Upload
nadeem-ahmed
View
230
Download
0
Embed Size (px)
Citation preview
7/31/2019 ARC FRP Catalogue
http://slidepdf.com/reader/full/arc-frp-catalogue 1/10
GRP/FRP Cable Management System
+ Cable trays
+ Cable ladders
+ Trunking & accessories
www.arcinsulations.com
Works:
Village: Ramdevpur, P.O.: Bawali
P.S.: Bishnupur, Dist.: 24 Pgs(S)
West Bengal, India
Tel: +91 33 2495 4231
Fax: +91 33 2495 4233E-mail: [email protected]
Correspondence:
Flat 25B, Tower - A
South City
375, Prince Anwar Shah Road
Kolkata - 700 064
West Bengal, IndiaMobile: +91 9830433678, 9748708809
D e s i g n e d b y : T e c h n o V i s i o n , C a l c u t t a , I n d i a . | g h o s h g r a p h i c s @ g m a i l . c o m
7/31/2019 ARC FRP Catalogue
http://slidepdf.com/reader/full/arc-frp-catalogue 2/10
GRP/FRPCable Management
SystemsUncompromised
Insulat ion Qual i ty The growing use of composites as an alternative to traditional materials such as
steel, aluminium, etc, is basically due to the specific characteristics of the
composite, such as:
• The unique resistance to corrosion contributes to reduce the life cycle
costs of the composite installation.
• A specific mechanical strength is higher at lower weight, in comparison to
conventional materials of construction.
• Easy & quick installation.
• High electrical Insulation properties.
Above all durability & resistance to corrosion lead to lower costs during the life
of installation.
The ARCFRP Cable trays are designed & manufactured to provide a stable &
dependable cable support in highly corrosive applications. From power plants
to fertilizer industries, paper mills to refineries & laboratories, sound electrical
design requires an adaptable cable support system that is reliable. The
ARCFRP Cable trays provide a solution for cabling networks that must be
upgraded, reconfigured or relocated, The variety and sophistication of
overhead distribution systems offer greater choice in selecting the right cable
tray for new construction and retrofit applications. Whether concealed in
suspended ceilings or installed in open overhead spaces, cable trays offer a
high degree of flexibility, both in terms of locating the components andaccessing the cabling contained within them. The ARCCable Support Systems
possess unique properties which enable them to resist many corrosive
environments, particularly where conditions indicate that conventional materials
will not provide art economic service life.
Constructed from glass reinforced thermoset Isopthalic resins, ARCCable
Support Systems are designed and manufactured with a structural integrity
normally only associated with steel and aluminum, but without their corrosion,
weight and electrical conduct ivity problems.
7/31/2019 ARC FRP Catalogue
http://slidepdf.com/reader/full/arc-frp-catalogue 3/10
7/31/2019 ARC FRP Catalogue
http://slidepdf.com/reader/full/arc-frp-catalogue 4/10
7/31/2019 ARC FRP Catalogue
http://slidepdf.com/reader/full/arc-frp-catalogue 5/10
7/31/2019 ARC FRP Catalogue
http://slidepdf.com/reader/full/arc-frp-catalogue 6/10
7/31/2019 ARC FRP Catalogue
http://slidepdf.com/reader/full/arc-frp-catalogue 7/10
• These are manufactured by assembling various cross sections like side runners / 'C' channels
and rungs. According to the loading condition, a suitable 'C' channel is selected.
• The working (allowable) load capacity represents the ability of fibreglass cable ladder to support
the static weight of the cables. It is equivalent to the destruction load capacity, with a minimum
safety factor of 1.5.
• The longitudinal members or side runners are the pultruded 'C' sections, which provide excellent
strength.
• The Cable Ladder width is the distance between two channels which is fitted by rungs / unistruts.
It is the length of the rung / unistruts, between the two channels. The rungs / unistruts are inverted
channels of 40 mm width x 20 mm depth and 4 mm thickness. The rungs are secured to the side
runners / longitudinal members by SS 304 / SS 316 fasteners. The rungs are designed toeliminate rolling over. Our rung / unistruts length range is 150 mm, 200 mm, 300 mm, 400, 450
mm, 500 mm, 600 mm, 750 mm, 900 mm, 1000 mm and 1200 mm.
