asl design guide - Maverick Poles€¦ · SPORTS LIGHTING SYSTEM DESIGN GUIDE ... Brite League Lighter floodlight and the new, ... silicone sealed to the lower reflector

SP

OR

TS

FL

OO

D

2

S P O R T S L I G H T I N G S Y S T E M D E S I G N G U I D E

A N E W T E A M W I T H T H E E X P E R I E N C E O F A P R O

www.AmericanSportsLighting.com

2

We are proud to introduce the American Sports Lighting

Plug-n-Play System. The Plug-n-Play System is complete

from the ground up, including poles from 40’ to 120’, service

platforms, cross arms, pre-wired capabilities, and a remote

ballast system. The Plug-n-Play System features the Day-

Brite League Lighter floodlight and the new, specification

grade, PM2 luminaire.

Now any outdoor field, from Baseball to Volleyball– recre-

ational to professional – can be effectively and economically

lit with the Plug-n-Play System. The American Sports Lighting

Team makes it easy! With answers to a few basic questions,

American Sports Lighting will layout, specify, price, and build

a complete system that will meet a project’s performance and

budget requirements, no matter how large or small.

Though newly introduced to the game, American Sports

Lighting brings together people with decades of experi-

ence and knowledge in sports lighting. Let American Sports

Lighting put its unique blend of youthful enthusiasm and

dedicated experience to work for you today!

The American Sports Lighting Team is ready to provide you

with the following information:

Application Layout

Complete layouts for any outdoor field, including point by points and aiming diagrams.

Specifications

Complete and detailed specifications for every-thing from the anchor bolts to the top of the pole.

Bill of Materials

Clear and concise bills for easy ordering and mis-take-free identification on the job site.

Quotations

Exact pricing to the bill of materials, including any accessories.

Quality Components

High-quality, durable products delivered directly to the job site complete, correct and on-time.

SELECTING THE PLUG-N-PLAY SYSTEM

Answers to these few basic questions, which can be easily determined from information in the next few pages,

will ensure the American Sports Lighting Plug-n-Play System is properly built for each field:

Determine Project Specifics

❑ What type of field?

❑ What’s the level of play (recreational, high school, etc.)? Level of play determines light levels, which helps to determine the type and quantity of luminaires.

❑ Are there any site considerations (pole positioning, light trespass, height restrictions, etc.)

Determine Pole Mounting

❑ Choose from three convenient mountings: anchor base, stub base or direct embed.

Determine Luminaire Mounting Style

❑ Service Platforms – side or top mount

❑ Cross Arms – side or top mount

Determine Installation

❑ Plug-n-Play System to be wired on-site?

❑ American Sports Lighting to pre-wire for easy “plug and play” installation

❑ Remote Ballast enclosure with pre-wired electrical components; shipped ready for mounting to the pole on-site.

Now, let the American Sports Lighting Team take it from here!

A N

EW

TE

AM

WIT

H T

HE

EX

PE

RIE

NC

E O

F A

PR

O

FOOTBALL

FOOTCANDLES CLASS OF SPECTATOR AVERAGE PLAY FACILITIES MAINTAINED II COLLEGES 5,000 AND MORE 50 SEMI-PRO PROFESSIONAL AMATEUR LEAGUES SPORTS CLUBS

III TRAINING FACILITIES NONE 30 ELEMENTARY SCHOOLS AMATEUR LEAGUES HIGH SCHOOLS

RECREATIONAL SOCIAL 20 IV ELEMENTARY SCHOOLS RECREATIONAL RECREATIONAL

FOOTCANDLES CLASS OF SPECTATOR AVERAGE PLAY FACILITIES MAINTAINED INFIELD OUTFIELD

I MAJOR LEAGUES ABOVE 5,000 150 100 COLLEGES & SEMI-PRO II AAA & AA 5,000 OR LESS 100 70 SEMI-PRO & COLLEGES HIGH SCHOOLS AMATEUR LEAGUES III C, D & SEMI-PRO LESS THAN 50 30 HIGH SCHOOLS 5,000 TO AMATEUR, MUNICIPAL NONE & LITTLE LEAGUES TRAINING FACILITIES ELEMENTARY SCHOOLS

