AquaStar VGB QuickRef 04-02-12

2012 Quick

Referen

ce Guide

The A

quaS

tar line o

f suctio

n outlet co

vers, complian

t with

the V

irginia

Graem

eBaker P

ool an

d Spa S

afety Act (A

NSI/A

PSP-16

2011 an

d NSF 5

0)

Inclu

des all fe

deRal u

pdate

s to

ansI/a

psp-16 2011 and nsf 5

0

VGB

2It has been a very interesting year when it comes to drains to say the least.

At AquaStar, we always strive to create the best and most useful products possible. We have always risen to the challenge and feel we have done so again.

The new change in the VGB law threw a lot of pool professionals for a loop. We at AquaStar felt no different. But we embraced the challenge and came up with solutions for every situation we could find.

This new 2012 VGB guide will help you find a solution for all your drain needs and hopefully make it easy to choose the right product.

We will continue to make Proudly Made In the USA mean something.

Everything has been completed and tested to the new federal standard and is available for shipment when you need it.

Thank you for all your support it is truly appreciated.

CREATIVITY HAS NO BOUNDARIES

Olaf Mjelde BFN President

[email protected] www.aquastarpoolproducts.com 3

VGB SerieS

Sump Bucket cONFiGurAtiONSA selection of our drain covers are available with the following additional sump bucket configurations. Letters AF at the end of the part number correspond to the desired configuration.

8AVWRxxx A = 8" Anti-Entrapment Suction Outlet with Double-Deep Sump

A Double-Deep Sump (See drain cover options on following pages) c 4" Spigot Deep PVC Sump(See drain cover options on following pages)

e 6" Spigot Deep PVC Sump(See drain cover options on following pages)

SBAc 8" Standard Sump with Adjustable Collar (See drain cover options on following pages)

B Dual-Port 2" Spigot x 2" Socket Deep PVC Sump (See drain cover options on following pages)

D 4" Socket Deep PVC Sump(See drain cover options on following pages)

SB 8" Standard Sump (See drain cover options on following pages)

F 6" Socket Deep PVC Sump(See drain cover options on following pages)

SBV 8" standard sump for vinyl/fiberglass(See drain cover options on following pages)

101STANDARD COLORS OPTIONAL COLORS102 103 105 108 104 106 107

877.768.2717 fax: 877.276.pool (7665) Outside the U.S.: +1.805.620.5060 fax: +1.949.336.19404

VGB SerieS

Also available in additional configurations, (see page 3)

Lp8AVWrxxxA includes Double-Deep SumpLp8AVWrxxxB includes Dual-Port 2" Spigot x 2" Socket Deep PVC Sump Lp8AVWrxxxc includes 4" Spigot Deep PVC Sump Lp8AVWrxxxD includes 4" Socket Deep PVC Sump Lp8AVWrxxxe includes 6" Spigot Deep PVC Sump Lp8AVWrxxxF includes 6" Socket Deep PVC Sump

LP8SBWRxxx includes 8" Round Standard Sump LP8SBACWRxxx includes 8" Round Standard Sump with Adjustable Collar

Fits AquaStar (all pre-VGB 8" models), American, Pentair, Color Match, Waterway and most Custom Molded (CMP)

8" Low-profile Anti-entrapment Suction Outlet cover, Vented riser ring and mud Frame

9-5/87-1/2

115/16

1. 8" vented riser ring2. 8" low profile anti-vortex cover3. #10 x 3/4" flat head phillips screw, 316 ss4. 8" round anti-entrapment frame5. #10 x 1-1/4" flat head phillips type-a screw, 316 ss

1

2

3

4

5


8AVWrxxxA includes Double-Deep Sump 8AVWrxxxB includes Dual-Port 2" Spigot x 2" Socket Deep PVC Sump 8AVWrxxxc includes 4" Spigot Deep PVC Sump8AVWrxxxD includes 4" Socket Deep PVC Sump 8AVWrxxxe includes 6" Spigot Deep PVC Sump8AVWrxxxF includes 6" Socket Deep PVC Sump