• The Cable Ladder length is the length of the side runner / 'C' channels. Our range is 3000 mm
length.
• The Cable Ladder rang spacing is the distance between two rungs / unistruts. Our rung spacing
is 300 mm.
• The Cable Ladder height is the height of the side runner / 'C' channel. Our range is 100 mm and
150 mm.
• The Cable Ladder tray thickness is the thickness of the side runner / 'C' channel. Depending
upon the load condition the thickness is selected. Our range is 4 mm, 5mm and 6 mm.
• The fittings are used whenever cable needs to be bent at variable angles (90°, 60°) by using
variety of fitt ings. The fitt ings are mitered at 305 mm radius. Whenever the width of the cable
ladder needs to be changed, reducers are used. To run the cable three ways, 'T' fittings are used
and likewise to run a cable four ways 'Cross' fittings are used.
H - Height T - Thickness W - Width
(mm) (mm) (mm)
100 4 30
100 6 30
150 4 40
150 6 40
Model Nos. Width - W (mm) Height (mm) ARC-LT6 150 100/150
ARC-LT8 200 100/ 150
ARC-LT12 300 100/150
ARC-LT16 400 100/150
ARC-LT18 450 100/150
ARC-LT20 500 100/150
ARC-LT24 600 100/150
ARC-LT30 750 100/150
ARC-LT36 900 100/150
ARC-LT40 1000 100/150
ARC-LT48 1200 100/150
Specif icat ions
Cable Ladders
HT
W
3000
(STANDARD LENGTH)
RUNG
SIDE
MEMBER
300
(TYP)
150
COUPLER PLATE
1 0 0 / 1 5
0
W
4 / 6
SIDE MEMBER RUNG
GRP/FRP Cable Management Systems
7/31/2019 ARC FRP Catalogue
http://slidepdf.com/reader/full/arc-frp-catalogue 8/10
W (mm) L (mm) A (mm)152 1207 854
229 1314 930
305 1422 1006
457 1638 1159
610 1854 1311
762 2070 1464
914 2286 1616
Mitered Fit t ings for the Cable Ladders
W
L
A
R R
90° Horizontal Radius Bend
W (mm) A (mm)
152 330
229 406
305 483
457 635
610 787
762 940
914 1092
90° Horizontal Direct Bend
A
A
W
W
A
R
L
R A
W
L
W (mm) A (mm) L (mm)
100 530 749
150 530 749
200 530 749
W (mm) A (mm) L (mm)
100 505 714
150 555 786
200 606 857
90° Inside Vertical Radius Bend
90° Outside Vertical Radius Bend
Straight Reducer
W (mm) A (mm) L (mm)152 780 1410
229 850 1410
305 930 1410
457 1080 1640
610 1240 1880
762 1390 1880
914 1540 2110
Horizontal Radius Tee
W (mm) A (mm) L (mm)
152 780 1410
229 850 1410
305 930 1410
457 1080 1640
610 1240 1880
762 1390 1880
914 1540 2110
Horizontal Radius Cross
W1
W2
L
W1
W2
L
W1 (mm)
914 762 610 457 305 229
152 1105 1029 953 876 679 670
229 1067 991 914 838 670 - 305 1029 953 914 679 - -
457 953 908 679 - - -
610 908 679 - - -
762 679 - - - - -
L (mm)
W 2 ( m m )
Right or Left Hand Reducer
W1 (mm)
914 762 610 457 305 229 152 1410 1175 1175 940 940 705
229 1175 1175 940 940 705 -
305 1175 940 940 705 - -
457 940 940 705 - - -
610 940 705 - - -
762 705 - - - - -
L (mm)
W 2 ( m m )
GRP/FRP Cable Management Systems
W1
W 2
L
A
R
R
A W1W2
(A)
L
RR
7/31/2019 ARC FRP Catalogue
http://slidepdf.com/reader/full/arc-frp-catalogue 9/10
The perforated type, solid bottom, pre-drilled cable t ray are designed for light loads i.e. instrumentat ion
and control cables and for die transition from cable trays to individual control points.
