Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Please read this operation manual before using the air conditioner.K eep this operation manual for future reference.
SPLIT TYPE ROOM AIR CONDITIONOPERATION M ANUAL
ER
AS0 9 DCBHRA
AS12DCBHRA
AS18 DDBHRA
This appliance is filled with R3 2.
0 0 1150 0 24 7
AS53 DDBHRA
AS26 DCBHRA
AS3 5DCBHRA
WARNING :
Re a d t h e p r e c a u t i o n s i n t h i s m a n u a lc a r e f u l l y b e f o r e o p e r a t i n g t h e u n i t . Th i s a p p l i a n c e i s f i l l e d w i t h R3 2.
U s e a c a b l e o f s u i t a b l e l e n g t h , D o n o t u s e t a p p e d w i r e s o r a n e x t e n s i o n l e a d a s t h i s m a y c a u s e o v e r h e a t i n g , e l e c t r i c s h o c k s , f i r e o r e x p l o s i o n .
A l l t h e c a b l e s s h a l l h a v e g o t t h e l o c a l a u t h e n t i c a t i o n c e r t i f i c a t e . D u r i n g i n s t a l l a t i o n , w h e n t h e c o n n e c t i n g c a b l e s b r e a k o f f , i t m u s t b e a s s u r e d t h a t t h e g r o u d i n g w i r e i s t h e l a s t o n e t o b e b r o k e n o f f .
If r e f r i g e r a n t g a s l e a k s d u r i n g i n s t a l l a t i o n , v e n t i l a t e t h e a r e a i m m e d i a t e l y . o x i c g a s m a y b e p r o d u c e d
A f t e r c o m p l e t i n g i n s t a l l a t i o n , c h e c k f o r r e f r i g e r a n t g a s l e a k a g eW h e n i n s t a l l i n g o r r e l o c a t i n g t h e a i r c o n d i t i o n e r , b e s u r e t o b l e e d t h e r e f r i g e r a n t c i r c u i t t o e n s u r e
i t i s f r e e o f a i r , a n d u s e o n l y t h e s p e c i f i e d r e f r i g e r a n t ( R3 2) .Ma k e s u r e g r o u n d c o n n e c t i o n i s c o r r e c t a n d r e l i a b l e . D o n o t e a r t h t h e u n i t t o a u t i l i t y p i p e , l i g h t n i n g
c o n d u c t o r o r t e l e p h o n e e a r t h l e a d . Im p e r f e c t e a r t h i n g m a y r e s u l t i n e l e c t r i c s h o c k s .B e s u r e t o i n s t a l l a n e a r t h l e a k a g e c i r c u i t e x p l o s i o n - p r o o f b r e a k e r .
D o n o t u s e m e a n s t o a c c e l e r a t e t h e d e f r o s t i n g p r o c e s s o r t o c l e a n , o t h e r t h a n t h o s e r e c o m m e n d e d b y t h e m a n u f a c t u r e r .
Th e b r e a k e r o f t h e a i r c o n d i t i o n e r s h o u l d b e a l l - p o l e s w i t c h a n d e x p l o s i o n - p r o o f . Th e d i s t a n c e b e t w e e n i t s t w o c o n t a c t s s h o u l d n o t b e n o l e s s t h a n 3 m m . S u c h m e a n s f o r d i s c o n n e c t i o n m u s t b e i n c o r p o r a t e d i n t h e w i r i n g .
A s k y o u r d e a l e r o r q u a l i f i e d p e r s o n n e l t o c a r r y o u t i n s t a l l a t i o n w o r k . D o n o t a t t e m p t t o i n s t a l l t h e a i r c o n d i t i o n e r y o u r s e l f . Im p r o p e r In s t a l l a t i o n m a y r e s u l t i n w a t e r l e a k a g e , e l e c t r i c s h o c k s , f i r e o r e x p l o s i o n .
In s t a l l t h e a i r c o n d i t i o n e r i n a c c o r d a n c e w i t h t h e i n s t r u c t i o n s i n t h i s i n s t a l l a t i o n m a n u a l B e s u r e t o u s e o n l y t h e s p e c i f i e d a c c e s s o r i e s a n d p a r t s f o r i n s t a l l a t i o n w o r k .In s t a l l t h e a i r c o n d i t i o n e r o n a f o u n d a t i o n s t r o n g e n o u g h t o w i t h s t a n d t h e w e i g h t o f t h e u n i t .El e c t r i c a l w o r k m u s t b e p e r f o r m e d i n a c c o r d a n c e w i t h r e l e v a n t l o c a l a n d n a t i o n a l r e g u l a t i o n s
a n d w i t h i n s t r u c t i o n s i n t h i s i n s t a l l a t i o n m a n u a l , B e s u r e t o u s e a d e d i c a t e d p o w e r s u p p l y c i r c u i t o n l y . Th e w i r i n g m e t h o d s h o u l d b e i n l i n e w i t h t h e l o c a l w i r i n g s t a n d a r d . Th e t y p e o f c o n n e c t i n g w i r e i s H 0 7 RN- F.
.
Th e a p p l i a n c e m u s t b e s t o r e d i n a r o o m w i t h o u t c o n t i n u o u s l y o p e r a t i n g i g n i t i o n s o u r c e s , t h e r a d i u s o f t h e s t o r a g e a r e a s h o u l d b e n o l e s s t h a n 2. 5 m ( f o r e x a m p l e : o p e n f l a m e s , a n o p e r a t i n g g a s a p p l i a n c e o r a n o p e r a t i n g e l e c t r i c h e a t e r ) . D o n o t p i e r c e o r b u r n .B e a w a r e t h a t r e f r i g e r a n t s m a y n o t c o n t a i n a n o d o u r .
