ASME (ANSI) Standard A13.1-2007

The ASME (ANSI) Standard for pipe identification is a widely used guideline in determining pipe identification requirements. The purpose of the standard is to “assist in identification of hazardous materials conveyed in piping systems and their hazards when released into the environment.” “Pipes are defined as conduits for the transport of gases, liquids, semi-liquids or fine particulate dust.”

Brady & HANPLY Pipe Marking Systems Meet the ASME (ANSI) A13.1-2007 StandardThe Pipe Marking System instantly tells you all you need to know… pipe contents…direction of flow…whether hazardous or safe.

Brady & HANPLY Pipe Marking Systems Meet theASME (ANSI) Size RecommendationsThe A13.1-2007 standard also makes recommendations as to the size of letter height and length of color field for various pipe diameters. These recommendations are shown in the table.

Brady & HANPLY Pipe Marking Systems Meet ASME (ANSI) Color RecommendationsUnmarked pipes mean danger – to both life and property. Numerous injuries have occurred through ignorance of pipe contents, particularly when outside agencies are called in under emergency conditions.

Outside Diameter of Pipe or Covering Size of Letters

3⁄4” to 11⁄4” 1⁄2”

11⁄2” to 2” 3⁄4”

21⁄2” to 6” 11⁄4”

8” to 10” 21⁄2”

Over 10” 31⁄2”

NOTE: For pipes less than 3/4” in diameter, a permanently legible tag is recommended.

Brady & HANPLY Pipe Marking Systems Meet the ASME (ANSI) A13.1-2007 Standard

Visibility“Markers shall be located so that they are readily visible to plant personnel from the point of normal approach.” Brady & HANPLY Pipe Markers instantly tell you all you need to know about pipe contents, direction of flow and whether hazardous or safe.

Recommendations for Marker Placement

Pipes shall be marked...

ASME (ANSI) Standard A13.1-2007

!

?

Icon Glossary S-25 04/11/2006

SHOP ONLINE - Same day shipping - Fast delivery on stock & custom - Competitive pricing - Large stocking warehouse - Technical documents & product videos online

Pipe

Mar

kers

TABLE OF CONTENTS

4-5 HANPLY Pipe Markers

6 Arrow Tape & Pipe Banding Tape

7 IIAR Refrigeration Markers

8-9 Snap-On Plastic Coiled Pipe Markers

10 Stock Brass Valve Tags

11 Custom Brass Valve Tags

12 Aluminum Tags (Stock & Custom)

13 Stainless Steel Tags (Stock & Custom)

14 Plastic Valve Tags & Equipment Plates

15 Tag Accessories

16-17 Engraving Systems

18-19 Label Printers

Since 1925 Hansen Company has been providing excellent customer service and superior identification products. We are a manufacturer and distributor of some of the most well known names in the ID business. We pride ourselves in long term relationships with our customers and our factories. Our close relationships allow us to perform when others simply can not. Give us a call, stop by one of our two locations, or check us out online to find out why Hansen Company is among the leaders in identification solutions.

Buy it stock from us.or...Buy a machine to make it yourself.

Pipe Markers

HANPLY Pipe Markers

Outside Letter OrderDiameter Height Style Description Style*

8” or greater 31⁄2” Style C: One 4” x 24” marker per card C

21⁄2” to 77⁄8” 13⁄4” Style B: One 2” x 14” marker per card B

3⁄4” to 23⁄8” 3⁄4” Style A: Four 1” x 7” markers per card A

less than 3⁄4” 1⁄2” Style T: Three 2” x 3” markers w/ arrows T

Size Chart

• HANPLY pipe markers are manufactured on fade-resistant, outdoor-grade vinyl with durable, indoor/outdoor adhesive.

• Adheres well to pipe and insulation with only limited surface preparation.• Stock Legends in Blue Meet ASME (ANSI) 2007 standards when used with arrows.• Stock Legends in Black Meet ASME (ANSI) 1996 standards when used with arrows.• Complies with the ANSI A13.1 “Scheme for the Identification of Piping Systems” regarding color, label size and letter height when accompanied with arrows.• Made in the USA• Large inventory means orders ship same day

Don’t see a legend you need? We will gladly match any stock legend from any manufacture. Just let us know the legend and we will add it to your order at stock pricing.

!

?


Customize ItDon’t see a legend in the list? Don’t see a particular size or color you need? We can make it custom. Our custom

markers are sold factory direct! Call, fax or email a list for a quote and delivery estimate.

4

Hanply Pipe Marker Technical Specifications Face stock: 3.2 mil Calendared vinyl filmAdhesive: 1.0 mil clear acrylic permanent solvent pressure-sensitive adhesiveAdhesion to Polypropylene (PSTC-101)15 Minute Dwell (Avg) 60oz/in (65 N/100mm)Ultimate Dwell (72 Hrs.) (Avg) 69 oz/in (75 N/100mm)Outdoor Durability: 8-10 yearsMinimum application temp: 0° F (-18° C)Service Temp Range: -40° F to +180° F (-40° C to 82° C)Shelf life: 1 year

!

?


Print on demandMake your own Pipe Markers onsite and on time with our 10 year outdoor label printers. Portable and benchtop units available. See

Pages 18-19 for more info.

800.782.1235

5

HANPLY Pipe Markers

Pipe

Mar

kers

Background Catalog Legend Color No.



*Legends listed in Blue meet ANSI 2007 Standards

ARROWS ---> Blue PS098 –*ARROWS ---> Brown PS093 –*ARROWS ---> Green PS096 –*ARROWS ---> Orange PS095 –*ARROWS ---> Red PS097 –*ARROWS ---> White PS094 –*ARROWS ---> Yellow PS099 –*ACID Yellow PS231 –*ACID Orange PS268 –*ACID VENT Yellow PS232 –*ACID VENT Orange PS269 –*ACID WASTE Yellow PS233 –*ACID WASTE Orange PS270 –*AIR Yellow PS101 –*AIR Blue PS102 –*AIR Green PS103 –*AIR RETURN Blue PS234 –*AIR SUPPLY Blue PS104 –*ALCOHOL Yellow PS237 –*AMMONIA Yellow PS105 –*AMMONIA Orange PS271 –*ARGON Green PS106 –*ARGON Orange PS272 –*ASBESTOS FREE Blue PS107 –*ASBESTOS FREE INSULATION Blue PS108 –*BOILER FEED Green PS242 –*CARBON DIOXIDE Yellow PS202 –*CARBON DIOXIDE Orange PS274 –*CHEMICAL FEED Yellow PS247 –*CHILLED WATER Green PS111 –*CHILLED WATER RETURN Green PS112 –*CHILLED WATER SUPPLY Green PS113 –*CHLORINE Yellow PS249 –*CHLORINE Orange PS275 –*CITY WATER Green PS114 –*COLD WATER Green PS115 –*COMPRESSED AIR Yellow PS116 –*COMPRESSED AIR Green PS117 –*COMPRESSED AIR Blue PS118 –*CONDENSATE Yellow PS119 –*CONDENSATE Green PS276 –*CONDENSATE DRAIN Yellow PS120 –*CONDENSATE DRAIN Green PS121 –*CONDENSATE PUMP DISCH. Yellow PS260 –*CONDENSATE RETURN Yellow PS122 –*CONDENSATE RETURN Green PS277 –*CONDENSATE SUPPLY Yellow PS263 –*CONDENSATE SUPPLY Green PS278 –*CONDENSER WATER Green PS123 –*CONDENSER WATER RETURN Green PS124 –*CONDENSER WATER SUPPLY Green PS125 –*COOLING WATER Green PS126 –* COOLING WATER RETURN Green PS127 –*COOLING WATER SUPPLY Green PS227 –*CRUDE OIL Yellow PS264 –*DEIONIZED WATER Green PS128 –*DEIONIZED WATER RETURN Green PS201 –*DEIONIZED WATER SUPPLY Green PS206 –*DIGESTED SLUDGE Yellow PS265 –*DISCHARGE Yellow PS267 –*DOMESTIC COLD WATER Green PS129 –*DOM. COLD WATER SUPPLY Green PS130 –*DOM. COLD WATER RETURN Green PS279 –*DOMESTIC HOT WATER Yellow PS131 –*DOMESTIC HOT WATER Green PS280 –*DOM. HOT WATER RETURN Yellow PS132 –*DOM. HOT WATER RETURN Green PS281 –*DOM. HOT WATER SUPPLY Yellow PS133 –*DOM. HOT WATER SUPPLY Green PS282 –*

