Upload
elytronic
View
261
Download
10
Tags:
Embed Size (px)
DESCRIPTION
Artcoustic Loudspeakers www.artcoustic.com TM We also offer a bespoke printing service where you can provide an image, for example a commissioned artwork or photograph, and we print this on to screens for your speakers. As the screens are interchangeable the image can be changed whenever you like. You choose how your speakers look, so they always complement rather than conflict with any interior design. www.artcoustic.com One Brand, Endless Options Better, by Design
Citation preview
2012ArtcousticLoudspeakersTM
www.artcoustic.com
www.artcoustic.com
Better, by Design
Usually in the world of sound and cinema, you have to choose between great design and great performance. There are exceptions of course, but in general, that’s the way it is. Especially when it comes to loudspeaker design; if it looks good, it’s unlikely to sound good, and for some reason, if it sounds good, it very rarely looks good. At Artcoustic, we have never accepted this idea. So when you buy an Artcoustic speaker, you get the best of both worlds. They sound great, because we have brought years of knowledge and experience to bear on designing speakers that reproduce music and movie soundtracks faithfully, accurately and in breathtaking detail and they appeal to the eye because we came up with the idea of interchangeable screens. Quite simply, you choose how your speakers look. We have a wide portfolio of beautiful patterns and designs, and of pictures from artists and photographers including an array of iconic images from the Getty Images Gallery. We also offer a bespoke printing service where you can provide an image, for example a commissioned artwork or photograph, and we print this on to screens for your speakers. As the screens are interchangeable the image can be changed whenever you like. You choose how your speakers look, so they always complement rather than conflict with any interior design.
We also offer a bespoke printing service where you can provide an image, for example a commissioned artwork or photograph, and we print this on to screens for your speakers. As the screens are interchangeable the image can be changed whenever you like. You choose how your speakers look, so they always complement rather than conflict with any interior design.
Going back to the roots of traditional Danish loudspeaker design, Artcoustic has transformed the conventional loudspeaker with a modern look. We strive for perfect sound reproduction, using only the most advanced technology available. Artcoustic is a state-of-the-art product, a loudspeaker that is among the elite of high-end loudspeakers worldwide. The remarkable dynamic range and efficiency, far higher than conventional hi-fi designs, make Artcoustic loudspeakers the perfect solution for both high-end residential and commercial applications.
The Artcoustic loudspeaker is the first and only of its kind, combining a unique mix of art and design with the science of acoustics.
One Brand, Endless Options
In search of the near perfect loudspeaker design
The new SL range is the result of over 12 years research and development, and utilises the very latest drive unit and crossover technology. The SL range has been subjected to 3 years of intensive testing and design, with 6 months of fine tuning to deliver a truly unique and ground breaking loudspeaker range. The challenge was to create a loudspeaker capable of the dynamics and power of a horn loaded design, but with the accuracy and quality of a hi-fi design. The solution was to employ an array of world class drive units to provide incredible efficiency, output and accuracy, whilst also staying true to Artcoustic's signature design ethos.
The SL range is designed to be complimentary and flexible, allowing the correct model to be specified for the correct application. From small flat screen TV based systems to
state-of-the-art private cinemas, as well as bars, restaurants, places of worship, in fact, anywhere where high performance sound is required. With consistent timbre and sound qualities throughout the range, the correct model is the one that delivers the output levels desired together with aesthetics to suit the environment. Artcoustic's huge portfolio of artworks and designs uniquely allows serious quality sound to be installed with no compromise to the interior design, and due to the large and expansive SL range, there is always a model to suit the application.
The SL range is a revolution in loudspeaker design, delivering efficiency as high as 104 db, with output up to 130dB, and all in a range just 67mm deep and stunning to look at.
Audio and Cinema design, re-defined
www.artcoustic.com
Modular 1-1 SLArtcousticLoudspeakersTM
Two-Way Precision Monitor
This multi purpose monitor shares many characteristics with the other models in the SL range. Maintaining Artcoustic’s clean contemporary design, the Modular SL has been designed to match all modern flat screen monitors and can be mounted horizontally or vertically. The Modular SL is perfect for the most demanding of applications. Partner it with an Artcoustic Subwoofer for a truly full range, dynamic performance.
Oversized baffles Modular 38-29 and Modular 65-50 can be added to the single compact Modular 1-1, to make the speaker solution more of a feature as required.
This new range incorporates all the renowned Artcoustic aesthetic design and reference sound quality.
Artcoustic Modular is designed to be installed either as an elegant ON-WALL solution or probably the world's best looking IN-WALL option.
www.artcoustic.com
Specification Modular 1-1 SL
Transducer:LF-MF 1 x 3 inch coneHF 1 x 1 inch Dual Ring Radiator, Symmetric Phase Aligned
Crossover:Low Pass Filter 6 dB/octave 1000 Hz High Pass 12 dB/octave 4000Hz
Connection:Single Amped Gold Plated Push Terminals
Performance: Operating Range 65 Hz (-3dB) to 40 kHz Nominal Beamwidth Horizontal 90° Vertical 90°
Axial Sensitivity (whole space SPL) LF/MF-HF 87 dB
Input Impedance Nominal Minimum 8 ohms
Recommended High Pass Filter =>80 Hz, 24 dB/octave
Maximum Power Handling 50 Watt
Calculated Axial Output Limit (whole space SPL) Average Peak LF/MF-HF 104dB
Weight 2.2 kg
Dimensions H: 100 W: 250 D: 60 mm
Finish:Silk Paint, Black, White and RAL coloursGrille options: Match System fabricsOptional Baffles: Match System and DigitalPrint
Modular 1-1 SL
Modular 1-1 SL with optional 38-29 oversized baffle and grille
Modular 1-1 SL with optional 65-50 oversized baffle and grille
Small Speaker, Big Sound!
Modular LCR and Cinema SLArtcousticLoudspeakersTM
Multi Channel TV Sound Bar
Artcoustic pioneered the concept of incorporating front left, right and centre channel speakers in one unit. With the Modular Cinema we have taken it one step further and added 2 optional reversed phase rear speaker units. This flexible design make it possible for the Modular Cinema to serve as either an LCR and rear all in one, or as one high end centre channel speaker.
The Modular Cinema is the smallest all in one speaker Artcoustic has ever produced and at just H78mm x W650mm x D54mm it is perfectly suited to ever thinner on wall LED and LCD screens.The standard Match system screen are available and it can be upgraded with oversized baffles to ensure they suit any system and any interior design. Just choose the size, and your Modular cinema system is perfect for your living space and preferred screen size. Performance is assured with very high end 3.5”' full range drive units.
The Modular Cinema is designed for on-wall and in-wall applications.www.artcoustic.com
Specification Modular LCR SL
Transducer:LF-MF-HF 3 x 3 inch cone
Crossover:Fullrange
Connection:Single Amped Gold Plated Push Terminals, L,C,R.