8SBWRxxx includes 8" Round Standard Sump 8SBACWRxxx includes 8" Round Standard Sump with Adjustable Collar Fits AquaStar (all pre-VGB 8" models), American, Pentair, Color Match, Waterway and most Custom Molded (CMP)

8" Anti-entrapment Suction Outlet cover, Vented riser ring and mud Frame

9-5/8

7-1/2

15/161-3/8

1. 8" vented riser ring2. 8" round anti-entrapment suction outlet cover3. #10 x 3/4" lg., flat head phillips type a, 316 ss4. 8" round anti-entrapment frame5. #10 x 1-1/4" flat head phillips type-a screw, 316 ss

1

2

3

4

5

Single 3" sump depth: Floor: 88 GPM at 2.0 fps Wall: 70 GPM at 1.6 fps

Floor/wall: 66.4 GPM at 1.5 fps

14.2 square inch opening

Additional sump versions also available

8" Round Vented Riser Ring also sold separately part # 8RRxxx

24 per case

part # 8AVWRxxx





8" Round Vented Riser Ring also sold separately part # 8RRxxx

24 per case

part # LP8AVWRxxx



VGB SerieS

Also available in additional configurations, (see page 3)A8rxxxA includes Double-Deep Sump A8rxxxB includes Dual-Port 2" Spigot x 2" Socket Deep PVC Sump A8rxxxc includes 4" Spigot Deep PVC SumpA8rxxxD includes 4" Socket Deep PVC Sump A8rxxxe includes 6" Spigot Deep PVC SumpA8rxxxF includes 6" Socket Deep PVC Sump

A8rSBxxx includes 8" Round Standard SumpA8rSBAcxxx includes 8" Round Standard Sump with Adjustable Collar

Fits AquaStar (all pre-VGB 8" models), American, Pentair, Color Match, Waterway and most Custom Molded (CMP)

Super High Flow 8" Anti-entrapment Suction Outlet cover, Solid riser ring and mud Frame

7/8

9-5/8

2

8

1

1. 8FRxxx frame, 8" round2. A8RRxxx riser ring, 8" round3. A8Rxxx super high flow 8" round anti-entrapment cover4. VGB 2008 color code swimming man5. 10x075-FPA #10 x 3/4" flat-head phillips type-a screw, 316 ss, qty 46. 10x125-FPA #10 x 1-1/4" flat-head phillips type-a screw, 316 ss, qty 2

6

2

3

5

4


Single Sumpless: Floor: 140 GPM at 2.8 fps Wall: 84 GPM at 1.7 fps

Floor/wall: 75 GPM at 1.5 fps



8" Round Solid Riser Ring also sold separately part # a8RRxxx

24 per case

part # A8Rxxx

8" For u Wade Anti-entrapment Suction Outlet cover and mud Frame

3

2

1

1 1/4" 2 3/16"

1. 8" round drain frame2. 8" suction outlet cover3. 10 x 3/4" flat head phillips type-a screw, 316 ss

8 1/16"

7 9/16"

5/16" Largest Opening

Single 3" sump depth Floor: 110 GPM @ 2.2 fps Wall: 106 GPM @ 2.1 fps




36 per case

part # 8FUWxxx


8FuWxxxA includes Double-Deep Sump 8FuWxxxB includes Dual-Port 2" Spigot x 2" Socket Deep PVC Sump 8FuWxxxc includes 4" Spigot Deep PVC Sump 8FuWxxxD includes 4" Socket Deep PVC Sump 8FuWxxxe includes 6" Spigot Deep PVC Sump 8FuWxxxF includes 6" Socket Deep PVC Sump

8FuWSBxxx includes 8" Standard Sump8FuWSBAcxxx includes 8" Standard Sump with Adjustable Collar 8FuWSBVxxx includes standard sump for vinyl/fiberglass

Fits AquaStar (all pre-VGB 8" models), American, Pentair, Color Match, Waterway and most Custom Molded (CMP) at least two mud frame screws must be used to secure cover