DRAIN Green PS134 –*DRAIN Yellow PS253 –*EXHAUST Yellow PS213 –*EXHAUST Blue PS283 –*EXHAUST AIR Blue PS222 –*FILTERED WATER Green PS225 –*FIRE AUTO SPRINKLERS Red PS135 –*FIRE PROTECTION WATER Red PS136 –*FUEL OIL Yellow PS137 –*FUEL OIL RETURN Yellow PS224 –*FUEL OIL SUPPLY Yellow PS207 –*FUEL OIL VENT Yellow PS208 –*GAS Yellow PS138 –*GLYCOL Yellow PS139 –*GLYCOL Orange PS284 –*GLYCOL RETURN Yellow PS140 –*GLYCOL RETURN Orange PS285 –*GLYCOL SUPPLY Yellow PS141 –*GLYCOL SUPPLY Orange PS286 –*HEATING RETURN Yellow PS142 –*HEATING RETURN Green PS287 –*HEATING SUPPLY Yellow PS143 –*HEATING SUPPLY Green PS288 –*HEATING WATER Yellow PS144 –*HEATING WATER Green PS289 –*HEATING WATER RETURN Yellow PS145 –*HEATING WATER RETURN Green PS290 –*HEATING WATER SUPPLY Yellow PS146 –*HEATING WATER SUPPLY Green PS291 –*HIGH PRESSURE AIR Yellow PS292 –*HIGH PRESSURE AIR Blue PS293 –*HIGH PRESS. CONDENSATE Yellow PS336 –* HIGH PRESS. CONDENSATE Green PS294 –*HIGH PRESSURE GAS Yellow PS295 –*HIGH PRESS. STEAM Yellow PS216 –*HIGH PRESS. STEAM Green PS296 –*HOT WATER Yellow PS147 –*HOT WATER Green PS297 –*HOT WATER RECIRCULATION Yellow PS148 –*HOT WATER RECIRCULATION Green PS298 –*HOT WATER RETURN Yellow PS149 –*HOT WATER RETURN Green PS299 –*HOT WATER SUPPLY Yellow PS150 –*HOT WATER SUPPLY Green PS300 –*INDUSTRIAL HOT WATER Yellow PS203 –*INDUSTRIAL HOT WATER Green PS301 –*INDUSTRIAL WATER Green PS151 –* INSTRUMENT AIR Blue PS302 –*LAB VACUUM Yellow PS209 –*LAB VACUUM Green PS303 –*LAB VENT Yellow PS199 –*LAB VENT Green PS304 –*LAB WASTE Yellow PS198 –*LAB WASTE Green PS305 –*LOW PRESSURE AIR Blue PS306 –*LOW PRESS. CONDENSATE Yellow PS152 – *LOW PRESS. CONDENSATE Green PS307 –*LOW PRESSURE GAS Yellow PS308 –*LOW PRESS. NATURAL GAS Yellow PS309 –*LOW PRESSURE STEAM Yellow PS153 – *LOW PRESSURE STEAM Green PS310 –*MAKE-UP WATER Green PS210 –*MEDICAL AIR Yellow PS154– * MEDICAL AIR Blue PS311 –*MEDICAL VACUUM White PS155– * MEDICAL VACUUM Green PS312 –*MEDIUM PRESS. CONDENSATE Yellow PS218 –*MEDIUM PRESS. CONDENSATE Green PS313 –*MEDIUM PRESS. GAS Yellow PS219 –*

MEDIUM PRESS. NATURAL GAS Yellow PS156 – *MEDIUM PRESS. STEAM Yellow PS314 –*MEDIUM PRESS. STEAM Green PS315 –*NATURAL GAS Yellow PS157 – *NITROGEN Green PS158 – *NITROGEN Blue PS159 – *NITROGEN Black PS371 – *NITROGEN Orange PS316 –*NON-POTABLE WATER Yellow PS160 – *NON-POTABLE WATER Green PS317 –*OIL Yellow PS318 –*OVERFLOW Yellow PS161 – *OVERFLOW Green PS319 –*OXYGEN Green PS162 – * OXYGEN Yellow PS163 – *PLANT AIR Yellow PS164 – *PLANT AIR Blue PS320 –*PLUMBING VENT Green PS321 –*POTABLE WATER Yellow PS165 – *POTABLE WATER Green PS322 –*PROCESS WATER Green PS166 – *PROPANE GAS Yellow PS167 – *PUMPED CONDENSATE Yellow PS323 –*PUMPED CONDENSATE Green PS324 –*RAIN WATER Green PS168 – *REFRIGERANT LIQUID Yellow PS169 – *REFRIGERANT LIQUID Green PS325 –*REFRIGERANT SUCTION Yellow PS205 –*REFRIGERANT SUCTION Green PS326 –*RETURN Green PS170 – *RETURN Yellow PS171 – *ROOF DRAIN Green PS172 – *SANITARY DRAIN Green PS327 –*SANITARY SEWER Green PS173 – *SANITARY SEWER Yellow PS174 – *SANITARY VENT Yellow PS175 – *SANITARY VENT Green PS328 –*SANITARY WASTE Yellow PS176 – *SANITARY WASTE Green PS329 –*SPRINKLER Red PS177 – *SPRINKLER FIRE Red PS178 – *SPRINKLER WATER Red PS179 – *STEAM Yellow PS180 – *STEAM Green PS330 –*STEAM RETURN Yellow PS262 –*STEAM RETURN Green PS331 –*STEAM SUPPLY Yellow PS211 –*STEAM SUPPLY Green PS332 –*STORM DRAIN Green PS181 – *STORM SEWER Green PS182 – *STORM WATER Green PS250 –*SUPPLY Green PS183 – *SUPPLY Yellow PS184 – *TEMPERED WATER Yellow PS185 – *TEMPERED WATER Green PS334 –*TOWER WATER Green PS186 – *TREATED WATER Green PS335 –*VACUUM Yellow PS187 – *VACUUM Green PS188 – *VENT Yellow PS189 – *VENT Green PS190 – *WASTE Yellow PS191 – *WASTE Green PS192 – *WASTE WATER Green PS251 –*WATER Yellow PS193 – *WATER Green PS194 – *

www.hansensupply.com

6

Pipe Markers

Arrow Tape/Banding Tape

• Durable vinyl material withstands the elements indoors or out• Provides 360° visibility• Supplied in liner-mounted rolled form - use two bands per marker• Four roll widths available in your choice of nine color combinations

Banding pipes with Directional Flow Arrow Tape can enhance safety and improve operating efficiency.

Roll Calculation Guide Use to determine the number of rolls of Arrow or Banding Tape required for your job. Number of Pipe Color Bands Diameter Per Roll 1” 260 2” 150 3” 100 4” 80 5” 60 6” 50 7” 40 8” 35 9” 30 10” 30

Secure Self-Sticking Vinyl Pipe Markers with Arrow Tape to identify flow direction and reinforce color coding.

!

?


Customize It

Description 1/2” x 30 yds 1” x 30 yds 2” x 30 yds 4” x 30 yds

Custom Arrow Tape colors and sizes are also available. Call Customer service for

more information (800)782-1235.

Solid Color Pipe Banding Tape• Durable vinyl material withstands the elements indoors or out• Provides 360° visibility• Meets ASME color field size recommendation when used in combination with worded legends and directional flow arrows• Supplied in liner-mounted rolled form• Three roll widths available in your choice of 11 colors• Use two bands per marker

Roll Calculation Guide Use to determine the number of rolls of Arrow or Banding Tape required for your job. Number of Pipe Color Bands Diameter Per Roll 1” 260 2” 150 3” 100 4” 80 5” 60 6” 50 7” 40 8” 35 9” 30 10” 30 Solid Color Pipe Banding Tape

provides 360° visibility to improve safety and operational efficiency.

