Ashghal Cad Standards Manual

AutoCAD Layering Conventions

Public Works Authority TSD/EIS Version 1.0

AUTOCAD LAYERING STANDARDS Version 1.0

March 5, 2007



Acknowledgement This Standard represents the extensive effort and support of many individuals

within Public Works Authority. Technical Services Department expresses

appreciation of the valuable assistance given by the Directors, Managers and

Head of departments. Without the co-operation, the extensive work involved in

compiling background information and preparing the standards would not be

possible.

We would also like to place on record our appreciation of the assistance

rendered to us by the coordinators and our respective staffs. Who also rendered

valuable advice and guidance in bringing these standards to completion and in

editing the text for publication.

Special thanks to Director of Building Affairs

Director of Drainage Affairs

Director of Roads Affairs



Document Control Version Date Modified by Agency Purpose Version 1.0 March 5, 2007 Ashghal

Additions/Revisions This standard is intended to be neither static nor all-inclusive and thus will be updated and enhanced as appropriate. Suggestions for improvements are strongly encouraged so that subsequent updates will reflect the input and needs the current format will undergo versioning or changes when new technologies become available. Addendum to these standards will be issued when such changes are made. In general, changes to this standard shall occur because of three primary factors: 1) additional users and functionality; 2) discovery of, and subsequent fixing of latent errors and omissions; 3) changes to utilize advantage of more current technology and software versions. Therefore, it is reasonable to expect updates to this document. Users are cautioned to inquire about changes within. In order to ensure the reader is using the latest version, a revision date will be shown in the document control.



AutoCAD layering STANDARDS: Control and Authorization The Standards are under Technical Services Department Management

Document Title : AutoCAD layering Standards.

Date : March 5th 2007

Document Owner : ASHGHAL

Document Coordinator : Ibraiz Mohamed Khan

AutoCAD layering STANDARDS: Distribution

The Master or Original Version of the AutoCAD Layering Standards is held

electronically in ASHGALS Technical Services Department. The copy of these

AutoCAD Layering Standards will be available on our website

(www.Ashghal.gov.qa or www.Ashghal.com) PWA department directorates, and

Contracts Engineering and Business Affairs

AutoCAD Layering STANDARDS: Authorization and Change These standards will undergo continuous reviews and updates, subject to

change, by the Management of ASHGHAL. Any changes or updations that occur

will be announced on our website (www.Ashghal.gov.qa or www.Ashghal.com).



Coordinators from the respective departments Nasser Rashid Essa Al-kuwari Technical Services Department

Ibraiz Mohamed Khan Technical Services Department

Chandrakant Pawar Technical Services Department

Abdul Khaliq Technical Services Department

Hassan Al Sadig Technical Services Department

Abdulla Ahin Roads Affairs

Mario Domingo Roads Affairs

Yasser Noor Drainage Affairs

Mustafa Mughrabi Drainage Affairs

Sameh Mousa Town Beautification

Fouad Frangieh Town Beautification

Wael Mohd Abdul Salam Building Affairs



Table of Contents 1 INTRODUCTION ................................................................................................................................ 7

1.1 Objective .................................................................................................................................... 7 1.2 Scope ......................................................................................................................................... 8 1.3 Users .......................................................................................................................................... 8

2 DEFINITIONS AND ACRONYMS ................................................................................................... 8

3 GUIDELINES ...................................................................................................................................... 9

4 GENERAL REQUIREMENTS........................................................................................................ 10

4.1 Conditions of Compliance...................................................................................................... 10 4.2 Standards for Attribute data .................................................................................................. 11 4.3 Plans Submittal requirements and procedures .................................................................. 12

5 AVAILABLE INFORMATION ........................................................................................................ 14

5.1 Layer Manager ........................................................................................................................ 16 5.1.1 Layer Name Layout....................................................................................................... 17

5.2 Location Map, Direction and Scale ...................................................................................... 18 5.3 Legends.................................................................................................................................... 19 5.4 Details content......................................................................................................................... 20

6 COORDINATE SYSTEMS.............................................................................................................. 21

7 PRECISION ...................................................................................................................................... 21

8 DATA SUBMISSION STANDARDS ............................................................................................. 22

9 CONTACT : ...................................................................................................................................... 24

10 APPENDIX 1.0 - LAYERING STANDARDS - BUILDING MECHANICAL........................... ......25

11 APPENDIX 2.0 - LAYERING STANDARDS BUILDING STRUCTURAL ..29

12 APPENDIX 3.0 - LAYERING STANDARDS BUILDING ELECTRICAL ..32

13 APPENDIX 4.0 - LAYERING STANDARDS - BUILDING ARCHITECTURAL

FEATURES.................................................................................................................................. 37

14 APPENDIX 5.0 - BUILDINGS ATTRIBUTES......................................................................... 40

15 APPENDIX 6.0 - LAYERING STANDARDS - DRAINAGE .................................................. 66

16 APPENDIX 7.0 - DRAINAGE ATTRIBUTES.......................................................................... 79

17 APPENDIX 8.0 - LAYERING STANDARDS - ROADS........................................................ 121

18 APPENDIX 9.0 - ROADS ATTRIBUTES ............................................................................... 133

19 APPENDIX 10.0 - TOWN BEAUTIFICATION LAYERING STANDARDS - 165

20 APPENDIX 11.0 - TOWN BEAUTIFICATION ATTRIBUTES........................................... 169



Introduction

Ashghal Technical Services Department aims to service all the departments

within Ashghal, outside government organizations and public organizations. It

has recognized that all work flow have some common characteristics, enabling

them potentially to achieve a level of interoperability through the use of common

standards for various functions. Ashghal - EIS have initiated to identify these

functional areas and develop appropriate specifications for implementation of

AutoCAD layering STANDARDS. It is intended that such standards and

specifications will enable interoperability between heterogeneous workflow and

improved integration of workflow, thereby improving the opportunities for the

effective use of workflow process within Ashghal and the outside domains.

Ashghal is committed however to enforcing the standards of information delivery

that insures predictability and the ability to easily reuse information. As a result

these AutoCAD layering STANDARDS will be included as part of the contractual

requirement for delivery of digital information to Ashghal

These standards describe AutoCAD layering STANDARDS to be adopted on

projects from design to construction.

1.1 Objective

The purpose these standards are to promote compatibility and interchange of

digital spatial data between Ashghal and the clients. This will facilitate seamless

integration between AutoCAD and Geographic Information System and, to assist

those responsible for incorporating this disparate data into GIS to ensure easier

data translation, common language, ease of data storage, common medium of

information exchange, drawings and data can be transferred and integrated with

other applications, drawings and data created for one particular project or project

discipline are compatible with those for others.



1.2 Scope

The scope of this document is to provide guidelines and procedures for adopting

AutoCAD layering standards in preparing design and As-built drawings, where

these drawings will be automated to GIS. These standards address layer

assignments, standard symbology, layers, layer names, attributes to each

feature, templates, color usage associated with line widths for all mechanical,

electrical, structural, architectural drawings associated with buildings, roads,

drainage and city beautification drawings.

1.3 Users

The intended users of this Auto CAD layering Standards are anyone who is going

to be involved in design or construction projects for Ashghal, including the

Ashghal staff, consultants, contractors, Sub Contractors, Construction

companies, Project engineers, Discipline engineers and draftsperson

2 Definitions and Acronyms

ABD Abandon AR Architectural As-BUILT Measured and revised drawings documenting the Full

extent of completed works. AutoCAD AutoCAD 2006 or later B Building BA Building Affairs C Construction CAD Computer Aided Drafting CON Continuous CTRL Control D Drainage DA Drainage Affairs DE Design DWG Default AutoCAD drawing file format E Electrical EIS Engineering Information System Ex Existing F Furniture



G Gas GIS Geographic Information System HID Hidden Layout Defined drawing space in AutoCAD for placing Title sheets etc. Me Mechanical Model Space Defined drawing space in AutoCAD. O Oil PPLN Policy Plan Pr Proposed PWA Public Works Authority QNG Qatar National Grid RA Road Affairs RD Roads SEW Sewer ST Structural T Telephone TB Town Beautification TBi Town Beautification Irrigation TBL Town Beautification Landscaping TSD Technical Services Department U Presentation and Plans W Water XREF An external drawing file that is referenced into the

main drawing Z Core layers .

3 Guidelines

These AutoCAD layering standards (see Appendixes) are to be applied for all the

projects concerning design and As-built projects.

Through out this document the use of the name AutoCAD implies AutoCAD release 2006 unless otherwise specified.

As-Built drawings include design & detail changes that may have taken place

after the initial issue of construction documents, as well as changes made to the

actual facility during construction



The drawings will be electronic using the AutoCAD version 2006. All CAD

drawings are to be drawn using an AutoCAD program capable of reading and

writing drawing files in AutoCAD DWG format without conversion.

Ashghal will provide consultants and contractors an AutoCAD template (see fig

2.0 as an example) on a CD- ROM with project boundaries containing policy plan

and topographic features as base map (site Plan) which are geo referenced as

per QNG (Qatar National Grid). All the features of the projects must be drawn

onto that template only.

It is the responsibility of the client to organize drawing information coherently as

mentioned in the standard and maintain reasonable file size

4 General Requirements

4.1 Conditions of Compliance

All Consultants and contractors are required to meet the specifications of the

AutoCAD layering Standards set by Ashghal, as part of their conditions of

engagement.

In the AutoCAD template provided the user shall use the specific layering

STANDARDS by selecting which ever layer is applicable for the feature / entity

by switching on the necessary layers.

