Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
No.73,Zhongshan 12th Rd.,Daya Dist.,Taichung City 428,Taiwan(R.O.C)Tel:+886-4-2565 3080 Fax:+886-4-2565 [email protected] www.kencnc.com
KEN ICHI MACHINE CO., LTD.
Asia’s OnlyProfessional 5-Axis Machine Center Manufacturer
www.kencnc.com
LINEAR MOTOR DRIVE
Box in Box symmetrical designMinimize environmental and temperature influence.
TWO-AXIS MILLING HEADS
Aircraft Industry General Machining IndustryAutomotive Industry
Company introduction Linear Moto / D.D. Motor / Box in Box
LINEAR MOTOR DRIVEAsia’s OnlyProfessional 5-Axis Machine Center ManufacturerKEN CNC is the only company that specializes in 5-axis machine centers for the aircraft and automotive industries. We integrate European design and key European components with high-speed 5-axis machine manufacturing professionals in Taiwan, to satisfy the needs of the following industries:
Aluminum Components: Aluminum extrusion profiles, floor beams, frames, rib spars, flap tracks, frame board, fuel tank side covers, etc.very tough materials:(Titanium, inconel, stainless steel, special steel, alloy steel) High precision Aircraft components, Engine casing, engine brackets, Blisk.
Heavy-duty components for: machine structures, boats, railways, wind turbines, gearboxes, etc.
Stamping die and mold : fenders, engine covers, door panels, body side, etc.Plastic injection molding: bumpers, dashboard,Lamp mold, inner door panels, plastic interior components, etc.
Crossbeam and Saddle by box in box design, its reliable and high rigidity will minimize the environment temperature affection.Y-axis with 4 linear guide ways, the two tracks on XY plan and YZ plan to support Ram & Saddle, which could reach optimize dynamic characteristics.Z-axis equipped with 4 linear guide ways on two side of the slider, each side undertake the same cutting force, which balance design would enhance the machine lifetime and accuracy.Dual ball screw and dual counterbalance system in Z axis, its stable structure for high speed cutting purpose.
Backlash free offer high positioning accuracyDirect transmissionReduce ball screw/nut, bearings couplings those componentsFree of wear due to friction free drive conceptSimple structure / long-term accuracy / easy maintenance
Using Italian Modular design Two-Axis Milling Heads Suitable for plastic injection mold.Symmetric “open frame” innovative design made in GGG40 nodular cast iron for head.Dedicated “Direct-Drive”torque motor with integrated water cooling system for B/C axis.Double row crossed roller bearing support achieving excellent rigidity and accuracy for B/C axis.Using high-resolution, high-precision encoder for B/C axis.KenIchi has prepared modular components spare parts, repair localized to shorten the maintenance cycle.
More StabilityMore PrecisionMore Strength
hot temperaturecold temperature
01 02
Series Series Series Series Series Series Series Series Series Series Series Series
HIGH SPEED Series
HIGH SPEED Series
HIGH TORQUE Series
03 04
P.7 P.23P.13 P.27 P.29 P.31P.9 P.25P.19P.17P.5 P.21
High speed series High torque series
05 06
5-Axis Double column machine center
High rigidity structure design Linear Motor Drive:High speed / High accuracy.Series
High rigidity one piece column and crossbeam structure.X/Y - Axis linear motor drive.Rapid feedrate:60m/min.Direct-drive motor two-axis milling head.
one-piece base and column and crossbeam with high rigidity, to show the best structural rigidity and stability of high speed cutting.
Aircraft Industry Floor Beam、Wing Rib StructureAutomotive Industry Plastic Mold、Lamp MoldMechanical component
Linear Motor D.D. Motor
Milling Head (B&C Axis) Torque motor driver
TCH-L13(EVO)
TCH-19(A63)
TCH-19(A100)
Rotation angle B&C +/- ± 105°/ ±250° ± 100°/ ±240° ± 100°/ ±240°
Spindle
Tool Shank HSK A63 HSK A63 HSK A100
Max. Speed rpm 24,000 24,000 15,000
Spindle Power S1-100% (S6-40%) kw 28 (33) 42 (55) 50 (65)
Spindle Torque S1-100% (S6-40%) Nm 39(56) 67 (87) 96 (124)
Specialized design for plastic injection mold Three kinds of Direct-drive motor two-axis milling head.