3.2 Mil Vinyl Catalog NumbersRoll Size Yellow Green Red Blue Orange White Brown Black Gray Purple Clear1” x 30 yds 36301 36304 36302 36303 91428 91429 36305 36306 36307 36308 363092” x 30 yds 55260 55263 55261 55262 91430 91431 36310 36311 36312 36313 363144” x 30 yds 36287 36290 36288 36289 91432 91433 36315 36316 36317 36318 36319

Roll Size Black/Yellow White/Green White/Red White/Blue Black/Green Black/White Black/Orange Black/Gray White/Brown Arrows Per Roll1⁄2” x 30 yds BAT1/2-YELLOW BAT1/2-GREEN BAT1/2-RED BAT1/2-BLUE BAT1/2-BLK/GRN BAT1/2-WHITE BAT1/2-ORANGE BAT1/2-GRAY BAT1/2-BROWN1” x 30 yds 91424 91425 91426 91427 91412 91413 91414 91415 109928 14402” x 30 yds 91420 91421 91422 91423 91416 91417 91418 91419 109929 7204” x 30 yds 91287 91290 91288 91289 91408 91409 91410 91411 109930 270

Catalog Numbers

800.782.1235

7

IIAR Pipe Markers

Pipe

Mar

kers

Stock IIAR Tapes Ideal for use with IIAR Pipe Markers Made from Indoor/Outdoor Self-Sticking Vinyl Material Use Arrow Tapes to indicate flow direction Five standard legends available Available in 1”, 2” and 4” widths

Hanply™ IIAR Pipe Markers Recommended for use in labeling ammonia piping and its contents

Available in a variety of sizes and styles

Meets IIAR Standard 29 stock legends available

Made from 3.2 mil Outdoor Grade Vinyl.

A uniform method of pipe identification, such as this one utilizing IIAR Pipe Markers, helps create a safer, more productive work environment.

Use Stock IIAR Tapes to secure IIAR Pipe Markers.

IIAR Component Markers

Indoor/Outdoor Self-Sticking Vinyl

Background Legend Catalog NumberLegend Color Color 1” x 30 yd roll 2” x 30 yd roll 4” x 30 yd rollARROW Yellow Black 91424 91420 91287LIQ Orange Black 55360 55361 55362VAP Blue Black 55363 55364 55365HIGH Red Black 55366 55367 55368LOW Green Black 55369 55370 55371

BD VAP LOW Ammonia PR101-C PR101-B PR101-ACD LIQ HIGH Ammonia PR102-C PR102-B PR102-ADC LIQ HIGH Ammonia PR103-C PR103-B PR103-AES VAP LOW Ammonia PR104-C PR104-B PR104-AEQ LIQ/VAP LOW Ammonia PR105-C PR105-B PR105-AHG VAP HIGH Ammonia PR106-C PR106-B PR106-AHGD VAP HIGH Ammonia PR107-C PR107-B PR107-AHPL LIQ HIGH Ammonia PR108-C PR108-B PR108-AHSD VAP HIGH Ammonia PR109-C PR109-B PR109-AHSS VAP LOW Ammonia PR110-C PR110-B PR110-AHTRL LIQ LOW Ammonia PR111-C PR111-B PR111-AHTRS LIQ/VAP LOW Ammonia PR112-C PR112-B PR112-AHTS VAP LOW Ammonia PR113-C PR113-B PR113-ALIC LIQ HIGH Ammonia PR114-C PR114-B PR114-ALSS VAP LOW Ammonia PR115-C PR115-B PR115-ALTRL LIQ LOW Ammonia PR116-C PR116-B PR116-ALTRS LIQ/VAP LOW Ammonia PR117-C PR117-B PR117-ALTS VAP LOW Ammonia PR118-C PR118-B PR118-APO LIQ LOW Ammonia PR119-C PR119-B PR119-APU LIQ HIGH Ammonia PR120-C PR120-B PR120-ARV VAP HIGH Ammonia PR121-C PR121-B PR121-ATSR LIQ/VAP HIGH Ammonia PR122-C PR122-B PR122-ATSS LIQ HIGH Ammonia PR123-C PR123-B PR123-ABLANK LIQ HIGH Ammonia PR124-C PR124-B PR124-ABLANK VAP HIGH Ammonia PR125-C PR125-B PR125-ABLANK LIQ/VAP HIGH Ammonia PR126-C PR126-B PR126-ABLANK LIQ LOW Ammonia PR127-C PR127-B PR127-ABLANK VAP LOW Ammonia PR128-C PR128-B PR128-ABLANK LIQ/VAP LOW Ammonia PR129-C PR129-B PR129-A

Indoor/Outdoor Self-Sticking Vinyl IIAR Physical Pressure Style C Style B Style A Abbreviation State Level Legend 4” x 24” (1/cd) 21⁄4” x 14” (1/cd) 11⁄8” x 7” (4/cd)

Self-sticking markers made from indoor/outdoor vinyl Component name is printed in black on safety yellow background Pressure levels printed on red for HIGH (more than 70 psig) and on green for LOW (70 psig or less) Marker size: 4” wide x 24” long Choose from 11 standard marker legends

Legend Pressure Level Part Number

ACCUMULATOR Low PR130-C COMPRESSOR High PR131-C CONDENSER High PR132-C EVAPORATOR Low PR133-C HEAT EXCHANGER Low PR134-C INTERCOOLER Low PR135-C RECEIVER High PR136-C RECIRCULATOR Low PR137-C THERMOSYPHON RECEIVER High PR138-C TRANSFER VESSEL High PR139-C OIL SEPARATOR High PR140-C


Pipe Markers

Snap-OnTM / Strap-on Markers

Snap-On Pipe Markers• Designed for pipes that have an outside diameter between 3⁄4” and 6”

(including insulation)• Coiled plastic is lightweight and durable• Ideal for indoor or outdoor use• May be applied to dirty, oily, greasy or rough surfaces• Installs quickly and easily in older facilities or new construction• 360˚ visibility• All stock Snap-On markers meet ASME (ANSI) Standard• Can be removed and reapplied in other areas• Choose from more than 150 stock legends or create your own

custom legend• Available in four standard, pre-coiled sizes

Snap-On plastic Pipe Markers are designed for general purpose pipe identification on pipes that have an outside diameter between 3⁄4” and 6”.

Outside Letter Style Order Diameter Height Description Style*

6” to 77⁄8” 11⁄4” Style F F

8” to 97⁄8” 21⁄2” Style G G

10” to 15” 31⁄2” Style H H

Strap-On Markers Size Chart

Outside Letter Style Order Diameter Height Description Style*

3⁄4” to 13⁄8” 1⁄2” Style A A 11⁄2” to 23⁄8” 3⁄4” Style B B 21⁄2” to 37⁄8” 11⁄4” Style C C 4” to 6” 11⁄4” Style D D

Snap-On Markers Size Chart

Strap-On Pipe Markers are designed for general purpose pipe identification on pipes that have a 6” or larger diameter.

!

?


Customize ItCustom Snap-On & Strap-On Pipemarkers are also avail-

able. NO minimum order: Orders shipped in 48 hours. STANDARD COLOR OPTIONS: Legend Colors: Black, White.

Background Colors: Yellow, Green, Red, Blue, White, Orange, Gray, Purple, Brown. Arrows are pre-printed on all

Snap-on & Strap-On markers.* When ordering, please indicate the catalog number for your desired legend followed by the letter code (A-D) that corresponds with your desired size and style.

* When ordering, please indicate the catalog number for your desired legend followed by the letter code (F-H) that corresponds with your desired size and style.

8

Strap-On Pipe Markers• Designed for pipes that have an outside diameter between 6” or larger

(including insulation)• Flat plastic with holes is lightweight and durable• Ideal for indoor or outdoor use• May be applied to dirty, oily, greasy or rough surfaces• Installs quickly and easily in older facilities or new construction• 360˚ visibility• All stock Strap-On markers meet ASME (ANSI) Standard• Can be removed and reapplied in other areas• Choose from more than 150 stock legends or create your own

custom legend• Supplied as a flat sheet with slots to accomodate hook and loop lock fastenter straps. Styles F-H come with nylon straps to fit specified pipe diameter.