C o m p l y w i t h n a t i o n a l g a s r e g u l a t i o n s .Th i s a p p l i a n c e i s n o t i n t e n d e d f o r u s e b y p e r s o n s ( i n c l u d i n g c h i l d r e n ) w i t h r e d u c e d p h y s i c a l ,s e n s o r y o r m e n t a l c a p a b i l i t i e s , o r l a c k o f e x p e r i e n c e a n d k n o w l e d g e , u n l e s s t h e y h a v e b e e ng i v e n s u p e r v i s i o n o r i n s t r u c t i o n c o n c e r n i n g u s e o f t h e a p p l i a n c e b y a p e r s o n r e s p o n s i b l e f o rt h e i r s a f e t y . C h i l d r e n s h o u l d b e s u p e r v i s e d t o e n s u r e t h a t t h e y d o n o t p l a y w i t h t h e a p p l i a n c e .
C l e a n i n g a n d u s e r m a i n t e n a n c e s h a l l n o t b e m a d e b y c h i l d r e n .Th e a i r c o n d i t i o n e r c a n n o t b e d i s c a r d e d o r s c r a p p e d Ra n d o m l y
Re u s a b l e m e c h a n i c a l c o n n e c t o r s a n d f l a r e d j o i n t s a r e n o t a l l o w e d i n d o o r .
If y o u n e e d p l e a s e c o n t a c t c u s t o m e r s e r v i c e p e r s o n n e l o f H a i e r t o s c r a p i n o r d e r t o o b t a i n t h e c o r r e c t d i s p o s a l m e t h o d s .
i f t h e r e f r i g e r a n t c o m e s i n t o c o n t a c t w i t h f i r e , a n d e x p l o s i o n m a y b e h a p p e n .
Th e a p p l i a n c e m u s t b e i n s t a l l e d , o p e r a t e d a n d s t o r e d i n a r o o m w i t h a f l o o r a r e a l a r g e r t h a n 3 mTh e r o o m s h o u l d b e w e l l v e n t i l a t e d .
K eep this manual where the user can easily find it.
1
15
1
2
14
11
ContentsPARTS AND FUNCTIONS
OPERATION
INDOOR UNIT INSTALLAION
MAINTENANCE
CAUTIONS
TROUBLE SHOOTING 16
2
Parts and FunctionsIndoor Unit
Ou tdoor Unit
Rem ote c ontrol l er
O u t e r s i d e o f t h e c o n t r o l l e r
OUTLET CONNECTING PIPING AND ELECTRICAL WIRING
INLET DRAIN HOSE
4
Actual inlet grille may vary from the one shown in the manual according to the product purchased
1. ECOPILOT button
2. DRY button
3 . COOL buttonUsed to set COOL operation.
4 .
5.n.6 oitcnufhcaefoyalpsiD
status
8 . WIFI and CLOCK display
7 . Operation mode display
9 . TEM P display10 . Humidity display
11. FAN SPEED display
12. SWING display Swing up/down display swing left/right display
14 . FAN button
15. QUIET/TURBO button
16 . HEAT button
17 . SELF CLEAN button
Used to set DRY operation.
13 . TIM ER ON display TIM ER OFF display CLOCK display
TIM ER
1
2
3
4
5
6
7
8 9
10
11
12
13
15
16
17
14
TEM P button used to change setting temperature
ON / OFF button
Display board
Signal receiver hole
COOL display
HEALTH display
2
65
1
4
DRY display3
WIFI display7
SENSOR display8 Ambient temp.displayWhen receiving the remote
control signal, display the set temperature.
HEAT display
15
2
6
4 8
3
7ECOPILOT
3
Inlet
Air Purifying Filter( inside)
ON/OFF Button
Inlet grille
( adjust left and ow)
V ertical blade
right air fl
Horizontal flap( adjust up and down air flow Don' t adjust it manually)
Outlet
Display board( inside)
NOTE:a. Humidity display is unavailable on some modelsb. If the model you buy has a WIFI function, press the“ ON/OFF” button for 5s to emit the WIFI binding signal. Once in the binding mode, the APP will show how to bind.
S EL FC L EA N
QUIET/TURBO
OperationCl oc k s et
Note:Note:The distance between the signal transmission head and the receiver hole should be within 7 m without any obstacle
change- over wireless telephone is installed in the type
in receiving the signals, so the distance to the indoor unit should be shorter.Full display or unclear display during operation indicates the batteries have been used up. Please change batteries. If the remote controller can’ t run normally during operation, please remove the batteries and reload several minutes later.
.
Hint:Remove the batteries in case unit won’ t be in usage for a long period.
20 . 10 ºC button special heating set function: 10 degree heating maintaining ( valuable for RS)
18 . buttonTIM ER
23 . SWING up/down button24 . SWING left/right button
19 . buttonCLOCK
26 . HEALTH AIRFLOW button
21. HEALTH button
28 . CODE button A- b yard
29 . APPLY button
3 0 . ° F/° C button
25. SLEEP button
19
20
21
22
23 24
25
26
27
28
29
3 0
18
22. SM ART button Used to set SM ARToperation. ( This function is unavailable on some models.)
27 . LIG HT buttonControl the lightening and extinguishing of the indoor LED display board.
Press CLOCK button,
Press “ ” or “ ” to set correct time.
Each press will increase or decrease 1min. If the button is kept pressed, time will change q uickly.
press APPLY, starts working.