The Cad files provided will be in AutoCAD 2006 file format. Fonts and line types are to be followed as provided in this manual. Plot style table Is to be maintained as provided in this manual No external reference to be used. Multiple drawings shall not be contained in model space



Files shall be purged. Drawing features / entities should be in model space. The color and linetype of each entity is drawn BYLAYER.. All fonts used in the AutoCAD files shall be SHX type font. True type fonts

will not be accepted. If text is used to represent an object then the

insertion point must be middle center justified. In the standards all the

text is mentioned as continuous.

All polygons shall be closed polylines. File name should accurately be named to identify it is a design or As-built

project

Do not place entities on layer 0. File size should be within reasonable limits.

4.2 Standards for Attribute data

1. All attribute information features must be provided as Extended Entity Data (EED / XDATA) or OBJECT DATA for polyline features.

2. The Required Feature Attribute Table Fields associated with the

corresponding layer are mentioned in the appendices. For example,

FEATURE NAME

LAYER NAME

DESCRIPTION FEATURE TYPE

REFERENCE ATTRIBUTE

Flush Kerb RD_EX_KBFL Existing Road Feature: Flush Kerb

Polyline 4

3. The Template provided by Ashghal does not contain the fields for the layer, so the contractor must add ALL the fields as mentioned in the attribute table for the particular layer.

4. All the relevant information associated to the feature must be completely

filled as per the lookup table provided herein. For example



Attributes 4: (Kerb) FIELD NAME DESCRIPTION FIELD

TYPE FIELD WIDTH

VALUE

Proj-Num Project Number C 6 Zone # Zone Number N 3 Code Feature Code C 6 KERB Kerb Concrete edging

between pavement and carriageway

C 2 SK = Standing Kerb RK = Raised Kerb DK = Drop Kerb FK = Flush Kerb

4.3 Plans Submittal requirements and procedures

1. Site plan or Floor plan

The Floor Plan or Site Plan must include:

A. Building outline with dimensions.

B. Interior partitions(s) with dimensions.

1. Label all rooms and spaces as to use.

2. Label all rated walls and partitions - exterior and interior.

C. Show all openings in interior and exterior walls.

D. Show opening in floor/ceiling assemblies with dimensions.

2. Elevation drawings

A. Elevation drawings are required on all construction and include

alterations or additions to the exterior of building or structures.

B. The elevation drawings are orthographic drawings (a single view of

an object done with perpendicular lines or right angles) of the

exterior of a building, road, drainage or structure. Show the design,

materials, dimensions and final appearance of the exterior of a

building or structure. Including doors, windows, roof style,

overhang, dimension height and width, and grade line.



3. Sectional Drawings

Sectional drawings are required on all internal construction of a building,

or structure and also where ever applicable for drainage and roads

features.

A. Structures will require a drawing prepared for the entire structure

(full section).

B. All projects will require drawings for specific parts of the building,

roads or drainage (detail sections).

C. Sections should expose the size and shape of building materials

and components not revealed on floor plans.

D. Detail sections should include

1 Vertical wall section exterior show the material and

dimensions of material used to construct the wall. Including

exterior wall covering.

2 Vertical wall section interior show the material and

dimensions of material used to construct the wall.

3 Footing section show the width and length of the footing, the

type material used and the position of the foundation wall on

the footing and dimension of foundation wall. Detail any

change in elevation (i.e. step-downs).

4 Sill section show how the foundation supports and intersects

with floor system and the outside wall. Anchor bolts should be

addressed in sill section.

5 Beam details show how the floor system is supported by

beam and how columns or foundation walls support the beam.

6 Cornice section show the relationship between the outside

wall, top plate, and rafter construction. Details finish materials.



7 Stairway section show the dimensions of treads and risers

and includes handrail detail.

NOTE: Site Plan or Floor Plan and Elevation Plans are to be geo referenced.

5 Available Information

Ashghal provides base map (Site Plan) with Policy Plan, Roads networks and

Coastline in model space with project location and project boundaries. (See

Figure.1.0).

Example of an AutoCAD template

Figure 1.0



Project boundaries are drawn as polylines. All area polylines shall be closed (Note: project limits are roughly drawn and must not be used for final calculations of quantities or alignments).

Information which can be used as reference data in carrying out project. The following entities are included in the table below.

Feature Layer Name Attribute Data 1 Control Points GIS_CTRL Full details

(e.g., station name, E,N, height, accuracy ratings, Etc)

2 Policy Plan GIS_PPLN None 3 Zone GIS_ZONE None 4 Streets GIS_RD00-03 None 5 Coastline GIS_CSTL None

All elements are in two coordinates(X, Y,) except for control point which is

in (X, Y, Z). Where ever applicable benchmarks/control points are shown,

the coordinates and mapped points of these control points must be

submitted with the final work. The control points are placed in stable areas

where there is a little chance of them being destroyed.

Standards to be used or adhered in the preparation of design and as-built project drawings:

o Drawing layout dimension, title box details, etc. o Standard symbols, line types and annotations/labels o Layering Standards (see detailed layering Standards In Appendix

8.0 )



5.1 Layer Manager

Layering standards are classified in the layer manager as layers (see figure 2.0

as an example) The users shall select the layers for the appropriate feature /

entity which has layer name, linetype, color, line weight. All possible attribute

data for each feature / entity is also provided. (See appendixes)

Figure 2.0



5.1.1 Layer Name Layout

The methodology in defining Layer name is mentioned below

Field 1 = Department designator Field 2 = Status / Section Designator Field 3 = Feature / Entity Designator

Department designator is the primary field which identifies the department. The

status or section field differentiates proposed or existing stage of the project. The

Feature designator signifies the features name.

For Example see below tables.

Layer Name Line Type

Line Wt Acad Color Usage

D_Ex_SEW _ABD A 0 0.18 30 Abandon sewer line

D = Department Ex_SEW = Section / status ABD = Feature

Layer Description Color Line Type B_AR_ACCESS Main Gate RED Continuous

B = Department AR = Section ACCESS = Feature

Layer Description Color Line Type Thickness Symbol

TB_L_ Trees Tress large & small Black TB = Department L = Section Trees = Feature

Layer Description Color Line Type RD_De_KBDR Design road Feature: Dropper Kerb Green Hidden RD = Department De = Status KBDR = Feature



5.2 Location Map, Direction and Scale

All the necessary project details are provided on the paper space template with

Location Map, arrow showing the North direction and Scale. (See Figure 3.0)

Figure 3.0



5.3 Legends

Lists of legends are listed in the template which is available (see figure 4.0)

Figure 4.0



5.4 Details content

Title Block (see figure 5.0)

PWA Block. Consultant Block Contractor Block, Project title Project Code Sheet Contents, Scale Date, Project Coordinator, Drawing number Project concerned department

Figure 5.0



6 Coordinate Systems

Coordinates used are in meters based on the Qatar National Grid (QNG), which

is a Transverse Mercator Projection (See table below):

Central Meridian 51 13' 00" E Scale Factor at the Central Meridian

0.99999

Location of the Origin 51 13' 00" E 24 27' 00" N False Easting of the Origin 200,000 m False Northing of the Origin 300,000 m Reference Spheroid International (Hayford)

The vertical datum is the Qatar National Datum, which is defined by mean sea

level in Doha

7 Precision

Coordinates are stored in double precision (15 significant digits). Given the

coordinate system defined above, all Easting and Northing will carry 6 digits

before the decimal. Thus, the coordinate resolution (precision) for vector data is 9

significant digits after the decimal1.



8 Data Submission Standards

These guidelines are to be observed and followed by all the users who submit the AutoCAD files to Public Works Authority Ashghal for Design, and As-built drawings. They are intended to support and maintain uniformity. Note: All drawing files must conform to the AutoCAD layering standards set forth in this document. Clients will submit to Ashghal a complete set of the project in Electronic form. These must include all the supporting files and must be delivered as follows. File may be submitted to Ashghal digitally using one of the following methods. On CD RW disks. Disk media should be packed into a container for ease of handling and storage and protected against damage during handling. Disk media Both the CD-ROM case and the CD-ROM itself shall be labeled with. The project name and number

Short description of the media content i.e. As-Built, detail drawings, shop drawings etc The name, address, and phone number of the Consultant etc

The name of the project Manager The date of issue of the disk Date of submittal Virus Scanned (date & software used)

Media Number: x of xx An index file (in Microsoft Word format) describing the contents of the submission shall be provided. The index file should include:

The project name and number The name, address and phone number of the consultant. The name of the Ashghal project manager for that particular project The date of issue of the submission The project code (alphanumeric as above)

The index shall be comprised of a table with one row for each AutoCAD file in the submission. The column should represent: The name of the AutoCAD file.

The name of the compressed file in which the file is contained (if applicable).



The disk on which the AutoCAD (or compressed) files can be found (if applicable). The project code as assigned to the consultant or contractor by Ashghal.