TCH-L13 EVO TCH-19 (A63)
Specifications
The Company reserves the right to change, with all the technical specifications of the contract-based technology.
Specifications /Mold Unit Focus 5 - 2022 / 2032 / 2040TravelX-axis (Longitudinal) mm 2,200 / 3,200 / 4,000Y-axis (Cross) mm 2,000Z-axis (Vertical) mm 1,000Distance between column mm 1,650Table length mm 2,200 / 3,200 / 4,000Table width 1,300Table load Kg 5,000
Milling head Unit TCH-L13(EVO) TCH-19(A63)FeedrateX/Y/Z-axis drive mode X/Y/Z Linear motor/ Linear motor / dual ball screwsX/Y/Z-axis rapid feedrate m/min 60 / 60 / 50Auto tool changer Tool shank HSK A63Tool magazine capacity Pcs 32
TCH-19(A100)
Focus 5 Focus 5
Focus 5
07 08Focus 5R/5RL Focus 5R/5RL
5-Axis Double column machine centerwith Rotary table
Series
Double columnMaintain stable during high speed cutting
One-Piece DesignBest structural rigidity
Direct-Drive MotorRotary table / B-axis swing milling head
Linear Motor - X/YHigh speed & High accuracy
Aircraft IndustryAutomotive IndustryMechanical component
Linear Motor
Rotary table (C axis)Direct driven by torque motorDiameter: 1,250mm
Direct driven by torque motor, no gear device, no wearing!It can achieve high accuracy with encoder.Rotation speed: 50 rpm.Clamping torque: 4000 Nm.
D.D. Motor
Linear motor drive:High speed / High accuracy.
B axis specifications B Axis
Rotation speed rpm 50
Max. swivel torque of motor Nm 1,450
Braking torque Nm 10,500
Swing range of head +/- +110° / -45°
Positional accuracy arc.sec +/- 3
European fork type swivel milling headSpecifications
The Company reserves the right to change, with all the technical specifications of the contract-based technology.
Specifications /Mold Unit Focus 5R Focus 5RLTravelX-axis (Longitudinal) mm 2,000 2,500Y-axis (Cross) mm 1,400Z-axis (Vertical) mm 1,000Distance between column mm 1,450Diameter of rotary table mm Ø1,250Table size mm - 1,250 x 2,500Table load Kg 4,000
B Axis milling head Unit (DD motor driven)FeedrateX/Y/Z-axis rapid feedrate m/min 60 / 60 / 48Auto tool changer Tool shank HSK A100Tool magazine capacity Pcs 32
Spindle specifications power and torque
Spindle Maximum power S1-100% (S6 - 40%) kw 47 (63.5)
Spindle speed rpm 13,000
Full torque output S1-100% (S6 - 40%) Nm 150 (202)
Spindle lubricating Oil mist lubrication
Focus5R/5RL
09 10
Gantry Type High Speed 5-axis Machine Center
Gantry Type.Box in Box symmetrical design.Column and base one piece design.X/Y - Axis linear motor drive.Rapid feedrate:60m/min.Direct-drive motor two-axis milling head.
Aircraft Industry Aluminum FrameAutomotive Industry Plastic Injection moldMechanical component
Column and base one piece design.Perfect solution
Linear Motor Drive:High speed / High accuracy.
The expansion of hot or cold temperature does not interfere with the center, so this system can be ensured to have the excellent precision during working hours.
More StabilityMore PrecisionMore Strength
Improves the overall structural rigidity.Ensure the stability of precision and mechanical performance.
Back lash free high positioning accuracy.Free of wear due to friction free drive concept.Fewer parts(reduce ball screw / nut, bearings couplings)Simple structure / long-term accuracy / easy maintenance
Advantage of Linear Motor:
Linear Motor D.D. Motor Box in Box
hot temperaturecold temperature
Box in Box symmetrical designMinimize environmental and temperature influence.