1
2
3
4
1.SM ART+SLEEP: When the light sensing function is enabled,the appliance will be in the mode. If the appliancedetects that indoor light is weak ( lower than the settingvalue) for several minutes, the human sensing functionworks automatically. If the appliance detects no movementsof people for 20 minutes , during which the light is weakerthan the setting value , it will enter the “ SM ART SLEEP”mode automatically. The appliance will operate as per thesleep curve.( See the“ SLEEP” function in Page 7 ) .Conditions to exit:1) The appliance detects that the indoor light is strongerthan the setting value for 20 minutes.2) The appliance is in the 8 h “ SM ART SLEEP” mode.3 ) The “ LIG HT SENSING ” function is disabled.When any of the above conditions is met, the appliance willexit from the “ SM ART SLEEP” mode. Once out of the“ SM ART SLEEP” mode, the appliance will operate underthe operation status initially set on the remote controller.Note: 1) This function is not available in the “ AIR SUPPLY”
mode.2) This function is not available in the “ SLEEP” mode.3 ) When it is in the " REM OTE SLEEP” mode or the“ TIM ER” is on, the appliance will exit from this function.4 ) Light sources like indoor lamps and TV ’ s LEDlight, and freq uent movement s of pets will affect thisfunction.
2.Press “ HEALTH” +“ HEALTH AIRFLOW” simultaneously canset and cancel the “ LOCK ” function ( )
TIM ER
TIM ER
COOL,HEAT and DRY Operation
OperationQUIET/TURBO Operation
Operation
1. In DRY mode, when room temperature becomes lower than temp. setting +2 ºC, unit will run intermittently ai LOW speed regardless of FANsetting.
2. Remote controller can memorize each operation status. When starting it next time, just press ON/OFF button and unit will run in previous status.
QUIET/TURBO Operation
You can use this function when silence is needed for rest or
reading.
For each press, is displayed Air conditioner starts
QUIET/TURBO function operation. In QUIET/TURBO operation mode, fan speed automatically takes low speed of
disappears, the operation stops.
QUIET
Unit start.
Select operation mode.
Press the COOL button on
the remote control.
Press the HEAT button on the remote control.
Press the DRY button on the remote control.
1
2
ECOPILOTECOPILOT
QUIET
5
QUIET/TURBO
QUIET/TURBO
QUIET/TURBO
SELFCLEAN
SELFCLEAN
AUTO fan mode. Press QUIET/TURBO button again,
Operation
6
A human sensor is used to detect changes in the infrared radiationemitted by human bodies. In case of the following conditions, the detection may not be accurate:
temperature
objects due to the wind.
sharply.
Besides, if a person is at the border of two or three air blowing areas, If a person stands between two air blowing areas, following air will be sent to these two areasrespectively or be swept automatically. The avoiding air will avoid these two areas or be swept automatically.
Unit will start running to reach the temp. setting on LCD.
AN Operation
changes as follows:
Unit will run at selected fan speed.
button.
pressed, temp. setting increases 0 .5 ºC.
pressed, temp. setting decreases 0 .5 ºC.
1
2
changes as follows:
1
cancel
CO ILO CO ILO
CO ILO
QUIET/TURBO
QUIET/TURBO
SELFCLEAN
SELFCLEAN
and outlet grills of the air conditioner are opened, and the unit goes on working under the condition before the
grille will close automatically.
Notice:Cannot pull direct the outlet grille by hand. Otherwise, thegrille will run incorrectly. If the grille is not run correctly,stop for a minute and then start, adjusting by remote controller.Remote controller can memorize each operation status. when starting it next time, just press ON/OFF button and unit will run in previous status.
The setting of
function
The cancel of
function
Operation
HEALTH AIRF LOW OperationECOP ILOT Operation
appears on the display. Avoid
the body.
again, appears on the display.
direct to the body.
Note:
2. In heating, it is better to select the mode.3 . In cooling, it is better to select the mode.4 . In cooling and dry, using the air conditioner for a
long time under the high air humidity, a phenomenon falling drips of water occurs at the outlet grille.
5. Select the appropriate fan direction according to the actual conditions.
TIM ER
7
Human Sensing Function1. “ Follow” function: It can detect where a person is and adjust the swing flap accordingly and send air to the location of this person. If it detects people in two locations, the swing flap will blow alternatively between these two locations and stay at each location for 15s. If the appliance detects people in three or more locations, the left and right swing flaps will swing automatically. “ Avoid” function: When the appliance detects a person in a location, it will adjust the swing flap to avoid such a location. If it detects people in three or more locations, the left and right swing flaps will swing automatically.Note:1) When there are people in several locations or a person freq uently moves between several locations,if this person is in the in- between location or the crossing location, whether the appliance is in a “ Follow” mode or an“ Avoid” mode, thes wing flap will swing automatically to send air to these locations.2) Whether the setting is “ Follow” or “ Avoid” , it takes some time to adjust theair direction after the appliance identifies the location of the people and the air direction will not change immediately.
3 ) If the actual airflow cannot reach ( or avoid) the location where a person is due to such factors as fan speed setting, temperature setting, ambient temperature difference andlayout of the room, pressing the left and right swing flaps can adjustthe air direction and set the airflow direction by hand.4 ) Set the health airflow when the human sensing ( including follow/avoid) function is enabled and exit from the human sensing ( including follow/avoid) function.
5) Press the upper and lower swing flaps when the human sensing ( including follow/avoid) function is enabled, there is no upper and lower full swing status.
6 ) When the appliance is in the upper and lower full swing status, set the human sensing function ( including follow/avoid) , the upper and lower swing flaps are in their standard positions of relevant mode.2. When the human sensing function is enabled, if the appliance cannot detects people for a long time ( at least 20 minutes) , it will automatically enter the power saving mode. In the power saving mode, the operating freq uency will lower down and the fan speed is low. Once a person is detected, the appliance will exit from the power saving mode.
