Upload
others
View
11
Download
0
Embed Size (px)
Citation preview
บริษัท อีทีที จำกัดETT CO., LTD.
Company reserves the right to change the detail and price of any productwithout any prior notice.
Tel : +66 (0) 2-7121120 Fax : +66 (0) 2-3917216e-mail : [email protected] www.etteam.com
ARM Cortex-M3 / ARM7 Product Catalog 2012El
ec
troni
cs
Tec
hno
log
y Te
am
27w
ww
.ette
am
.co
m
(P-ET-A-00453)ET-NXP ARM KIT LPC1769
(P-ET-A-00409)ET-NXP ARM KIT LPC1768
(P-ET-A-00454)ET-NXP ARM KIT LPC1769 & TFT LCD
(P-ET-A-00410)ET-NXP ARM KIT LPC1768 & TFT LCD
2 3
new
This is the ultimate ARM Board from NXP Company that includes many devices such as ETHERNET LAN, USB 2.0, USB HOST, SD CARD, RS232, TFT
LCD, 5-DIRECTIONAL JOY SWITCH and etc. There are 4 versions with 2 MCU as follows;
1. ET-NXP ARM KIT LPC1769 2. ET-NXP ARM KIT LPC1768
3. ET-NXP ARM KIT LPC1769 & TFT LCD 4. ET-NXP ARM KIT LPC1768 & TFT LCD
All of 4 versions have the same board and standard devices as follows;
• IN-SYSTEM PROGRAMING (ISP) and IN-APPLICATION PROGRAM (IAP) through ON-CHIP BOOT-LOADER through PORT RS232, it is
unnecessary to purchase any COPY PROGRAMMER.
• 20PIN PORT JTAG ARM Standard for REAL TIME DEBUGGER • ETHERNET LAN 10/100MB by using Connector 1-CH RJ45
• SD CARD Interface(MICRO SD) • PORT USB 2.0 FULL SPEED by using Connector TYPE B ON BOARD
• 2-CH 4PIN ETT PORT RS232 • 5-DIRECTIONAL JOY SWITCH
• Adjustable VR 10K as R for testing Circuit A TO D • LED to display status of 8-OUTPUT, 1-TACT SW, 1-MINI SPEAKER
• USB HOST TYPE A • RTC(internal MCU) with X™TAL 32.768KHz and BATTERY BACKUP
• AVAILABLE 22BIT GPIO for various application such as D/A, I2C, I
2S, CAN and INPUT/OUTPUT (it can interface with I/O 5V)
• 10PIN HEADER P2(0-7) for GPIO or FULL-DUPLEX SERIAL UART • 3PIN HEADER P0(26) for GPIO or D/A
• 3PIN HEADER P4(29) for GPIO • 4PIN HEADER P0(19-20) for GPIO or I2C BUS
• 4PIN HEADER P0(0-1) and P0(4-5) for GPIO or CAN 1 and CAN2 BUS
• 5PIN HEADER P0(23-25) and P2(11-13) for GPIO and I2S-RX and I
2S-TX
• 5VDC/850mA POWER SUPPLY for board (it is compatible with šET-SWITCHING ADAPTER 5V 1.2A TYPE B› (A-A-A-00079) *170.-); it uses 2PIN
Connector or it uses POWER SUPPLY from USB CONNECTOR TYPE B
• PCB SIZE: 15.3 x 9 cm.
• All 4 board versions consist ofˆ
1. Board
2. CD-ROM User™s Manual and Example Programs
3. Cable DOWNLOAD ET-RS232 DB 9 PIN
• MCU ARM CORTEX M3 No.LPC1769 that is 32BIT and 100PIN (TQFP)
with 512KB FLASH MEMORY, 64KB RAM, A TO D 12 BIT, D TO A 10 BIT
and etc.
• X™ TAL 12.00MHz for Phase-Locked-Loop and it can run at the maximum
frequency of 120MHz
• Part of standard devices on board
• (Can purchase and install šBoard ET-TFT240320TP-3.2 REV.B›
into this board; in this case, it installs more CONNECTOR 2x20 and 1x20)
ET-NXP ARM KIT LPC1769 consists of ˆ
• ET-NXP ARM KIT LPC1769
• TFT COLOR LCD with TOUCH SCREEN 240x320 PIXEL, 32" wide
Screen, and 65536 Colored Resolution
• CHIP TOUCH SCREEN CONTROLLER No.ADS7846 (ON BOARD)
ET-NXP ARM KIT LPC1769 & TFT LCD consists of ˆ
• MCU ARM CORTEX M3 No.LPC1768 that is 32BIT and 100PIN (TQFP)
with 512KB FLASH MEMORY, 64KB RAM, A TO D 12 BIT, D TO A 10 BIT
and etc
• X™TAL 12.00MHz for Phase-Locked-Loop and it can run at the maximum
frequency of 100MHz
• Part of standard devices on board
• (Can purchase and install š Board ET-TFT240320TP-3.2 REV.B › into this
board; in this case, it installs more CONNECTOR 2x20 and 1x20)
ET-NXP ARM KIT LPC1768 consists of ˆ
• ET-NXP ARM KIT LPC1768
• TFT COLOR LCD with TOUCH SCREEN 240x 320PIXEL, 32" wide
Screen, and 65536 Colored Resolution
• CHIP TOUCH SCREEN CONTROLLER No.ADS7846 (ON BOARD)
ET-NXP ARM KIT LPC1768 & TFT LCD consists of ˆ
new