Performance: Operating Range 80 Hz (-3dB) to 20 kHz
Nominal Beamwidth Horizontal 90° Vertical 90°
Axial Sensitivity (whole space SPL) LF/MF-HF Mono 93 dB stereo 87 dB
Input Impedance Nominal Minimum Mono 4 ohms Stereo 8 ohms
Recommended High Pass Filter =>80 Hz, 24 dB/octave
Maximum Power Handling 80 Watt
Calculated Axial Output Limit (whole space SPL) Average Peak LF/MF-HF Mono 105dB Stereo 99dB
Weight 7 kg
Dimensions H: 78 W: 650 D: 54 mm
Finish:Silk Paint, Black, White and RAL coloursGrille options: Match System fabrics
Multi Channel Sound Bar With Optional Oversized Baffles
Specification Cinema SL
Transducer:LF-MF-HF 5 x 3 inch cone
Crossover:Fullrange
Connection:Single Amped Gold Plated Push Terminals, L,C,R. R
Performance: Operating Range 80 Hz (-3dB) to 20 kHz
Nominal Beamwidth Horizontal 90° Vertical 90°
Axial Sensitivity (whole space SPL) LF/MF-HF Mono 93 dB stereo 87 dB
Input Impedance Nominal Minimum Mono 4 ohms Stereo 8 ohms
Recommended High Pass Filter =>80 Hz, 24 dB/octave
Maximum Power Handling 80 Watt
Calculated Axial Output Limit (whole space SPL) Average Peak LF/MF-HF Mono 105dB Stereo 99dB
Weight 8 kg
Dimensions H: 78 W: 650 D: 54 mm
Finish:Silk Paint, Black, White and RAL coloursGrille options: Match System fabrics
Modular LCR
Modular Cinema
42 inch oversized baffle
50 inch oversized baffle
C-1 SLArtcousticLoudspeakersTM
Two-Way Precision Monitor, with Symmetrically Controlled Beamwidth Array
This multi purpose monitor shares many characteristics with the other models in the SL range. Maintaining Artcoustic’s clean contemporary design, the C-1 SL has been designed to match all modern flat screen monitors and can be mounted horizontally or vertically. The C-1 SL is perfect for the most demanding of applications. Partner it with an Artcoustic Subwoofer for a truly full range, dynamic performance.
Wired as a single mono configuration, the C-1 SL is a highly sensitive speaker and is therefore capable of reproducing very high sound pressure levels from modest (20watt+) amplifiers.
The C-1 SL can be installed as a stereo speaker or as a single mono speaker
www.artcoustic.com
Specification C-1 SL
Transducer:LF-MF 2 x 3 inch cone, Symmetric Phase Aligned
HF 2 x 1 inch Dual Ring Radiator, Symmetric Phase Aligned
Crossover:Low Pass Filter 6 dB/octave 1000 Hz High Pass 12 dB/octave 4000Hz
Connection:Bi Amped Gold Plated Push Terminals, Stereo or Mono
Performance: Operating Range 65 Hz (-3dB) to 40 kHz
Nominal Beamwidth Horizontal 90° Vertical 90°
Axial Sensitivity (whole space SPL) LF/MF-HF Mono 93 dB stereo 87 dB
Input Impedance Nominal Minimum Mono 4 ohms Stereo 8 ohms
Recommended High Pass Filter =>80 Hz, 24 dB/octave
Maximum Power Handling 80 Watt
Calculated Axial Output Limit (whole space SPL) Average Peak LF/MF-HF Mono 105dB Stereo 99dB
Weight 5.5 kg
Dimensions H: 100 W: 650 D: 60 mm
Finish:Silk Paint, Black, White and RAL coloursGrille options: Match System fabrics
Compact Speaker Design with Optional Stereo or Mono Configuration
40-30 SLArtcousticLoudspeakersTM
The ‘40-30 SL’ is a unique addition to the Artcoustic range. It serves as a superb alternative to ceiling speakers when specified as part of a multi-room ‘Crestron/AMX/Control4/Sonos’ type installation.
These loudspeakers are perfect for demanding applications such as swimming pools, kitchens, gyms, dining rooms, bedrooms etc. Where a certain level of volume and quality is required but not at the expense of the aesthetics of the room.
The 40-30 SL can be installed as a stereo speaker or as a single mono speaker
www.artcoustic.com
Specification 40-30 SL
Transducer:LF-MF 6 x 3 inch cone, Symmetric Phase Aligned
HF 2 x 1 inch Dual Ring Radiator, Symmetric Phase Aligned
Crossover:Sub Filter Filter 12 dB/octave 70 Hz, Low Pass Filter 6 dB/octave 1000 Hz High Pass 12 dB/octave 4000Hz
Connection:Single or Bi Amped Gold Plated Push Terminals. Optional Stereo or Mono configuration
Performance: Operating Range 40 Hz (-3dB) to 40 kHz
Nominal Beamwidth Horizontal 90° Vertical 90°
Axial Sensitivity (whole space SPL) LF/MF-HF (Mono) 93 dB (Stereo) 87 dB
Input Impedance Nominal Minimum (Mono) 4 ohms (Stereo) 6 ohms
Maximum Power Handling 80 Watt
Calculated Axial Output Limit (whole space SPL) Average Peak LF/MF-HF (Mono)106dB (Stereo) 99dB
Weight 10 kg
Dimensions H: 400 W: 300 D: 67 mm
Finish:Silk Paint, Black, White and RAL coloursGrille options: Match System fabrics andDigital print
Powerful Full Range Multi Room Speaker
Three-Way Optional Stereo or Mono Multi Room Speaker
65-50 SLArtcousticLoudspeakersTM
Two-Way Line Array Precision Monitor, with Vertical and Horizontal Symmetrically Controlled Beamwidth Array
The 65-50 SL are Engineered with the Artcoustic’s Symmetrically Controlled Beamwidth Array a ground breaking analogue in-house loudspeaker technology, which enables superior controlled directivity on both vertical and horizontal axis.
With Symmetrically Controlled Beamwidth Array technology, it is possible to achieve very high sound pressure levels without the use of compression horn, very low distortion, very low power consumption and very flat frequency response, but still maintain the desired typical horn qualities, such as directivity and throw. The SL range is very flexible with compact dimensions and incredible frequency response and very high volumes, it has qualities that make it a truly unique product range.