Compact B Compact B
Series
LINEAR MOTOR DRIVE
Compact B
11 12
Milling Head (B&C Axis) Torque motor driver TCH-19(A63) TCH-19(A100)
Rotation speed B &C Rpm(360°/S) 50/50 50/50
Max. torque: B &C Nm 1100 / 900 1100 / 900
Clamping torque: B &C Nm 4000/4000 4000/4000
Measuring resolution B &C Arc.sec ±3/±3 ±3/±3
Rotation angle B&C +/- ± 100°/ ±240° ± 100°/ ±240°
Spindle
Tool Shank HSK A63 HSK A100
Max. Speed rpm 24,000 15,000
Spindle Power S1-100% (S6-40%) kw 42 (55) 50 (65)
Spindle Torque S1-100% (S6-40%) Nm 67 (87) 96 (124)
Specialized design for plastic injection mold.Three kinds of Direct-drive motor two-axis milling head.
Specifications Standard Accessories
The Company reserves the right to change, with all the technical specifications of the contract-based technology.
HEIDENHAIN TNC-640 controllers (X, Y, Z, B, C-five-axis Continuous).HEIDENHAIN Handwheel –HR520Control system: control system power with HEIDENHAIN filter protection circuit.European 2-axis milling head TCH-19(A63).European system of vertical spindle HSK A-63 24000RPM.HSK A-63 30 tools magazine.X /Y Linear motor direct driven.12 roller linear guideways ( 4 sets for X / Y / Z axes ).4 HEIDENHAIN linear scale ( 2 sets for X-axis, 1 sets for Y / Z axes ).Electrical cabinet temperature control device.X/Y Linear motor cooler.The spindle cooler.Cutting oil-mist device.Front-type chip conveyor containing iron filings cars each 1 style.Front and rear working door safety interlock (each type).Waterproof work said light.Machine all zero, parts and a variety of instrumentation unit of measurement used in all meta International System of Units (SI) standards.Guards complete workspace security concept, according toISO 12100-1 & -2 1992.Electrical cabinet with a variety of electrical protection, filtration and ventilation installations and air-conditioning systems.Machine standard color.
Specifications /Mold Unit Compact B2516
Compact B2522
Compact B3222
Travel
X-axis (Longitudinal) mm 1600 2200 2200
Y-axis (Cross) mm 2500 2500 3200
Z-axis (Vertical) mm 1250 1250 1250
Table
Table size mm 2500 x 1600 2500 x 2200 3200 x 2200
Table load Kg/m² 4000 4000 4000
Distance between spindle nose mm 250~1500 250~1500 250~1500
Distance between column mm 3250 3250 3950
Feedrate
Drive mode X/Y/Z Linear motor / Linear motor / Double ball screw
X/Y/Z-axis rapid feedrate m/min 60 / 60 / 50
Auto tool changer
Tool shank HSK A63 HSK A100
Tool magazine capacity / opt. Pcs 30 / 60 30 / 60
Max. tool weight Kgs 8 15
Max. tool length mm 350 350
Max. tool dimensions mm Ø 75 Ø 125
TCH-19(A100)TCH-19 (A63)
Compact B Compact B
Compact B
13 14
Gantry Type High Speed 5-axis Machine Center
Gantry Type.Column one piece design.X/Y - Axis linear motor drive.Rapid feedrate:60m/min.Box in Box symmetrical designDirect-drive motor two-axis milling head.Modular design milling head.
Aircraft Industry Aluminum FrameAutomotive Industry Stamping dieMechanical component
High rigidity columnThe column is one-piece design, high rigidity high vibration resistance, to ensure that the machine can reach excellent cutting performance and dynamic performance.
Linmax B Linmax B
Series
Linear Motor Drive:High speed / High accuracy.
Back lash free high positioning accuracy.Free of wear due to friction free drive concept.Fewer parts(reduce ball screw / nut, bearings couplings)Simple structure / long-term accuracy / easy maintenance
Advantage of Linear Motor:
Perfect solution
The expansion of hot or cold temperature does not interfere with the center, so this system can be ensured to have the excellent precision during working hours.