S W IN G Operation
To cancel TIM ER modeJ ust press APPLY button TIM ER dispiay disappear.
Operation
TIM ER
Set Clock correctly before starting Timer operation. You can let unit start or stop automatically a following times: Before you wake up in the morning, or get back from work or after you fall asleep at night.
mode.
Time setting.
Remote controller: “ TIMER ON”
Remote controller: “ TIMER OFF”
“ ON ” or “ OFF”
Every time the button is pressed, time setting increases or decreases
Select your desired TIM ER ON.
Select your desiredTIM ER OFF.
TIM ER Operation
11
2
1 min, if kept depressed, it will increase rapidly. It can be adjusted within 12 hours.
APPLY
Select your desired operation
3
COOL/DRY:
For each press of “ ” button, air
displays as follows according to different operation modes:
When humidity is high, condensed water might occurat air outlet if all vertical louvers are adjusted to left orright.
position for a long time in COOL or DRY mode, otherwise, condensed water might occur.
1
2
HEAT:
SM ART:
Initial state
Initial state
For each press of “ ” button, remote controller displays as follows:
remote controller:
8
.
Before going to bed, you can simply press the SLEEPbutton and unit will operate in SLEEP mode and bring you a sound sleep.
3 hours before it stops. The temperature is lower than setting temperature so that it won’ t be too high for your sleep;
Approx. 6 hrs
Temp. setting
Decreases 2 ºC
Decreases 2 ºC
Unit stop
Rises 1 ºC
Rises 1 ºC
Rises 1 ºC
Temp. setting
In COOL, DRY mode
In HEAT mode
Unit stop
1 hr
1 hr
1 hr
3 hrs3 hrs
1 hr
SLEEPoperation starts
SLEEPoperation starts
SLEEPoperation stops
SLEEPoperation stops
Press SLEEPbutton.
Operation M ode
1. In COOL, DRY mode
1 hour after SLEEP mode starts, temp. will become 1 ºChigher than temp. setting. Afteranother 1 hour, temp. rises by 1 ºC further. The unit will run for further 6 hours then stops Temp.is higher than temp. setting so that room temperature won’ t be too low for your sleep.
2. In HEAT mode
1 hours after SLEEP mode starts, temp will become 2 ºC lower than temp. setting. After another 1 hour, temp decrease by 2 ºC further. After 3 more hours,temp. rises by 1 ºC further. The unit will run for another
3 . In SM ART mode
The unit operates in corresponding sleep mode, which adapts to the automatically selected operation mode.
4 . When q uiet sleeping function is set to 8 hours the q uiet sleeping time can not be adjusted. When TIM ER ONfunction is set, the q uiet sleeping function can’ t be set up. After the sleeping function is set up, if user resets TIM ER ON function, the sleeping function will be cancelled; the machine will be in the state of timing-off, if the two modes are set up at the same time, either
automatically, and the other mode will be cancelled.
P ow er F ail u re Res u m e F u nc tion
not start running unless 3 minutes have elapsed. When the power resumes after power failure, the unit will run automatically, and 3 minutes later the compressor starts running.
N ote to th e pow er f ail u re res u m e:
enter function after four beeps.
hearing two sounds.
Com f ortab l e S LEEP
Operation
9
times within five seconds and leave this function after
( This function is unavailable on some models)One key can give you a comfortable room!The air conditioning unit can judge the indoor temperature and humidity, and make the adjustment accordingly.
SM ART start
or SM ART stops
Press SM ART button, unit starts.
Under the cooling, heating mode, press the smart key to enter the smart function. Under the smart running mode, when the air conditioning is running, it will automatically select cooling, heating mode as when the smart functionis running, press the “ cooling” “ heating” key to switch to the other mode, you will exit from the smart function.
After the power saving is set, the host machine will automatically adjust the setting temperature, and automatically control the switch of the compressor,which may be inconsistent with the user’ s setting.
The power saving function is more effective after the air conditioning has been running for a long time ( more than 2 hours)
SM ART FRESHSM ART DefrostSM ART FAN SPEEDSM ART FAN HEALTHSM ART DRYSM ART SOFTSM ART Control temperature
S M ART Operation S ELF CLEAN Operation
SM ART
Operation
10
◆Functional description: the purpose of this function is to clean the evaporator.
Entry and exit Press self clean button to enter this function, then it will display " CL" on the panel of the indoor unit and also on the remote controller. After running 20 - 3 0 minutes, this function will exit automatically when the " Pi " sound is heard twice, then the unit returns to original state. Under operation process of self clean, pressing the button repeatedly has no effect and the function will not exit, but pressing the power off button and other mode button can make it exit.
Note:1.It has no effect under the mode of timer/sleep.2.After this mode starts, the air volume may reduce or it may even have no airflow.3 .It is normal if the unit makes some noise like expandingwith heat and contracting with coldness. 4 . The “ CL” display time may last differently on the remote controller and panel.5.It is normal if the temperature is below 0 ℃ outside, the unit may display " F25" under this mode running. Please turn off the unit for 10 seconds then restart.6 .The best condition to run this mode: the temperature is 15℃~ 27 ℃ and the humidity is 3 5%~ 6 0 % in the door, the temperature is 3 0 ℃~ 4 0 ℃(cooling season) and below 10 ℃(heating season) out the door.7 .It is hard to frost if the air is too dry( humidity<20 % ) . and if the humidity is too high( humidity>7 0 % ) ,the condensed water may increase, which may move away some frost.