800.782.1235

9

Snap-On / Strap-on Markers

Pipe

Mar

kers




* When ordering, please indicate the catalog number for your desired legend followed by the letter code (A-D, F-H) that corresponds with your desired size and style.

ACETONE Yellow 4157 – * ACETYLENE GAS Yellow 4158 – * ACID Yellow 4000 – *AIR Green 4001 – *AIR Blue 4002 – *AIR Yellow 4003 – *

AIR RETURN Blue 4159 – * AIR SUPPLY Blue 4160 – * ALCOHOL Yellow 4161 – *ALUM Yellow 4004 – *AMMONIA Yellow 4005 – *

ARGON Blue 4162 – *ARGON Green 4006 – *ASBESTOS FREE Blue 4007 – *ASBESTOS FREE INSULATION Blue 4008 – *ASBESTOS INSULATION Yellow 4009 – *

BLACK LIQUOR Yellow 4163 – * BLEACH LIQUOR Yellow 4164 – *BLOWDOWN Yellow 4014 – *

BLOWER AIR Green 4165 – *BOILER BLOWDOWN Yellow 4015 – *

BOILER DRAIN Yellow 4166 – *BOILER FEED Yellow 4016 – *BOILER FEED WATER Yellow 4017 – *

BREATHING AIR Green 4167 – *BRINE Green 4018 – *CARBON DIOXIDE Yellow 4019 – *CAUSTIC Yellow 4020 – *CAUSTIC SODA Yellow 4021 – *

CHEMICAL Yellow 4169 – *CHILLED WATER Green 4022 – *CHILLED WATER RETURN Green 4023 – *CHILLED WATER SUPPLY Green 4024 – *CHLORINE Yellow 4025 – *CHLORINE GAS Yellow 4026 – *

CIRCULATING WATER Green 4170 – * CITY GAS Yellow 4027 – *CITY WATER Green 4028 – *COLD WATER Green 4029 – *COLD WATER RETURN Green 4030 – *COLD WATER SUPPLY Green 4031 – *COMPRESSED AIR Yellow 4032 – *COMPRESSED AIR Green 4033 – *COMPRESSED AIR Blue 4034 – *CONDENSATE Yellow 4035 – *CONDENSATE DRAIN Yellow 4036 – *CONDENSATE RETURN Yellow 4037 – *CONDENSATE SUPPLY Yellow 4038 – *CONDENSER WATER Green 4039 – *CONDENSER WATER RETURN Green 4040 – *CONDENSER WATER SUPPLY Green 4041 – *COOLING WATER Green 4042 – *COOLING WATER RETURN Green 4043 – *COOLING WATER SUPPLY Green 4044 – *

CRUDE OIL Yellow 4171 – *DANGER ASBESTOS INSULATION Yellow 4045 – *DEIONIZED WATER Green 4046 – *

DEIONIZED WATER RETURN Green 4172 – * DEIONIZED WATER SUPPLY Green 4173 – * DIESEL OIL Yellow 4174 – * DISCHARGE Green 4175 – *DISTILLED WATER Green 4047 – *DOMESTIC COLD WATER Green 4048 – *DOMESTIC COLD WATER RETURN Green 4049 – *DOMESTIC COLD WATER SUPPLY Green 4050 – *DOMESTIC HOT WATER Yellow 4051 – *DOMESTIC HOT WATER RETURN Yellow 4052 – *DOMESTIC HOT WATER SUPPLY Yellow 4053 – *DRAIN Yellow 4054 – *DRAIN Green 4055 – *DRAIN WATER Green 4176 – *DRINKING WATER Green 4056 – *DYE Yellow 4177 – *EFFLUENT Yellow 4178 – *ELECTRIC TRACED Yellow 4179 – *ENGINE OIL Yellow 4180 – *EXHAUST Yellow 4057 – *EXHAUST AIR Blue 4181 – *

FEED Yellow 4182 – *FEED Green 4183 – *FILTERED WATER Green 4058 – *FILTRATE Yellow 4184 – *FIRE AUTO SPRINKLERS Red 4059 – *FIRE MAIN Red 4185 – *FIRE PROTECTION WATER Red 4060 – *FREON Green 4061 – *FRESH WATER Green 4186 – *FUEL GAS Yellow 4062 – *FUEL OIL Yellow 4063 – *FUEL OIL RETURN Yellow 4064 – *FUEL OIL SUPPLY Yellow 4065 – *FUEL OIL VENT Yellow 4066 – *GAS Yellow 4067 – *GAS Blue 4187 – *GASOLINE Yellow 4188 – *GLYCOL Yellow 4068 – *GLYCOL RETURN Yellow 4189 – *GLYCOL SUPPLY Yellow 4190 – *GREEN LIQUOR Yellow 4191 – *HALON Red 4192 – *HEAT Yellow 4069 – *HEATING RETURN Yellow 4070 – *HEATING SUPPLY Yellow 4071 – *HEATING WATER RETURN Yellow 4072 – *HEATING WATER SUPPLY Yellow 4073 – *HELIUM Green 4074 – *HIGH PRESSURE AIR Yellow 4075 – *HIGH PRESSURE CONDENSATE Yellow 4076 – *HIGH PRESSURE GAS Yellow 4193 – *HIGH PRESSURE HOT WATER Yellow 4196 – *HIGH PRESSURE NATURAL GAS Yellow 4194 – *HIGH PRESSURE NITROGEN Yellow 4195 – *HIGH PRESSURE STEAM Yellow 4077 – *HIGH PRESSURE WATER Yellow 4078 – *HOT Yellow 4197 – *HOT WATER Yellow 4079 – *HOT WATER RECIRCULATION Yellow 4080 – *HOT WATER RETURN Yellow 4081 – *HOT WATER SUPPLY Yellow 4082 – *HYDRAULIC FLUID Yellow 4198 – *HYDRAULIC LINE Yellow 4083 – *HYDRAULIC OIL Yellow 4199 – *HYDRAULIC SUPPLY Yellow 4084 – *HYDROCHLORIC ACID Yellow 4085 – *HYDROGEN Yellow 4086 – *HYDROGEN PEROXIDE Yellow 4087 – *INDUSTRIAL WATER Green 4088 – *INERT GAS Yellow 4220 – * INERT GAS Green 4221 – *INSTRUMENT AIR Yellow 4222 – *INSTRUMENT AIR Blue 4089 – *KEROSENE Yellow 4224 – *LAB VENT Yellow 4225 – *LAB WASTE Yellow 4226 – *LIQUID NITROGEN Yellow 4227 – *LOW PRESSURE Green 4228 – *LOW PRESSURE AIR Yellow 4090 – *LOW PRESSURE AIR Green 4229 – *LOW PRESSURE CONDENSATE Yellow 4091 – *LOW PRESSURE GAS Yellow 4240 – *LOW PRESSURE NATURAL GAS Yellow 4241 – *LOW PRESSURE NITROGEN Yellow 4242 – *LOW PRESSURE STEAM Yellow 4092 – *LOW PRESSURE WATER Green 4243 – *LUBE OIL Yellow 4244 – *MAKE-UP WATER Green 4093 – *MED. PRESSURE CONDENSATE Yellow 4094 – *MEDIUM PRESSURE STEAM Yellow 4095 – *MEDICAL AIR Blue 4096 – *MIXED GAS Yellow 4245 – *NAPHTHA Yellow 4246 – *NATURAL GAS Yellow 4097 – *NITRIC ACID Yellow 4247 – *NITROGEN Yellow 4098 – *NITROGEN Green 4099 – *NITROGEN Blue 4100 – *NITROUS OXIDE Yellow 4101 – *NON-POTABLE WATER Yellow 4102 – *OIL Yellow 4103 – *OUTSIDE AIR Blue 4248 – *

