Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Technical Specification
Titel Datasheet ARENS RVI Sail
Dok.-Nr. / Rev. TS-000050 / 05 / EN
Mat.-Nr.
Datum 30.01.2019
Seite 1 von 9
Copyrights according to ISO 16016 beachten
Arens GmbH Metallbau & Bauschlosserei, An der Industriebahn 23, 13088 Berlin, Germany // e-Mail: [email protected]
ARENS RVI Sail The ready-to-install propulsion system for sailboats
Datasheet ARENS RVI Sail - TS-000050 / 05 / EN Seite 2 von 9
Copyrights according to ISO 16016
Arens GmbH Metallbau & Bauschlosserei, An der Industriebahn 23, 13088 Berlin, Germany // e-Mail: [email protected]
Content
1 Description .......................................................................................................................................................... 3
2 Technical Data .................................................................................................................................................... 4
2.1 System Features ......................................................................................................................................... 4
2.2 Performance Curves ................................................................................................................................... 5
2.3 Illustrations ................................................................................................................................................. 6
2.4 System Design ............................................................................................................................................ 7
2.5 Main Dimensions ........................................................................................................................................ 8
2.6 Installation on hull ...................................................................................................................................... 9
Datasheet ARENS RVI Sail - TS-000050 / 05 / EN Seite 3 von 9
Copyrights according to ISO 16016
Arens GmbH Metallbau & Bauschlosserei, An der Industriebahn 23, 13088 Berlin, Germany // e-Mail: [email protected]
1 Description
Ready-to-install Propulsion System – ARENS RVI SAIL 15
The ARENS RVI SAIL 15 is suitable for small runabouts and sailing boats. The engine, foundation and Saildrive
are designed as a complete system which, at 45 kg, is only half the weight of comparable systems and requires
40% less installation space. A real innovation is the plug-and-play principle, which allows the engine to be
removed quickly and easily when maintenance is required.
Powerhead – ARENS RVI 378-2Z
The heart of the system is a highly compact engine with designation "ARENS RVI 378-2Z". It delivers 11.04 kW
(15 PS) at 4,300 rpm and is the world's first inboard engine based on a two-stroke boxer engine with common
rail direct injection. The closed fuel system allows operation in unventilated engine compartments. Due to its
boxer construction, the ARENS RVI engine runs very smoothly and is low in vibration. Power is controlled via a
sensor on the throttle lever and no longer requires a throttle mechanism. With a maximum charge current of
58 A, the built-in generator delivers four times the charge current of outboard motors with the same power
output. The ARENS RVI SAIL 15 can compete with inboard diesel engines with its fuel consumption of only two
litres per hour at cruising speed.
Transmission and Foundation – ARENS RVI Saildrive
For the installation of the system, a supplied foundation is inserted into the hull of the boat, which is provided
with a mounting frame and serves to fasten the engine and Saildrive. The RVI power head and its leads can be
detached from the boat with just a few hand movements using quick-release couplings. At a weight of 35 kg,
lifting out does not require any lifting equipment. What's more, with its box dimensions of only 600 x 430 x 300
mm, the motor is extremely compact and easy to transport. This makes uncomplicated shipping in a crate
possible, which eliminates the need to transfer the entire boat to a service workshop for maintenance. The
expenditure for stationary wintering or maintenance is considerably lower compared to conventionally installed
diesel engines.
Advantages
The ARENS RVI Sail 15 is an alternative to outboards, as they are usually used on smaller sailing boats. With
this system, operational comfort and manoeuvrability can be significantly improved. Of course, its use is also
possible in other boat types where weight and installation space are limiting factors. Last but not least, the
ARENS RVI APP offers the possibility to inform yourself about the operating status of the engine via smartphone.