.ON/OFF Operation:Use this operation only emergency running, for example,when the remote controller is defective or lost. The air conditoner can run automatically for a while.When the emergency operation switch is pressed, the “ Pi” sound is heard once, which means the start of this operation.
emergency operation starts, the unit will run automatically in the following modes:
Roomtemperature
Designatedtemperature
Timermode
Fanspeed
Operationmode
Above 24 ºC 24 ºC No AUTO COOL
Below 24 ºC 24 ºC No AUTO HEAT
It is impossible to change the settings of temp. and fan speed, It is also not possible to operate in timer or dry mode.
Test operation:Test operation switch is the same as emergency switch.Use this switch in the test operation when the room temperature is below 16 ºC, do not use it in the normal operation.Continue to press the test operation switch for more than 5 seconds.After you hear the “ Pi” sound twice,
ON /OF F operation and tes t operation
Operation
Pi
Pi Pi
11
When indoor fan motor is running, it has healthy process function. ( It’ s available under any mode) When the fan in the indoor unit does not work, the health lamp lights up, but the anion generator does not release anion.
HEALTH Operation
The water- ion generator in the airconditioner can generate anion, effectively balance the q uantity of position and anion in the air.The anion will also kill bacteria and speed up the dust sediment.
Press HEALTHbutton
Press HEALTH button for twice press, disappears, the operation stops.
For each press, is displayed Air conditioner starts health anion function operation.
Loading of th e b attery
Remove the battery cover;
1
Load the batteries as illustrated. 2 R- 0 3 batteries, resetting key ( cylinder) ; Be sure that the loading is in line with the “ +” /“ - ” ;
Load the battery, then put on the cover again.
2
3
DRED OPERATION
11+2= kg
R3 22 kg2=
1=B
C
D
F E
kg
A
This product contains fluorinated greenhouse gases covered by the K yoto Protocol. Do not vent into the atmosphere.Refrigerant type: R3 2G WP* value: 6 7 5G WP= global warming potentialPlease fill in with indelible ink,
and
on the refrigerant charge label supplied with the product.The filled out label must be adhered in the proximity of the productcharging port ( e.g. onto the inside of the stop value cover) .A contains fluorinated greenhouse gases covered by the K yoto ProtocolB factory refrigerant charge of the product: see unit name plateC additional refrigerant amount charged in the fieldD total refrigerant chargeE outdoor unitF refrigerant cylinder and manifold for charging
IM PORTANT INFORM ATION ABOUTTHE REFRIG ERANT
Contains fluorinated greenhouse gasescovered by the K yoto Protocol
12
Haier Peaksmart enabled air- conditioners have a Demand Response M ode display on the indoor unit.The display could be labelled d1, d2, d3 ( wording maydiffer model to model) .
odottahWnoitpircseDyalpsiDedoM
DRM 3 d3
Your air- conditioner will continueto cool or heat during the peakdemand event. The energyconsumed by your air- conditioneris capped to 7 5% .
No action is req uired.
DRM 2 d2
Your air- conditioner will continueto cool or heat during the peakdemand event. The energyconsumed by your air- conditioneris capped to 50 % .
No action is req uired.
DRM 1 d1
Your air- conditioner is still turnedon and the fan will continue tooperate. Your compressor isturned off and cool/hot air will nolonger be generated
DRM 1 mode is only activated during emergency demand managementsituations. This mode will automatically resetthe device within 2 hours .If your air- con is inthis mode for longer than 2 hours pleasecontact Energex on 13 12 53 .
( This function is unavailable on some models.)
These modes are described in more detail below:
F
A
C
E
D
Drawing for the installation of indoor and outdoor units
Necessary parts for piping
Non- adhesive tapeAdhesive tape
Saddle ( L.S) with screwsConnecting electric cablefor indoor and outdoorDrain hoseHeating insulating materialPiping hole cover
The marks from toin the gure are the
parts numbers.The distance betweenthe indoor unit and theoor should be more
than 1.8 m.
The models adopt HFC free refrigerant R3 2
more than20 cm
more than 20 cm
more than 10 cm
more than 3 0 cmmore than3 0 cm
more than6 0 cm
more than 6 0 cm
AG
Necessary Tools for Installation
Driver Torq ue wrench( 17 mm,22mm,26 mm)Nipper
Reamer
Hacksaw Pipe cutter
G as leakage detector orsoap- and- water solution
Hole core drill Flaring toolSpanner( 17 ,19 and 26 mm) K nife
M easuring tape
Indoor UnitPlace, with minimize shock and vibration, where the body can be supported suf ciently.Place, not affected by heat or steam generated in the vicinity, where inlet and outlet of theunit are not disturbed.Place, possible to drain easily, where piping can be connected with the outdoor unit.Place, where cold air can be spread in a room entirely.Place, nearby a power receptacle, with enough space around. ( Refer to drawings) .With the distance 1 meter from the television, radio, wireless apparatuse and fluorescent lamp and be left.In the case of xing the remote controller on a wall, place where the indoor unit canreceive signals when the uorescent lamps in the room are lightened.
Outdoor UnitWith less rain or direct sunshine.Place, which is on a strong stand , where vibration and noise are not increased.Place, where discharged wind and noise do not cause a nuisance to the neighbors.Place, where a distance marked is available as illustrated in the above gure.
Before inserting power plug into receptacle, check the voltage without fail.The power source is the same as the corresponding name plate.Install an exclusive branch circuit of the power.A receptacle shall be set up in a distance where the power cable can bereached.Do not extend the cable by cutting it.