TENNIS

SOFTBALL

FOOTCANDLES CLASS OF SPECTATOR AVERAGE PLAY FACILITIES MAINTAINED INFIELD OUTFIELD

III SEMI-PRO/ LESS THAN 5,000 50 30 COLLEGE TO NONE

IV HIGH SCHOOL NONE 30 20 HIGH SCHOOLS RECREATIONAL

SOCCER

BASKETBALL

FOOTCANDLES CLASS OF SPECTATOR AVERAGE PLAY FACILITIES MAINTAINED I AMATEUR LEAGUES NONE 30 HIGH SCHOOLS ELEMENTARY SCHOOLS

II RECREATIONAL 5,000 OR LESS 20 HIGH SCHOOLS

TY

PIC

AL

AP

PL

ICA

TIO

NS

AN

D L

IGH

T L

EV

EL

S

3

FOOTCANDLES CLASS OF SPECTATOR AVERAGE PLAY FACILITIES MAINTAINED I PROFESSIONAL ABOVE 5,000 100 COLLEGES

II COLLEGES 5,000 OR LESS 50 HIGH SCHOOLS

III HIGH SCHOOLS NONE 30 TRAINING FACILITIES ELEMENTARY SCHOOLS AMATEUR LEAGUES

IV TRAINING FACILITIES SOCIAL 20 ELEMENTARY SCHOOLS RECREATIONAL NON-COMPETITIVE

FOOTCANDLES CLASS OF SPECTATOR AVERAGE PLAY FACILITIES MAINTAINED I INTERNATIONAL/NATIONAL 5,000 AND MORE 100 PROFESSIONAL COLLEGES SPORTS CLUBS

II COLLEGES 5,000 OR LESS 60 SPORTS CLUBS AMATEUR LEAGUES HIGH SCHOOLS AMATEUR LEAGUES NONE 40 III HIGH SCHOOLS ELEMENTARY SCHOOLS IV ELEMENTARY SCHOOLS SOCIAL 30 RECREATIONAL RECREATIONAL

BASEBALL

For more information, consult your Sports System Specification Binder or go to www.AmericanSportsLighting.com.Data subject to change without notice4

ng.comsLightinLi h ianSportSAmericaA iwww.AAor go toFor more information, consult your Sports System Specification Binder oF i f i l S S S ifi i Bi dF e m c t S Sy S c B o A a t n .Data subject to change without noticet a t o

DA

Y-B

RIT

E P

RO

-MA

X 2

SP

OR

TS

FL

OO

DL

IGH

T

Unique integral carrying handle is contractor-friendly and facilitates fast and easy, two-bolt installation with the ballast weight centered directly over cross arm or platform.

The high performance Day-Brite PM2 features a uniquely designed lamp and reflector sys-tem that, by positioning the lamp vertically, maxi-mizes lamp performance for efficient lighting of sporting fields from rec-reational to professional levels, indoors or out.

Precision spun and anodized alumi-num two-part reflector system. Upper reflector is mounted directly to the housing, while the lower reflec-tor latches to the upper for easy installation and lamp replacement.

Impact-resistant tempered glass lens is silicone sealed to the lower reflector.

Revolutionary socket and upper reflector design positions the lamp vertically, maximizing arc tube lumen output and life com-pared to horizontal-positioned lamp systems.

Socket housing and built-in protractor provide full range of motion for accurate, repeatable aiming. Reflector lock ensures precise repositioning after relamping.

Heavy-duty die cast aluminum housing positions electrical components for cool opera-tion, allowing installations indoors or out. Formed steel upper housing protects inter-nal components.