OVERFLOW Yellow 4104 – *OXYGEN Yellow 4105 – *OXYGEN Green 4106 – *OXYGEN Blue 4107 – *PEROXIDE Yellow 4249 – *PLANT AIR Yellow 4108 – *PLANT WATER Green 4109 – *PLUMBING VENT Green 4110 – *POLYMER Yellow 4260 – *POTABLE Green 4261 – *POTABLE WATER Green 4111 – *PROCESS WATER Yellow 4112 – *PROCESS WATER Green 4113 – *PROPANE GAS Yellow 4114 – *PULP Yellow 4262 – *PUMP Yellow 4263 – *PUMPED CONDENSATE Yellow 4264 – *RAIN WATER Green 4115 – *RAW WATER Green 4116 – *RED LIQUOR Yellow 4265 – *REFRIGERANT LIQUID Yellow 4117 – *REFRIGERANT SUCTION Yellow 4118 – *REHEAT WATER RETURN Yellow 4266 – *REHEAT WATER SUPPLY Yellow 4267 – *RETURN Yellow 4119 – *RETURN Green 4120 – *ROOF DRAIN Green 4121 – *SALT WATER Green 4268 – *SANITARY DRAIN Green 4122 – *SANITARY SEWER Green 4123 – *SERVICE AIR Yellow 4269 – *SERVICE WATER Green 4270 – *SEWAGE Yellow 4271 – *SEWER Green 4272 – *SLUDGE Yellow 4273 – *SOAP Yellow 4274 – *SODIUM HYDROXIDE Yellow 4275 – *SODIUM HYPOCHLORITE Yellow 4124 – *SOFT WATER Green 4125 – *SOLVENT Yellow 4126 – *SPENT ACID Yellow 4276 – *SPRINKLER Red 4277 – *SPRINKLER FIRE Red 4127 – *SPRINKLER WATER Red 4128 – *STEAM Yellow 4129 – *STEAM RETURN Yellow 4130 – *STEAM SUPPLY Yellow 4131 – *STORM DRAIN Green 4132 – *STORM SEWER Green 4133 – *STORM WATER Green 4134 – *SULFUR Yellow 4278 – *SULFUR DIOXIDE Yellow 4135 – *SULFURIC ACID Yellow 4136 – *SUMP PUMP DISCHARGE Yellow 4137 – *SUPPLY Yellow 4138 – *SUPPLY Green 4139 – *TANK DRAIN Yellow 4279 – *TEMPERED WATER Yellow 4140 – *TOLUENE Yellow 4141 – *TOWER WATER Green 4142 – *TOWER WATER RETURN Green 4143 – *TOWER WATER SUPPLY Green 4144 – *TREATED WATER Green 4145 – *VACUUM Yellow 4146 – *VACUUM Green 4147 – *VENT Yellow 4148 – *VENT Blue 4149 – *VENT Green 4150 – *WARM WATER Green 4280 – *WASTE Yellow 4151 – *WASTE WATER Yellow 4152 – *WASTE WATER Green 4153 – *WATER Yellow 4154 – *WATER Green 4155 – *WEAK BLACK LIQUOR Yellow 4281 – *WEAK WHITE LIQUOR Yellow 4282 – *WELL WATER Green 4156 – *WHITE LIQUOR Yellow 4283 – *


ID Tags

Stock Brass Valve Tags

Tag Size

Bottom Line

Hole Size

Top Line

Stock Stamped Brass Valve Tags 19 gauge cartridge brass (40 mils thick) 11⁄2” diameter Black filled text for easy readability Standard package: 25 identical tags

Stock Stamped Brass Valve TagsUse the chart below to determine if the tag you need is available as a stock order. In the first column, find the top line service abbreviation. Then, follow the row across to find the stock number for the serial sequence you need. Stock sequences are available for immediate shipment.

Blank Brass Valve Tags Standard packages: 25 & 100 identical tags

(Large quantity packs available)

Create your own custom brass tags on-site with steel stamps or with your own engraver.

!

?


Customize ItCustom Stamped and

Engraved Tagssee pg 11.

Bottom Line Number Sequence Top Line Copy 1-25 26-50 51-75 76-100 101-125 126-150 151-175 176-200 201-225 226-250 251-275 276-300 301-325 326-350 351-375 376-400 401-425 426-450 451-475 476-500 (Blank) 23200 23201 23202 23203 23204 23205 23206 23207 23208 23209 23617 23618 23619 23620 23621 23622 23623 23624 23625 23626 AC 23272 23273 23274 23275 23480 23481 23482 23483 23484 23485 23486 23487 23488 23489 23490 23491 23492 23493 23494 23495 CA 87460 87461 87462 87463 87464 87465 87466 87467 87468 87469 87470 87471 87472 87473 87474 87475 87476 87477 87478 87479 CHW 23516 23517 23518 23519 23520 23521 23522 23523 23524 23525 23526 23527 23528 23529 23530 23531 23532 23533 23534 23535 CHWR 23596 23597 23598 23599 23600 23601 23602 23603 23604 23605 23606 23607 23608 23609 23610 23611 23612 23613 23614 23615 CHWS 23576 23577 23578 23579 23580 23581 23582 23583 23584 23585 23586 23587 23588 23589 23590 23591 23592 23593 23594 23595 COND 23647 23648 23649 23650 23651 23652 23653 23654 23655 23656 23657 23658 23659 23660 23661 23662 23663 23664 23665 23666 CW 23256 23257 23258 23259 23400 23401 23402 23403 23404 23405 23406 23407 23408 23409 23410 23411 23412 23413 23414 23415 CWR 87100 87101 87102 87103 87104 87105 87106 87107 87108 87109 87110 87111 87112 87113 87114 87115 87116 87117 87118 87119 CWS 87120 87121 87122 87123 87124 87125 87126 87127 87128 87129 87130 87131 87132 87133 87134 87135 87136 87137 87138 87139 DCW 87200 87201 87202 87203 87204 87205 87206 87207 87208 87209 87300 87302 87303 87304 87305 87306 87307 87308 87309 87310 DCWR 87331 87332 87333 87334 87335 87336 87337 87338 87339 87340 87341 87342 87343 87344 87345 87346 87347 87348 87349 87350 DCWS 87371 87372 87373 87374 87375 87376 87377 87378 87379 87380 87381 87382 87383 87384 87385 87386 87387 87388 87389 87942 DHW 87180 87181 87182 87183 87184 87185 87186 87187 87188 87189 87190 87191 87192 87193 87194 87195 87196 87197 87198 87199 DHWR 87311 87312 87313 87314 87315 87316 87317 87318 87319 87320 87321 87322 87323 87324 87325 87326 87327 87328 87329 87330 DHWS 87351 87352 87353 87354 87355 87356 87357 87358 87359 87360 87361 87362 87363 87364 87365 87366 87367 87368 87369 87370 FP 23667 23668 23669 23670 23671 23672 23673 23674 23675 23676 23677 23678 23679 23680 23681 23682 23683 23684 23685 23686 GAS 23264 23265 23266 23267 23448 23449 23450 23451 23452 23453 23454 23455 23456 23457 23458 23459 23460 23461 23462 23463 HPS 44720 44721 44722 44723 44724 44725 44726 44727 44728 44729 44730 44731 44732 44733 44734 44735 44736 44737 44738 44739 HTG 23268 23269 23270 23271 23464 23465 23466 23467 23468 23469 23470 23471 23472 23473 23474 23475 23476 23477 23478 23479 HW 23276 23277 23278 23279 23416 23417 23418 23419 23420 23421 23422 23423 23424 23425 23426 23427 23428 23429 23430 23431 HWR 23536 23537 23538 23539 23540 23541 23542 23543 23544 23545 23546 23547 23548 23549 23550 23551 23552 23553 23554 23555 HWS 23556 23557 23558 23559 23560 23561 23562 23563 23564 23565 23566 23567 23568 23569 23570 23571 23572 23573 23574 23575 HVAC 87140 87141 87142 87143 87144 87145 87146 87147 87148 87149 87150 87151 87152 87153 87154 87155 87156 87157 87158 87159 LPC 87390 87391 87392 87393 87394 87395 87396 87397 87398 87399 87400 87401 87402 87403 87404 87405 87406 87407 87408 87409 LPS 44740 44741 44742 44743 44744 44745 44746 44747 44748 44749 44750 44751 44752 44753 44754 44755 44756 44757 44758 44759 MPS 44700 44701 44702 44703 44704 44705 44706 44707 44708 44709 44710 44711 44712 44713 44714 44715 44716 44717 44718 44719 OXY 87480 87481 87482 87483 87484 87485 87486 87487 87488 87489 87490 87491 87492 87493 87494 87495 87496 87497 87498 87499 PLBG 23260 23261 23262 23263 23432 23433 23434 23435 23436 23437 23438 23439 23440 23441 23442 23443 23444 23445 23446 23447 SPK 23627 23628 23629 23630 23631 23632 23633 23634 23635 23636 23637 23638 23639 23640 23641 23642 23643 23644 23645 23646 SPR 87160 87161 87162 87163 87164 87165 87166 87167 87168 87169 87170 87171 87172 87173 87174 87175 87176 87177 87178 87179 STM 23496 23497 23498 23499 23500 23501 23502 23503 23504 23505 23506 23507 23508 23509 23510 23511 23512 23513 23514 23515 VAC 87500 87501 87502 87503 87504 87505 87506 87507 87508 87509 87510 87511 87512 87513 87514 87515 87516 87517 87518 87519