Selection of Installation Place
Power Source
A
F
C
ED
G
B
Arrangement of pipingdirections
Rear leftLeft Rear
right
Right
Below
G
Preparation
Please refer to the actual product purchased , the above picture is just for your reference.
Attention must be paid tothe rising up of drain hose
Read this manual before installationExplain suf ciently the operating means to the user according to this manual
Installation M anual of Room Air Conditioner
13
No. Accessory parts
Remote controller
R- 0 3 dry battery
M ounting plate
Drain hose
Steel nail, cement
Screw Plastic cap
11
2
3
4
5
6
7
9
10
11
2
1
1
6
4
Drain- elbow 1
Cover 1
Cushion 4
1
2
2
1
Number ofarticles
Accessory parts
4 X 50
4 X 25
8 Pipe supporting plate
Filter
Flare nut
DRED
12
13
Note: Cooling only units don' t have Drain- elbow
Indoor Unit Installation
Fix to side bar and lintel a mounting bar, Which is separately purchasedand then fasten the plate to the fixed mounting bar.Refer to the previous article, “ When the mounting plate is fi
position of wall hole.
M ake a hole of 7 0 mm in diameter, slightly descending to outside the wallInstall piping hole cover and seal it off with putty after installation
1. Carry out, based on the neighboring pillars or lintels, a to be fixed against the wall, then temporarily fasten the plate
with one steel nail.2. M ake sure once more the proper level of the plate, by hanging a thread
with a weight from the central top of the plate, then fasten securely theplate with the attachment steel nail.
3 . Find the wall hole location A using a measuring tape
When the mounting plate is fixed side bar and lintel
Fitting of the M ounting Plate and Positioning of the wall Hole
Lid for rightpiping
Lid for under piping pipe
Fix with adhesive tape
Lid for left piping
Indoor/outdoor electric cable and drain hose must be bound withefrigerant piping by protecting tape.
[ Other direction piping ]Cut away, with a nipper, the lid for piping according to the pipingdirection and then bend the pipe according to theposition of wallhole. When bending, be careful not to crash pipes.Connect beforehand the indoor/outdoor electric cable, and thenpull out the connected to the heat insulation of connecting partspecially.
proper levelingfor the plate
rst fixed “ ,for the
M aking a Hole on the Wall and Fitting the Piping Hole Cover
Drawing of pipe
Installation of the Indoor Unit
[ Rear piping ]Draw pipes and the drain hose, then fasten them with the adhesive tape
[ Left Left- rear piping ]In case of left side piping, cut away, with a nipper, the lid for leftpiping.In case of left- rear piping, bend the pipes according to the pipingdirection to the mark of hole for left- rear piping which is marked onheat insulation materials.
1. Insert the drain hose into the dent of heat insulation materials ofindoor unit.
2. Insert the indoor/outdoor electric cable from backside of indoorunit,and pull it out on the front side, then connect them.
3 . Coat the flaring seal face with refrigerant oil and connect pipes.Cover the connection part with heat insulation materials closely,and make sure fixing with adhesive tape
Hang surely the unit body onto the uppernotches of the mounting plate. M ove the bodyfrom side to side to verify its secure fixing.
In order to fix the body onto the mountingplate,hold up the body aslant from theunderside and then put it down perpendicularly.
Remove terminal cover at right bottom corner of indoor unit, then take off wiring cover by removingits screws.
mounting plate
When you unload the indoor unit,please use your hand to arise
slightly and lift the unit aslant until it leaves the mounting plate.
agraffe mounting plate
the body to leave agraffe,then lift the bottom of the body outward
Heat insulationmaterial
Drain hose
Piping
Pipe supportingplate
Indoor/outdoor electric cable
Indoor side Outdoor side
Ø 7 0 mm
Wall hole
Thickness of wall
( Section of wall hole) Piping hole pipeG
When the mounting plate is first fixed
Fixing the indoor unit body
Unloading of indoor unit body
Connecting the indoor/outdoor Electric Cable
Removing the wiring cover
10 8 mm
66m
m
14
222mm
52m
m
6 5mm
13 8 mm
55m
m
6 5mm
0 9 - 12K
18 K
1. Insert from outside the room cable into left side of the wallhole, in which the pipe has already existed.
2. Pull out the cable on the front side, and connect the cablemaking a loop.
When connecting the cable, confirm the terminal number of indoor andoutdoor units carefully. If wiring is not correct, proper operation can notbe carried out and will cause defect.
Insert the cable from the back side of the unit, then pull it out on the front side.
Loosen the screws and insert the cable ends fully into terminal block, thentighten the screws.Pull the cable slightly to make sure the cables have been properly inserted andtightened.After the cable connection, never fail to fasten the connected cable with thewiring cover.
When connecting the cable after installing the indoor unit
When connecting the cable before installing the indoor unit
Note:
1. If the supply cord is damaged, it must be replaced by the manufacturer or itsservice agent or a similar q ualified person. The type of connecting wire isH0 5RN- F or H0 7 RN- F.
2. If the fuse on PC board is broken please change it with the type of
3 . The wiring method should be in line with the local wiring standard.4 . After installation, the power plug should be easily reached.5. A breaker should be incorporated into fixed wiring. The breaker should be
all- pole switch and the distance between its two contacts should be not lessthan 3 mm.
T.3 .15A/250 V AC ( Indoor) .