The ultra slim and lightweight cabinet design makes this series of speakers easy to install into any existing Architecture without sacrificing the aesthetics orthe all-important sound quality
The 65-50 SL Full Range version can be installed as a stereo speaker or as a single mono speaker
www.artcoustic.com
65-50 SL 4-2 65-50 SL 6-3 65-50 SL 8-4
Raw Power Meets Sophisticated Design and Top of The Class Acoustic Engineering
65-50 SL Full Range Stereo
Specification 65-50 SL4-2
Transducer:LF-MF 4 x 3 inch cone, Symmetric Phase Aligned
HF 2 x 1 inch Dual Ring Radiator, Symmetric Phase Aligned
Crossover:Low Pass Filter 6 dB/octave 1000 Hz High Pass 12 dB/octave 4000Hz
Connection:Single Amped Gold Plated Push Terminals
Performance: Operating Range 60 Hz (-3dB) to 40 kHz
Nominal Beamwidth Horizontal 90° Vertical 90°
Axial Sensitivity (whole space SPL) LF/MF-HF 95 dB
Input Impedance Nominal Minimum 4 ohms
Recommended High Pass Filter =>80 Hz, 24 dB/octave
Maximum Power Handling 100 Watt
Calculated Axial Output Limit (whole space SPL) Average Peak LF/MF-HF 112dB @ 28watt
Weight 7.5 kg
Dimensions H: 650 W: 500 D: 67 mm
Finish:Silk Paint, Black, White and RAL coloursGrille options: Match System fabricsOptional Baffles: Match System and DigitalPrint
65-50 SLArtcousticLoudspeakersTM
Specification 65-50 SL6-3
Transducer:LF-MF 6 x 3 inch cone, Symmetric Phase Aligned
HF 3 x 1 inch Dual Ring Radiator, Symmetric Phase Aligned
Crossover:Low Pass Filter 6 dB/octave 1000 Hz High Pass 12 dB/octave 4000Hz
Connection:Single Amped Gold Plated Push Terminals
Performance: Operating Range 65 Hz (-3dB) to 40 kHz
Nominal Beamwidth Horizontal 90° Vertical 90°
Axial Sensitivity (whole space SPL) LF/MF-HF 98 dB
Input Impedance Nominal Minimum 4 ohms
Recommended High Pass Filter =>80 Hz, 24 dB/octave
Maximum Power Handling 100 Watt
Calculated Axial Output Limit (whole space SPL) Average Peak LF/MF-HF 115dB @ 28watt
Weight 8 kg
Dimensions H: 650 W: 500 D: 67 mm
Finish:Silk Paint, Black, White and RAL coloursGrille options: Match System fabricsOptional Baffles: Match System and DigitalPrint
Specification 65-50 SL8-4
Transducer:LF-MF 8 x 3 inch cone, Symmetric Phase Aligned
HF 4 x 1 inch Dual Ring Radiator, Symmetric Phase Aligned
Crossover:Low Pass Filter 6 dB/octave 1000 Hz High Pass 12 dB/octave 4000Hz
Connection:Single Amped Gold Plated Push Terminals
Performance: Operating Range 70 Hz (-3dB) to 40 kHz
Nominal Beamwidth Horizontal 90° Vertical 90°
Axial Sensitivity (whole space SPL) LF/MF-HF 101 dB
Input Impedance Nominal Minimum 4 ohms
Recommended High Pass Filter =>80 Hz, 24 dB/octave
Maximum Power Handling 100 Watt
Calculated Axial Output Limit (whole space SPL) Average Peak LF/MF-HF 118dB @ 40watt
Weight 9 kg
Dimensions H: 650 W: 500 D: 67 mm
Finish:Silk Paint, Black, White and RAL coloursGrille options: Match System fabricsOptional Baffles: Match System and DigitalPrint
www.artcoustic.com
Specification SL Full Range Stereo
Transducer:LF-MF 6 x 3 inch cone, Symmetric Phase Aligned
HF 2 x 1 inch Dual Ring Radiator, Symmetric Phase Aligned
Crossover:Sub Filter Filter 12 dB/octave 70 Hz, Low Pass Filter 6 dB/octave 1000 Hz High Pass 12 dB/octave 4000Hz
Connection:Single or Bi Amped Gold Plated Push Terminals. Optional Stereo or Mono configuration
Performance: Operating Range 40 Hz (-3dB) to 40 kHz
Nominal Beamwidth Horizontal 90° Vertical 90°
Axial Sensitivity (whole space SPL) LF/MF-HF (Mono) 93 dB (Stereo) 87 dB
Input Impedance Nominal Minimum (Mono) 4 ohms (Stereo) 6 ohms
Maximum Power Handling 80 Watt
Calculated Axial Output Limit (whole space SPL) Average Peak LF/MF-HF (Mono)106dB (Stereo) 99dB
Weight 10 kg
Dimensions H: 400 W: 300 D: 67 mm
Finish:Silk Paint, Black, White and RAL coloursGrille options: Match System fabricsand Digital print
75-55 SLArtcousticLoudspeakersTM
Two-Way Line Array Precision Monitor, with Vertical and Horizontal Symmetrically Controlled Beamwidth Array
The 75-55 SL shares same characteristics as the smaller 65-50 SL with the main difference being the size of the cabinet and a slightly lower fs point. The two models match most modern Plasma and LED screens by complementing both size and design, as on the smaller 65-50 SL, the 75-55 SL these models are available with all the Match System colours and Digital prints.
The 75-55 SL Full Range version can be installed as a stereo speaker or as a single mono speaker
www.artcoustic.com
75-55 SL 4-2 75-55 SL 6-3 75-55 SL 8-4 75-55 SL Full Range Stereo
Specification 75-55 SL4-2
Transducer:LF-MF 4 x 3 inch cone, Symmetric Phase Aligned
HF 2 x 1 inch Dual Ring Radiator, Symmetric Phase Aligned
Crossover:Low Pass Filter 6 dB/octave 1000 Hz High Pass 12 dB/octave 4000Hz
Connection:Single Amped Gold Plated Push Terminals
Performance: Operating Range 60 Hz (-3dB) to 40 kHz
Nominal Beamwidth Horizontal 90° Vertical 90°
Axial Sensitivity (whole space SPL) LF/MF-HF 95 dB
Input Impedance Nominal Minimum 4 ohms
Recommended High Pass Filter =>80 Hz, 24 dB/octave
Maximum Power Handling 100 Watt
Calculated Axial Output Limit (whole space SPL) Average Peak LF/MF-HF 112dB @ 28watt
Weight 9.5 kg
Dimensions H: 750 W: 550 D: 67 mm
Finish:Silk Paint, Black, White and RAL coloursGrille options: Match System fabricsOptional Baffles: Match System and DigitalPrint
75-55 SLArtcousticLoudspeakersTM
Specification 75-55 SL6-3
Transducer:LF-MF 6 x 3 inch cone, Symmetric Phase Aligned
HF 3 x 1 inch Dual Ring Radiator, Symmetric Phase Aligned
Crossover:Low Pass Filter 6 dB/octave 1000 Hz High Pass 12 dB/octave 4000Hz
Connection:Single Amped Gold Plated Push Terminals
Performance: Operating Range 65 Hz (-3dB) to 40 kHz
Nominal Beamwidth Horizontal 90° Vertical 90°
Axial Sensitivity (whole space SPL) LF/MF-HF 98 dB
Input Impedance Nominal Minimum 4 ohms
Recommended High Pass Filter =>80 Hz, 24 dB/octave
Maximum Power Handling 100 Watt
Calculated Axial Output Limit (whole space SPL) Average Peak LF/MF-HF 115dB @ 28watt
Weight 10 kg
Dimensions H: 750 W: 550 D: 67 mm
Finish:Silk Paint, Black, White and RAL coloursGrille options: Match System fabricsOptional Baffles: Match System and DigitalPrint
Specification 75-55 SL8-4
Transducer:LF-MF 8 x 3 inch cone, Symmetric Phase Aligned
HF 4 x 1 inch Dual Ring Radiator, Symmetric Phase Aligned
Crossover:Low Pass Filter 6 dB/octave 1000 Hz High Pass 12 dB/octave 4000Hz
Connection:Single Amped Gold Plated Push Terminals
Performance: Operating Range 70 Hz (-3dB) to 40 kHz
Nominal Beamwidth Horizontal 90° Vertical 90°
Axial Sensitivity (whole space SPL) LF/MF-HF 101 dB
Input Impedance Nominal Minimum 4 ohms
Recommended High Pass Filter =>80 Hz, 24 dB/octave
Maximum Power Handling 100 Watt
Calculated Axial Output Limit (whole space SPL) Average Peak LF/MF-HF 118dB @ 40watt
Weight 11 kg
Dimensions H: 750 W: 550 D: 67 mm
Finish:Silk Paint, Black, White and RAL coloursGrille options: Match System fabricsOptional Baffles: Match System and DigitalPrint
www.artcoustic.com
Specification SL Full Range Stereo
Transducer:LF-MF 6 x 3 inch cone, Symmetric Phase Aligned
HF 2 x 1 inch Dual Ring Radiator, Symmetric Phase Aligned
Crossover:Sub Filter Filter 12 dB/octave 70 Hz, Low Pass Filter 6 dB/octave 1000 Hz High Pass 12 dB/octave 4000Hz
Connection:Single or Bi Amped Gold Plated Push Terminals. Optional Stereo or Mono configuration
Performance: Operating Range 40 Hz (-3dB) to 40 kHz
Nominal Beamwidth Horizontal 90° Vertical 90°
Axial Sensitivity (whole space SPL) LF/MF-HF (Mono) 93 dB (Stereo) 87 dB
Input Impedance Nominal Minimum (Mono) 4 ohms (Stereo) 6 ohms
Maximum Power Handling 80 Watt
Calculated Axial Output Limit (whole space SPL) Average Peak LF/MF-HF (Mono)106dB (Stereo) 99dB
Weight 10 kg
Dimensions H: 400 W: 300 D: 67 mm
Finish:Silk Paint, Black, White and RAL coloursGrille options: Match System fabrics andDigital print
120-36 SLArtcousticLoudspeakersTM
Two-Way Line Array Precision Monitor, with Vertical and Horizontal Symmetrically Controlled Beamwidth Array
www.artcoustic.com
Optional Wall Hanging or Floor Standing Compact Speaker Design With High Sound Pressure Levels and Incredible Dynamic Range
The 120-36 SL range is a very flexible speaker with compact dimensions and incredible frequency response and very high volumes, it has qualities that make it a truly unique Speaker.