Blank Brass Valve Tag

Size Shape 25/Pkg 100/Pkg 11⁄2” Round BV1.5RD-PK25 BV1.5RD-PK100 2” Round BV2RD-PK25 BV2RD-PK100 11⁄2” Square BV1.5SQ-PK25 BV1.5SQ-PK100 2” Square BV2SQ-PK25 BV2SQ-PK100

10 800.782.1235

11

Custom Brass Valve Tags

ID T

ags

Custom Stamped Brass Tags

Tag Size11/2”- 2”

Bottom Line

Hole Size

Top Line

HTG

96852” Octagon(1-1/2” Not Available)

MAX. OF 6 LETTERS

342HTG

1 - 1/2”

MAX. OF 5 LETTERS

HTG

5013MAX. OF 6 LETTERS

2”

741GAS 1-1/2”

Hexagon(2” Not

Available)

MAX. OF 5 LETTERS

23612”

MAX. OF 6 LETTERS

MAX. OF 5 LETTERS

PLBG

1341 - 1/2”

1/4”

1/2”

TRIANGLE (Illustrations shown smaller than actual size.) SqUARE

OCTAGON/HExAGON ROUND

CHOOSE: Shape, Size, Lettering for TOP line, Numbering for BOTTOM line,and Character Color (natural or black-filled). NOTE: Black-filled legend is recommended over Natural for maximum legibility. All tags are produced black-filled unless specifically requested.

MAXIMUM NUMBER OF CHARACTERS PER LINESize Top Line Bottom Line11⁄2” Tags 5 3

2” Tags 6 4

2”

HP


2”

1 - 1/2”

HP


1 - 1/2”

Square and Round Tags

Size Color 11⁄2” Natural or Black Fill 2” Natural or Black Fill

Octagon/Hexagon and Triangle Tags


Custom Engraved & Lasered Brass Tags Durable 19 gauge brass tags Available in round or square shapes in either 11⁄2” or 2” sizes Withstands temperatures of 1200˚ F

Engraved Brass TagsSize Color11 ⁄2” Natural or Black Fill2” Natural or Black FillQuantity pricing starts at 100 pieces. Black fill is standard and included in pricing.

Custom Stamped Tags

!

?


!

?


!

?


Lasered Durable 19 gauge brass tags Available in round or square shapes in either 11⁄2” or 2” sizes More economical option

Lasered Brass TagsSize Color11 ⁄2” Lasered Black2” Lasered BlackQuantity pricing starts at 100 pieces. Black mark is permanent.


ID Tags

Aluminum Tags

Anodized aluminum is dyed to offer color-coding options not available with brass tags

Available in twelve colors Choose from 11⁄2” or 2” round styles Standard package: 25 tags

Stock Blank Aluminum Valve Tags are ideal for color-coding applications.

Tag Size Shape Color Part #11 ⁄2” DIA. Round Olive Drab 87602 2” DIA. Round Olive Drab 87609 11 ⁄2” X 11 ⁄2” Square Olive Drab 87616 2” X 2” Square Olive Drab 87634 11 ⁄2” DIA. Round Orange 87604 2” DIA. Round Orange 87611 11 ⁄2” X 11 ⁄2” Square Orange 87618 2” X 2” Square Orange 87636 11 ⁄2” DIA. Round Pink 87603 2” DIA. Round Pink 87610 11 ⁄2” X 11 ⁄2” Square Pink 87617 2” X 2” Square Pink 87635 11 ⁄2” DIA. Round Red 49901 2” DIA. Round Red 49906 11 ⁄2” X 11 ⁄2” Square Red 87628 2” X 2” Square Red 87640 11 ⁄2” DIA. Round Violet 87600 2” DIA. Round Violet 87607 11 ⁄2” X 11 ⁄2” Square Violet 87614 2” X 2” Square Violet 87632 11 ⁄2” DIA. Round Yellow 49900 2” DIA. Round Yellow 49905 11 ⁄2” X 11 ⁄2” Square Yellow 87627 2” X 2” Square Yellow 87639

Tag Size Shape Color Part # 11 ⁄2” DIA. Round Black 87605 2” DIA. Round Black 87612 11 ⁄2” X 11 ⁄2” Square Black 87619 2” X 2” Square Black 87637 11 ⁄2” DIA. Round Blue 49902 2” DIA. Round Blue 49907 11 ⁄2” X 11 ⁄2” Square Blue 87629 2” X 2” Square Blue 87641 11 ⁄2” DIA. Round Gold 87601 2” DIA. Round Gold 87608 11 ⁄2” X 11 ⁄2” Square Gold 87615 2” X 2” Square Gold 87633 11 ⁄2” DIA. Round Green 49903 2” DIA. Round Green 49908 11 ⁄2” X 11 ⁄2” Square Green 87630 2” X 2” Square Green 87642 11 ⁄2” DIA. Round Light Blue 87606 2” DIA. Round Light Blue 87613 11 ⁄2” X 11 ⁄2” Square Light Blue 87620 2” X 2” Square Light Blue 87638 11 ⁄2” DIA. Round Natural 49904 2” DIA. Round Natural 49909 11 ⁄2” X 11 ⁄2” Square Natural 87631 2” X 2” Square Natural 87643

Stock Blank Aluminum Tags

Custom Stamped Aluminum Tags Durable 19 gauge aluminum tags Available in round or square shapes in either

11⁄2” or 2” sizes. Withstands temperatures of 1500˚ F

Custom Stamped


Custom Engraved Aluminum Tags

Dark Blue

Natural Black

Gold

Light Blue

Green

Olive Drab Pink

Yellow

Orange

Red Violet

Durable 19 gauge aluminum tags Available in round or square shapes in either 11⁄2” or 2” sizes Withstands temperatures of 233˚ F at a consistent heat.

Engraved Aluminum TagsSize Color 11 ⁄2” Natural or Black Fill 2” Natural or Black Fill For special fill colors please call (800)782-1235

!

?


!

?


12 800.782.1235

13

Stainless Steel Tags

ID T

ags


Stock Blank Stainless Steel Tags Ideal for harsh environments or where a

stainless steel material is specified Available in two standard sizes Round or square shapes available Tag hole is 3⁄16” Standard package: 25 tags (Large quantity packages available).

Customize Stock Blank Stainless Steel Valve Tags on the spot with your own engraver.