Connecting wiring 4 G * 0 .7 5mm2
Codeindication Trouble description Analyze and diagnose
E1
E2
E 4
E 7
E1 4
Heat- exchangesensor failure
Indoor EEPRO Merror
Com m unicationfault betweenindoor and outdoorunits
Indoor fan m otorm alfunction
Operation halt due to breakingof w ire inside the fan m otor ;Operation halt due to breakingof the fan m otor lead wires ;Detection error due to faultyindoor unit PCB ;
Indoor unit - outdoor unit signaltransm ission error due to w iringerror ;Faulty PCB ;
Faulty EEPRO M data ;Faulty EEPRO M ;Faulty PCB ;
Faulty connector connection ;Faulty therm istor ;Faulty PCB ;
Room temperature sensor failure
The power source must be exclusively used for air conditioner.In the case of installing an air conditioner in a moist place, please installan eaFor installation in other places, use a circuit breaker as far as possible.
Pipe cutting is carried out with a pipe cutter and burs must be removed.After inserting the flare nut, flaring work is carried out.
Power Source Installation
Cutting and Flaring Work of Piping
Flare tool for R4 10 A Conventional flare tool
Clutch- type clutch- type( Rigid- type) Wing- nut type ( Imperial- type)
A 0 ~ 0 .5mm 1.0 ~ 1.5mm 1.5~ 2.0 mm
rth leakage breaker.
Lean Damage of flare Partial Too outside
tcerrocnItcerroC
On Drainage
It becomeshigh midway.
The gap with theground is too small.
There is the badsmell from a ditch
It waves.The end is imm-ersed in water.
Please install the drain hose so as to be downward slope without fail.Please don’ t do the drainage as shown below.
Please pour water in the drain pan of the indoor unit, andis carried out surely to outdoor.
In case that the attached drain hose is in a room, please apply heatinsulation to
Less than5cm
confirm thatdrainage
it without fail.
Crack
Check Items for Test Run
G as leak from pipe connecting?Heat insulation of pipe connecting?Are the connecting wirings of indoor and outdoor firmly
Is the connecting wiring of indoor and outdoor firmly fixed?Is drainage securely carried out?Is the earth line securely connected?Is the indoor unit securely fixed?Is power source voltage abided by the code?Is there any noise?Is the lamp normally lighting?Are cooling and heating ( when in heat pump) performed normally?Is the operation of room temperature regulator normal?
Please check how to operate through the instructionmanual.
inserted to the terminal block?
Put check mark in boxes
Flare tooling die 1.Cut pipe 2.Remove burs
3 .Insert the flare nut4 .Flare pipe
On Drainage
Check for Installation and Test Run
15
{POWER
- mod: 0 9 - 12: 3 G * 1.5mm²- mod: 18 : 3 G * 2.5mm²
Indoor unit
Outdoor unit
4 G * 0 .7 5mm²
Power cable:
Maintenance
Setting of proper roomtemperature
Close doors and windowsduring operation
If the unit is not to be usedfor a long time, turn off thepower supply main switch.
Use the timer effectively
Use the louvers effectively
Do not block the air inletor outlet
Propertemperature
During cooling operationprevent the penetration of direct sunlight with
curtain or blind
OFF
Remote Controller Indoor Body
1.Open the lnlet Grille
2.Detach the standard air filter
3.Attach Air Purifying Filter
4.Attach the standard air filter(Necessary installation)
5.Close the Inlet Grille
Slide the knob slightly upward to release the filter, then withdraw it.
Put air purifying filter appliances into theright and left filter frames.
NOTE:The photocatalyst air purifying filter will be solarized in fixedtime. Normall, the filter will be solarized every 6 months.
ATTENTION:
Please keep the bacteria-killing medium air purifying filter inavoid long time directly sunshine
when you stop using it,or its ability of sterilization will bereduced.
The bacteria-killing medium air purifying filter will be used for a long time,no need for replacement. But in the period of using them ,you should remove the dust frequently by using vacuum cleaner or flaping them lightly,otherwise ,its performance will be affected.
the cool and dry conditions
For Smart Use of The Air Conditioner
Replacement of Air Purifying Filter
The white side of the photocatalyst air purifying filter face outside,and the black side face the unit The green side of the bacteria-killing medium air purifying filter face outside,and the white side face the unit.
Do not usewater,wipe the controllerwith a dry cloth.Do not use glasscleaner or chemical cloth.
wipe the air conditioner by using a soft and dry cloth.For serious stains,use a neutral detergent diluted withwater.Wring the water out of the cloth before wiping,then wipe off the detergent completely.
Air Filter cleaning
Press the “SLEEP” button for
Press the SLEEP button on the remote controller for 5 seconds until the panel is lifted partly.
5s to partially raise the panel.
Cut off the power supply in case of any electricity emergency.Open the panel and support it with a fixture.Then remove the filter and clean it.After cleaning, reinstall the filter, put down the fixture and close the panel.
Do not use the following for cleaning
Gasoline,benzine, thinner or cleanseray damage the coating of the unit.
Hot water over 40OC(104OF) maydiscoloring or deformation.
Once everytwo weeks
m cause
Detach old Air Purifying Filter
16
5
Connect to power supply, press the SLEEP button and hold it until the panel is repositioned.
Long press the “SLEEP” button and the panel will automatically lower down and become closed.
6
the power supply cordand so on.
2.Do not install in the place where there is any possibility of inflammable gas leakage around the unit.3.Do not get the unit exposed to vapor or oil steam.
Cautions
Please call Sales/Service Shop for the Installation.Do not attempt to install the air conditioner by yourself because improper worksmay cause electric shock, fire, water leakage.
Connect the earthcable.
earthing
WARNINGWhen abnormality such as burnt-small found, immediately stop the operation button andcontact sales shop.
OFF
Use an exclusive power sourcewith a circuit breaker
ENFORCEMENT
Connect power supply cordto the outlet completely
Use the proper voltage
Do not use power supply cord in a bundle.