The title of the drawing as it appears in the title block The date of issue of the drawing. If the submission comprises more than one disk, the same index file should accompany each disk. A printed version of the index should accompany the transmittal. Each AutoCAD file must be in AutoCAD DWG format. DXF format is not acceptable. Clients shall submit in the disk media all the files in a directory structure as follows Folder: As-built drawing (GIS AutoCAD template) Folder: Details drawings Folder: Documents As-built: The Final As-Built drawings will reside Detail Drawings: All other detailed drawings related to that particular project will reside Documents: Project related Word or PDF documents will reside

As-Built Detail Drawings Documents

Project Number



9 Contact :

Clients shall direct their comments, queries or any additional training needs regarding these AutoCAD layering standards to Public Works Authority - Ashghal Technical Services Department Engineering Information System Nasser Rashid Essa Al-kuwari Tel No : 4950500 Ibraiz Mohamed Khan Tel No: 4950174



10 Appendix 1.0 - Layering Standards - Building Mechanical

Building

Layer Name

Line type

Line weight

Color

Symbol

Description

B_HVAC_AHU CON Default 140 NA Air Handling Unit B_HVAC_CH CON Default 140 NA Chiller Unit B_HVAC_C_P CENTER Default 138 Chiller Pipe B_HVAC_CHP CON Default 137 NA Chilled Water

Pumps B_HVAC_CiP CON Default 137 NA Circulating Pumps B_HVAC_Cond HIDDEN Default 132 NA Cond drain pipe B_HVAC_DAC CON Default 137 NA Standard Air

Conditioning Details

B_HVAC_DDC CON Default 138 NA Direct Digital Control of Building System

B_HVAC_DG CON Default 138 NA Door Grill B_HVAC_DIM CON Default 132 NA HVAC Dimension B_HVAC_Duct CON Default 139 NA Main Duct B_HVAC_EF CON Default 138 NA Extract Fan B_HVAC_Edu CON Default 132 NA Exhaust Duct B_HVAC_ExD HIDDEN Default 133 NA Existing Duct B_HVAC_FD CON Default 132 NA Floor Drain B_HVAC_Fs CON Default 132 NA Air Conditioning

Fittings B_HVAC_FlD CON Default 132 NA Flexible Duct B_HVAC_nAC CON Default 137 NA Standard Note Air

Conditioning B_HVAC_OP CON Default 139 NA Access Opening B_HVAC_RD CON Default 137 NA Return Diffuser B_HVAC_ReP HIDDEN Default 139 NA Refrigerant Pipes B_HVAC_RG CON Default 137 NA Return Grille B_HVAC_SD CON Default 137 NA Supply Diffuser B_HVAC_SG CON Default 137 NA Supply Grille B_HVAC_SAC CON Default 140 NA Split Air



Building

Layer Name

Line type

Line weight

Color

Symbol

Description

Conditioning B_HVAC_Dm CON Default 137 NA Dummy Diffuser B_HVAC_VAV CON Default 137 NA Variable Air VolumeB_HVAC_BMS CON Default 137 NA Building

Management System

B_HVAC_DDC CON Default 137 NA Direct Digital Control of Building System

B_HVAC_FCU CON Default 137 NA Fan Coil Unit B_HVAC_ILF CON Default 137 NA Inline Fan B_HVAC_VCD HIDDEN

2 Default 132 NA Volume Control

Damper B_HVAC_TXT CON Default 137 NA Air Conditioning

Text B_HVAC_WAC CON Default 140 NA Window Air

Conditioning B_HVAC_ED CON Default 138 NA Extract Diffuser B_MeD_CP CON Default 138 NA Catch Pit B_MeD_Det CON Default 132 NA Standard Drainage

details B_MeD_DIM CON Default 131 NA Standard Drainage

dimensions B_MeD_eDRL HIDDEN Default 134 NA Existing Drainage

layout internal B_MeD_eHT HIDDEN Default 135 NA Existing holding

tank B_MeD_eST HIDDEN Default 135 NA Existing Septic

Tank B_MeD_ESVC CON Default 139 NA External drainage

piping B_MeD_FD CON Default 138 NA Floor Drain B_MeD_FG CON Default 138 NA Floor Gully B_MeD_HT CON Default 139 NA Holding Tank B_MeD_MH CON Default 140 NA Manhole internal

within the perimeter of the building

B_MeD_MPVC CON Default 138 NA Common Pipe



Building

Layer Name

Line type

Line weight

Color

Symbol

Description

drawings B_MeD_pDRL HIDDEN Default 134 NA Existing drainage

layout internal B_MeD_pMH HIDDEN Default 134 NA Proposed manhole

internal B_MeD_pST HIDDEN Default 134 NA Proposed Septic

tank B_MeD_RSA CON Default 139 NA Rain water

soakaway B_MeD_SAAC CON Default 137 NA Air-Conditioning

soakaway B_MeD_SP CON Default 137 NA Sump pumps B_MeD_SSA CON Default 139 NA Septic tank

soakaway B_MeD_ST CON Default 139 NA Septic tank B_MeD_TXT CON Default 137 NA Standard drainage

text B_MeD_UPVC CON Default 138 NA Internal drainage

piping B_MeP_CWS CON Default 138 NA Cold Water Supply B_MeP_EWH CON Default 140 NA Electric Water

Heater B_MeP_EWT CON Default 140 NA Elevated Water

Tank B_MeP_eEWT HIDDEN Default 135 NA Existing Elevated

Water Tank B_MeP_eFP CON Default 135 NA Existing Fire

Pumps B_MeP_eGWT HIDDEN Default 135 NA Existing Ground

Water Tank B_MeP_eIWS CON Default 135 NA Existing Internal

Water Supply B_MeP_eMWS DIVIDE Default 135 NA Existing Main

Water Supply B_MeP_eRWT HIDDEN Default 135 NA Existing Roof Water

Tank B_MeP_eWME HIDDEN Default 137 NA Exiting Water Meter

Enclosure B_MeP_eWP CON Default 135 NA Existing Water

Pumps



Building

Layer Name

Line type

Line weight

Color

Symbol

Description

B_MeP_FF CON Default 132 NA Fire Fittings B_MeP_GWT CON Default 140 NA Ground Water TankB_MeP_DIM CON Default 132 NA Plumbing

Dimension B_MeP_HWR DASHDO

T Default 138 NA Hot Water Return

B_MeP_HWS HIDDEN Default 138 NA Hot Water Supply B_MeP_PF CON Default 132 NA Plumbing Fittings B_MeP_RWT CON Default 140 NA Roof Water Tanks B_MeP_SN CON Default 131 NA Sprinkler Nozzle B_MeP_SBL CON Default 138 NA Sprinkler Branch

Pipe B_MeP_SMPL Center Default 140 NA Sprinkler Main Pipe

Line B_MeP_TXT CON Default 137 NA Standard Plumbing

Text B_MeP_VC CON Default 138 NA Valve Chamber B_MeP_WME CON Default 140 NA Water Meter

Enclosure B_MeP_WP CON Default 137 NA Water Pumps



11 Appendix 2.0 - Layering Standards Building Structural

Building

Layer Name

Line type

Line weight

Color

Symbol

Description

B_ST-Grids Center2 Default 8 NA Grid Line B_ST-Grids Text

CON Default Green NA Grids Text

B_ST-Circle CON Default Red NA Slab Thickness Circle

B_ST-Columns

CON Default Green NA Columns

B_ST-Column SC

CON Default Green NA Stub Column

B_ST-Column PC

CON Default Green NA Planted Column

B_ST-Footings

CON Default White NA Footings

B_ST-Blinding

CON Default Magenta NA Blinding

B_ST-Bitu Hidden2 Default Green NA Bitumen B_ST-Polythene

CON Default Red NA Polythene Sheet

B_ST-Plan CON Default Magenta NA Plan B_ST-Beams CON Default Magenta NA Beams B_ST-Steps CON Default Magenta NA Stairs B_ST-Reinf 1 CON Default Blue NA Reinf B_ST-Reinf 2 CON Default Green NA Reinf B_ST-Reinf C CON Default Magenta NA Cross Reinf B_ST-Bott Reinf

CON Default Green NA Bottom Reinf

B_ST-Top Reinf

Hidden2 Default Green NA Top Reinf

B_ST-Section 1

CON Default Magenta NA Sections

B_ST-Section 2

CON Default Magenta NA Sections

B_ST-Steel Col

CON Default Magenta NA Steel Columns

B_ST-Steel CON Default Magenta NA Steel Beams



Building

Layer Name

Line type

Line weight

Color

Symbol

Description

Beam B_ST-Rafter CON Default Magenta NA Rafter B_ST-Plates CON Default Magenta NA Plates B_ST-Angels CON Default Magenta NA Angels B_ST-Welds CON Default Magenta NA Welds B_ST-Purlins CON Default Magenta NA Purlins B_ST-Sheeting

CON Default Yellow NA Sheeting

B_ST-Ribs Hidden2 Default 8 NA Ribs B_ST-Mesh CON Default Green NA Mesh Reinf B_ST-Bolts CON Default Red NA Bolts B_ST-Hatch 1

CON Default Red NA Hatch

B_ST-Hatch 2

CON Default Cyan NA Hatch

B_ST-Col-H CON Default 9 NA Column Hatch B_ST-Solid CON Default 253 NA Solid B_ST-Text 1 CON Default White NA Text B_ST-Text 2 CON Default Green NA Text B_ST-Beam Text

CON Default White NA Beam Text

B_ST-Slab Text

CON Default White NA Slab Text

B_ST-Col Text

CON Default Green NA Columns Text

B_ST-Foot Text

CON Default Green NA Footings Text

B_ST-Dim CON Default Red NA Dimensions B_ST-Dim L CON Default Red NA Dim Leader B_ST-Dim C CON Default Red NA Dim Columns B_ST-Dim F CON Default Red NA Dim Footings B_ST-Dim Slab