The ultra slim and lightweight cabinet design makes this speaker easy to install into any existing Architecture without sacrificing the aesthetics or the all-important sound quality
Artcoustic’s Symmetrically Controlled Beamwidth Array is a ground breaking analogue in-house loudspeaker technology, which enables superior controlled directivity on both vertical and horizontal axis.
With Symmetrically Controlled Beamwidth Array technology, it is possible to achieve very high sound pressure levels without the use of compression horn, very low distortion, very low power consumption and very flat frequency response, but still maintain the desired typical horn qualities, such as directivity and throw.
Specification 120-36 SL
Transducer:LF-MF 12 x 3 inch cone, Symmetric Phase Aligned
HF 6 x 1 inch Dual Ring Radiator, Symmetric Phase Aligned
Crossover:Low Pass Filter 6 dB/octave 1000 Hz High Pass 12 dB/octave 4000Hz
Connection:Single Amped Gold Plated Push Terminals
Performance: Operating Range 65 Hz (-3dB) to 40 kHz
Nominal Beamwidth Horizontal 90° Vertical 90°
Axial Sensitivity (whole space SPL) LF/MF-HF 104 dB
Input Impedance Nominal Minimum 8 ohms
Recommended High Pass Filter =>80 Hz, 24 dB/octave
Maximum Power Handling 100 Watt
Calculated Axial Output Limit (whole space SPL)
Average Peak LF/MF-HF 121dB @ 40watt
Weight 12 kg
Dimensions H: 1200 (with Baseplate 1232) W: 360 D: 67 mm
Finish:Silk Paint, Black, White and RAL coloursGrille options: Match System fabrics andDigital print
180-43 SLArtcousticLoudspeakersTM
Two-Way Line Array Precision Monitor, with Vertical and Horizontal Symmetrically Controlled Beamwidth Array
www.artcoustic.com
SL Series Top Pedigree Model, A True All Star With Extreme Sound PressureLevel and remarkable Dynamic Range
The 180-43 SL is the top of the SL range speaker, a flexible design with compact dimensions and incredible frequency response, extreme volumes and transient response, it has qualities that makes it one of the most dynamic and true sounding speakers ever designed. The ultra slim and lightweight cabinet design makes this speaker easy to install into any existing Architecture without sacrificing the aesthetics or the all-important sound quality
Artcoustic’s Symmetrically Controlled Beamwidth Array is a ground breaking analogue in-house loudspeaker technology, which enables superior controlled directivity on both vertical and horizontal axis.
With Symmetrically Controlled Beamwidth Array technology, it is possible to achieve very high sound pressure levels without the use of compression horn, very low distortion, very low power consumption and very flat frequency response, but still maintain the desired typical horn qualities, such as directivity and throw.
Specification 180-43 SL
Transducer:LF-MF 24 x 3 inch cone, Symmetric Phase Aligned
HF 12 x 1 inch Dual Ring Radiator, Symmetric Phase Aligned
Crossover:Low Pass Filter 6 dB/octave 1000 Hz High Pass 12 dB/octave 4000Hz
Connection:Single Amped Gold Plated Push Terminals
Performance: Operating Range 65 Hz (-3dB) to 40 kHz
Nominal Beamwidth Horizontal 90° Vertical 90°
Axial Sensitivity (whole space SPL) LF/MF-HF 110 dB
Input Impedance Nominal Minimum 4 ohms
Recommended High Pass Filter =>80 Hz, 24 dB/octave
Maximum Power Handling 140 Watt
Calculated Axial Output Limit (whole space SPL)
Average Peak LF/MF-HF 130dB @ 30watt
Weight 20 kg
Dimensions H: 1800 (with Baseplate 1832) W: 430 D: 67 mm
Finish:Silk Paint, Black, White and RAL coloursGrille options: Match System fabrics andDigital print
120-43 SL SubArtcousticLoudspeakersTM
www.artcoustic.com
Optional Floor Standing Or Wall Hanging Single Cone Professional Subwoofer
For the ultimate in low-frequency performance, the 120-43 SL subwoofer delivers awesome bass reproduction, making it ideal for professional applications, such as recording and film studios, dedicated cinemas and fixed installations in general.
Employing one 10" SL long-throw woofers, and the SL bass system to reproduce low frequency signals accurately and effortlessly, with high power handling and extremely low distortion, right down to 20Hz.
The 120 -43 SL subwoofer is ideal for use in high-end installations where sound quality is paramount, such as mid-field to full-space studio monitoring, for private cinema installations, and for commercial use in bars, restaurants and corporate presentation facilities.
The 120-43 SL subwoofer is available with an optional PA-260: 300watt amplifier. Other high quality professional grade amplifier with a minimum of 300watt into 8 ohms can be used
Specification 120-43 SL sub
Transducer:LF 1 x 10 inch cones
Crossover:Optional Low Pass Filter 12 dB/octave 80 Hz
Connection:Single Amped Gold Plated Push Terminals
Performance: Operating Range 20 Hz (-3dB) to 120 Hz
Nominal Beamwidth omni directional Axial Sensitivity (whole space SPL) LF 98 dB
Input Impedance Nominal Minimum 6 ohms
Maximum Power Handling 300 WattCalculated Axial Output Limit (whole space SPL) Average Peak LF 116dB
Weight 30 kg
Dimensions H: 1200 (with baseplate 1232) W: 430 D: 153 mm
Finish:Silk Paint, Black, White and RAL coloursGrille options: Match System fabrics andDigital print
Single Cone High Efficiency Professional Subwoofer
180-43 SL SubArtcousticLoudspeakersTM
www.artcoustic.com
Top Of The SL line Optional Floor Standing or Wall Hanging Dual Cone Professional Subwoofer
Little need be said about this model. No less than two of the long throw 10" drivers have been installed for (literally) breathtaking performance!The 180-43 SL subwoofer delivers awesome bass reproduction. It is one of the most dynamic, powerful and controlled subwoofers on the market, making it ideal for professional applications, such as recording and film studios, dedicated cinemas and fixed installations in general. This model changes the way subwoofers are perceived. Employing two 10" SL long-throw woofers, and the SL bass system to reproduce low frequency signals accurately and effortlessly, with high power handling and extremely low distortion, right down to 15Hz. The 180-43 SL subwoofer is ideal for use in high-end installations where sound quality is paramount, such as mid-field to full-space studio monitoring, for private cinema installations, and for commercial use in bars, restaurants and corporate presentation facilities.