400 – 400 10X – 1000 15X – 1500*(1)

PM2 BLANK – Type 3, 4 or 5 N6 – Type 6

M – Metal HalideS – High Pressure SodiumP – Pulse Start (Ballast option must also be specified)

FAMILY UPPER REFLECTOR LAMP SOURCE

12 – 120 20 – 208 24 – 240 27 – 277 48 – 480 MT – 120/208/240/277

LP – Lamp with fixture WDF – Wired Double Fuse*(45) WSF – Wired Single Fuse*(46) PWC3 – 3’ Pre-Wired Connector PWC6 – 6’ Pre-Wired Connector

OPTIONS

VOLTAGE WATTAGE

– – –

Footnotes:*(1) Metal Halide only.*(45) Use with 208, 240 and 480 volt.*(46) Use with 120, 277 and 347 volt.

General Notes:Mogul base lamp only.All options are factory installed.All accessories are field installed.

Warning: Refer to and follow the lamp manufacturer’s warnings and instructions.

N3 – Type 3 N4 – Type 4 N5 – Type 5 N6 – Type 6

PM2 3LV – Internal Louver – Type 3 4LV – Internal Louver – Type 4 5LV – Internal Louver – Type 5 6LV – Internal Louver – Type 6

FAMILY REFLECTOR OPTIONS

DISTRIBUTION

–

BALLAST ASSEMBLY

DIMENSIONS

REM – RemotePM2 BLANK– Type 3, 4, 5 N6 – Type 6

FAMILY HOUSING

–

REMOTE HOUSING

FINISH

UPPER REFLECTOR

PM2

NEMA Type 3, 4, 5, and 6 beam patterns

HOLES SIZED FOLE D R3/8" HEX BOLTH T3/8 HEX BOLT

(247.7 mm)49-3/4" MTG. CENT" EN9 3/4" MTG CENTEERR23-1/2"3-23 1/2"

(596.9 mm).

(695.3 mm)3(695 3 )27-3/8"-3

10-1/4"1(260.4 mm)6(260 4 mm)

(146.1 mm)65-3/4"-3

30"3(762 mm)226-1/2"26

(673.1 mm)73

23-1/2"2"(596.9 mm)m

(419.1 mm4 )16-1/2"16 1/2

(152.4 mm)6""

PM2 PM2

PM2 REM

BLANK – Black BR – Bronze GY – Gray

UL 1598 Listed suitable for wet location and up to 40° C ambient for all wattages listed.

EPA = 3.2 ft.2

WT = 65-70 lbs.

OPTICAL ASSEMBLY

SP

OR

TS

FL

OO

D

For more information, consult your Sports System Specification Binder or go to www.AmericanSportsLighting.com.Data subject to change without notice 5

m.ting.comirtsLighLi hcanSpoSw.AmeriA io wwwFor more information, consult your Sports System Specification Binder or go tF i f i l S S S ifi i Bi do r n u m f n r t w c o t mData subject to change without noticea ec h w

LGL M – Metal Halide S – High Pressure Sodium

LAMP SOURCE

–

BALLAST ASSEMBLY OPTICAL ASSEMBLY

CUL – UL Listed to meet CSA standards WDF – Wired Double Fuse *(45) WSF – Wired Single Fuse *(46) PT3 – 3' Cord PT6 – 6' Cord PWC3 – 3' Pre-wired Connector PWC6 – 6' Pre-wired Connector

OPTIONS

–

1M – 1000 - 1650w Metal Halide 4M – 400w Metal Halide 1S – 1000w High Pressure Sodium 4S – 400w High Pressure Sodium

WATTAGE DESIGNATION

400 – 400 10X – 1000 15X – 1500 *(1) 16X – 1650 *(1)

12 – 120 20 – 208 24 – 240 27 – 277 34 – 347 48 – 480 MT – 120/208/240/277

WATTAGE VOLTAGE LLG – General Duty LLH – Heavy Duty (Protective

outer aluminum shroud installed over inner reflector)

–

N2 – 2Hx2VN3 – 3Hx3VN4 – 4Hx4VN5 – 5Hx5VN6 – 6Hx6V

Footnotes:*(1) Metal Halide only.*(45) Use with 208, 240 and 480 volt.*(46) Use with120, 277 and 347 volt.

