ACW435RBL4K

FeaturesSlim and wide body modelsPMMA opalised diffuserChassis and accessory metal surfaces treated & degreased, finished in a white polyester-epoxy powder coat and baked for unprecedented protection and highest quality finishEnergy efficient electronic control gearKnockouts for in-line mountingQuick and easy installationVEET/IPART approval (ACS435RBL4K, ACW420RBL4K, ACW435RBL4K)

ApplicationsOfficesBoardroomsSchoolsShowrooms / galleriesHotels / motels

OptionsDimmable: 1-10V / DALISingle-point emergency(Note: options are indent only)

StandardsManufactured under ISO 9001:2015 to standardsIEC/AS/NZS 60598.1IEC/AS/NZS 60598.2.1IEC/AS/NZS CISPR 15

Mounting Methods 

 

         

ASCELLACommercial Lighting / Batten

1

Specifications

Model ACW435RBL4K

Nominal Power (W) 35

Input Voltage (V) 220 - 240

Frequency (Hz) 50 / 60

Luminaire Flux (lm) 4370

Luminaire Efficacy (lm/W) 120

CRI (Ra) > 80

Power Factor 0.98

CCT (K) 4000

Luminaire Rated Life (hr) >50000

Ambient Temp. ta (°C) 35

Weight (kg) 2.0

IK Rating 00

Packaging Details

Model ACW435RBL4K

Product Carton Qty per box (pc)

1

Product Carton Dimension (mm)

1234 x 131 x 71

 

Lighting Data Dimensions

ASCELLACommercial Lighting / Batten

2davislighting.com davislighting.com.au

All photometric and electrical data published are of ±10% tolerance. Characteristics and specifications may change without notice. All electrical installations / connections should be carried out by a suitably qualified person. Application images are indicative only and may not contain actual Davis product. The information contained in this publication is typical and must not be interpreted as a guarantee of individual product performance.

Generated on: 01-07-2021Copyright © 2021 Davis Lighting. All Rights Reserved.