CON Default Red NA Dim Slabs

B_ST-Dim Beam

CON Default Red NA Dim Beams

B_ST-Dim Sect

CON Default Red NA Dim Sections

B_ST-Level 1 CON Default Magenta NA Level in plan



Building

Layer Name

Line type

Line weight

Color

Symbol

Description

B_ST-Level 2 CON Default Magenta NA Level in Sections B_ST-Boulders

CON Default Red NA Boulders

B_ST-Concrete

CON Default Red NA Concrete

B_ST-Sand CON Default Red NA Sand B_ST-Block Work

CON Default Red NA Block Work

B_ST-Earth CON Default 8 NA Earth B_ST-Sect Mark

CON Default Magenta NA Section Mark in Plan

B_ST-Hidden Hidden2 Default Red NA Misc Hidden Line B_ST-Grid Circle

CON Default Yellow NA Grid Circle

B_ST-Notes CON Default Magenta NA Notes B_ST-Wall CON Default Magenta NA Walls



12 Appendix 3.0 - Layering Standards Building Electrical

Building

Layer Name

Line type

Line weight

Color

Symbol

Description

B_E-LF CON Default White NA Light Fittings B_E-SL CON Default White NA Light Fittings &

E.FAN switches B_E-LFCL CON Default Yellow NA Light Fittings

control line B_E-CL dashed Default Yellow NA Elect. Circuit line B_E-POWER CON Default White NA All low power+ AC

outlets, isolators B_E-FCO CON Default Magenta NA Flexible cable

outlets B_E-WH CON Default Magenta NA Elect. Water

heaters B_E-CCU CON Default Magenta NA Elect. Cooker

control unit B_E-EXF-CF CON Default Magenta NA Elect .Extract fans,

ceiling fans B_E-CBPB CON Default Cyan NA Elect. Call bell &

push button B_E-MSCR center Default Green NA Main & sub-main

cbles routes B_E-LEGEND

CON Default White NA Electrical symbols

B_E-GNT CON Default Yellow NA Electrical general notes/text

B_E-LFSMR CON Default Yellow NA Light fittings schedule/Model reference

B_E-MSB-DB CON Default White NA Electrical main switch or distribution board

B_E-DBB CON Default Red NA Electrical Distribution Board Block

B_E-DBD CON Default Yellow NA Electrical Distribution Board Details



Building

Layer Name

Line type

Line weight

Color

Symbol

Description

B_E-SLD CON Default White NA Electrical single line diagram

B_E_SPST dashed Default White NA Small power skirting, trunking

B_E-CTR dashed Default Blue NA Electrical cables tray route

B_E-CTGR center Default Blue NA Electrical cables trunking route

B_E-CPANEL CON Default Cyan NA Electrical cubical panel

B_E-BBR CON Default Magenta NA Electrical bus bar riser

B_E-CD center Default White NA Cable ducts B_E-MH CON Default Cyan NA Electrical manhole B_E-CP CON Default Blue NA Electrical control

panels B_E-CJB CON Default Yellow NA Electrical cables

junction box B_F-HSD CON Default White NA Fire heat & smoke

detectors B_F-ETS CON Default Green NA Fire extinguishers B_F-AB-CP CON Default Red NA Fire Alarm bell &

call point B_F-AMP CON Default Green NA Fire Alarm Main

panel B_F-HR CON Default White NA Fire Hose reel B_F-MDS dashed Default White NA Fire Main dry riser B_F-SPLER CON Default Cyan NA Fire Sprinklers B_F-ES CON Default Magenta NA Fire Exit sign B_F-RSCD CON Default Red NA Fire resisting self

closing doors

B_F-EM-L CON Default Green NA Fire Emergency lights

B_F-BK CON Default White NA Fire Blanket B_F-EL CON Default Magenta NA Fire Escape ladder B_F-GNT CON Default Yellow NA Fire General

notes/text B_F-SC center Default white NA Fire system cables



Building

Layer Name

Line type

Line weight

Color

Symbol

Description

B_F-CJB CON Default Blue NA Fire Cables junction box

B_PA-SPK CON Default white NA Speakers B_PA-APF CON Default Green NA Amplifier B_PA-MIC CON Default Magenta NA Microphone B_PA-MIX CON Default Green NA Amplifier Mixer B_PA-CPR CON Default Cyan NA Cassette

player/Radio B_PA-GNT CON Default Yellow NA P.A System

General notes/text B_PA-VC CON Default Red NA P.A System

Volume control B_PA-SC dashed Default White NA P.A System cables B_PA-CJB CON Default Blue NA P.A System cables

junction box B_L-LIEP CON Default White NA Lightning inspection

earth pit B_L-LCTR dashed Default Green NA Lightning conductor B_L-LPETP CON Default Red NA Lightning protection

Earth test point B_L-LER CON Default Yellow NA Lightning earth rod B_L-LGNT CON Default Yellow NA Lightning General

notes/text B_CCTV-CA CON Default White NA CCTV Camera B_CCTV-OC CON Default Green NA CCTV Object

Censor B_CCTV-M CON Default Magenta NA CCTV Monitor B_CCTV-R CON Default Green NA CCTV Recorder B_CCTV-VR CON Default Cyan NA CCTV Video

Display & Recorder B_CCTV-MP CON Default Yellow NA CCTV Main control

panel B_CCTV-GNT

CON Default Yellow NA CCTV General notes/text

B_CCTV-SC center Default White NA CCTV System cables

B_CCTV-CJB CON Default Blue NA CCTV Cables junction box

B_CCTV- CON Default White NA CCTV Motion



Building

Layer Name

Line type

Line weight

Color

Symbol

Description

MDD detector devices B_CCTV-SAC

CON Default Magenta NA CCTV Security Access control panel

B_CCTV-PGB

CON Default White NA CCTV Car parking gate barrier

B_TV-CCO CON Default White NA TV Coaxial cable outlet

B_TV-CDA CON Default Green NA TV/Cable/Dish Antenna

B_TV_GNT CON Default Magenta NA TV General Notes / Text

B_TV-SP CON Default Magenta NA TV splitter B_TV-CJB CON Default Blue NA TV cables junction

box B_TV-SC Dashed Default White NA TV system cables B_TV-SDB CON Default Green NA TV system

Distribution Board B_TV-CR CON Default White NA TV cables Riser B_TEL-CT DASH Default Yellow NA Telephone cable

trays B_TEL-O CON Default White NA Telephone outlets B_TEL-MJB CON Default Green NA Telephone main

junction box B_TEL-BWL Center Default Yellow NA Telephone block

wiring line B_TEL-R CON Default Magenta NA Telephone Riser B_TEL-ADTS CON Default Cyan NA Access to

Development for tel. service

B_TEL-BL CON Default Green NA Building layout B_TEL-BLP CON Default Yellow NA Boundary layout of

the plot B_TEL-PSD CON Default Red NA Plots GIS sheet

data B_TEL-MID Center Default Magenta NA Q.tel main incoming

Duct B_TEL-PABX CON Default Blue NA Q.tel main PABX B_TEL-GNT CON Default Yellow NA Q.tel



Building

Layer Name

Line type

Line weight

Color

Symbol

Description

General notes/text B_TEL-MHJB CON Default White NA Telephone

manhole/joint box B_COMP-CT HIDDE

N Default Yellow NA Computer Cable

trays B_COMP-PI CON Default White NA Computer

point individual B_COMP-POB

CON Default Green NA Computer+Tel+power outlet box

B_COMP-PUF

Dashed Default Magenta NA Computer+Tel+powe under. floor trunking

B_COMP-MS CON Default Green NA Computer main server

B_COMP-GNT

CON Default Yellow NA Computer general notes/text

B_COMP-CJB

CON Default White NA Computer junction box

B_COMP-SCR

Center Default White NA Computer system cables route



13 Appendix 4.0 - Layering Standards - Building Architectural Features

Building

Layer Name

Line type

Line weight

Color

Symbol

Description

B_AR_ACESS CON Default Red NA Main Gates B_AR_ACESR CON Default Red NA door stopper, roll

holder, coat hooks, soap tray etc.

B-AR_BEXST CON Default 31 NA Existing Buildings B_AR_BPROP CON Default Green NA Proposed Building B_AR_BFUTR Hidde

n2 Default Yellow NA Future Building

B_AR_BWALL CON Default Yellow NA Boundary wall or Fence

B_AR_CARS CON Default Cyan NA Car blocks in Plans or Elevations

B_AR_COL CON Default Yellow NA Column Positions in Architectural Plans

B_AR_C-SHD CON Default 253 NA Column Hatch B_AR_DTLS CON Default Green NA Architectural

Details B_AR_DIM CON Default Cyan NA Dimension for Plan,

Elevation, Section &Detail

B_AR_DOORS CON Default Red NA Door Blocks B_AR_DTAGS CON Default Yellow NA References for

Door Elevations, Detail & Schedules

B_AR_ELEV1 CON Default White NA Nearest Elevation View

B_AR_ELEV2 CON Default Magenta NA Second Elevation View

B_AR_ELEV3 CON Default Yellow NA Third Elevation View

B_AR_ELEV4 CON Default Red NA Fourth Elevation View

B_AR_ELEV5 CON Default Cyan NA Fifth Elevation ViewB_AR_F-SAN CON Default Red NA Sanitary fittings for

Toilet Blocks, Baths & Kitchens



Building

Layer Name

Line type

Line weight

Color

Symbol

Description

B_AR_F- LTS CON Default Red NA Showing light Positions in Architectural Plan

B_AR_FURN CON Default Cyan NA Furniture Layout B_AR_FRFIN CON Default Yellow NA Floor Finishing

Schedule & Descriptions

B_AR_GRIDS Center2

Default Cyan NA Grid Lines

B_AR_GDNOS CON Default Yellow NA Grid References B_AR_HATCH CON Default Red NA Different Hatch

Patterns B-AR_H-SLD CON Default 253 NA Solid Hatch Pattern B_AR_HIDN Hidde

n2 Default Red NA Show all dotted

lines B_AR_ILOCK CON Default 14 NA Paving tiles

(Interlock) B_AR_K-STN CON Default Red NA Kerb Stone Layout B_AR_L-GRN CON Default 96 NA Green Area (Grass

etc.) B-AR_L-SRB CON Default 96 NA Shrubs B_AR_L-TRS CON Default 96 NA Trees B_AR_LGNDS CON Default Yellow NA Legends, Symbols