General Notes:Mogul base lamp only.All options are factory installed.All accessories are field installed.

Warning: Refer to and follow the lamp manufacturer’s warnings and instructions.

Accessories (order separately)LLPSF - Post Top Slipfitter for League LighterVSLL - Vandal Shield League LighterVLL - Visor for League LighterLLCL - Concentric Louver (internal)LLCHL - Concentric Half Louver (internal)WGLL - Wire Guard League Lighter

TYPE REFLECTOR BEAM SPREAD

DIMENSIONS

3"

1""

1-1/4""

7/16" DIA7/ .7/16 DIA25/32" DIA.5 A.

(134.9 mm)3(134.9 mm)5-5/16"5

455

30015015

30

7560

7560

45

90

90

90

SHROUDHRHEAVY DUTYV Y

GENERAL DUTYE TREFLECTORF RREFLECTOR

(415.9 mm)5.16-3/8"6-

(485.8 mm)8 19-1/8"/19 1/8"

(177.8 mm)7 m)( )7"

(527.1 mm)5 m20-3/4"20 3/4

00NAADI

RR115

3300

66007755

4545

180165

11550

90901055120

135

The Day-Brite League

Lighter is the choice

for lighting recreation-

al or competitive facil-

ities requiring an effi-

cient and economical

luminaire.

Die cast aluminum housing stands up to extreme environments. Easy access to ballast compartment.

Hinged tempered glass lens with heavy-gauge galvanized steel frame. Door hinges downward for convenience.

“Double Slant 2” heat-sinked ballast for cooler ballast operation and longer component life.

Lamp stabilizer grips lamp envelope, centering and stabilizing lamp.

Rugged reflector constructed of heavy gauge, precision spun and anodized aluminum.

NEMA Type 2, 3, 4, 5, and 6 beam patterns.

Dark bronze polyester pow-der finish on housing is cor-rosion and UV resistant.

UL 1598 Listed for wet location at 25°C.

EPA = 2.4 ft.2

WT = 61-68 lbs.

LE

AG

UE

LIG

HT

ER

TM F

LO

OD

LIG

HT

LGL

LGLFAMILY


SP

OR

TS

SY

ST

EM

PO

LE

S

ANCHOR BASEAnchor base is the traditional mounting method for steel sports system poles. Anchor bolts are

cast into a poured concrete foundation, and the foundation is strengthened with steel reinforcing

bars (foundation and steel reinforcement by others). Properly sized anchor bolts, designed for each

pole size, and positioning templates are provided with each pole to ensure accurate positioning of

the pole.

American Sports Lighting poles are

constructed from heavy-duty, single

ply sheet steel. Each shaft is formed

into a tubular shape with longitu-

dinal welds, producing very strong

poles that will withstand years of

abuse from the elements without

fail. The poles have been carefully

engineered and analyzed to perform

in wind speeds ranging from 70

to 120 m.p.h. plus a 1.3 wind gust

factor.

Each of the American Sports

Lighting poles, in either anchor

base, stub base or direct embed,

can accommodate any of the cross

arms or platforms, as well as the

remote ballast or pre-wired sys-

tem enclosures. The pole shafts are

available galvanized or polyester

powder coated for protection from

the elements.

STUB BASEThe unique Stub Base dramatically simplifies on-site installation. The Stub Base has an integrally welded

flange plate that mates with the pole structure. The base is dropped into the ground, stubbed out for

wiring, and then concrete is poured around it to secure it structurally (concrete supplied by others). The

pole and luminaire structure is simply set onto the flange and bolted into place. Slotted bolt holes on both

flange plates allow for any fine-tuning in aiming of the assembly.

SLT

SLIP

SLIP

MIDDLE SHAFT

LENGTH

TOP SHAFT

LENGTH

TOP O.D.

BASE O.D.

TOP O.D.

BASE O.D.

BASE O.D.

REINFORCEDHANDHOLE

HANDHOLE(S) AND COUPLING(S)AS REQUIRED FOR BRACKETS AND FIXTURES

TOP O.D.