The 180-43 SL subwoofer is available with an optional PA-260: 300watt amplifier. Other high quality professional grade amplifier with a minimum of 300watt into 8 ohms can be used
Specification 180-43 SL sub
Transducer:LF 2 x 10 inch cones
Crossover:Optional Low Pass Filter 12 dB/octave 80 Hz
Connection:Single Amped Gold Plated Push Terminals
Performance: Operating Range 15 Hz (-3dB) to 120 Hz
Nominal Beamwidth omni directional Axial Sensitivity (whole space SPL) LF 104 dB
Input Impedance Nominal Minimum 4 ohms
Maximum Power Handling 300 Watt
Calculated Axial Output Limit (whole space SPL) Average Peak LF 122dB
Weight 50 kg
Dimensions H: 1800 (with baseplate 1832) W: 430 D: 153 mm
Finish:Silk Paint, Black, White and RAL coloursGrille options: Match System fabrics andDigital print
Dual Cone High Efficiency Professional Subwoofer
Micro and Duo SL SubArtcousticLoudspeakersTM
www.artcoustic.com
Optional Floor Standing or Wall Hanging Compact High Output Professional Subwoofers
The 'Panel Sub Micro', given its size, is the most impressive subwoofer in our range. Partnered with the PA-260 amplifier this subwoofer outputs to incredible levels whilst maintaining a level of finesse that would normally be associated with much larger and more expensive models. The 10" long throw drive unit that forms the basis of it's design is implemented throughout the rest of our range, hinting at the confidence we have in its capabilities.
The Duo SL subwoofer', It will come as no surprise to those who are already familiar with our model names and numbers that this subwoofer incorporates two of the drive units used in the Panel Sub Micro. This subwoofer, also shipped with the PA-260 amplifier is incredibly efficient and ideally suited to larger spaces, or those where that extra bit of output is required, but without the additional space normally required with subwoofers. The twin 10" units have a huge dynamic range and this subwoofer should be considered a worthy contender in an incredibly competitive class.
Specification Micro SL sub
Transducer:LF 1 x 10 inch cones
Crossover:Optional Low Pass Filter 12 dB/octave 80 Hz
Connection:Single Amped Gold Plated Push Terminals
Performance: Operating Range 25 Hz (-3dB) to 120 Hz
Nominal Beamwidth omni directional Axial Sensitivity (whole space SPL) LF 98 dB
Input Impedance Nominal Minimum 6 ohms
Maximum Power Handling 300 Watt
Calculated Axial Output Limit (whole space SPL) Average Peak LF 114dB
Weight 15 kg
Dimensions H: 450 W: 450 D: 185 mm
Finish:Silk Paint, Black, White and RAL colours
High Efficiency Professional Subwoofers
Specification Duo SL sub
Transducer:LF 2 x 10 inch cones
Crossover:Optional Low Pass Filter 12 dB/octave 80 Hz
Connection:Single Amped Gold Plated Push Terminals
Performance: Operating Range 25 Hz (-3dB) to 120 Hz
Nominal Beamwidth omni directional Axial Sensitivity (whole space SPL) LF 104 dB
Input Impedance Nominal Minimum 4 ohms
Maximum Power Handling 300 Watt
Calculated Axial Output Limit (whole space SPL) Average Peak LF 122dB
Weight 30 kg
Dimensions H: 500 W: 800 D: 185 mm
Finish:Silk Paint, Black, White and RAL colours
Linax SL SubArtcousticLoudspeakersTM
www.artcoustic.com
Extreme Power and Dynamic Engineered Around The BeautifulArtcoustic Linax Cabinet Design
Drawing on the success of our 'Linax' cabinet, the 'Linax Subwoofer' was developed to be aesthetically identical, hence allowing what could be argued as the most 'invisible' subwoofer installation possible. The drive unit array is the same as can be found in the 180-43 SL Sub and the performance is therefore equally impressive.
Employing two 10" SL long-throw woofers, and the SL bass system to reproduce low frequency signals accurately and effortlessly, with high power handling and extremely low distortion, right down to 15Hz. The Linax SL subwoofer is ideal for use in high-end installations where sound quality is paramount, such as private cinema and music systems installations.
The 180-43 SL subwoofer is available with an optional PA-260: 300watt amplifier. Other high quality professional grade amplifier with a minimum of 300watt into 8 ohms can be used
Linax SL sub
Transducer:LF 2 x 10 inch cones
Crossover:Optional Low Pass Filter 12 dB/octave 80 Hz
Connection:Single Amped Gold Plated Push Terminals
Performance: Operating Range 15 Hz (-3dB) to 120 Hz
Nominal Beamwidth omni directional Axial Sensitivity (whole space SPL) LF 104 dB
Input Impedance Nominal Minimum 4 ohms
Maximum Power Handling 300 Watt
Calculated Axial Output Limit (whole space SPL) Average Peak LF 122dB
Weight 30 kg
Dimensions H: 312 W: 1060 D: 520 mm
Finish:Black, white and RAL Silk paint
Dual Cone High Efficiency Professional Subwoofer
Superior Engineering and Cutting Edge Design For The Ultimate In Movie Theatreand In General Demanding Professional Applications
Spitfire SLArtcousticLoudspeakersTM
Two-Way Line Array Precision Monitor, with Vertical and Horizontal Symmetrically Controlled Beamwidth Array
The Spitfire SL Range brings the superb quality of Artcoustic to bespoke private home cinema installations, professional screening rooms, clubs and general commercial PA applications. The range is designed to deliver all the dynamics, power and subtlety demanded by today’s blockbuster soundtracks, whilst maintaining the Artcoustic ethos of discretion and design. All models are less than 7cm deep allowing reference private cinemas to be installed with the minimal space required behind acoustically transparent projection screens.
www.artcoustic.com
Two-Way Line Array Precision Monitor, with Vertical and Horizontal Symmetrically Controlled Beamwidth Array
Spitfire SLArtcousticLoudspeakersTM
Artcoustic’s Symmetrically Controlled Beamwidth Array is a ground breaking analogue in-house loudspeaker technology, which enables superior controlled directivity on both vertical and horizontal axis.
With Symmetrically Controlled Beamwidth Array technology, it is possible to achieve very high sound pressure levels without the use of compression horn, very low distortion, very low power consumption and very flat frequency response, but still maintain the desired typical horn qualities, such as directivity and throw.
The Spitfire SL range is very flexible with compact dimensions and incredible frequency response and very high volumes, it has qualities that make it a truly unique product range.