References etc.. B_AR_PRCL Cente

r2 Default Green NA Policy Plan

B_AR_PARKG CON Default Cyan NA Parking Area B_AR_PEL CON Default Cyan NA People Blocks in

Plans or Elevations B_AR_PLAN CON Default White NA Floor Plans B_AR_STAIR CON Default Yellow NA Stair Case & Steps

in Plan B_AR_CEILG CON Default Cyan NA Reflecting Ceiling

Plan B_AR_IMAGE CON Default Cyan NA Place For Images B_AR_ROOF1 CON Default Magenta NA Highest Level For

Roofing B_AR_ROOF2 CON Default Yellow NA Second Level For

Roofing B_AR_ROOF3 CON Default Red NA Third Level For



Building

Layer Name

Line type

Line weight

Color

Symbol

Description

Roofing B_AR_ROOF4 CON Default Cyan NA Fourth Level For

Roofing B_AR_SECT CON Default White NA Architectural

Sections & Details B_AR_S-EL1 CON Default Yellow NA Nearest Elevation

in Sections B_AR_S-EL2 CON Default Red NA Far Elevation in

Sections B_AR_TEXT1 CON Default Magenta NA Title, References

Text etc.. B_AR_TEXT2 CON Default Yellow NA Labeling Text B_AR_T-NTS CON Default Yellow NA General Notes B_AR_T-CRD CON Default Yellow NA Coordinates Text B_AR_T-LVL CON Default Yellow NA Floor, Elevation or

Section Levels B_AR_TILES CON Default 8 NA Floor Tiles B_AR_URBAN CON Default Cyan NA GIS Data B_AR_WNDOW

CON Default Red NA Window Blocks

B_AR_WTAGS CON Default Yellow NA References for Window Elevations, Details & Schedules



14 Appendix 5.0 - Buildings Attributes

Buildings Mechanical, Electrical, Structural, Architectural

Feature Name

Layer Name Description Feature Type

ReferenceAttribute

Buildings B-AR_BEXST Existing Buildings Polyline 1 Buildings B_AR_BPROP Proposed

Buildings Polyline 1

Buildings B_AR_BFUTR Future Buildings Polyline 1 Elevation B_AR_ELEV Elevations Polyline 2 Roofing B_AR_ROOF Roofing Polyline 3 Sections B_AR_SECT Sections Polyline 4

Accessories B_AR_ACESR Accessories like door stopper etc

Polyline 5

Doors B_AR_DOORS Doors fixtures Polyline 6 Sanitary B_AR_F-SAN Sanitary fittings Polyline 7 Lighting B_AR_F-LTS Light Fittings Polyline 8 Furniture B_AR_FURN Furniture Polyline 9 Parking B_AR_PARKING Vehicle Parking Polyline 10

Windows B_AR_WINDOWS Windows Polyline 11 Walls B_AR_WALL Walls Polyline 12

Columns B_AR_C-SHD Columns Polyline 13 Steps B_AR_STEPS Stair case and

Ramps Polyline 14

Tiles B_AR_TILES Floor Tiles Polyline 15 Columns B_ST-COLUMNS Columns Polyline 13

Circle B_ST-CRICLE Slab thickness Polyline 16 Steps B_ST-STEPS Stair case and

ramps Polyline 14

Blinding B_ST-BLINDING Blinding Polyline 13 Angles B_ST-ANGLES Angles Polyline 18

Columns B_ST-Column_ST Stub column Polyline 13 Columns B_ST-Column_PC Planted Column Polyline 13 Footings B_ST-Footings Footings Polyline 13 Rafter B_ST-Rafter Beams Polyline 13 Purling B_ST-Purlins Bolts Polyline 13 Levels B_AR_T-LVL Level of Floors Polyline 21

Block Work B_ST-BLOCKWORK

Block Works Polyline 22

Wall B_ST-WALL Walls Polyline 12 Lighting B_E_LF Light Fittings Polyline 8

Fan B_E-SL Fan Switches Polyline 23



Feature Name


ReferenceAttribute

Power B_E-POWER Low Power outlets, Ac outlets,

isolators

Polyline 24

Fans B_E_EXF-CF Exhaust fans, Ceiling Fans

Polyline 43

Switch Board B_E_MSB-DB Main Switch Board or Distribution

Board

Polyline 25

Distribution Board

B_E_DBB Electrical Distribution Board

Block

Polyline 26

Cable ducts B_E_CD Cable ducts Polyline 27 Manhole B_E_MH Manhole Polyline Ref Roads Detectors B_F-HSD Fire Heat and

Smoke detectors Polyline 28

Extinguishers B_F-ETS Fire Extinguishers Polyline 29 Bell B_F-AB-CP Alarm bell and call

Point Polyline 30

Alarm B_F-AMP Fire Alarm Main Panel

Polyline 31

Sprinkler B_F-SPLER Fire Sprinklers Polyline 32 Lighting B_F-EM-L Fire Emergency

Light Polyline 33

Air Handling Unit

B_HVAC_AHU Air Handling unit Polyline 39

Chiller B_HVAC_CH Chiller Unit Polyline 40 Floor Plan B_AR_PLAN Floor plan Polyline 40.1

Pipe B_HVAC_ChP Chilled Pipe Polyline 41 pump B_HVAC_CHP Chilled water

pump Polyline 42

Pump B_HVAC_CiP Circulating Pumps Polyline 42 Fan B_HVAC_EF Exhaust fan Polyline 43 Duct B_HVAC_ED Exhaust Duct Polyline 44 Duct B_HVAC_ExD Existing Duct Polyline 44

Air Condition B_HVAC_Fs Air Conditioning Fittings

Polyline 45

Duct B_HVAC_FID flexible Duct Polyline 44 Diffuser B_HVAC_RD Return Diffuser Polyline 46 Diffuser B_HVAC_SD Supply Diffuser Polyline 46 Diffuser B_HVAC_ED Extract Diffuser Polyline 46 Diffuser B_HVAC_Dm Dummy Diffuser Polyline 46 Grille B_HVAC_RG Return Grille Polyline 46



Feature Name


ReferenceAttribute

Grille B_HVAC_SG Supply Grille Polyline 46 Air Condition B_HVAC_WAC Window Air

Conditioning Polyline 47

Air condition B_HVAC_SAC Split Air Conditioning

Polyline 48

Fan B_HVAC_FCU Fan coil unit Polyline 49 Heater B_MeP_WH Electric Water

Heater Polyline 50

Tank B_MeP_EWT Elevated water tank

Polyline 51

Tank B_MeP_eEWT Existing Elevated water tank

Polyline 51

Tank B_MeP_eGWT Existing ground water tank

Polyline 51

Tank B_MeP_eRWT Exixting Roof water tank

Polyline 51

Tank B_MeP_GWT Ground water tank Polyline 51 Sprinkler B_MeP_SN Sprinklers Nozzle Polyline 52 Sprinkler B_MeP_SMPL Sprinkler main

pipe line Polyline 53

Chamber B_MeP_VC Valve chamber Polyline Ref Drainage

Attributes 1; Existing, Proposed, Future Buildings Field Name Description Field

Type Field width

Reference Table

Owner Type of building C 50 1 Name Name of the Building C 50 Type_Code Sub Type of Building C 10 1.1 Area Area in Metre x Metre N 10 Length Length in Metre N 10 Width Width in Metre N 10 Height Height of the building N 10 No_Of_Floors No of floors of the

building N 5

Proj_No Project number N 5 Table 1 Value Description P Private



G Governmental Table 1.1 Type Type Code Description Schools SCEB Elementary Boys School SCEG Elementary Girls School SCPB Primary Boys School SCPG Primary Girls School SCSB Secondary Boys School SCSG Secondary Girls School SCDG Deaf Girls School SCNM New Model School SCHS Handicapped School SCPB Preparatory Boys School SCPG Preparatory Girls School SCIS Industrial School SCMS Model Schools SCNS Nursing School SCKG Kindergarten SCGT Gifted and Talented

School Mosques MODF Daily Friday MODA Daily MOIH Imam House MOEP Eid Praying Area MOMP Mens Praying Area MOLP Ladies Praying Area Medical Services MEPH Primary Health Centres MEDC Dental Clinics MEVC Veterinary Clinic MEHO Hospital MEDM Dermatology Clinic MEEM Emergency Medical

Services MECH Children Hospital MEPY Psychiatric hospital MEOP Out Patient clinic Central market CMFS Fisheries CMPM Poultry and Mutton CMVG Vegetable CMSH Slaughter House CMLS Live Stock CMBM Birds Market



Type Type Code Description Ports & Harbours PHCT Container Terminal PHIY Inspection yard PHST Staff Accommodation PHFH Fishing Harbour PHYH Yatch Hanger PHSD Sheds PHCH Cargo Handling Museums MUWM Weapons Museum MUQI Qatar Islamic Arts

Museum MUCT Traditional Costumes &

Textiles Museum MUQN Qatar National Museum Parks & Playgrounds PPLF Ladies and Family PPGP General Public PPPG Playgrounds Laboratories LASD Seeds LAFC Food Control LAMT Material LAPT Plant Tissue Culture LAGE Genetic Engineering LADL Drainage Laboratory LACM Chemical Materials LAAW Agriculture & Water

