376 TP304LN8 1 SA-376 TP304N8 1 SA-376 TP316

8 1 SA-376 TP316H8 1 SA-376 TP316LN8 1 SA-376 TP316N8 1 SA-376 TP3218 1 SA-376 TP321H

8 1 SA-376 TP3478 1 SA-376 TP347H8 1 SA-376 TP3488 1 SA-376 16-8-2H8 1 SA-403 WP304

8 1 SA-403 WP304H8 1 SA-403 WP304L





8 1 SA-403 WP304LN8 1 SA-403 WP304N8 1 SA-403 WP316

8 1 SA-403 WP316H8 1 SA-403 WP316L8 1 SA-403 WP316LN8 1 SA-403 WP316N8 1 SA-403 WP317

8 1 SA-403 WP317L8 1 SA-403 WP3218 1 SA-403 WP321H8 1 SA-403 WP3478 1 SA-403 WP347H

8 1 SA-403 WP3488 1 SA-403 WP348H8 1 SA-409 TP3048 1 SA-409 TP304L8 1 SA-409 TP316

8 1 SA-409 TP316L8 1 SA-409 TP3178 1 SA-409 TP3218 1 SA-409 TP3478 1 SA-409 TP348

8 1 SA-430 FP3048 1 SA-430 FP304H8 1 SA-430 FP304N8 1 SA-430 FP3168 1 SA-430 FP316H

8 1 SA-430 FP316N8 1 SA-430 FP3218 1 SA-430 FP321H8 1 SA-430 FP3478 1 SA-430 FP347H

8 1 SA-430 FP16-8-2H8 1 SA-451 CPF38 1 SA-451 CPF3A8 1 SA-451 CPF3M8 1 SA-451 CPF8

8 1 SA-451 CPF8A8 1 SA-451 CPF8C8 1 SA-451 CPF8M8 1 SA-452 TP304H8 1 SA-452 TP316H

8 1 SA-452 TP347H8 1 SA-479 3028 1 SA-479 304

249


8 1 SA-479 304H8 1 SA-479 304L

8 1 SA-479 304LN8 1 SA-479 304N8 1 SA-479 3168 1 SA-479 316Cb8 1 SA-479 316H

8 1 SA-479 316L8 1 SA-479 316LN8 1 SA-479 316N8 1 SA-479 316Ti8 1 SA-479 321

8 1 SA-479 321H8 1 SA-479 3478 1 SA-479 347H8 1 SA-479 3488 1 SA-479 348H

8 1 SA-479 S306008 1 SA-666 3028 1 SA-666 3048 1 SA-666 304L8 1 SA-666 304LN

8 1 SA-666 304N8 1 SA-666 3168 1 SA-666 316L8 1 SA-666 316N8 1 SA-688 TP304

8 1 SA-688 TP304L8 1 SA-688 TP304LN8 1 SA-688 TP304N8 1 SA-688 TP3168 1 SA-688 TP316L

8 1 SA-688 TP316LN8 1 SA-688 TP316N8 1 SA-813 TP3048 1 SA-813 TP304H8 1 SA-813 TP304L

8 1 SA-813 TP304LN8 1 SA-813 TP304N8 1 SA-813 TP3168 1 SA-813 TP316H8 1 SA-813 TP316L

8 1 SA-813 TP316LN8 1 SA-813 TP316N8 1 SA-813 TP3178 1 SA-813 TP317L

1998 SECTION IX




8 1 SA-813 TP321

8 1 SA-813 TP321H8 1 SA-813 TP3478 1 SA-813 TP347H8 1 SA-813 TP3488 1 SA-813 TP348H

8 1 SA-813 TPXM-158 1 SA-814 TP3048 1 SA-814 TP304H8 1 SA-814 TP304L8 1 SA-814 TP304LN

8 1 SA-814 TP304N8 1 SA-814 TP3168 1 SA-814 TP316H8 1 SA-814 TP316L8 1 SA-814 TP316LN

8 1 SA-814 TP316N8 1 SA-814 TP3178 1 SA-814 TP317L8 1 SA-814 TP3218 1 SA-814 TP321H

8 1 SA-814 TP3478 1 SA-814 TP347H8 1 SA-814 TP3488 1 SA-814 TP348H8 1 SA-814 TPXM-15

8 2 SA-182 F108 2 SA-182 F458 2 SA-182 F3108 2 SA-213 S308158 2 SA-213 TP309Cb

8 2 SA-213 TP309H8 2 SA-213 TP309S8 2 SA-213 TP310Cb8 2 SA-213 TP310S8 2 SA-213 TP309HCb

8 2 SA-213 TP310H8 2 SA-213 TP310MoLN8 2 SA-213 TP310HCb8 2 SA-240 S308158 2 SA-240 Type 309Cb8 2 SA-240 Type 309H