Tag Tag Catalog Size Shape Number 11⁄2” Round 44400 11⁄2” Square 44401 2” Round 44402 2” Square 44403

Custom Stamped Stainless Steel Tags Durable .025” stainless steel tags. Available in round or square shapes in either 11⁄2” or

2” sizes. Withstands temperatures up to 2700˚ F

Stamped Stainless Steel


Custom Engraved & Lasered Stainless Steel Tags Durable .025 stainless steel tags Available in round or square shapes in either 11⁄2” or 2” sizes Withstands temperatures of 2700˚ F

Engraved & Lasered Stainless SteelSize 11 ⁄2” Square or Round 2” Square or RoundTags are lasered black unless otherwise specified. Engraving with paint enamel fill is available please specify at time order. Other sizes available please call.

!

?


!

?


Custom 2-Ply Valve Tags (Round or Square)Size 11 ⁄2” Round HPN1.5RD 2” Round HPN2RD11 ⁄2” Square HPN1.5SQ2” Square HPN2SQ1” x 3” Rect. HPN1X3

Custom Engraved HANPLY Plastic Tags

Plastic Tags & Signs

Valve Tags Engraved on 2-ply 1/16” plastic (1/8” and 3-ply available) Standard colors include: Black, Red, White, Blue, Green, Yellow and Orange. (Other colors available) Standard Sizes Include 1.5”, 2” round or square Heat resistant, non-conductive, non-corroding

Color Options Lettering Background Black White Black Orange Black Yellow White Green White Blue White Red White Black Green White Red White Blue White

Standard Size Options Recommended Number of Characters Tag Size Top Line Bottom Line 11 ⁄2” 4 3 2” 5 5Hole size: 3 ⁄16”

Color Options Lettering Background Black White Black Orange Black Yellow White Green White Blue White Red White Black Green White Red White Blue White

Available in seven background colors

Available in seven background colors

HPNSize .75” x 2.5” 1” x 2.5” 1” x 3” 2” x 3” 1.5” x 4” 2” x 4” 3” x 5”

Equipment Plates Engraved on 2-ply 1/16” plastic (1/8” and 3-ply available) Standard colors include: Black, Red, White, Blue, Green,Yellow and Orange. (Other colors available) Standard Sizes Include 1x3”, 2x4” or 3x5” Heat resistant, non-conductive, non-corroding Mounting options: Holes for screws or sticky back at no additional charge

ID Tags

Why order from Hansen?Fast Turnaround - Most projects ship in 1-2 days. Need it same day? We can do it! We specialize in quick delivery.

Competitive pricing - Need pricing for a large project send us an email [email protected] or give us a call (800)782-1235.

A Variety of Materials - We stock hundreds of colors and materials for engraving. We have the material in stock and ready to fabricate.

Production Powerhouse - We process tens of thousands of engraving pieces every month. Our facilities are ready to handle your small and big jobs quickly.

One Stop Shop - Order everything in one place. We stock pipe labels, safety signs, underground tape, tag accesso-ries, label printer supplies and much more.

14 800.782.1235

Tag Accessories

15

ID T

ags

#16 Jack Chain Tough, solid chain Open and close links to adjust to

size needed Approximately 25 links per foot Approximately 10-12 inches is

enough to fasten one tag Standard package: 50 feet of chain,

sold in full packages only

Solid “S” Hooks Available in three size O.D.s:

13⁄4”, 11⁄2” and 11⁄4” Standard package: 100 “S”

Hooks, sold in full packages only

41/2” Beaded Chain Available in #6 brass, nickel plate,

aluminum, and stainless steel Extremely flexible 41⁄2” bead chain

with locking link Standard package: 100 chains, sold

in full packages only

Colored Nylon Ties 8” Nylon tie provides easy fastening of valve tags Hook ties together to create longer lengths Sold in Packs of 100

Catalog Number Description 23306 #6 Brass 23307 #6 Nickel Plate98856 #6 Aluminum98857 #6 Stainless Steel

#16 Jack ChainCatalog Number 23308 Brass #1698859 Stainless Steel

Catalog No. Color98848 Black98849 Blue98850 Green98851 Natural98852 Orange98853 Purple98854 Red98855 Yellow

Catalog For ValveNumber Size Stems Up ToBrass23305 13⁄4” O.D. 1⁄2”23304 11⁄2” O.D. 3⁄8”23303 11⁄4” O.D. 1⁄4”Stainless Steel98860 13⁄4” O.D. 1⁄2”98861 11⁄2” O.D. 3⁄8”98862 11⁄4” O.D. 1⁄4”

Valve Finder Ceiling Markers

Valve Finder Ceiling MarkersUse Valve Finder Ceiling Markers on accessible tile ceilings to indicate the location of valves, dampers, gauges, sensors and other controls 7⁄8” diameter head w/ adhesiveAvailable in six colorsStandard package: 25 identical markers

Catalog Color Number Yellow 23250 Green 23251 Red 23252 Blue 23253 White 23254 Orange 23255

Valve Chart Frames Use Valve Chart Frames to display your

valve tag charts (chart included) Use valve tag chart to list up to

50 locations Rugged extruded, clear anodized

aluminum frame comes with clear plastic window

Frame holds 8” x 11” valve tag charts

Valve Chart Frames

Catalog Number 23309

Steel Stamps Customize your own

valve tags onsite using Blank Brass Valve Tags (sold on page 18) and Steel Stamps to make the impression

Steel Stamps

Character Number of CatalogType of Set Size Characters Per Set Number Letter Set 1⁄4” 27 23240 Number Set 1⁄4” 9 23241 Letter Set 1⁄2” 27 23242 Number Set 1⁄2” 9 23243


Engravers

Engraving Machines

16 800.782.1235

Engraving area: 12’’ x 8.3’’ Maximum Holding Capacity: 9.2”W x 4.5”H x Unlimited Length

Machine size: 17.1" x 24" x 35.2" | Net weight: 110 lbs Cylindrical Attachment optional

Engraving area: 12’’ x 8.2’’ Vice Maximum Holding Capacity: 9.2”W x 7.5”H x Unlimited Length

Cylindrical: Dia. Min: .16” – Dia. Max: 6.7” x 17.7” Length Machines size: 21.7’’ x 20.1 ‘’ x 12.6’’ | Net weight: 60 lbs

IS900 90 Watt Spindle or 200 Watt Spindle Engraving area: 25” x 17” for all models

Maximum Holding Capacity: 17”W x 3.15”H x Unlimited Length Machine Dimensions: 39.8” x 32.5” x 23.7” | Net weight: 198 lbs

IS7000 - IS7000 XP - IS7000 XP Milling Engraving area: 24’’ x 32.1’’ Machines sizes: 43" x 55.9" x 28.9"

IS7000 Maximum Holding Capacity: 24”W x 3.15”H x Unlimited Length Net weight: 498 lbs (IS7000) 518 lbs (IS7000 XP & Milling)

IS8000 - IS8000 XP (shown) - IS8000 XP Milling Engraving area: 24’’ x 48’’ Machines sizes: 43" x 71.9" x 28.9"

IS8000 Maximum Holding Capacity: 24”W x 3.15”H x Unlimited L Net weight: 597 lbs (IS8000) 617 lbs (IS8000 XP & Milling)

CO2, YAG & Fiber Lasers LS100 Available in 30watt - 40watt

LS100EX CO2 Available in 30watt – 80watt LS100 engraving area: 12’’ x 18’’

Maximum Holding Capacity: 13” x 5.7”H x 20” 33lbs Max Weight Speeds up to 79in./sec.