Research LARC Rodent Control LAMC Measurement &

Calibration



Attribute 2 : Elevations

Field Name Description Field Type Field width Reference Table

Type Type of elevation

C 50 2.1

Height Height of elevation

N 10

Dimension Dimensions N 10 Material Material used C 50 Material table Proj_No Project

number N 50

Table 2.1 Value Description Elev 1 Nearest Elevation Elev 2 Second Elevation Elev 3 Third Elevation Elev 4 Fourth Elevation Elev 5 Fifth Elevation

Attribute 3 : Roofing Field Name Description Field Type Field width Reference

Table Type Type of

roofing C 50 3.1

Height Height of roofing

N 10

Dimension Dimensions N 10 Material Material used C 50 Material TableProj_No Project

number N 15

Table 3.1 Value Description Roof 1 Highest Level for Roofing Roof 2 Second Level For Roofing Roof 3 Third Level For Roofing Roof 4 Fourth Level For Roofing



Attributes 4; Sections


Type Type of Section

C 50 4.1

Dimension Dimensions N 10 Num_Sec Number of

sections N 10

Material Material Used C 50 Material TableProj_No Project

number N 50

Table 4.1 Value Description SN Nearest Elevation in Sections SF Far Elevation in Sections VS Vertical Section FS Footing Section SS Sill section Attributes 5: Accessories Field Name Description Field Type Field width Value Type Type of

accessories Polyline 50

Material Material used Polyline 50 See Material table

Quantity Number of accessories

Polyline 15

Proj_No Project number

N 50



Attributes 6; Doors Field Name Description Field Type Field width value Type Type of door C 30 Material Material used C 30 See Material

table Thickness Thickness of

the door N 10

Height Height of the door

N 10

Quantity Total number of doors

N 10

Location Location of doors

C 30

Open_ Dim Opening dimension

N 10

Frame_Dim Frame dimension

N 10


N 50

Attributes 7: Sanitary fittings Field Name Description Field Type Field width value Manftr Manufacturer C 50 Sealing Sealing used C 25 Con_to Connected to C 15 Proj_No Project

number N 50

Attributes 8; Light Fittings Field Name Description Field Type Field width value Type Type of

lighting C 50

Position Position of the lighting

C 20

Power Power in voltage

N 10

Name Name of the lighting

C 20

Location Location fitted C 15 Proj_No Project

number N 50



Attributes 9: Furniture Field Name Description Field Type Field width value Type Type of

furniture C 50

Location Location C 25 Name Name of the

furniture N 15


N 50

Attributes 10: Parking Field Name Description Field Type Field width value Area Parking Area

m/s N 10

Capacity Capacity of vehicles

N 10

Location Location C 15 Proj_No Project

number N 50

Attributes 11: Windows Field Name Description Field Type Field width value Type Type of

window C 10

Material Material N 10 See Material table

Size Size of the window

C 25

Quantity Total number of windows

N 10

Location Location of the window

C 50

Opening_ Dim Opening dimension

N 10

Frame_ Dim Frame dimension

N 10


N 50



Attributes 12: Walls Field Name Description Field Type Field width value Type Type of wall C 50 Material Material C 10 See Material

table Height Height N 10 Thickness Thickness N 25 Proj_No Project

number N 50

Attributes 13: Column, Beams, Footings, Blinding, Rafter, purling Field Name Description Field Type Field width Reference

Table Type Type C 50 13.1 Material Material C 10 See Material

table Height Height of the

column N 10

Subtype Sub type of columns

C 5

Code Code used to identify

N 10


N 50

Table 13.1 Type Sub Type Code Columns Planted Column Pc Columns Stub Column Sc Columns Steel Column Stc Columns Reinforced Column Rc Beams Concrete Beam Cb Beams Steel Beam Sb Purling Pu Rafter Raf Blinding Bl Footings Fo



Attributes 14: Steps, ramps Field Name Description Field Type Field width Reference

Table Type Type C 10 Height Height of each

step N 10

No Steps Number of steps

N 25

Material Material C 50 See Material table

Width Width N 10 Proj_No Project

number N 50

Attributes 15: Tiles Field Name Description Field Type Field width Reference

Table Type Type C 10 Dim Dimension N 10 Material Material C 50 See Material

table Proj_No Project

number N 50

Attributes 16: Circle Field Name Description Field Type Field width Reference

Table Type Type C 50 Material Material C 10 See Material

table Dia Dimension in

diameter N 10


N 50



Attributes 18: Angles


Type Type C 50 Material Material C 10 See Material

table Angle Angle N 10 Length Length N 10 Proj_No Project

number N 25

Attributes 20: Bolts Field Name Description Field Type Field width Reference

Table Type Type of bolts C 10 length Length N 10 Total_No Total number

of bolts N 10


N 25

Attributes 21: Levels Field Name Description Field Type Field width Reference

Table Height Height of each

floor N 10

Tot_Floor Total number of floors

N 10

Floor_sec Number of sections per floor

N 10


N 25



Attributes 22: Block Work Field Name Description Field Type Field width Reference

Table Type Type C 10 Brand Brand C 10 Position location C 10 Proj_No Project

number N 25

Attributes 23: Light Fittings & Fan Switches Field Name Description Field Type Field width Reference

Table Type Type C 10 Brand Brand or

manufacturer C 10

Position Position or location

C 10


N 25

Attributes 24: Power Field Name Description Field Type Field width Reference

Table Power Voltage C Brand Name C 10 Position Location or

position C 10


N 25



Attributes 25; Main Switch or Distribution Board Field Name Description Field Type Field width Reference

Table Type Type C 10 Capacity Capacity in

volts N 10

Brand Brand C 10 Length Point to Point N 10 Material Material C 25 See Material

table Proj_No Project

number N 25

Attributes 26: Electrical Distribution Board Field Name Description Field Type Field width Reference

Table Type Type C 50 Capacity Capacity in

volts N 50

Brand Brand C 50 Material Material C See Material

table Location Location C 50 Proj_No Project

number N 25

Attributes 27: Cable Ducts Field Name Description Field Type Field width Reference

Table Type Type C 50 Capacity Capacity N 50 Brand Brand C 50 Location Location C 50 No_ETS Number N 10 Proj_No Project

number N 25



Attributes 28: Fire heat and smoke detectors Field Name Description Field Type Field width Reference

Table Type Type C 25 Capacity Capacity C 25 Manufacturer Manufacturer C 25 Temp Temperature N 10 Location location C 50 Smoke_Det Smoke

detector C 25

Heat_Det Heat detector C 25 No_Det Number of

detectors N 10


N 25

Attributes 29; Fire Extinguishers

Field Name Description Field Type Field width Reference

Table Location Location C 50 Type Type C 25 Name Name Character 25 Proj_No Project

number N 25

Attributes 30 : Alarm Bell Call Point Field Name Description Field Type Field width Reference

Table location Location C 50 Name Name N 15 Proj_No Project

number N 25



Attributes 31: Fire Alarm main panel Field Name Description Field Type Field width Reference

Table Type Type C 50 Dim Dimension N 15 Area Location C 50 Proj_No Project

number N 25

Attributes 32: Fire Sprinkler Field Name Description Field Type Field width Reference

Table Type Type C 50 Temp_rate Temperature

rate N 15


N 25

Attributes 33: Emergency lighting Field Name Description Field Type Field width Reference

Table Type Type C 50 Area Location N 15 Proj_No Project

number N 25



Attribute 39: Air Handling Unit Field Name Description Field Type Field width Reference

Table AHU_Ref Air handling

unit reference number

N 10

Type C 50 Area Area Served N 15 Supply_Air Supply Air

CFM9each0 N 50

Fresh_Air Fresh Air CFM(each)

N 50

Air_on_coil Air on coil N 15 Air_off_coil Air off Coil N 15 Coolin_Cap Cooling coil

capacity TR N 15

Water_Flow Water Flow in sgpm

N 15

External External St. Pr in (Wg)

N 15

Ent_Temp Entering water temperature

N 15

Leav_Temp Leaving water Temperature

N 15

Fan_Volt Fan motor voltage supply

N 15

Location Location installed

C 50


N 15



Attribute 40: Chiller Unit Field Name Description Field Type Field width Reference

Table Manufacturer Manufacturer

and model N 10

Type Type of air chillier

C 50

Num_unit Number of units

N 10

On_Coil On Coil condition

N 15

Off_Coil Off Coil condition

N 50

Capacity Capacity in TR

N 50

Cooler_Flow Cooler Flow USGM

N 15

Chill_In Chilled water in temperature

N 15

Chill_out Chilled water out temperature

N 15

Scale_Fact Scale factor N 15 Press_Drop Permissible

pressure drop across cooler (in ft)

N 15

Air_Cond Air on Condenser

N 15

Number Number of Compressors

N 15

Drive_Type Type of drive C 25 Motor_Type Type of Motor C 25 Location Location

installed C 25

Motor_Comp F L A of each compressor motor

C 25


N 15



Attribute 41; Chilled Pipe Field Name Description Field Type Field width Reference

Table Type Type C 50 Ref Table

10.1 Name Name C 50 Length Length of the

pipe C 50

Capacity Capacity of the pipe

N 50

Dimension Dimension C 50 Proj_No Project

number N 50

Attribute 42: Chilled water pumps, Circulating Pump Field Name Description Field

Type Field width Reference

Table Type Type of Water

Pump C 50

Manufacturer Manufacturer and model

N 10

Capacity Capacity of the water pump USGPM

N

Head Pump working head

N 15

Flow_Rate Flow rate N 25 In_Pres Pump inlet

pressure N 10

Out_Pre Pump Outlet pressure

N 10

Motor_Pow Motor power N 25 Location Location installed C 25 Num_Pump Number of Pumps N 25 Proj_No Project number N 15