VGB SerieS


8HpxxxA includes Double-Deep Sump 8HpxxxB includes Dual-Port 2" Spigot x 2" Socket Deep PVC Sump 8Hpxxxc includes 4" Spigot Deep PVC Sump8HpxxxD includes 4" Socket Deep PVC Sump8Hpxxxe includes 6" Spigot Deep PVC Sump8HpxxxF includes 6" Socket Deep PVC Sump

8HPSBxxx includes 8" Standard Sump 8HPSBACxxx includes 8" Standard Sump with Adjustable Collar 8HpSBVxxx 8" Hockey Puck Sumpless Suction Outlet Cover and Standard Sump for Vinyl/Fiberglass

Fits AquaStar (all pre-VGB 8" models), American, Pentair, Color Match, Waterway and most Custom Molded (CMP) at least two mud frame screws must be used to secure cover

8" Hockey puck Sumpless Suction Outlet cover and mud Frame

Single Sumpless Floor/wall: 224 GPM at 6.3 fps




Also available with Retrofit Skimmer Equalizer Kit part # 8HpmHxxx

32 per case

part # 8HPxxx

1-5/8

15/16

7

2-7/8

7-1/2

6

1. 6" round suction outlet cover2. VGB 2008 color code swimming man3. #8-32 x 1.25" flat head phillips screw, 316 ss, qty 44. 8" round adapter plate5. 8" round frame6. #10 x 3/4" flat head phillips screw, 316 ss, qty 2

1

2 3

5

6

4

8" retrofit Hockey puck Sumpless Suction Outlet cover with Screw and Bushing kit

6-27/32

2-7/8

6

7-11/16

7-13/32

2

6

1. 6" round suction outlet cover2. VGB 2008 color code swimming man3. #8-32 x 1-1/4" flat head phillips screw, 316 ss, qty 44. 8" round retrofit adapter plate5. 8" round universal ring adapters, qty 26. #10 x 3/4" flat head phillips screw, 316 ss, qty 27. #10-24 x 1/2" flat head phillips screw, 316 ss, qty 2

1

2 3

5

6 7

4




32 per case

Fits Alloy Brass Foundry (ABF), Afras, Splash, Sta-Rite, Swimquip, Caretaker/Polaris, Advanced (APP), Hayward and certain Custom Molded (CMP), at least two mud frame screws must be used to secure cover

part # R8HPxxx


NEW

NEW


VGB SerieS


10AVWrxxxA includes Double-Deep Sump 10AVWrxxxB includes Dual-Port 2" Spigot x 2" Socket Deep PVC Sump 10AVWrxxxc includes 4" Spigot Deep PVC Sump 10AVWrxxxD includes 4" Socket Deep PVC Sump 10AVWrxxxe includes 6" Spigot Deep PVC Sump 10AVWrxxxF includes 6" Socket Deep PVC Sump

10" Round Vented Riser Ring also sold separately part # 10rrxxx

Also fits 10" Waterway and Color Match

10" Anti-entrapment Suction Outlet cover, Vented riser ring and mud Frame





8 per case

12

10

15/16 1-5/16

1. 10" vented riser ring2. 10" anti-entrapment suction outlet cover3. #10 x 3/4" flat head phillips type-a screw, 316 ss4. 10" round frame5. #10 x 1-1/4" flat head phillips type-a screw, 316 ss

1

2

3

4

5

part # 10AVWRxxx

10" round Star Anti-entrapment Suction Outlet cover, universal Adapter kit and mud Frame

Single Sumpless: Floor: 170 GPM at 1.7 fps Wall: 164 GPM at 1.7 fps

Floor/Wall: 147.3 GPM at 1.5 fps


For retrofit or new construction

Universal adapter frame retrofits all existing frames/sumps up to 10" round

12 per case

11-3/16"

5/16"LargestOpening

2

9

5

3

87

1

4

6

13

1112

10

14

1615

1- 15/16"

5/8"

1. 10" universal adapter frame2. 10" round suction outlet drain3. 10-32 x 5/8" lg. Flat head phillips, 316 ss4. Adjustable slide, long5. Adjustable slide, short6. 8" super low profile round frame7. 3/8" bushing8. 1/4" bushing