TOTAL LENGTH

BASE SHAFT

LENGTH

18"

GROUND LEVEL

REFER TO STUB BASE DETAIL

18"

HANDHOLE(S) AND COUPLING(S)AS REQUIRED FOR BRACKETS AND FIXTURES

BASE O.D.

MIDDLE SHAFT

LENGTH

TOTAL LENGTH

BASE SHAFT

LENGTH

SLIP

TOP O.D.

BASE O.D.

TOP O.D.

TOP O.D.

TOP SHAFT LENGTH

SLIP

BASE O.D.

REINFORCEDHANDHOLE

SP

OR

TS

FL

OO

D



DIRECT EMBEDDirect embed is yet another traditional method for installing sports lighting poles. Each pole height

has been engineered with a pre-determined embedding depth. Once the lighting structure has been

assembled, the pole is lifted and dropped into the ground at its pre-determined depth. The hole is

then back-filled with concrete to secure the entire structure (concrete supplied by others).

ORDERING MATRIX

For more information, consult your Sports System Specification Binder or go to www.AmericanSportsLighting.com.Data subject to change without notice

SLT WL1WL2WL3WL4WL5WL6WL7WL8

WL9WL10WL11WL12WL13WL14WL15

AB – Anchor Base SB – Stub BaseEM – Direct Embed

GV – Galvanized BZ – Bronze Powder BK – Black Powder WT – White Powder GY – Gray Powder

040 – 40 feet 050 – 50 feet 060 – 60 feet 070 – 70 feet 080 – 80 feet 090 – 90 feet 100 – 100 feet 110 – 110 feet 120 – 120 feet

FAMILY WIND LOAD RATING FINISH

–

BASE STYLEHEIGHT

SLT –

MIDDLE SHAFT

LENGTH

TOTAL LENGTH

BASE SHAFT

LENGTH

SLIP

TOP O.D.

BASE O.D.

REFER TO DIRECT EMBED DETAIL

BASE O.D.

18"GROUND LEVEL

TOP O.D.

TOP O.D.

TOP SHAFT

LENGTH

SLIP

HANDHOLE(S) AND COUPLING(S)AS REQUIRED FOR BRACKETSAND FIXTURES

BASE O.D.

REINFORCEDHANDHOLE

EMBEDDEPTH



CAG-TT-06EPA = 4.90Weight = 512







American Sports Lighting

System top-mount platforms

mount directly to the top of the

pole structure and are secured

with bolts through mating

plates. They are constructed

from heavy-duty tubular steel

with strong mesh flooring on

the catwalk. Each provides

42" high rails to ensure safe

mobility for maintenance

personnel during routine ser-

vicing. When top-mount plat-

forms are specified, steps and

safety cable will be added to

the poles to facilitate access

to the platforms.

PL

AT

FO

RM

-TO

P M

OU

NT

CAG

PRE-WIRED OPTION

ES1 – Pre-Wired System Distribution and Disconnect Box at Pole Base

ES2 – Pre-Wired System Distribution Box at Pole Top, Disconnect Box at Pole Base

FINISHNO. of FIXTURES

06 09 1215182124

FAMILY

FRAME CONSTRUCTION

CRA - Cross ArmTop Mount

ORDERING MATRIX

––– –TT


CAG

TUB - TubularTop Mount

SP

OR

TS

FL

OO

D



CAG-SA-04EPA = 9.33Weight = 245




CAG-ST-04EPA = 5.67Weight = 378




System side-mount platforms

secure to the side of the pole

structure with heavy-gauge

U-bolt brackets. They are

available in either tubular

or angular steel versions.

Both are constructed from

heavy-duty steel with strong

mesh flooring on the catwalk.

Each version provides safety

features such as kick rails,

helping to ensure that tools

aren't accidentally knocked

off of the platforms. When

side-mount platforms are

specified, steps and safety

cable will be added to the

poles to facilitate access

to the platforms.