The ultra slim and lightweight cabinet design makes this series of speakers easy to install into any existing architecture without sacrificing the aesthetics orthe all-important sound quality
Spitfire SL 4-2 Spitfire SL 6-3 Spitfire SL 8-4
Spitfire SL 16-8
www.artcoustic.com
Specification Spitfire SL4-2
Transducer:LF-MF 4 x 3 inch cone, Symmetric Phase Aligned
HF 2 x 1 inch Dual Ring Radiator, Symmetric Phase Aligned
Crossover:Low Pass Filter 6 dB/octave 1000 Hz High Pass 12 dB/octave 4000Hz
Connection:Single Amped Gold Plated Push Terminals
Performance: Operating Range 60 Hz (-3dB) to 40 kHz
Nominal Beamwidth Horizontal 90° Vertical 90°
Axial Sensitivity (whole space SPL) LF/MF-HF 95 dB
Input Impedance Nominal Minimum 4 ohms
Recommended High Pass Filter =>80 Hz, 24 dB/octave
Maximum Power Handling 100 Watt
Calculated Axial Output Limit (whole space SPL) Average Peak LF/MF-HF 112dB @ 28watt
Weight 5.5 kg
Dimensions H: 500 W: 350 D: 67 mm
Spitfire SLArtcousticLoudspeakersTM
Specification Spitfire SL6-3
Transducer:LF-MF 6 x 3 inch cone, Symmetric Phase Aligned
HF 3 x 1 inch Dual Ring Radiator, Symmetric Phase Aligned
Crossover:Low Pass Filter 6 dB/octave 1000 Hz High Pass 12 dB/octave 4000Hz
Connection:Single Amped Gold Plated Push Terminals
Performance: Operating Range 65 Hz (-3dB) to 40 kHz
Nominal Beamwidth Horizontal 90° Vertical 90°
Axial Sensitivity (whole space SPL) LF/MF-HF 98 dB
Input Impedance Nominal Minimum 4 ohms
Recommended High Pass Filter =>80 Hz, 24 dB/octave
Maximum Power Handling 100 Watt
Calculated Axial Output Limit (whole space SPL) Average Peak LF/MF-HF 115dB @ 28watt
Weight 6 kg
Dimensions H: 500 W: 350 D: 67 mm
Specification Spitfire SL8-4
Transducer:LF-MF 8 x 3 inch cone, Symmetric Phase Aligned
HF 4 x 1 inch Dual Ring Radiator, Symmetric Phase Aligned
Crossover:Low Pass Filter 6 dB/octave 1000 Hz High Pass 12 dB/octave 4000Hz
Connection:Single Amped Gold Plated Push Terminals
Performance: Operating Range 70 Hz (-3dB) to 40 kHz
Nominal Beamwidth Horizontal 90° Vertical 90°
Axial Sensitivity (whole space SPL) LF/MF-HF 101 dB
Input Impedance Nominal Minimum 4 ohms
Recommended High Pass Filter =>80 Hz, 24 dB/octave
Maximum Power Handling 100 Watt
Calculated Axial Output Limit (whole space SPL) Average Peak LF/MF-HF 118dB @ 40watt
Weight 7 kg
Dimensions H: 500 W: 350 D: 67 mm
Specification Spitfire SL16-8
Transducer:LF-MF 16 x 3 inch cone, Symmetric Phase Aligned
HF 8 x 1 inch Dual Ring Radiator, Symmetric Phase Aligned
Crossover:Low Pass Filter 6 dB/octave 1000 Hz High Pass 12 dB/octave 4000Hz
Connection:Single Amped Gold Plated Push Terminals
Performance: Operating Range 75 Hz (-3dB) to 40 kHz
Nominal Beamwidth Horizontal 90° Vertical 90°
Axial Sensitivity (whole space SPL) LF/MF-HF 101 dB
Input Impedance Nominal Minimum 4 ohms
Recommended High Pass Filter =>80 Hz, 24 dB/octave
Maximum Power Handling 100 Watt
Calculated Axial Output Limit (whole space SPL) Average Peak LF/MF-HF 124dB @ 40watt
Weight 11 kg
Dimensions H: 844 W: 350 D: 67 mm
www.artcoustic.com
Spitfire SL SubwooferArtcousticLoudspeakersTM
Dual Cone High Efficiency Professional Subwoofer
For the ultimate in low-frequency performance, the Spitfire subwoofer delivers awesome bass reproduction. It is one of the most dynamic, powerful and controlled subwoofers on the market, making it ideal for professional applications, such as recording and film studios, dedicated cinemas and fixed installations in general. This model changes the way subwoofers are perceived. Employing two 10" SL long-throw woofers, and the SL bass system to reproduce low frequency signals accurately and effortlessly, with high power handling and extremely low distortion, right down to 20Hz. The Spitfire subwoofer is ideal for use in high-end installations where sound quality is paramount, such as mid-field to full-space studio monitoring, for private cinema installations, and for commercial use in bars, restaurants and corporate presentation facilities, including commercial movie theatres.
The Spitfire SL subwoofer is available with an optional PA-260: 300watt amplifier. Other high quality professional grade amplifier with a minimum of 300watt into 8 ohms can be used www.artcoustic.com
Specification Spitfire SL Subwoofer
Transducer:LF 2 x 10 inch cones
Crossover:Optional Low Pass Filter 12 dB/octave 80 Hz
Connection:Single Amped Gold Plated Push Terminals
Performance: Operating Range 20 Hz (-3dB) to 120 Hz Nominal Beamwidth omni directional Axial Sensitivity (whole space SPL) LF 104 dB Input Impedance Nominal Minimum 4 ohmsMaximum Power Handling 300 WattCalculated Axial Output Limit (whole space SPL) Average Peak LF 122dBWeight 30 kg Dimensions H: 844 W: 500 D: 150 mm
Finish:Black Paint
Professional Subwoofer In Extremely Compact Design For Easy InstallationBehind Cinema Projection Screens
Spitfire 180-43 SL SubArtcousticLoudspeakersTM
www.artcoustic.com
Top of The Line Optional Floor Standing or Wall Hanging Dual Cone Professional Subwoofer
Little need be said about this model. No less than two of the long throw 10" drivers have been installed for (literally) breathtaking performance! The Spitfire 180-43 SL subwoofer delivers awesome bass reproduction. It is one of the most dynamic, powerful and controlled subwoofers on the market, making it ideal for professional applications, such as recording and film studios, dedicated cinemas and fixed installations in general. This model changes the way subwoofers are perceived. Employing two 10" SL long-throw woofers, and the SL bass system to reproduce low frequency signals accurately and effortlessly, with high power handling and extremely low distortion, right down to 15Hz. The Spitfire 180-43 SL subwoofer is ideal for use in high-end installations where sound quality is paramount, such as mid-field to full-space studio monitoring, for private cinema installations, and for commercial use in bars, restaurants and corporate presentation facilities.
The Spitfire 180-43 SL subwoofer is available with an optional PA-260: 300watt amplifier. Other high quality professional grade amplifier with a minimum of 300watt into 8 ohms can be used
Specification 180-43 SL sub
Transducer:LF 2 x 10 inch cones
Crossover:Optional Low Pass Filter 12 dB/octave 80 Hz
Connection:Single Amped Gold Plated Push Terminals
Performance: Operating Range 15 Hz (-3dB) to 120 Hz
Nominal Beamwidth omni directional Axial Sensitivity (whole space SPL) LF 104 dB
Input Impedance Nominal Minimum 4 ohms
Maximum Power Handling 300 Watt
Calculated Axial Output Limit (whole space SPL) Average Peak LF 122dB
Weight 50 kg
Dimensions H: 1800 (with baseplate 1832) W: 430 D: 153 mm
Finish:Spitfire version: Black Spitfire Structure paintGrille options: Match System fabrics andDigital print
Dual Cone High Efficiency Professional Subwoofer
PA-260ArtcousticLoudspeakersTM
www.artcoustic.com
Professional Power Amplifier
Artcoustic PA-260 Professional Multi Purpose Amplifier.
Artcoustic has designed and engineered the PA-260 Professional Multi Purpose Amplifier. The PA-260 performs smoothly and accurately even in the most demanding conditions. The PA-260 is matched to all the Artcoustic loudspeakers’ impedance and tonality, making a perfect match with amazing detail, control and dynamics.
The PA-260 offers incredible 2 channel performance in a rack mountable chassis just 2U high. This together with it’s high performance and silent running dual fan speed cooling system means it is suitable for almost any application, from recording studios to commercial bars & restaurants, high quality hi-fi and home cinema systems. It features 2 mono blocks with a total of 300 watt 8ohm.