9. 1/4" concrete anchor10. 10-32 x 5/16" lg. pan head phillips, 316 ss11. #10 x 1" lg. pan head phillips, 316 ss12. 8-32 x 3/4" lg. pan head phillips, 316 ss13. 10-24 x 7/8" lg. pan head phillips, 316 ss14. #10 x 3/4" pan head phillips, 316 ss15. #8 x 1" lg. pan head phillips, 316 ss16. #8 x 3/4" lg. pan head phillips, 316 ss

part # A10RCFRxxx


NEW


VGB SerieS


10AVrxxxA includes Double-Deep Sump 10AVrxxxB includes Dual-Port 2" Spigot x 2" Socket Deep PVC Sump 10AVrxxxc includes 4" Spigot Deep PVC Sump 10AVrxxxD includes 4" Socket Deep PVC Sump 10AVrxxxe includes 6" Spigot Deep PVC Sump 10AVrxxxF includes 6" Socket Deep PVC Sump

10" Round Solid Riser Ring also sold separately part # 10AVrrxxx

Also fits 10" Waterway and Color Match

10" Anti-entrapment Suction Outlet cover, Solid riser ring and mud Frame





8 per case

1-3/8 7/8

11-1/8

10-1/4

1. 10" round frame2. Riser ring for 10" cover3. 10" anti-entrapment suction outlet cover4. #10 x 1-1/4" flat-head phillips type-a screw, 316 ss, qty 25. #10 x 3/4" flat-head phillips type-a screw, 316 ss, qty 2

1

2

3

4

5

part # 10AVRxxx

part # 10LTxxx

Single 3" sump depth

Floor only with Sun Lid: 60 GPM at 0.7 fps

Floor only without Sun Lid: 125 GPM at 1.4 fps



6 per case

10" round Debris catcher Anti-entrapment Suction Outlet cover and mud Frame


10LtxxxA includes Double-Deep Sump 10LtxxxB includes Dual-Port 2" Spigot x 2" Socket Deep PVC Sump10Ltxxxc includes 4" Spigot Deep PVC Sump10LtxxxD includes 4" Socket Deep PVC Sump 10Ltxxxe includes 6" Spigot Deep PVC Sump10LtxxxF includes 6" Socket Deep PVC Sump

1-9/16"

5

4

2

1

3

10-5/8"

1/2" 2-9/16"

1. 10" round drain frame2. 10" leaf trapper base3. 10" leaf trapper drain4. 10" leaf trapper cover5. 10 x 1-3/4" flat head phillips type-a screw, 316 ss


NEW


VGB SerieS

14" Square Anti-entrapment Suction Outlet cover and 9" Square retro-Adapter Frame



84 square inch opening

Retrofits to 9" square 1" deep frames or directly into pool finish using BIK4 kit

8 per case

Fits: Hayward, Waterway, American (Pentair #2 selling), PacFab with 1" existing frames and four screw hole pattern

Use part # 914xxx for new pools or retrofitting to " deep frames

13-9/16

13-9/16

8-1/4

8-1/4

9/32

1-7/32

5/16

8-13/16

1-13/321-3/42-13/16

1. 14" x 14" drain cover2. 9" to 14" universal frame converter3. 10-32 x 1" pan head phillips screw, ss4. #10 x 1" flat head phillips screw, ss5. 10-24 x 1-1/4" flat head phillips screw, ss6. #10 x 1-1/2" flat head phillips screw, ss

1

2

3

4 5

part # R914xxx


914xxxA includes Double-Deep Sump914xxxB includes Dual-Port 2" Spigot x 2" Socket Deep PVC Sump914xxxC includes 4" Spigot Deep PVC Sump914xxxD includes 4" Socket Deep PVC Sump914xxxE includes 6" Spigot Deep PVC Sump914xxxF includes 6" Socket Deep PVC Sump

Fits AquaStar (part # 9xxx, pre-VGB flat); Pentair (#1 selling) with " deep existing frames and four screw hole pattern