More StabilityMore PrecisionMore Strength
hot temperaturecold temperature
Box in Box symmetrical designMinimize environmental and temperature influence.
LINEAR MOTOR DRIVE
Linear Motor D.D. Motor Box in Box
Linmax B
15 16
Specifications /Mold Unit Linmax B-22 Linmax B-25 Linmax B-30 Linmax B-35 Linmax B-40
X-axis(Longitudinal) mm 3200/4000
(or more)4000/5000(or more)
5000/6000(or more)
5000/6000(or more)
6000/8000(or more)
Y-axis (Cross) mm 2200 2500 3000 3500 4000
Z-axis (Vertical) mm 1250 1250 1250 1250 1250
Table long mm 3200/4000(or more)
4000/5000(or more)
5000/6000(or more)
5000/6000(or more)
6000/8000(or more)
Table load Kg/m² 5000
Distance between spindle nose mm 200-1450 200-1450 200-1450 200-1450 200-1450
Distance between column mm 3250 3590 4090 4590 5090
Feedrate
X/Y/Z-axisrapid feedrate m/min 60 / 60 / 50
Milling Head Type Unit TCH-20(A63)
TCH-19(A63)
TCH-19(A100)
TCH-20(A100) TCH-100A
Tool shank type HSK A63 HSK A100
Tool magazine capacity / opt Pcs 30 / 60 30 / 60
Max. tool weight Kgs 8 15
Max. tool length mm 350 350
Max. tool dimensions mm Ø 75 Ø 125
Milling Head (B&C Axis) Torque motor driver
TCH-19(A63)
TCH-19(A100)
TCH-20(A63)
TCH-20(A100) TCH-100A
Rotation speed B &C Rpm(360°/S) 50/50 50/50 50/50 50/50 -
Max. torque: B &C Nm 1100 / 900 1100 / 900 1400 / 1300 1400 / 1300 -
Clamping torque: B &C Nm 4000/4000 4000/4000 4000/4000 4000/4000 -
Measuring resolution B &C Arc.sec ±3/±3 ±3/±3 ±3/±3 ±3/±3 -
Rotation angle B&C +/- ± 100°/ ±240° ± 100°/ ±240° ± 100°/ ±240° ± 100°/ ±240° -
Spindle
Tool Shank HSK A63 HSK A100 HSK A63 HSK A100 HSK A100
Max. Speed rpm 24,000 15,000 24,000 15,000 15,000
Spindle Power S1-100% (S6-40%) kw 42 (55) 50 (65) 42 (55) 50 (65) (34)
Spindle Torque S1-100% (S6-40%) Nm 67 (87) 96 (124) 67 (87) 96 (124) (160)
Direct-drive motor two-axis milling head. SpecificationsMachine specfication
Automatic Tool Changer
Standard Accessories
The HEIDENHAIN TNC-640 controllers X, Y, Z, B, C Five axes simutaneous.HEIDENHAIN Handwheel-HR520.Control system: control system power with HEIDENHAIN filter protection circuit.European 2-axis milling head TCH-19(A63).European modular Two-axis milling heads.The European system of vertical spindle HSK A63 24000 rpm.HSK A63 30-tool magazine.X / Y axes linear motor direct driven .12 roller linear guideways ( 4 sets for X / Y / Z axes ).4 HEIDENHAIN linear scale ( 2 sets for X-axis, 1 sets for Y / Z axes ).Electrical cabinet temperature control device.X / Y axes linear motor cooling.The spindle cooler.Spindle oil mist lubrication system.Cutting oil-mist device.Spiral-type chip conveyor and rear-type chip conveyor containing iron llings cars front and rear working door safety interlock ( each type ).Waterproof work side light.All parts and a variety of instrumentation unit of measurement used in all meta international system of units ( SI ) standards.Guards complete workspace security concept, according to ISO 12100-1 & -2 1992.Electrical cabinet with a variety of electrical protection, ltration and ventilation installations and air-conditioning systems.Machine standard color.