PL

AT

FO

RM

-SID

E M

OU

NT

CAG

PRE-WIRED OPTION




04 081216

FAMILY

FRAME CONSTRUCTION

CRA - Cross ArmSide Mount

ORDERING MATRIX

––– –ST


CAG

ST - Side Mount Tubular Steel

SA - Side Angle Mount*

* Pre-wiring is not available with SA type.



CR

OS

S A

RM

-TO

P M

OU

NT

CRA-TT-02EPA = 1.56Weight = 64









CRALeague Lighter Sports System

top-mount cross arms mount

directly to the top of the pole

structure and are secured

with bolts through mating

plates. They are constructed

from heavy-duty tubular steel

and offer a great range of

mounting quantities from 2

to 18 luminaires. The tubular

construction also makes it an

excellent choice when spec-

ifying pre-wired or remote

wired systems.

PRE-WIRED OPTION




02 04 06081012141618

FAMILY

FRAME CONSTRUCTION

CRA - Cross ArmTop Mount

ORDERING MATRIX

––– –TT


CRA

TT - Top MountTubular Steel

SP

OR

TS

FL

OO

D



CR

OS

S A

RM

-SID

E M

OU

NT


CRA-ST-02EPA = 0.90Weight = 41





CRA-SA-02EPA = 1.35Weight = 31





Sports System side-mount

cross arms secure to the side

of the pole structure with

heavy-gauge U-bolt brackets.

They are available in either

tubular or angular steel ver-

sions. Both are constructed

from heavy-duty steel and are

an excellent choice when

small quantities of luminaires

are required. Also, they can

be used in conjunction with

top-mount cross arms or plat-

forms to economically add

luminaire quantities.

CRA

PRE-WIRED OPTION




02 03 040506

FAMILY

FRAME CONSTRUCTION

CRA - Cross ArmSide Mount

ORDERING MATRIX

––– –ST


CRA

ST - Side MountTubular Steel

SA - Side Angle Mount*

* Pre-wiring is not available with SA type.


PR

E-W

IRE

D S

PO

RT

S S

YS

TE

M

ES1

SPECIFICATION FEATURES• Multi-circuit systems available

• Configured for any voltage & phase

• Standard components include cages and cross arms

• Designed to withstand any wind velocity

• Pole heights can extend to more than 150 feet

• Finishes include galvanizing, and power coat paint

JUNCTION BOX MOUNTING

TOP CONNECTION

SYSTEM ES1

Bottom-mounted Disconnect/Distribution Box

Individually fusedfor each luminaire

Factory Pre-set aiming coordinates

Factory Pre-wired

Power/Drop Cord

• Factory installed/wired to each 3-pin female receptacle.

• Cut to the proper length for the pole structure.

• Quick-connect plug mates with corresponding plug in distribution box.

3-Pin Female Receptacle• Widely-accepted universal

component in the luminaire industry.

• Mating 3-pin male connector factory-installed in luminaire.

• Receptacle leads are hardwired to power/drop cord.

Factory Pre-Determined Aiming

• Aiming layouts coordinated with Application Team.

• Customized label provided at each luminaire location.

• Pre-determined luminaire aiming coordinates.

• Label displays luminaire type and luminaire design.

Distribution and Disconnect Junction Box

• Completely pre-wired at the factory.

• Multi-pin coordinator is hardwired to fuse block to accept mating drop cord.

• Individual dual fusing provided for each luminaire.

• Factory installed disconnect switch.

• Mounting hardware provided for attachment to pole.

ES1


12 Degrees Left44 Degrees DownReflector: 3x3X-Coordinate: 25Y-Coordinate: 15

American Sports Lighting Order No. _____

SP

OR

TS

FL

OO

D


3-Pin Female Receptacle

• Widely-accepted universal component in the luminaire industry.

• Mating 3-pin male connector factory-installed in luminaire.

• Receptacle leads are hardwired to power/drop cord.

Factory Pre-Determined Aiming

• Aiming layouts coordinated with Application Team.

• Customized label provided at each luminaire location.

• Pre-determined luminaire aim-ing coordinates.

• Label displays luminaire type and luminaire design.