PA-260 Technical Specification
Output power 20Hz-20KHz RMS program channel4 ohm 180 WRMS8 ohm 130 WRMS
Output power 20Hz-20KHz RMS program bridged8 ohm 300 WRMSRecommended impedance 8 ohm
Input sensitivityRCA unbalanced 600mV/1kOhmDIN (Bang and Olufsen) 600mV/1kOhm S/N ratio channel 89dBFrequency response: 20Hz -20KHzTHD <0.05%Damping factor @ 8 ohm > 600Crosstalk > 45dBSlew rate 30V/ms.Power: 115V/230V ac 360VAProtection, heat, DC, short cut and soft startDimensions (H x W x D) : 89 x 484 x 92mm Weight : 6Kg
Diablo TargetArtcousticLoudspeakersTM
Two-Way Precision Monitor
The Diablo Target is an extremely versatile and accurate monitor speaker. Its compact size makes it easy to accommodate in the most space-restricted environments, while its performance and sheer power belie the size of the enclosure. Featuring one rippled dome tweeter that produces a consistent, uniform high frequency performance, the Diablo Target is capable of an extended frequency response of up to 40kHz at 92dB (1w +/-2dB) and very high sound pressure levels, even from low-powered (20W+) amplifiers.
The Diablo Target is ideally suited to home cinema use in a small to medium sized room, or for near-field studio monitoring applications. It will also do a great job in commercial environments such as bars, restaurants and corporate presentation facilities.The Target features one 5 1/2" woofer and can also be used in conjunction with an Artcoustic subwoofer for even better low-frequency performance.
www.artcoustic.com
Specification Diablo Target
Transducer:LF-MF 1 x 5.5 inch coneHF 1 x 1 inch Dual Ring Radiator, Symmetric Phase Aligned
Crossover:Low Pass Filter 6 dB/octave 1200 Hz High Pass 12 dB/octave 2800Hz
Connection:Single amped Gold Plated Push Terminals
Performance: Operating Range 55 Hz (-3dB) to 40 kHz Nominal Beamwidth Horizontal 90° Vertical 90°
Axial Sensitivity (whole space SPL) LF/MF-HF 92 dB
Input Impedance Nominal Minimum 8 ohms
Recommended High Pass Filter =>80 Hz, 24 dB/octave
Maximum Power Handling 150 Watt
Calculated Axial Output Limit (whole space SPL) Average Peak LF/MF-HF 106dB
Weight 3.5 kg
Dimensions H: 200 W: 200 D: 73 mm
Finish:Silk Paint, Black, White and RAL coloursGrille options: Match System fabrics
Powerful Full Range Performance, in Compact Design and Optional Pastel Colours
Diablo MonitorArtcousticLoudspeakersTM
Two-Way Precision Monitor
The iconic ‘Diablo Monitor’ is to date, one of our most popular loudspeakers. The success of this, can be attributed to the unbelievable performance achievable from such a small cabinet. The addition of the ‘Panel Sub Micro’ makes this a superb value offering for a complete 5.1 system.
www.artcoustic.com
Specification Diablo Monitor
Transducer:LF-MF 1 x 5.5 inch coneHF 2 x 1 inch Dual Ring Radiator, Symmetric Phase Aligned
Crossover:Low Pass Filter 6 dB/octave 1200 Hz High Pass 12 dB/octave 2800Hz
Connection:Single amped Gold Plated Push Terminals
Performance: Operating Range 45 Hz (-3dB) to 40 kHz Nominal Beamwidth Horizontal 90° Vertical 90°
Axial Sensitivity (whole space SPL) LF/MF-HF 92 dB
Input Impedance Nominal Minimum 8 ohms
Recommended High Pass Filter =>80 Hz, 24 dB/octave
Maximum Power Handling 150 Watt
Calculated Axial Output Limit (whole space SPL) Average Peak LF/MF-HF 106dB
Weight 4.5 kg
Dimensions H: 330 W: 270 D: 73 mm
Finish:Silk Paint, Black, White and RAL coloursGrille options: Match System fabrics andDigital Print
Powerful Full Range Performance, in Compact Design
Multi Channel TV Sound Bar
Artcoustic pioneered the concept of incorporating front left, right and centre channel speakers in one unit, and the evolution of this is the DF-Multi X2. Artcoustic’s flexible design make it possible for the DF-Multi X2 to serve as either an LCR all in one, or as one high end centre channel speaker.
The DF-Multi X2 produces stunning clarity with incredible dynamics – all in the most elegant design. As an LCR it is perfect for the most discrete flat screen home cinemas. As a high end centre channel it is breathtaking! The DF-Multi X2 incorporates four 4" woofers and six rippled dome tweeters, extending the high frequency response to 40kHz at 96dB (1w +/-2dB). The DF-Multi is ideal for small to medium sized home cinema installations, and for corporate presentation facilities. The DF-Multi is the first of its kind and it is an icon of Artcoustic’s innovative product development.
www.artcoustic.com
DF-MultiArtcousticLoudspeakersTM
60inch Multi without grille
60inch Multi with Match 8 Grille
The Worlds First and Original LCR Speaker
Specification DF-Multi 42 inch
Transducer:LF-MF 4 x 4 inch cone
HF 6 x 1 inch Dual Ring Radiator, Symmetric Phase Aligned
Crossover:Low Pass Filter 6 dB/octave 1200 Hz High Pass 12 dB/octave 2800Hz
Connection:Gold Plated Push Terminals
Performance: Operating Range 70 Hz (-3dB) to 40 kHz
Nominal Beamwidth Horizontal 90° Vertical 90°
Axial Sensitivity (whole space SPL) LF/MF-HF Multi Channelsl 90 dB. Single Channel Mono 100 dB
Input Impedance Multi Channel Minimum 8 ohms. Single Channel Mono 4 ohms
Recommended High Pass Filter =>80 Hz, 24 dB/octave
Maximum Power Handling 100 Watt
Calculated Axial Output Limit (whole space SPL) Average Peak LF/MF-HF Multi Channels 106dB @ 28watt. Single Channel Mono 114 dB
Weight 12 kg
Dimensions H: 150 W: 1030 D: 74 mm
Finish:Silk Paint, Black, White and RAL coloursGrille options: Match System fabrics
Specification DF-Multi 50 inch
Transducer:LF-MF 4 x 4 inch cone,
HF 6 x 1 inch Dual Ring Radiator, Symmetric Phase Aligned
Crossover:Low Pass Filter 6 dB/octave 1200 Hz High Pass 12 dB/octave 2800Hz
Connection:Gold Plated Push Terminals
Performance: Operating Range 70 Hz (-3dB) to 40 kHz
Nominal Beamwidth Horizontal 90° Vertical 90°
Axial Sensitivity (whole space SPL) LF/MF-HF Multi Channelsl 90 dB. Single Channel Mono 100 dB
Input Impedance Multi Channel Minimum 8 ohms. Single Channel Mono 4 ohms
Recommended High Pass Filter =>80 Hz, 24 dB/octave
Maximum Power Handling 100 Watt
Calculated Axial Output Limit (whole space SPL) Average Peak LF/MF-HF Multi Channels 106dB @ 28watt. Single Channel Mono 114 dB
Weight 13 kg
Dimensions H: 150 W: 1220 D: 74 mm
Finish:Silk Paint, Black, White and RAL coloursGrille options: Match System fabrics
Specification DF-Multi 60 inch
Transducer:LF-MF 4 x 5.5 inch cone,
HF 6 x 1 inch Dual Ring Radiator, Symmetric Phase Aligned
Crossover:Low Pass Filter 6 dB/octave 1200 Hz High Pass 12 dB/octave 2800Hz
Connection:Gold Plated Push Terminals
Performance: Operating Range 55 Hz (-3dB) to 40 kHz
Nominal Beamwidth Horizontal 90° Vertical 90°
Axial Sensitivity (whole space SPL) LF/MF-HF Multi Channelsl 90 dB. Single Channel Mono 100 dB
Input Impedance Multi Channel Minimum 8 ohms. Single Channel Mono 4 ohms
Recommended High Pass Filter =>80 Hz, 24 dB/octave
Maximum Power Handling 150 Watt
Calculated Axial Output Limit (whole space SPL) Average Peak LF/MF-HF Multi Channels 106dB @ 28watt. Single Channel Mono 114 dB
Weight 16 kg
Dimensions H: 150 W: 1500 D: 85 mm
Finish:Silk Paint, Black, White and RAL coloursGrille options: Match System fabrics
www.artcoustic.com
DF-MultiArtcousticLoudspeakersTM
Three-Way Full Range Precision Monitor
www.artcoustic.com
Powerful Full Range Floor Standing or Wall Hanging Speaker
The DFF180-43 PRO is the most powerful full range model in Artcoustic range, and the pinnacle of our achievements in loudspeaker design. Its performance is sublime, whether it’s reproducing blockbuster movie soundtracks or the most delicate, fragile piece of classical music. True to Artcoustic’s design ethos, the DFF180-43 PRO is beautifully elegant, offering all the design options to ensure that it remains stunning in any interior. The DFF180-43 PRO epitomises what Artcoustic stands for: World class performance, with stunning individual design. Truly unique. The DFF180-43 PRO incorporates two 10" X2 long-throw woofers, taking the bass response down to an incredible 15Hz. At this sort of frequency, you don’t so much hear the bass as feel it!. At the other end of the frequency spectrum, response extends to 18kHz at 100dB (1w +/-2dB), thanks to the constant directivity compression horn. The speakers can be wall-mounted or, with the addition of a removable base unit, used as floor stander.The DFF180-43 PRO is ideal for use in high-end installations, where sound quality is paramount, such as mid-field to full-space studio monitoring, for medium to large sized home cinema installations, and for commercial use in bars, restaurants and corporate presentation facilities, including commercial movie theatres. The DFF180-43 PRO is tri-wirable, enabling you to control the woofers, mid and compression horn independently.