TCH-19 (A100)TCH-19 (A63) TCH-20 (A63) TCH-20 (A100)TCH-100A
(Vertical Spindle) for 3-axis
Linmax B Linmax B
Linmax B
17 18
Gantry Type High Speed 5-axis Machine Center
Gantry Type.X/Y - Axis linear motor drive.Rapid feedrate:60m/min.Box in Box symmetrical designDirect-drive motor two-axis milling head.Modular design milling head.
Aircraft Industry TitaniumMechanical component
Linear motor drive:High speed / High accuracy.
Available 700Nm torque spindleSuitable for heavy duty milling application.
Back lash free high positioning accuracy.Free of wear due to friction free drive concept.Fewer parts(reduce ball screw / nut, bearings couplings)Simple structure / long-term accuracy / easy maintenance
Advantage of Linear Motor:
Spindle change type
M70KSC
Milling Head B&C Axis M70KSC (Spindle change) TCH-30
Spindle Gear Driven Spindle Electrical Spindle
Rotation angle B&C +30°~ -100° / ±220°
± 100° ±240°
Tool Shank BT 50 HSK A63 HSK A100
Max. Speed rpm 3500 18000 12,000
Max.Spindle Power S1-100% (S6-40%) kw (22) 42 (55) 40 (50)
Max. Spindle Torque S1-100% (S6-40%) Nm (700) 67 (87.5) 248 (314)
TCH-30
Direct-drive milling head.Mechnical milling head.
With high rigidity designBox in Box symmetrical design
Cross-sectional area increased:Column:30% Crossbeam:50% Ram:30%
The column is one-piece design, high rigidity high vibration resistance, to ensure that the machine can reach excellent cutting performance and dynamic performance.
Specifications
Linmax B plus Linmax B plus
Series
Linear Motor D.D. Motor Box in Box
Linmax BPlus
Specifications /Mold Unit Linmax B plus-35 Linmax B plus-40Travel
X-axis (Longitudinal) mm 5000/6000 (or more)
6000/8000 (or more)
Y-axis (Cross) mm 3500 4000Z-axis (Vertical) mm 1250 1250Table
Table length mm 5000/6000 (or more)
6000/8000 (or more)
Table width mm 3200 3700Table load kg/m2 5000 5000Feed rateX/Y/Z-axis rapid feed rate m/min 50Automatic Tool ChangerMilling Head type 4
Tool shank type BT 50 / HSK A63 / HSK A100Tool magazine capacity pcs 30
19 20
Double gantry type high speed 5-axis machine centerDouble Gantry Type.X/Y/Z-axis Linear Motor Drive.Direct-drive motor two-axis milling head.
Double Gantry TypeGantry type design, all axial components (X / Y / Z / B/ C axis) is movement on the top of the column. The work piece is fixed on the table so that the weight of the work piece does not affect the machine performance.European advanced FEM analysis and design optimization for higher rigidity and response.
High speed crossbeamX/Y/Z-axis Linear motor drive
Back lash free high positioning accuracy.Free of wear due to friction free drive concept.Fewer parts(reduce ball screw / nut, bearings couplings)Simple structure / long-term accuracy / easy maintenance
Advantage of Linear Motor:
X/Y/Z- Axis is driven by a linear motor drive ,the advantage is no backlash, no wear and tear, easy maintenance, and extended service life.
SpecificationsSpecifications /Mold Unit Linmax Twin
Travel
X-axis (Longitudinal) mm 12000 or more
Y-axis (Cross) mm 4000 5000
Z-axis (Vertical) mm 1500
Table
Table length mm 12000 or more
Table width mm 3700 4700
Table load kg/m2 5000
Feed rate
X/Y/Z-axis rapid feed rate m/min 40 30
Automatic Tool Changer
Milling Head type MTK TCH 20 TCH 20 TCH 30
Tool shank type BT 50 HSK A63 HSK A100
Tool magazine capacity pcs 40 30 20
M120KMilling Head (B&C Axis) Torque motor driver M120K TCH-20
(A63)TCH-20(A100) TCH-30
Rotation angle B&C +/- +30°~-110°±360°
± 100° ±240°
± 100°±240°
± 100° ±240°
Spindle
Tool Shank BT 50 HSK A63 HSK A100 HSK A100
Max. Speed rpm 4,000 24,000 15,000 12,000
Spindle Power S1-100% (S6-40%) kw (37) 42 (55) 50 (65) 40 (50)
Spindle Torque S1-100% (S6-40%) Nm (1,200) 67 (87) 96 (124) 248 (314)
TCH-30
Direct-drive milling head.Mechnical milling head.