Machine size: 30" x 28.5" x 17.3" Net weight: 95 lbs LS100Ex & Fiber (shown) engraving area: 12’’ x 24’’

Machine size: 40" x 29" x 18" Net weight: 175 lbs (LS100Ex) 165 lbs (LS100Ex Fiber)

Cylindrical Attachment optional

LS900 & LS900XP (shown) engraving area: 24’’ x 24’’ LS900 C02 Maximum Holding Capacity: 25.6” x 9.8”H x 24.8” 55lbs

Speeds up to 100 in./sec LS900 Machine size: 37" x 32" x 42" | Net weight: 400 lbs

LS900XP C02 Maximum Holding Capacity: 25.6” x 9.8”H x 24.8” 55lbs Speeds up to 150 in./sec

LS900XP Machine size 37" x 42" x 32" | Net weight: 374 lbs

Engr

aver

s

17

Engraving Machines

Plastic Engravables

Die # Sizes Material H01 .75” x 2.5” Indoor, Outdoor, TexturedHO2 1” x 2” Indoor, Outdoor, TexturedHO3 1” x 3” Indoor, Outdoor, TexturedHO4 1” x 4” Indoor, Outdoor, TexturedHO5 1” x 5” Indoor, Outdoor, TexturedH06 1.5” x 2” Indoor, Outdoor, TexturedH07 1.5” x 3” Indoor, Outdoor, TexturedH08 1.5” x 4” Indoor, Outdoor, TexturedH09 1.5” x 5” Indoor, Outdoor, TexturedH10 2” x 3” Indoor, Outdoor, TexturedH11 2” x 4” Indoor, Outdoor, TexturedH12 3” x 4” Indoor, Outdoor, TexturedH13 3” x 5” Indoor, Outdoor, TexturedH14 4” x 4” Indoor, Outdoor, TexturedH15 4” x 5” Indoor, Outdoor, TexturedH16 1.5” Round Indoor, Outdoor, TexturedH17 1.5” Square Indoor, Outdoor, TexturedH18 2” Round Indoor, Outdoor, TexturedH19 2” Square Indoor, Outdoor, TexturedAvailable in 7 standard colors and 3 grades of plastic: indoor, outdoor, and textured. Sold in packages of 25 and 100 pieces. Holes and sticky back are available. More custom colors are available. Call for more details.

Brass Engravables

Sizes Material.75” x 1.75” 18 gauge brass 1” x 2” 18 gauge brass1” x 3” 18 gauge brass1.5” x 3” 18 gauge brass1.5” Round 18 gauge brass1.5” Square 18 gauge brass2” Round 18 gauge brass2” Square 18 gauge brassSold in packages of 100 and 500 tags.

Aluminum Engravables

Sizes Material.75” x 1.75” 18 gauge aluminum 1” x 2” 18 gauge aluminum1” x 3” 18 gauge aluminum1.5” x 3” 18 gauge aluminum1.5” Round 18 gauge aluminum1.5” Square 18 gauge aluminum2” Round 18 gauge aluminum2” Square 18 gauge aluminumSold in packages of 100 and 500 tags.

Engraving Bits

Part No. Material Letter Size Shank SizeTAGIT-FLX-020 Plastic .10”-.24” 1/8”TAGIT-FLX-030 Plastic .25”-.49” 1/8”TAGIT-FLX-060 Plastic .5”-.74” 1/8”TAGIT-FLX-090 Plastic .75”-.99” 1/8”TAGIT-FLX-125 Plastic 1.0”+ 1/8”TAGIT-BAL-020 Alum./Brass .10”-.24” 1/8”TAGIT-BAL-030 Alum./Brass .25”-.49” 1/8”TAGIT-BAL-060 Alum./Brass .5”-.74” 1/8”TAGIT-BAL-090 Alum./Brass .75”-.99” 1/8”TAGIT-BAL-125 Alum./Brass 1.0”+ 1/8”

!

?


SUPPORTOn-site training and support

available anywhere in the US. Give us a call (800)782-1235

Hx-12812”x8” Engraving AreaIdeal for businesses, schools and other organizations wishing to avoid the time and cost of outsourcing, as well as start-up engraving shops working on a limited budget. Fast and quiet, the HX-128 features automatic surface detection at the push of a button and firmware that is upgradeable from your PC.

Hx-868”x6” Engraving Area Entry-level desktop device makes engraving easy. Active Surface Tracking ensures consistent, smooth engraving without scratches, even on irregular surfaces. Engrave just about any item, from name tags and medallions to awards and control panels.

Hx-12912” x 9” Engraving AreaPowered by a 20,000 rpm DC brushless motor, the HX-129 desktop engraver quickly and easily produces a wide range of popular jobs. Ease of use is one of the HX-129’s core strengths. An advancedsurface detector automatically determining the Z axis starting point. A hand-held control panel with a large backlit LCD screen lets you quickly select engraving options, such as spindle speed.


Hx Series Engraving Accessories

http://www.hansensupply.com/engraving-machines-supplies/engraving-machines/hx-128-engraving-machine.html



Smart SupplieS.Drop in your material and ribbon cartridges, the printer does the rest. these supplies feature smart cell technology that tells the printer exactly how to format your label according to the material that’s inserted. With label materials ranging from 1/2” to 4”. For a complete listing of supplies shop our website HansenSupply.com.

toucH anD go DiSplay.all the features you use most, right at your fingertips. this touch screen display lets you drag and drop objects and text until your label looks exactly the way you want it.

applicationS abounD. this one printer can take on all the different labeling needs of your facility or construction project. there are so many options packed into this printer, your applications are endless.

StanD alone or pc operation.you decide how you’d like to use the printer – either connected to your pc, or as a stand alone, mobile unit.

poWerFul SoFtWare optionS.markWare™ Software offers the industry’s most advanced pc design and editing capabilities. there’s more fonts, graphics, templates and import tools – and that’s just the beginning. printing from lists and saving jobs is a breeze.

the bbp™31 Sign & label printer is exactly how a printer is supposed to be. it’s easy to use. it’s packed with functionalities. and best of all, it’s got so many material options that this one printer can handle all of the labeling needs in your facility.

It’s the way label making should be.

Label Printers

18

Label Printers

800.782.1235

http://www.hansensupply.com/printers-supplies/benchtop-printers/bbp31-label-printer/bbp31-label-printer.html

Labe

l Prin

ters

19

Label Printers

SaVe time WitH FoolprooF label DeSign anD HigH SpeeD print the bmp71 printer is designed to help you get your job done quickly and efficiently – and that means making labels fast. at 1.5” per second, the bmp71 printer has the fastest print speed on the portable printer market.

but that’s not all. With built-in design wizards, material-recognition technology and storage space for over 100,000 label files, this printer can cut your label design time in half.

the best features and functionalities of brady’s portable label printers are now combined into one easy-to-use, top-of-the-line portable thermal transfer printer – brady’s bmp71 printer. Whether you need ¼” self-laminating wire marker labels or 2” wide vinyl pipe marker labels, you only need one label maker - the bmp71 printer can do it all!

cut material WaSte - preVieW labelS beFore you print!With a large, full color graphical screen, the bmp71 printer shows you exactly what your label will look like as you’re creating it – so there’s no guesswork. you can stop wasting label material on “test labels” and start saving time and money by creating a label once – knowing it’s correct before you even hit “print.”

The display includes:

■■ label material and ribbon part number

■■ label color and size (including the amount of remaining material)

■■ Font size, bold and other type functions

■■ application templates

■■ multi-area print areas

■■ remaining battery charge

■■ electrical ■■ Voice/Data comm ■■ Safety/general iD

Label Design Wizards Available For:


!

?


More OnlineFind videos, brochures and

pricing online at HansenSupply.com.

http://www.hansensupply.com/handheld-labelers-supplies/handheld-labelers/bmp71-label-printer.html

http://www.hansensupply.com/handheld-labelers-supplies/handheld-labelers/bmp71-label-printer.html

www.hansensupply.com©2013 Hansen Company, Printed in U.S.A. All rights reserved. Specifications subject to change without notice.

Create Custom Labels & Tagsquickly, easily and on time.Hansen offers a variety of Label Printers and Engraving machines for many applications. Whether you need signs, labels, tags or pipe markers, Hansen Company is your source.

Two Locations

Corporate Office:922 NW Leary Way, Seattle, WA 98107 CUSTOMer ServiCe: PH:1-800-782-1235 (206-789-5788) | Fx: 206-789-6636TeCHNiCAL SUPPOrT: PH:1-800-782-1235eMAiL: [email protected]

Southwest Office:7400 W Detroit Street Suite 130, Chandler AZ 85226 CUSTOMer ServiCe: PH: 480-699-2340 | Fx: 206-789-6636TeCHNiCAL SUPPOrT: PH:1-800-782-1235eMAiL: [email protected]

Documents

ASME (ANSI) Standard A13.1-2007