Attribute 43: Exhaust Fan Field Name Description Field


Table Manufacturer Manufacturer and

model N 10

Type Type of Exhaust fan C 50 Area Area served N 15 Mot_Man Motor manufacturer N 15 Tot_Out Total Number of

Outlets CFM N 15

Tot_Stat Total Static pressure external

N 15

In_Pres Inlet Pressure N 15 Dis_Pres Discharge pressure N 15 Fan_Rpm Fan rpm N 15 Amp Amperes N 15 Volt Voltage N 15 Motor Motor Rpm N 15 Cap Capacitor N 15 Mot_Grov Motor sheaves & No

of Grooves N 15

Fan_Grov Fan sheaves & No of Grooves

N 15

Num_Tot Total Number of exhaust fans

N 25

Proj_No Project number N 15



Attribute 44: Exhaust Duct, Existing duct, Flexible duct Field Name Description Field

Type Field width Reference Table

Manufacturer Manufacturer and model

N 25

Type Type of Water Pump

C 50

Des_Vol Design volume m3/s

N 10

Size Duct Size mm N 10 Area Duct Area mxm N 10 Velocity Velocity m/s N 10 Pressure Static pressure N 10 Location Number of units N 10 Cor_Fact Correction Factor N 10 Num_units Total Number of

exhaust fans N 25

Proj_No Project number N 15 Attribute 45: Air Conditioning Fittings Field Name Description Field



model N 10

Type Type of Exhaust fan C 50 Area Area served N 15 Num_Tot Total Number of

exhaust fans N 25




Attribute 46 : Return diffuser, Dummy diffuser, Supply Diffuser, Return grille, Supply Grille, Extract diffuser Field Name Description Field



model N 25

Type Type of Water Pump C 50 Design Design N 10 46 1 Measured Measured 46.1.1 Location Number of units N 10 Cor_Fact Correction Factor N 10 Num_Ter Terminal Number N 25 Proj_No Project number N 15 Table GD 1 Value Description Free_Area Free Area in meter square Volume Volume in meter cube / s Table GD1.1 Value Description Velocity Velocity in meter square Volume Volume in meter cube / s Attribute 47: Window air conditioning Field Name Description Field Type Field width Reference


and model N 10

Type Duty of the Air Conditioner

N 50

Area Area served C 15 Num_Tot Total Number

of Window Air conditioner

N 25


N 15



Attribute 48: Split air conditioning Field Name Description Field



model N 10


N 50

Area Area served C 10 Capacity Nominal capacity N 10 Power Electrical supply

power N 10

Num_Tot Total Number of Split Air conditioner

N 10

Proj_No Project number N 15 Attribute 49: Fan coil Unit Field Name Description Field Type Field width Reference


model N 10


N 50

Area Area served C 10 Air_Cap Air Quantity CFM N 10 Air_Coil Air on Coil DB /

WB N 10

Cool_Coil Cooling coil capacity TR (BTU/HR)

N 10

Water_flow Water Flow N 10 Pressure External static

Pressure N 10

Num_Tot Total Number of Split Air conditioner

N 10




Attribute 50: Electric water heater Field Name Description Field



model N 10

Area Area served C 10 Capacity Nominal capacity N 10 Power Electrical supply

power N 10

Num_Tot Total Number of Water Heaters

N 10

Proj_No Project number N 15 Attribute 51: Water tank, Elevated water tank, existing ground water tank, existing roof water tank, ground water tank Field Name Description Field



model N 10

Area Area served C 10 Capacity Nominal capacity N 10 Num_Tot Total Number of

Water Tanks N 10

Proj_No Project number N 15 Attribute 52: Sprinkler nozzle Field Name Description Field


Table Type Type N 10 Material Material used C 15 See material

table Model Manufacturer and

model C 15

Size Radius of coverage N 10 Area Area served C 10 Capacity Nominal capacity N 10 Temp temperature N Num_Tot Total Number of

Sprinklers nozzles N 10




Attribute 53: Sprinkler main pipe line Field Name Description Field Type Field width Reference


and model N 10

Area Area served C 10 Capacity Nominal

capacity N 10

Length Length of the pipe

N 10


N 15

Attribute 40.1 Floor Plan or Site Plan Field Name Description Field Type Field width Reference

Table Dimension Dimensions C 10 Code Code for

doors, windows etc

C 20


N 15



Material Table Material Type Code Iron Ir Steel St PVC Pv Plastic Ps Gravel Gr Crushed Brick Ck Crushed Concrete Cc Hoggin Ho Quarry Waste Qw Tile Tl Brass Br Aluminium Al Copper Co Alloy Ay Wood Wo Cloth Cl Glass Gl Cement Ce Sand Sa Bitumen Bi Polythene Po Stone Sn Brick Bk Timber Tm Hallow blocks Hb Concrete Blocks Cb If others please specify in the attributes (material)



15 Appendix 6.0 - Layering Standards - Drainage

Drainage


Line Wt

Colour Symbol Description

D_Z_DIMS CON 0 RED Default Dimensioning D_Z_DWGSHT CON 1 WHITE Default Title Block D_Z_REV CON 2 YELLOW Default Revision Clouds and

Triangle D_Z_NORTH CON 4 GREEN Default North Point D_Z_SECMK CON 4 GREEN Default Section and Detail

Marks D_Z_18TEXT CON 0 RED Default Text at respective height D_Z_25TEXT CON 1 WHITE Default Text at respective height D_Z_35TEXT CON 2 YELLOW Default Text at respective height D_Z_50TEXT CON 3 GREEN Default Text at respective height D_Z_70TEXT CON 4 CYAN Default Text at respective height D_C_18OUT CON 0 RED Default All very thin outlines D_C_25OUT CON 1 WHITE Default All thin outlines D_C_35OUT CON 3 YELLOW Default All outlines in

plan/elevation D_C_50OUT CON 4 GREEN Default All concrete outlines in

section D_C_18PIPE CON 2 RED Default Pipe work

outlines/fittings D_C_18PIPEHID HID 3 RED Default Pipe work hidden lines D_C_50REBARS CON 4 GREEN Default Reinforcement details D_C_18GRID CEN 0 RED Default Grid lines/map grid lines D_C_18HATCH CON 0 RED Default All hatching D_C_25DASH DASH 1 WHITE Default Hidden detail D_C_25HID HID 1 WHITE Default Hidden detail D_C_Bund CON 2 YELLOW Default Bund outlines D_C-EXT_GRND DASH 1 WHITE Default Existing ground level D_C-FRL DASH 1 WHITE Default Finished road level D_C-PRO_COV_LEV

DASH 1 WHITE Default Proposed cover level

D_C-SEWER_SEC

CON 1 MAGENTA Default Pipe section

D_C-MH_SEC CON 1 MAGENTA Default Manhole section



Drainage


Line Wt


D_C-TEXT TEXT 1 WHITE Default Text D_C-TABLE TEXT 1 WHITE Default Tables D_EX_SEW_ ABD

CON 0 30 Default Abandon Sewer Lines

D_ EX_SEW_ RE CON 1 30 Default Refur/refined/Replaced Sewer Lines

D_EX_DAB CON 1 GREEN Default Existing Drainage Area Boundary

D_EX_SB CON 1 CYAN Default Site Boundary D_PR_DAB CON 1 GREEN Default Proposed Drainage

Area Boundary D_U_ELEC-OH CON Default WHITE Default Electrical Cable

Overhead D_U_ELEC-UG CON Default WHITE Default Electrical Cables

Underground D_U_HVOLT CON Default WHITE Default High Voltage Electrical

Cables D_U_LVOLT CON Default WHITE Default Low Voltage Electrical

Cables D_U_FENCE CON Default WHITE Default Fence Line D_U_TEL CON Default WHITE Default Telephone Line D_U_GAS CON Default WHITE Default Gas Line D_U_WATER CON Default WHITE Default Water Line D_U-OILPIPE CON Default WHITE Default Oil Pipelines D_U_FIBRE OPTIC

CON Default WHITE Default Fibre Optic/CCTV Cable

D_EX_SEWER DASH 1 RED Default Existing_sewer D_EX_SEW_DIR CON 1 RED Default Existing_sewer_flow

direction D_EX_SEW_ID TEXT Default GREEN Default Existing_sewer_id D_EX_SEW_DIA TEXT Default GREEN Default Existing_sewer_diamete

r D_EX_SEW_MAT

TEXT Default GREEN Default Existing_sewer_material

D_EX_SEW_LEN TEXT Default GREEN Default Existing_sewer_length D_EX_SEW_CUM_POP

TEXT Default GREEN Default Existing_sewer_cumulative_population

D_EX_SEW_HC_POP

TEXT Default GREEN Default Existing_sewer_connectiing_population



Drainage


Line Wt


D_EX_SEW_DS_MH

TEXT Default GREEN Default Existing_sewer_upstream_manhole

D_EX_SEW_US_MH

TEXT Default GREEN Default Existing_sewer_downstream_manhole

D_EX_MANHOLE

CIRCLE

1 MAGENTA Default Existing_manhole

D_EX_MH_ID TEXT Default GREEN Default Existing_manhole_id D_EX_MH_COV_LEV

TEXT Default GREEN Default Existing_manhole_cover level

D_EX_MH_INV_LEV

TEXT Default GREEN Default Existing_manhole_invert level

D_EX_MH_DEPTH

TEXT Default GREEN Default Existing_manhole_depth

D_EX_MH_TYPE TEXT Default GREEN Default Existing_manhole_type(ramp/bdrop)