Aircraft Industry Extra-large,Extra-long Components
Mechanical component
Linmax Twin Linmax Twin
Series
High torque crossbeamY-axis by dual electronic servo preload rack and pinion system.Can eliminate backlash,and loaded with Heidenhain (Heidenhain) optical scale, to ensure longevity and precision machinery
Linear Motor D.D. Motor
Linmax Twin
21 22
Moving Column Type 5-Axis Profile Machine CenterDual electronic servo preload rack and pinion system.Rapid feedrate:60m/minFixed base column moving.Direct-drive motor two-axis milling head.Multiple gantries.
Fixed table
Dual electronic servo preload rack and pinion system.
Direct-drive motor two-axis milling head.
Each side using two high rigidity linear guideways (X axis of 4), very stable and high accuracy.
X-axis driven by rack and pinion system, with electronic backlash eliminating technology. By combining a high-grade decelerator with a high accuracy rack and pinion drive, this provides high precision, no backlash, low noise, low maintenance, and extended service life.
Modular design:easy maintenance-<TCH-20>.Fewer parts(reduce gear / belt)Free of wear due to friction free drive concept.Simple structure / long-term accuracy / easy maintenanceSymmetric “open frame” innovative design made in GGG40 nodular cast iron for head.Double row crossed roller bearing support achieving excellent rigidity and accuracy for B/C axis.Using high‐resolution, high‐precision encoder for B/C axis.
Aircraft Industry Floor Beams,Extrusion Profiles,Long & Narrow Components
SpecificationsSpecifications Unit JET-3 JET-5
Gantry ea 1 2 or more
Travel
X-axis (Longitudinal) mm 8000 / 15000 / or more
Y-axis (Cross) mm 1000 1300
Z-axis (Vertical) mm 700 760
Table
Table length mm 8000/15000 or more
Table width mm 750
Max. Table loading kg/m2 300
Feed rate
X/Y/Z-axis rapid feed rate m/min 60/60/40
Automatic tool changer
Tool shank HSK A63
Tool magazine capacity pc 20 or more
Specifications are subject to change without notice.
Milling Head (B&C Axis) Torque motor driver TCH-20(A63) TCH-L13
Rotation angle B&C +/- ± 100°/ ±240° ±105° / ±250°
Spindle
Tool Shank HSK A63 HSK A63
Max. Speed rpm 24,000 24,000
Spindle Power S1-100% (S6-40%) kw 42 (55) 28 (33)
Spindle Torque S1-100% (S6-40%) Nm 67 (87) 39 (56)
TCH-20(A63) TCH-L13
Jet Jet
Series
D.D. Motor
JET
23 24
Horizontal 5-Axis Machining CenterCross beam moves up and down, milling optimal rigidityOne Piece H Type ColumnHydrostatic rotary tableShort Throat Depth Tilting Milling Head
Cross beam moves up and downmilling optimal rigidity
Hydrostatic rotary table
One Piece H Type Column
Z-axis motion is controlled by a traversable crossbeam with vertical up and down movement. The spindle (Z-axis) movement is in the same direction as the machine crossbeam movement and precision machining quality is ensured along the whole of the Z-axis travel whether the cutting tool is close or far from the worktable. Additionally, the vertical and horizontal double-frame structure design increases rigidity, reduces vibrations, and provides machining stability.