8 2 SA-240 Type 309HCb8 2 SA-240 Type 309S8 2 SA-240 Type 310Cb8 2 SA-240 Type 310HCb

250


8 2 SA-240 Type 310MoLN8 2 SA-240 Type 310S

8 2 SA-249 S308158 2 SA-249 TP309Cb8 2 SA-249 TP309H8 2 SA-249 TP309HCb8 2 SA-249 TP309S

8 2 SA-249 TP310Cb8 2 SA-249 TP310H8 2 SA-249 TP310S8 2 SA-249 TP310MoLN8 2 SA-312 S30815

8 2 SA-312 TP309Cb8 2 SA-312 TP309H8 2 SA-312 TP309HCb8 2 SA-312 TP309S8 2 SA-312 TP310Cb

8 2 SA-312 TP310H8 2 SA-312 TP310HCb8 2 SA-312 TP310S8 2 SA-312 TP310MoLN8 2 SA-336 F3108 2 SA-351 CH8

8 2 SA-351 CH208 2 SA-351 CK208 2 SA-358 309Cb8 2 SA-358 309S

8 2 SA-358 310Cb8 2 SA-358 310S8 2 SA-358 S308158 2 SA-403 WP309

8 2 SA-403 WP3108 2 SA-409 S308158 2 SA-409 TP309Cb8 2 SA-409 TP309S8 2 SA-409 TP310Cb

8 2 SA-409 TP310S8 2 SA-451 CPH88 2 SA-451 CPH208 2 SA-451 CPK208 2 SA-479 309Cb

8 2 SA-479 309S8 2 SA-479 310Cb8 2 SA-479 310S8 2 SA-479 S308158 2 SA-813 S30815





8 2 SA-813 TP309Cb8 2 SA-813 TP309S8 2 SA-813 TP310Cb8 2 SA-813 TP310S8 2 SA-814 S30815

8 2 SA-814 TP309Cb8 2 SA-814 TP309S8 2 SA-814 TP310Cb8 2 SA-814 TP310S

8 3 SA-182 FXM-118 3 SA-182 FXM-198 3 SA-213 TP2018 3 SA-213 TP2028 3 SA-213 XM-198 3 SA-240 S20100

8 3 SA-240 S218008 3 SA-240 S201008 3 SA-240 Type 2028 3 SA-240 S204008 3 SA-240 Type XM-178 3 SA-240 Type XM-17

8 3 SA-240 Type XM-188 3 SA-240 Type XM-188 3 SA-240 Type XM-198 3 SA-240 Type XM-198 3 SA-240 Type XM-29