• Load design is for a support span of 2.5 mtrs. Standard
tray length is 3.0 mtrs.
• Maximum deflection range 12.7 - 25.4 mm.
• Load bearing UDL for other models are available on
request.
Specif icat ionsPerfor ated Type Cabl e Trays
FRP Cable Tray covers
• Most economical installation with Thermo- plastic Drive Rivets
• Cover Hold Down Clamps allow cover to be removed for easy access to cables
• Available in ventilated & non-ventilated type.
Two nos. of Coupler / Splice Plates are required for each 3 mf rs. length of Cable Tray to be clamped
with nuts & bolts on two ends for connect ing it to another length of cable tray.
• Eliminates the Need to Drill or Punch Holes While Allowing
for Normal Expansion
• This Guide becomes a clamp with use of a 316 SS set
screw on top.
• Set SCREW is included with part.
• Guide is also easily adaptable for right or left sided
installations.
Peaked Caver Flat Cover
FRP Splice / Connector Plate
Cable Tray Hold Down Clamp
Perforated Load
Cable Tray bearing
Model No. UDL(Kg/mtr)
ARC -PT2A 11
ARC -PT2B 15
ARC -PT2C 18
ARC -PT2D 25
ARC -PT2E 30
Perforated Tray Runner Thickness
Cable Tray height - H width - W - T
Model No. (mm) (mm) (mm)
ARC -PT2A 50 50 3.0
ARC -PT2B 50 100 3.0
ARC -PT2C 50 150 3.0
ARC -PT2D 50 200 3.0
ARC -PT2E 50 300 3.0
ARC -PT3A 80 100 3.0
ARC -PT3B 80 150 3.0ARC -PT3C 80 200 3.0
ARC -PT3D 80 250 3.0
ARC -PT3E 80 300 3.0
ARC -PT3F 80 400 4.0
ARC -PT3G 80 500 4.0
ARC -PT3H 80 600 4.0
ARC -PT4A 110 100 4.0
ARC -PT4B 110 200 4.0
ARC -PT4C 110 300 4.0
ARC -PT4D 110 400 4.0ARC -PT4E 110 500 4.0
ARC -PT4A 110 600 4.0
H
T
W
GRP/FRP Cable Management Systems
7/31/2019 ARC FRP Catalogue
http://slidepdf.com/reader/full/arc-frp-catalogue 10/10
W (mm) A (mm)
50 565
75 565
100 565
150 565
200 565
250 568
90° Vertical Inside Bend
W (mm) A (mm)
50 559
75 559
100 559
150 559
200 559
250 559
90° Vertical Outside Bend
W1 (mm) W2 (mm)
51 51
76 76
102 102
152 152
203 203
255 255
Horizontal Cross
Cable TrayHold Down Clamp
Cable Tray FRP CoverHold Down Clip
W (mm) A (mm)
50 610
75 635
100 660
150 711
200 762250 813
90° Horizontal Bend
W1 (mm) W2 (mm)
51 51
76 76
102 102
152 152
203 203255 255
Horizontal Tee
A
W
R
22°-30°
22°-30°
45º
10’’
Mitered Fi t t ings for the Perforated Cable Tray
22°-30°
22°-30°
10”
AR
W
45°
10’’
A
R
W
22º-30º
22º-30º
45º
W 1
18’’ (+57)
1 8 ’ ’ ( + 5 7 )
W2
18’’ (+57)
1 8 ’ ’ ( + 5 7 )
W 1
W2
(8)
(13)
A
(38)
1 / 2’’
11 / 2’’
5 / 16’’
2’’ (51)1 / 4’’ Bolt
3 / 16’’ (5)
This catalogue is issued to p rovide outline information only and is not deemed to form part of an offer or contract. With the policy of continuous development,
ARCproTM reserves the right to change details without prior notice.
GRP/FRP Cable Management Systems