Rotary table diameter: 1700mm,configured Hydrostatic Transmission to achieve heavy-loading, high rigidity, high precision, low friction coefficient, good resistance with vibration by film of oil, almost no wear and tear with guideway to ensure its accuracy and rigidity.
Can make simulation Five-axis machining. Way of driven (two motors with a reducer) : Using the same pump to provide each oil cells, and adjusting the pressure by the throttle. And it can automatically adjust by the loading from outside, so its efficiency is much higher.
For structural rigidity and constant precision along the entire Z-axis vertical stroke.
Z-Axis Design with Vertically. Traversable Crossbeam.
Aircraft Industry Engine CasingsMechanical component Bevel Gear Wheels,Gearboxes
Model Unit Rhino1250
Rhino1700
Rhino2200
Travel
X-axis (Longitudinal) mm 2200
Y-axis (Cross) mm 2250
Z-axis (Vertical) mm 1400
Rotary Table (C-Axis)
Table Size mm Φ 1250 Φ 1700 Φ 2000
Feed Rate
X/Y/Z Axis Rapid Feed Rate m/min 24 / 24 / 24
Automatic tool changer
Tool Shank BT 50
Tool Magazine Capacity pc 40
Specifications
Swing Milling Head (Gear type Continuous head) Rhino-M Rhino-EM
Rotation angle (B-Axis) deg +40°/ -120° +40°/ -120°
Spindle
Tool Shank BT 50 HSK A100
Max. Speed rpm 4000 1200
Max. Spindle Power S6-40% kw 37 40
Max. Spindle Torque S6-40% Nm 1200 246
Short throat depth tilting milling headB-Axis with 1200Nm Mechanical Transmission Spindle Spindle Speed 4000rpm
Rhino Rhino
Series
25 26
Double column 5-Axis Machining Center
Z-axis movement by two high rigidity box-wayEuropean high torque 2-axis milling head with high torque spindleHigh rigidity one-piece base and columnSuitable for high hardness materials of aerospace industry.
Aircraft Industry Automotive Industry
Mechanical component Heavy-Duty Machining
SpecificationsSpecifications Unit Saber-2230 Saber-2840 Saber-3450
Travel
X-axis (Longitudinal) mm 3000 / 4000 / 5000 3000 / 4000 / 5000 5000 / 6000 / 8000
Y-axis (Cross) mm 2250 2850 3450
Z-axis (Vertical) mm 800 800 1000
Distance between column mm 1800 2400 3000
Table
Table size mm 3000 x 1600 4000 x 2000 5000 x 2600
Table load kg 10000 12000 16000
Spindle
Spindle Power (S6-40%) 37
Spindle Torque (S6-40%) rpm 1200
Speed (max) kw 4000
Feedrate
X/Y/Z-axis rapid feedrate m/min 24 / 24 / 15
Automatic tool changer
Tool shank BT 50
Tool magazine capacity pc 40
Saber Saber
Series
Saber
27 28
Double column 5-Axis Machining Center
One-piece h-type column structureHeavy duty roller type linear guidewayZ-axis Moving crossbeam European imported high torque 2 axis milling head
One-pieceH-type column structure
Z-axis Moving crossbeam
Heavy duty roller type linear guideway
Best rigidity & constant precisionComplete structural stress reliefLong-term accuracy and stability
Increasing structrual rigidityMinimizing ram overhang vibrationAchieving the best machining quality
Large span design supportDriven by high power servo motorThe best efficiency & stability
SpecificationsSpecifications Unit Titan-2230 Titan-2840 Titan-3450
Travel
X-axis (Longitudinal) mm 3,000 /4,000 / 5,000 3,000 / 4,000 / 5,000 5,000 / 6,000
Y-axis (Cross) mm 2,250 2,850 3,450
Z-axis (Vertical) mm 850 1,000 Z-axis 800/1,000
W-axis mm - - 1,000
Distance between column mm 1,800 2,400 3,000
Table
Table size mm 3,000 × 1,600 4,000 x 2,000 5,000 x 2,600
Table load(MAX) kg 10,000 12,000 16,000
Spindle
Spindle Power (S6) kw 37
Spindle Torque (S6) Nm 1,200
Speed(max) rpm 4,000
Feedrate
X/Y/Z-axis rapid feedrate m/min 24 / 24 / 24 24 / 24 / 15 / 15
Automatic tool changer
Tool shank BT 50
Tool magazine capacity pc 40
Titan Titan
Series
Aircraft Industry
Mechanical component Heavy-Duty Machining
Titan
29 30
Gantry Type High Speed 5-axis Machine CenterMoving column type 5-axis machine centre.Spacious Working Area.Dual electronic servo preload rack and pinion system.European High Torque mechanical transmission Milling Head.1,200Nm high torque spindle.