8 3 SA-249 TP2018 3 SA-249 TP2028 3 SA-249 TPXM-198 3 SA-249 TPXM-298 3 SA-312 TPXM-11

8 3 SA-312 TPXM-198 3 SA-312 TPXM-298 3 SA-336 FXM-118 3 SA-336 FXM-198 3 SA-351 CG6MMN

8 3 SA-358 XM-198 3 SA-358 XM-298 3 SA-403 WPXM-198 3 SA-479 S218008 3 SA-479 XM-11

8 3 SA-479 XM-178 3 SA-479 XM-188 3 SA-479 XM-198 3 SA-479 XM-298 3 SA-666 201

251


8 3 SA-666 XM-118 3 SA-688 XM-298 3 SA-813 TPXM-118 3 SA-813 TPXM-198 3 SA-813 TPXM-29

8 3 SA-814 TPXM-118 3 SA-814 TPXM-198 3 SA-814 TPXM-29

8 4 SA-182 F448 4 SA-213 S018158 4 SA-213 S317258 4 SA-213 S317268 4 SA-240 S31254

8 4 SA-240 S317258 4 SA-240 S317268 4 SA-249 S312548 4 SA-249 S317258 4 SA-249 S31726

8 4 SA-312 S312548 4 SA-312 S317258 4 SA-312 S317268 4 SA-336 F468 4 SA-351 J932548 4 SA-358 S31254



8 4 SA-813 S312548 4 SA-814 S31254

9A 1 SA-182 FR9A 1 SA-203 A9A 1 SA-203 B9A 1 SA-234 WPR9A 1 SA-333 7

9A 1 SA-333 99A 1 SA-334 79A 1 SA-334 99A 1 SA-350 LF5, Cl. 19A 1 SA-350 LF5, Cl. 2

1998 SECTION IX

98 APPENDIX D — NONMANDATORY P-NUMBER LISTING (CONT’D)



9A 1 SA-350 LF99A 1 SA-352 LC29A 1 SA-420 WPL9

9B 1 SA-203 D9B 1 SA-203 E9B 1 SA-203 F9B 1 SA-333 39B 1 SA-334 3

9B 1 SA-350 LF3, Cl. 29B 1 SA-352 LC39B 1 SA-420 WPL39B 1 SA-765 III

9C 1 SA-352 LC4

10A 1 SA-225 C10A 1 SA-225 D10A 1 SA-487 Gr. 1, Cl. A10A 1 SA-487 Gr. 1, Cl. B

10B 1 SA-213 T17

10C 1 SA-61210C 1 SA-841

10H 1 SA-182 F5010H 1 SA-182 F5110H 1 SA-240 S3120010H 1 SA-240 S3126010H 1 SA-240 S3180310H 1 SA-240 S32550

10H 1 SA-240 S3295010H 1 SA-240 Type 32910H 1 SA-351 CD4MCu10H 1 SA-351 CE8MN10H 1 SA-479 C32550

10H 1 SA-789 S3120010H 1 SA-789 S3126010H 1 SA-789 S3150010H 1 SA-789 S3180310H 1 SA-789 S3230410H 1 SA-789 S32550


10H 1 SA-790 S31803

252



10I 1 SA-182 FXM-27Cb10I 1 SA-240 S4463510I 1 SA-240 Type XM-2710I 1 SA-240 Type XM-3310I 1 SA-268 25-4-4

10I 1 SA-268 TP446-110I 1 SA-268 TP446-210I 1 SA-268 TPXM-2710I 1 SA-268 TPXM-3310I 1 SA-336 FXM-27Cb

10I 1 SA-479 XM-2710I 1 SA-731 TPXM-2710I 1 SA-731 TPXM-33

10J 1 SA-240 S4470010J 1 SA-268 S4470010J 1 SA-268 S4473510J 1 SA-479 S4470010J 1 SA-731 S44700

10K 1 SA-240 S4466010K 1 SA-240 S4480010K 1 SA-268 S4466010K 1 SA-268 S4480010K 1 SA-479 S44800

10K 1 SA-731 S4466010K 1 SA-731 S4480010K 1 SA-803 S44660

11A 1 SA-333 811A 1 SA-334 811A 1 SA-35311A 1 SA-420 WPL811A 1 SA-522 Type I

11A 1 SA-522 Type II11A 1 SA-553 Type I11A 1 SA-553 Type II11A 2 SA-645

11A 3 SA-487 Gr. 4, Cl. B11A 3 SA-487 Gr. 4, Cl. E

11A 4 SA-533 Type A, Cl. 311A 4 SA-533 Type B, Cl. 3


98APPENDIX D — NONMANDATORY P-NUMBER LISTING (CONT’D)



11A 4 SA-533 Type C, Cl. 311A 4 SA-533 Type D, Cl. 311A 4 SA-672 J100

11A 5 SA-352 LC2-111A 5 SA-508 4N, Cl. 111A 5 SA-508 4N, Cl. 211A 5 SA-508 5, Cl. 111A 5 SA-508 5, Cl. 2

11A 5 SA-543 B Cl. 111A 5 SA-543 B Cl. 311A 5 SA-543 C Cl. 111A 5 SA-543 C Cl. 3

11B 1 SA-517 A11B 1 SA-592 A

11B 2 SA-517 E11B 2 SA-592 E

11B 3 SA-517 F11B 3 SA-592 F

11B 4 SA-517 B

11B 6 SA-517 J

11B 8 SA-517 P

11B 10 SA-543 B Cl. 211B 10 SA-543 C Cl. 2

Aluminum and Aluminum-Base Alloys

21 SB-209 A9106021 SB-209 A9110021 SB-209 A9300321 SB-210 A9106021 SB-210 A93003


21 SB-241 A9106021 SB-241 A9110021 SB-241 A9300321 SB-247 A93003

22 SB-209 A9300422 SB-209 A9505222 SB-209 A95154

253

Aluminum and Aluminum-Base Alloys (Cont’d)

22 SB-209 A9525422 SB-209 A95454


22 SB-234 A9505222 SB-234 A9545422 SB-241 A9505222 SB-241 A95454





Copper and Copper-Base Alloys

31 SB-42 C1020031 SB-42 C1200031 SB-42 C1220031 SB-75 C1020031 SB-75 C12000


31 SB-111 C1420031 SB-111 C1920031 SB-152 C10200

1998 SECTION IX

98 APPENDIX D — NONMANDATORY P-NUMBER LISTING (CONT’D)


Copper and Copper-Base Alloys (Cont’d)