Take care not to damagethe power supply cord.
1.Do not use power supply cord extended or connected in halfway
STRICTENFORCEMENT
STRICT
STRICTENFORCEMENT PROHIBITION
PROHIBITION PROHIBITION
PROHIBITION
Do not start or stop theoperation by disconnecting
Do not channel the air flow directlyat people, especially at infants orthe aged.
Do not try to repair or reconstruct by yourself.
Do not use for the purpose of storage offood, art work, precise equipment,breeding, or cultivation.
CAUTIONTake fresh air occasionally especiallywhen gas appliance is running at thesame time.
PROHIBITIONSTRICT
ENFORCEMENT
Do not operate the switch withwet hand.
PROHIBITION
PROHIBITION
PROHIBITION PROHIBITION
PROHIBITION
Do not install the unit near a fireplaceor other heating apparatus.
Check good condition of theinstallation stand
Do not pour water onto the unitfor cleaning
PROHIBITION
Do not place animals or plants inthe direct path of the air flow
Do not place any objects on orclimb on the unit.
Do not place flower vase or watercontainers on the top of the unit.
Do not insert objects into the airinlet or outlet.
PROHIBITION
PROHIBITION
PROHIBITION
STRICTENFORCEMENT
Check properinstallation of thedrainage securely
WARNING
17
Trouble shooting
NormalPerformanceinspection
Noise is heard
Phenomenon Cause or check points
The system
immediately.
Smells aregenerated.
Mist or steam are
Multiplecheck
Poor cooling
When unit is stopped, it won't restart
elapsed to protect the system.When the electric plug is pulled out and reinserted, the protection circuit
During unit operation or at stop, a swishing or gurgling noise may
(This noise is generated byrefrigerant flowing in the system.)During unit operation, a crackingnoise may be heard.This noise is
temperature changes.Should there be a big noise from
filter may be too dirty.This is because the system circulates smells from the interior
During COOL or DRY operation,
This is due to the sudden cooling
Is power plug inserted?Is there a power failure?Is fuse blownout?Is the air filter dirty?
Are there any obstacles before
Is temperature set correctly?Are there some doors or
Is there any direct sunlightthrough the window during the
Are there too much heat sourcesor too many people in the room
In dry mode, fan speed can’t be changed.
In DRY mode, when room temperature
setting+2 oC,unit will run
regardless of FAN setting.
during cooling operation?
cooling operation?(Use curtain)
windows left open?
inlet and outlet?
Normally it should be cleaned every 15 days.
intermittently at LOW speed
becomes lower than temp.
indoor unit may blow out mist.
of indoor air.
air such as the smell of furniture,paint, cigarettes.
air flow in unit operation, air
generated by the casing expandingor shrinking because of
be heard.At first 2-3 minutes afterunit start, this noise is more noticeable.
will work for 3 minutes to protect theair conditioner.
immediately until 3 minutes have
Cautions
3. If the fuse of indoor unit on PC board isit with the type of T. 3.15A/ 250V outdoor
broken,change it with the type of T.25A/250V
The refrigerating circuit is leak-proof.
1.Applicable ambient temperature range:
Specifications
The machine is adaptive in following situation
The power plug and connecting cable must be compliant with local regulations.
2. If the power supply cord is damaged, it must be replaced manufacturer qualified person.
4. The wiring method should be in line with the local wiring
5. After installation, the power plug should be easily reached.
6. The waste battery should be disposed properly.
7. The appliance is not intended for use persons without supervision.
8.Young children should be supervisedwith the appliance.
9. Please employ the proper power plug,cord.
11.In order to protect the units,please turn30 seconds later, cutting off the power.
10.
CoolingIndoor
Maximum:D.B/W.B
Maximum:D.B/W.BD.B
Maximum:D.BD.B
Minimum:D.B/W.B
Maximum:D.B/W.BMinimum:D.B/W.B
Outdoor
Indoor
OutdoorHeating
32oC/23oC
24oC/18oCoC/-8oC
46oC/26oC18oC27oC
21oC/15oC
Outdoor Maximum:D.B/W.BMinimum:D.B
24oC/18oC-15oC(INVERTER)
oC
7-
Minimum:
Minimum:
or its service agent or a similar
broken,please. If the fuse of
standard.
by young children or
to ensure that they
which fit into the
off the A/C first,
Before asking for service, check the following first.
blown out.
does not restart
by the
changeunit is
infirm
do not play
power supply
and at least
15
Do not obstruct or cover the ventilationconditoner.Do not put fingersinlet/outlet and swing louver.
This appliance is not intended for use by persons (including children) with reduced physiced, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of appliance by person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
grille of the air or any other things into the
18
For Haier Appliances
Australia 1300 729 948 | haier.com.auNew Zealand 0800 424 372 | haier.co.nz
Important notice of Disclosure: Copyright © Fisher & Paykel Appliances 2019. All rights reserved. The product dimensions and specifi cations in this document apply to the specifi c products and models described at the date of issue. Under our policy of continuous product improvement, these dimensions and specifi cations may change at any time. You should therefore check with your dealer or Haier’s Customer Care Centre to ensure this fl yer correctly describes the products currently available.
Fisher & Paykel Australia Pty Ltd, Level 1, 1 Eden Park Drive, Macquarie Park, NSW 2113. Phone Customer Care: 1300 729 948 Email: [email protected]
Fisher & Paykel Appliances Ltd, 78 Springs Road, East Tamaki, Auckland 2013.Phone Customer Care: 0800 424 372. Email: [email protected]