Spacious Working Area
Dual electronic servo preload rack and pinion system.
All the axes of this machine (X/Y/Z/B/C axis) can travel along the moving column. Also the fixed worktable design ensures this machine is suitable for heavy-duty cutting, high precision and large component machining, and also provides a spacious working area.
X/Y-axis driven by rack and pinion system, with electronic backlash eliminating technology. By combining a high-grade decelerator with a high accuracy rack and pinion drive, this provides high precision, no backlash, low noise, low maintenance, and extended service life.
Mechanical component Heavy-Duty Machining
European high torque mechanical Transmission auto Indexing milling headHigh rigidity gear drive, providing a more powerful output.Index milling head up 144 positions every 2.5 ° indexing by automatic rotation(optional: 360 Location indexing every 1 ° or 5 ° per 72 positions), provide producers in processing on flexible use.
SpecificationsSpecifications Unit Loader-33 Loader-43 Loader-53
Travel
X-axis (Longitudinal) mm 8000 or more
Y-axis (Cross) mm 4300 5300 6300
Z-axis (Vertical) mm 1200 1500 1500
Distance between column mm 3300 4300 5300
Table
Table length mm 8000 or more
Table width mm 2800 3300 4300
Feedrate
X/Y/Z-axis rapid feedrate m/min 30 / 30 / 20
Automatic tool changer
Tool Shank BT 50
Tool magazine capacity pc 40
Loader Loader
Series
31 32
Moving column mobile crossbeam type 5-axis machine centres
Moving column mobile crossbeam type 5-axis machine centres.Spacious Working Area.W-axis Crossbeam moves up and down.Dual electronic servo preload rack and pinion system .European High Torque mechanical transmission Milling Head.1,200Nm high torque spindle.
Specifications
Specifications Unit Giant-33 Giant-43 Giant-53
Travel
X-axis (Longitudinal) mm 8000 or more
Y-axis (Cross) mm 4300 5300 6300
Z-axis (Vertical) mm 1200 1500 1500
W-axis mm 1500 2000 2000
Distance between column mm 3300 4300 5300
Table
Table length mm 8000 or more
Table width mm 2800 3300 4300
Feedrate
X/Y/Z-axis rapid feedrate m/min 30 / 30 / 20
X/Y/Z-axis cutting feedrate m/min 10
Automatic tool changer
Tool Shank BT 50
Tool magazine capacity pc 40
Aircraft Industry
Mechanical component Heavy-Duty Machining
Giant Giant
Series
Giant
33 34High torque - milling head specifications High torque - milling head specifications
Mechnical transmissin 2 axis milling head
Milling Head (Gear type Continuous head) M70KM70KSC
M120K LI100Mechanical Electrical
Tool shank BT-50 BT-50 HSK-A63 BT-50 BT-50
A-axis NA NA NA NA ±120°
B-axis +110˚ / -30˚ +30˚ / -100˚ +30˚ / -100˚ +30˚ / -110˚ NA
C-axis ±220° ±220° ±220° ±360° ±120°
Max. speed rpm 5000 3500 18000 4000 4000
Spindle torque S6-40% Nm 700 700 87.5 1200 1200
Spindle power S6-40% kw 22 22 55 37 46
LI100M120KM70K M70KSC
RecommendedMechnical transmissin 2 axis milling head
Machine / Milling Head M70KM70KSC-M M70KSC-E
M120K LI100Mechanical Electrical
- -
- - - -
- - -
- - -