ES2

SYSTEM ES2

DISCONNECT BOX

TOP DISTRIBUTION BOX

SPECIFICATION FEATURES• Multi-circuit systems available

• Configured for any voltage & phase

• Standard components include cages and cross arms

• Designed to withstand any wind velocity

• Pole heights can extend to more than 150 feet

• Finishes include galvanizing and powder coat paint

Bottom-mounted Disconnect Box

Top-mounted Distribution Box

Factory Pre-set aiming coordinates

Factory Pre-wired

PR

E-W

IRE

D S

PO

RT

S S

YS

TE

MDisconnect Box

• Box is UL-listed.

• Mounts to base of the pole with supplied hardware.

• Serves as connection between power and drop from the distribution box.

• Main in-line fuses installed at the factory.

Distribution Junction Box

• Each luminaire lead is hardwired to distribution block.

• Box is factory-installed on cross arm.

• Drop-cord is hardwired to the distribution block at the factory.

ES2



12 Degrees Left44 Degrees DownReflector: 3x3X-Coordinate: 25Y-Coordinate: 15

American Sports Lighting Order No. _____


For more information, consult your Sports System Specification Binder or go to www.AmericanSportsLighting.comF i f i l S S S ifi i Bi d A i S Li h iF e m c t S Sy S c B o A a t n .Data subject to change without noticet a t o

Polyethylene jacketed 17 con-ductor, 14 Ga. wire rated at 600V. Each luminaire individually fused. Wiring capabilities for all voltages in single or three phase systems.

Unique design allows electrical components to run cool, ensuring long system life.

Enclosure mounts quickly and easily to any American Sports Lighting System pole.

NEMA 3R rated enclosure is constructed of galvaneal steel and finished in a dura-ble polyester powder coat paint. Enclosure can house electrical components for up to eight luminaire.

The American Sports Lighting Plug-n-Play System remote enclosure provides added application flexibility along with simplified system maintenance. Each enclosure is NEMA 3R rated for maximum weather-ability.This system is UL Listed.

All electrical components are pre-wired at the factory with mat-ing connectors to each luminaire, allowing for easy plug & play installation. Drop cables include Kellums cord grips for safe, secure feed-through up the pole.

RE

MO

TE

BA

LL

AS

T S

YS

TE

M

RBE

RBE 12 – 120 Volt20 – 208 Volt24 – 240 Volt27 – 277 Volt

1 – 1 Ballast 2 – 2 Ballasts 3 – 3 Ballasts 4 – 4 Ballasts 5 – 5 Ballasts 6 – 6 Ballasts 7 – 7 Ballasts 8 – 8 Ballasts

10X – 1000 watt 15X – 1500 watt 16X – 1650 watt

FAMILY

WATTAGE

VOLTAGE

BALLAST QUANTITY

–

ORDERING MATRIX

RBE

RBE-1 SYSTEMFactory Pre-Wired

Simplified MaintenancePlug & Play Installation

The American Sports Lighting System remote enclosure provides added application flexibility along with simplified system maintenance. Each enclosure is NEMA 3R rated for maximum weatherability. UL listed.

SP

OR

TS

FL

OO

D


Visit our web site at www.AmericanSportsLighting.com2001 Beach Street, Suite 800, Fort Worth, Texas 76103

Phone: 1-800-433-7753 • Fax: 817-926-5003

E-mail: [email protected] Sports Lighting reserves the right to make changes without notice.

©2007 Whitco Poles.

SP

OR

TS

FL

OO

D

2

Visit our web site at www.AmericanSportsLighting.com

2001 Beach Street, Suite 800, Fort Worth, Texas 76103 Phone: 1-800-433-7753 • Fax: 817-926-5003

E-mail: [email protected]

American Sports Lighting reserves the right to make changes without notice.

©2007 Whitco Poles, Inc.

Documents

asl design guide - Maverick Poles€¦ · SPORTS LIGHTING SYSTEM DESIGN GUIDE ... Brite League Lighter floodlight and the new, ... silicone sealed to the lower reflector