Datasheet ARENS RVI Sail - TS-000050 / 05 / EN Seite 4 von 9
Copyrights according to ISO 16016
Arens GmbH Metallbau & Bauschlosserei, An der Industriebahn 23, 13088 Berlin, Germany // e-Mail: [email protected]
2 Technical Data
2.1 System Features
Powerhead ARENS RVI 378-2Z (2-cylinder boxer engine, displacement 379 cc)
Output 11.04 kW (15 HP) at 4,300 rpm; optional: up to 22.06 kW (30 HP) at 6,500 rpm
Generator 12 V / 58 A with integrated charge regulator
Electric Starter 12 V / 0.6 kW (starter battery required)
Ignition Electronically controlled spark ignition
Cooling System Single circuit system, incl. salt water pump
Fuel System Gasoline direct injection incl. pre-feed pump and pressure regulator filter
Lubricant System Incl. 1 litre lubricant reservoir with pump
Exhaust System Water-cooled exhaust collector for connection to exhaust hose
Power Control Via E-Gas (de-throttled operation, sensoric - no throttle cable necessary)
Engine Control (ECU) Fully automatic control of all engine operating parameters
Dimensions mm L x W x H 600 x 430 x 300 mm
Dry Weight 35 kg
Saildrive-System ARENS RVI Saildrive
Foundation Ready to install incl. device for vibration-damped fastening of the motor to the
foundation and sealing against seawater
Underwater Part Ready to install incl. reversing gear and propeller
Remote Control Ready to install, incl. single-lever circuit with sensor, ignition lock, push button for
electric starter
Weight 17 kg
Additional Options
Self-sufficient Tank System Combination tank incl. pressure regulating filter, pre-feed pump and quick couplings,
10 litres fuel and 1 litre lubricant (other sizes on request)
Data Interfaces CAN, serial, Bluetooth module (connection possibility to ARENS RVI App1)
1 Android OS required
Datasheet ARENS RVI Sail - TS-000050 / 05 / EN Seite 5 von 9
Copyrights according to ISO 16016
Arens GmbH Metallbau & Bauschlosserei, An der Industriebahn 23, 13088 Berlin, Germany // e-Mail: [email protected]
2.2 Performance Curves
Abbildung 1 Power
Abbildung 2 Torque
0
2
4
6
8
10
12
1250 1750 2250 2750 3250 3750 4250 4750
Po
we
r O
utp
ut
[kW
]
Crankshaft Speed [rpm]
Power Arens RVI Sail 15
Propeller power curve
Output crankshaft
Output prop shaft
5
10
15
20
25
30
35
1250 1750 2250 2750 3250 3750 4250 4750
Cra
nk
sha
ft T
orq
ue
[N
m]
Crankshaft Speed [rpm]
Torque Arens RVI Sail 15
Datasheet ARENS RVI Sail - TS-000050 / 05 / EN Seite 6 von 9
Copyrights according to ISO 16016
Arens GmbH Metallbau & Bauschlosserei, An der Industriebahn 23, 13088 Berlin, Germany // e-Mail: [email protected]
2.3 Illustrations
600 mm Crankshaft Axis
30
0 m
m
43
0 m
m
300 mm
Combination tank for fuel and lubricant
(different sizes available on request)
Datasheet ARENS RVI Sail - TS-000050 / 05 / EN Seite 7 von 9
Copyrights according to ISO 16016
Arens GmbH Metallbau & Bauschlosserei, An der Industriebahn 23, 13088 Berlin, Germany // e-Mail: [email protected]
2.4 System Design
The ARENS RVI Sail consists of the powerhead (combustion engine) and the saildrive system, which includes a
powerhead pick-up device on the foundation, the foundation itself, a boot seal, and the underwater part. The
outer and inner wall of the foundation box shall be trimmed to the hull shape of the ship. The cut edges of the
foundation box must be permanently and watertightly connected to the hull by lamination!
Kraftkopf
01 generator
02 electric starter (rückseitig)
03 seawater pump
04 exhaust collector
05 electronic control unit (ECU)
Saildrive-System
06 mounting plate
07 fastening plate
08 elastomeric bearing
09 sealing collar
10 foundation box (GPR)
10.a inner foundation wall
10.b outer foundation wall
11 cut edge
12 lower unit
ARENS RVI Saildrive
(saildrive)
01 ARENS RVI 378-2Z Sail
(powerhead)
03
04
02
05
06
07
11
10
09
14
08
ARENS RVI Sail
(foundation)
10.b
10.a
Datasheet ARENS RVI Sail - TS-000050 / 05 / EN Seite 8 von 9
Copyrights according to ISO 16016
Arens GmbH Metallbau & Bauschlosserei, An der Industriebahn 23, 13088 Berlin, Germany // e-Mail: [email protected]
2.5 Main Dimensions
Datasheet ARENS RVI Sail - TS-000050 / 05 / EN Seite 9 von 9
Copyrights according to ISO 16016
Arens GmbH Metallbau & Bauschlosserei, An der Industriebahn 23, 13088 Berlin, Germany // e-Mail: [email protected]
2.6 Installation on hull
The walls of the fundament box will be cutted out according to the shape of the hull and stable connected by
lamination. The inner circular shaped wall is used for the implementation of the lower unit. This wall will be also
laminated to the hull, such that the connection is watertight.
Abbildung 3 Installation fundament box to boat hull
Abbildung 4 Installation example HAI 760