Specification DFF180-43PRO
Transducer:
SUB 2 x 10 inch Long Throw cone
LF-MF 2 x 10 inch cone
HF 1 x 1.5 inch Compression Horn
Crossover:Low Pass Filter 6 dB/octave 48 Hz and 1200 Hz High Pass 12 dB/octave 2800Hz
Connection:Tri Amped Gold Plated Push Terminals
Performance: Operating Range 15 Hz (-3dB) to 40 kHz
Nominal Beamwidth Horizontal 90° Vertical 60°
Axial Sensitivity (whole space SPL) LF/MF-HF 99 dB
Input Impedance Nominal Minimum 4 ohms
Maximum Power Handling 350 Watt
Calculated Axial Output Limit (whole space SPL) Average Peak LF/MF-HF 122dB
Weight 50 kg
Dimensions H: 1800 (with Baseplate 1832) W: 430 D: 172 mm
Finish:Silk Paint, Black, White and RAL coloursGrille options: Match System fabrics andDigital print
DFF180-43PROArtcousticLoudspeakersTM
Spitfire MonitorArtcousticLoudspeakersTM
Trhee-Way Precision Studio Monitor
The Spitfire Monitor is a very accurate monitor loudspeaker, designed for smaller rooms (up to 60 sqm) It is a perfect option for hidden installations behind acoustically transparent screens.
Spitfire Monitor are used for professional monitoring by many artists pushing the boundaries. The Spitfire Monitor and Spitfire Subwoofers are chosen for their powerful, accurate performance together with their compact space saving design. A true reference system for the most demanding applications
www.artcoustic.com
Specification Diablo Monitor
Transducer:LF-MF 2 x 10 inch coneHF 2 x 1 inch Dual Ring Radiator, Symmetric Phase Aligned
Crossover:Low Pass Filter 6 dB/octave 1200 Hz High Pass 12 dB/octave 2800Hz
Connection:Bi amped Gold Plated Push Terminals
Performance: Operating Range 35 Hz (-3dB) to 40 kHz Nominal Beamwidth Horizontal 90° Vertical 90°
Axial Sensitivity (whole space SPL) LF/MF-HF 92 dB
Input Impedance Nominal Minimum 4 ohms
Maximum Power Handling 250 Watt
Calculated Axial Output Limit (whole space SPL) Average Peak LF/MF-HF 112dB
Weight 13 kg
Dimensions H: 500 W: 500 D: 150 mm
Finish:Black Paint and RAL colours
Powerful Full Range Performance, in Compact Professional Design
SuperstarArtcousticLoudspeakersTM
Trhee-Way MutiroomStereo Speaker
A passive stereo speaker with state-of-the-art superb sound quality and endless design options. Your music should sound amazing every time you play it and with the SUPERSTAR you hear every detail as intended!
The Superstar passive can be installed with any good quality 2 channel amplifier, or as recommended used in conjunction with a PA-260 power amplifier.
The interchangeable front screen gives you the freedom to choose the look of the front of the speaker, to personalise your SUPERSTAR and complement your interior, then change it when ever you like!
www.artcoustic.com
Specification Superstar Passive
Transducer:Sub 1 x 10 inch coneLF-MF 2 x 5.5 inch coneHF 2 x 1 inch Dual Ring Radiator,
Crossover:Sub 12 dB/octave 60 HzLow Pass Filter 6 dB/octave 1200 Hz High Pass 12 dB/octave 2800Hz
Connection:Bi amped Gold Plated Push Terminals
Performance: Operating Range 35 Hz (-3dB) to 40 kHz Nominal Beamwidth Horizontal 90° Vertical 90°
Axial Sensitivity (whole space SPL) LF/MF-HF 92 dB
Input Impedance Nominal Minimum 4 ohms
Maximum Power Handling 250 Watt
Calculated Axial Output Limit (whole space SPL) Average Peak LF/MF-HF 108dB
Weight 18 kg
Dimensions H: 650 W: 550 D: 150 mm
Finish:Silk Paint, Black, White and RAL coloursGrille options: Match System fabrics andDigital prints
Powerful Full Range Stereo Multi Room Speaker
Design Options
Artcoustic loudspeakers have an almost infinite choice of options, but the basics are simple and always a good place to start.
Cabinet Colours
Artcoustic Gallery
Artcoustic loudspeakers have an almost infinite number of design options. We offer black or white as standard, with bespoke RAL colour options available for the cabinets, and 8 standard colours for the screens with over 1500 designs within our design portfolio. If you want to personalise your loudspeakers beyond this, we can also print any image of your choosing to complete your Artcoustic loudspeaker design.
Artcoustic Match System
The Artcoustic Match System is an in-house developed textile process. The 8 colours available for the loudspeaker screens provide the opportunity to match colours to complement your interior. It has never been easier to change the look of your loudspeakers and make them a part of your interior. Use the colour swatches below as a guide.
Artcoustic Design OptionsArtcousticLoudspeakersTM
www.artcoustic.com
View the latest art portfolio online at www.artcoustic.com or download the app for iPad
Match 1
Match 2
Match 3
Match 4
Match 5
Match 6
Match 7
Match 8
Speaker with optional frame(Frame to ordered separately)
Black
White
RAL
Gloss finish
ArtcousticLoudspeakersTM
Artcoustic UK and Eire:
UK SHOWROOM (by appointment only)Unit 15 Eckersley RoadChelmsfordEssex CM1 1SLTel: 01245 [email protected]
Artcoustic Headquarter:
Tel: +45 32836060 Fax: +45 [email protected]