31 SB-152 C10400

31 SB-152 C1050031 SB-152 C1070031 SB-152 C1100031 SB-152 C1220031 SB-152 C1230031 SB-152 C12500

31 SB-152 C1420031 SB-187 C1020031 SB-187 C1100031 SB-359 C1020031 SB-359 C1200031 SB-359 C1220031 SB-359 C14200


31 SB-395 C1920031 SB-543 C1220031 SB-543 C19400


32 SB-111 C4450032 SB-111 C6870032 SB-135 C2300032 SB-171 C3650032 SB-171 C4430032 SB-171 C4440032 SB-171 C44500

32 SB-171 C4640032 SB-171 C4650032 SB-359 C23000

32 SB-359 C4430032 SB-359 C4440032 SB-359 C4450032 SB-359 C6870032 SB-395 C2300032 SB-395 C4430032 SB-395 C4440032 SB-395 C4450032 SB-395 C6870032 SB-543 C23000

254


32 SB-543 C4430032 SB-543 C4440032 SB-543 C4450032 SB-543 C68700







34 SB-543 C71640








Nickel and Nickel-Base Alloys

41 SB-160 N0220041 SB-160 N0220141 SB-161 N0220041 SB-161 N0220141 SB-162 N02200


42 SB-127 N0440042 SB-163 N0440042 SB-164 N0440042 SB-164 N0440542 SB-165 NO440042 SB-366 N0440042 SB-564 N04400


43 SB-167 N0669043 SB-168 N0660043 SB-168 N0669043 SB-366 N0600243 SB-366 N0660043 SB-366 N0662543 SB-435 N0600243 SB-443 N06625


43 SB-564 N0662543 SB-564 N0669043 SB-572 N0600243 SB-619 N0600243 SB-622 N0600243 SB-626 N06002

255

Nickel and Nickel-Base Alloys (Cont’d)

A99

43 SB-704 N0662543 SB-705 N06625

44 SB-333 N1000144 SB-333 N1066544 SB-335 N1000144 SB-335 N1066544 SB-366 N0602244 SB-366 N0605944 SB-366 N06645

44 SB-366 N1000144 SB-366 N1000344 SB-366 N1027644 SB-366 N1066544 SB-434 N1000344 SA-494 N26022

44 SB-564 N0602244 SB-564 N0605944 SB-564 N1027644 SB-573 N1000344 SB-574 N0602244 SB-574 N0605944 SB-574 N0645544 SB-574 N10276

44 SB-575 N0602244 SB-575 N0605944 SB-575 N0645544 SB-575 N1027644 SB-619 N0602244 SB-619 N0605944 SB-619 N06455



44 SB-626 N1000144 SB-626 N1027644 SB-626 N10665

1998 SECTION IX




98

A99

45 SB-163 N0880045 SB-163 N0881045 SB-163 N0881145 SB-163 N0882545 SA-351 CN3MN45 SA-351 N0800745 SA-351 N0815145 SA-743 CN3MN45 SA-744 CN3MN45 SB-366 N0600745 SB-366 N0603045 SB-366 N0698545 SB-366 N0802045 SB-366 N0880045 SB-366 N0892545 SB-407 N08800



45 SB-425 N0882545 SB-435 R3055645 SB-462 N0802045 SB-463 N0802045 SB-463 N08024



45 SB-515 N0880045 SB-515 N0881045 SB-515 N0881145 SB-564 N0880045 SB-564 N0881045 SB-564 N0881145 SB-572 R30556

256




45 SB-619 N0603045 SB-619 N0697545 SB-619 N0698545 SB-619 N0832045 SB-619 R30556


45 SB-622 N0698545 SB-622 N0832045 SB-622 R3055645 SB-625 N0890445 SB-625 N08925


45 SB-626 R3055645 SB-649 N0890445 SB-649 N0892545 SB-668 N0802845 SB-672 N08700



45 SB-688 N08366





45 SB-688 N0836745 SB-690 N0836645 SB-690 N0836745 SB-691 N08366




Titanium and Titanium-Base Alloys

51 SB-265 R5025051 SB-265 R5040051 SB-265 R5225051 SB-265 R5225251 SB-265 R5240051 SB-265 R5240251 SB-337 R5025051 SB-337 R50400


51 SB-348 R52400

257

Titanium and Titanium-Base Alloys (Cont’d)

98

A99


52 SB-265 R5055052 SB-265 R5340052 SB-337 R5055052 SB-337 R5340052 SB-338 R5055052 SB-338 R53400

52 SB-348 R5055052 SB-348 R5340052 SB-363 R5055052 SB-363 R5340052 SB-367 R50550

52 SB-381 R5055052 SB-381 R53400


53 SB-381 R56320

Zirconium and Zirconium-Base Alloys



Documents

Asme9 Appendices