D_EX_MANHOLE-1

CIRCLE

1 YELLOW Default Existing_manhole-1

D_EX_MH-1_ID TEXT Default GREEN Default Existing_manhole-1_id D_EX_MH-1_COV_LEV

TEXT Default GREEN Default Existing_manhole-1_cover level

D_EX_MH-1_INV_LEV

TEXT Default GREEN Default Existing_manhole-1_invert level

D_EX_MH-1_DEPTH

TEXT Default GREEN Default Existing_manhole-1_depth

D_EX_HOUSCON

DASH 1 ROSE Default Existing_house connection

D_EX_HC_ID TEXT Default GREEN Default Existing_house connection_id

D_EX_HC_DIA TEXT Default GREEN Default Existing_house conetion_diamtr

D_EX_HC_MAT TEXT Default GREEN Default Existing_house connection_material

D_EX_HC_LEN TEXT Default GREEN Default Existing_house connection_length

D_EX_HC_TYPE TEXT Default GREEN Default Existing_house con_type(ramp/bdrop)

D_EX_HC_STUB TEXT Default GREEN Default Existing_house connection_stub end

D_EX_RISINGMAIN

DASH 1 BLUE Default Existing_rising main

D_EX_RM_ID TEXT Default GREEN Default Existing_risingmain_id



Drainage


Line Wt


D_EX_RM_DIA TEXT Default GREEN Default Existing_risingmain_diameter

D_EX_RM_MAT TEXT Default GREEN Default Existing_risingmain_material

D_EX_RM_LEN TEXT Default GREEN Default Existing_risingmain_length

D_EX_PUMPINGSTATION

DASH 1 DARK RED Default Existing_pumping station

D_EX_PS_ID TEXT Default GREEN Default Existing_pumping station_id

D_EX_PS_COV_LEV

TEXT Default GREEN Default Existing_pumping station_cover level

D_EX_PS_INV_LEV

TEXT Default GREEN Default Existing_pumping station_invert level

D_EX_PS_DEPTH

TEXT Default GREEN Default Existing_pumping station_depth

D_EX_PS_CAPACITY

TEXT Default GREEN Default Existing_pumping station_pump capacity

D_EX_PS_HEAD TEXT Default GREEN Default Existing_pumping station_total head

D_EX_PS_SEW_INV

TEXT Default GREEN Default Existing_p/s_incomming sewer_invert

D_EX_PS_SEW_DIA

TEXT Default GREEN Default Existing_p/s_incomming sewer_diameter

D_EX_PS_SCADA

TEXT Default GREEN Default Existing_pumping station_SCADA System

D_EX_VALVE_CHAMBER

DASH 1 ORANGE Default Existing_valve chamber

D_EX_VC_ID TEXT Default GREEN Default Existing_valve chamber_id

D_EX_VC_COV_LEV

TEXT Default GREEN Default Existing_valve chamber_cover level

D_EX_VC_INV_LEV

TEXT Default GREEN Default Existing_valve chamber_invert level

D_EX_VC_DEPTH

TEXT Default GREEN Default Existing_valve chamber_depth

D_EX_VC_TYPE TEXT Default GREEN Default Existing_valve_type D_EX_VC_RM_DIA

TEXT Default GREEN Default Existing_valve_rising main _diameter

D_EX_FLOWMETER_CHAMBER

DASH 1 ORANGE Default Existing_flowmeter chamber



Drainage


Line Wt


D_EX_FM_ID TEXT Default GREEN Default Existing_flowmeter chamber_id

D_EX_FM_COV_LEV

TEXT Default GREEN Default Existing_flowmeter chamber_cover level

D_EX_FM_INV_LEV

TEXT Default GREEN Default Existing_flowmeter chamber_invert level

D_EX_FM_DEPTH

TEXT Default GREEN Default Existing_flowmeter chamber_depth

D_EX_FM_TYPE TEXT Default GREEN Default Existing_flowmeter_type D_EX_FM_RM_DIA

TEXT Default GREEN Default Existing_flowmeter_rising main _diameter

D_EX_SURGEVESSAL_CHAMBER

DASH 1 ORANGE Default Existing_surgevessal chamber

D_EX_SV_ID TEXT Default GREEN Default Existing_surgevessal chamber_id

D_EX_SV_COV_LEV

TEXT Default GREEN Default Existing_surgevessal chamber_cover level

D_EX_SV_INV_LEV

TEXT Default GREEN Default Existing_surgevessal chamber_invert level

D_EX_SV_DEPTH

TEXT Default GREEN Default Existing_surgevessal chamber_depth

D_EX_SV_TYPE TEXT Default GREEN Default Existing_surgevessal_capacity

D_EX_SV_RM_DIA

TEXT Default GREEN Default Existing_ surgevessal _rising main _diameter

D_EX_AIRVALVE_CHAMBER

DASH 1 ORANGE Default Existing_airvalve chamber

D_EX_AV_ID TEXT Default GREEN Default Existing_airvalve chamber_id

D_EX_AV_COV_LEV

TEXT Default GREEN Default Existing_airvalve chamber_cover level

D_EX_AV_INV_LEV

TEXT Default GREEN Default Existing_airvalve chamber_invert level

D_EX_AV_DEPTH

TEXT Default GREEN Default Existing_airvalve chamber_depth

D_EX_AV_TYPE TEXT Default GREEN Default Existing_airvalve_type D_EX_AV_RM_DIA

TEXT Default GREEN Default Existing_ airvalve _rising main _diameter

D_EX_WASHOUT_CHAMBER

DASH 1 ORANGE Default Existing_washout chamber



Drainage


Line Wt


D_EX_WO_ID TEXT Default GREEN Default Existing_washout chamber_id

D_EX_WO_COV_LEV

TEXT Default GREEN Default Existing_washout chamber_cover level

D_EX_WO_INV_LEV

TEXT Default GREEN Default Existing_washout chamber_invert level

D_EX_WO_DEPTH

TEXT Default GREEN Default Existing_washout chamber_depth

D_EX_WO_SUMP

TEXT Default GREEN Default Existing_washout_sump/mh

D_EX_WO_RM_DIA

TEXT Default GREEN Default Existing_ washout chamber_rising main _diameter

D_EX_DISCHARGE_CHAMBER

DASH 1 ORANGE Default Existing_discharge chamber

D_EX_DC_ID TEXT Default GREEN Default Existing_discharge chamber_id

D_EX_DC_COV_LEV

TEXT Default GREEN Default Existing_discharge chamber_cover level

D_EX_DC_INV_LEV

TEXT Default GREEN Default Existing_discharge chamber_invert level

D_EX_DC_DEPTH

TEXT Default GREEN Default Existing_discharge chamber_depth

D_EX_DC_RM_DIA

TEXT Default GREEN Default Existing_incomming _discharge chamber_ rising main _diameter

D_EX_DC_SEW_DIA

TEXT Default GREEN Default Existing_outgoing_ sewer _diameter

D_PR_SEWER CON 1 RED Default Proposed_sewer D_PR_SEW_DIR CON 1 RED Default Proposed_sewer_flow

direction D_PR_SEW_ID TEXT Default GREEN Default Proposed_sewer_id D_PR_SEW_DIA TEXT Default GREEN Default Proposed_sewer_diame

ter D_PR_SEW_MAT

TEXT Default GREEN Default Proposed_sewer_material

D_PR_SEW_LEN TEXT Default GREEN Default Proposed_sewer_length D_PR_SEW_CUM_POP

TEXT Default GREEN Default Proposed_sewer_cumulative_population

D_PR_SEW_HC_POP

TEXT Default GREEN Default Proposed_sewer_connectiing_population



Drainage


Line Wt


D_PR_SEW_DS_MH

TEXT Default GREEN Default Proposed_sewer_upstream_manhole

D_PR_SEW_US_MH

TEXT Default GREEN Default Proposed_sewer_downstream_manhole

D_PR_MANHOLE

CIRCLE

1 MAGENTA Default Proposed_manhole

D_PR_MH_ID TEXT Default GREEN Default Proposed_manhole_id D_PR_MH_COV_LEV

TEXT Default GREEN Default Proposed_manhole_cover level

D_PR_MH_INV_LEV

TEXT Default GREEN Default Proposed_manhole_invert level

D_PR_MH_DEPTH

TEXT Default GREEN Default Proposed_manhole_depth

D_PR_MH_TYPE TEXT Default GREEN Default Proposed_manhole_type(ramp/bdrop)

D_PR_MANHOLE-1

CON 1 YELLOW Default Proposed_manhole-1

D_PR_MH-1_ID TEXT Default GREEN Default Proposed_manhole-1_id D_PR_MH-1_COV_LEV

TEXT Default GREEN Default Proposed_manhole-1_cover level

D_PR_MH-1_INV_LEV

TEXT Default GREEN Default Proposed_manhole-1_invert level

D_PR_MH-1_DEPTH

TEXT Default GREEN Default Proposed_manhole-1_depth

D_PR_HOUSECON

CON 1 ROSE Default Proposed_house connection

D_PR_HC_ID TEXT Default GREEN Default Proposed_house connection_id

D_PR_HC_DIA TEXT Default GREEN Default Proposed_house connection_diameter

D_PR_HC_MAT TEXT Default GREEN Default Proposed_house connection_material

D_PR_HC_LEN TEXT Default GREEN Default Proposed_house connection_length

D_PR_HC_TYPE TEXT Default GREEN Default Proposed_house con_type(ramp/bdrop)

D_PR_HC_STUB TEXT GREEN Default Proposed_house connection_stub end

D_PR_RISINGMAIN

CON 1 BLUE Default Proposed_rising main

D_PR_RM_ID TEXT Default GREEN Default Proposed_risingmain_id



Draina