Use part # R914xxx for 1" deep frames (Hayward, Waterway, American Pre-fab, CMP)

14" Square Anti-entrapment Suction Outlet cover, mud Frame and 9" Square retro-Adapter Frame





Retrofits to 9" square " deep frames or directly into pool finish using BIK4 kit

8 per case

13-9/16

13-9/16

8-1/4

8-1/4

9/32

1-7/32

5/16

1-3/42-21/32 1-13/32

8-3/8

10-17/32

1

2

3

4

5

1. 14" x 14" drain cover2. 9" to 14" A.Q. conversion frame3. 9" x 9" flat square drain mud frame4. 10-32 x 1" pan head phillips screw, ss, qty 45. #10 x 1" flat head phillips screw, ss, qty 4

part # 914xxx



VGB SerieS


1216xxxA includes Double-Deep Sump1216xxxB includes Dual-Port 2" Spigot x 2" Socket Deep PVC Sump1216xxxC includes 4" Spigot Deep PVC Sump1216xxxD includes 4" Socket Deep PVC Sump1216xxxE includes 6" Spigot Deep PVC Sump1216xxxF includes 6" Socket Deep PVC Sump


Use part # r1216xxx for 1" deep frames (Hayward, Waterway, American Pre-fab, CMP)

16"Square Anti-entrapment Suction Outlet cover, mud Frame and 12" Square retro-Adapter Frame

16-11/32

16-11/32

1-3/4

2-21/32 1. 16" x 16" drain cover2. 12" to 16" a.q. conversion frame3. 12" x 12" flat square drain frame4. 10-32 x 1" pan head phillips screw, ss5. #10 x 1" flat head phillips screw, ss

1

2

4

5

3





Retrofits to 12" square " deep frames or directly into pool finish using BIK4 kit

8 per case

part # 1216xxx

16" Square Anti-entrapment Suction Outlet cover and 12" Square retro-Adapter Frame

16-11/32

16-11/32

1-3/4

2-13/161. 16" x 16" drain cover2. 12" to 16" universal frame converter3. 10-32 x 1" pan head phillips screw, ss4. #10 x 1" flat head phillips screw, ss5. 10-24 x 1-1/4" flat head phillips screw, ss6. #10 x 1-1/2" flat head phillips screw, ss

1

2

3

4

5

6



Retrofits to 12" square 1" deep frames or directly into pool finish using BIK4 kit

8 per case

Fits Hayward, Waterway, American (Pentair #2 selling), PacFab with 1" existing frames and four screw hole pattern

Use part # 1216xxx for new pools or retrofitting to " deep frames

part # R1216xxx



VGB SerieS


WAV12WRxxxA includes Double-Deep SumpWAV12WRxxxB includes Dual-Port 2" Spigot x 2" Socket Deep PVC SumpWAV12WRxxxC includes 4" Spigot Deep PVC SumpWAV12WRxxxD includes 4" Socket Deep PVC SumpWAV12WRxxxE includes 6" Spigot Deep PVC SumpWAV12WRxxxF includes 6" Socket Deep PVC Sump


12" Square Wave Anti-entrapment Suction Outlet cover, Vented riser ring and mud Frame

14

14

15/16 12

1. 12" vented riser ring2. 12" square "wave" suction outlet3. 12" square drain frame4. #10 x 1-1/4" flat head phillips type-a screw, 316 ss

1

2

3

4

Single 3" sump depth: Floor/Wall: 361 GPM at 1.3 fps


Retrofits to 12" square " deep frames

8 per case


12" Square Vented Riser Ring also sold separately part # 12RRxxx

part # WAV12WRxxx


WAV9WrxxxA includes Double-Deep Sump WAV9WrxxxB includes Dual-Port 2" Spigot x 2" Socket Deep PVC SumpWAV9Wrxxxc includes 4" Spigot Deep PVC SumpWAV9WrxxxD includes 4" Socket Deep PVC Sump WAV9Wrxxxe includes 6" Spigot Deep PVC SumpWAV9WrxxxF includes 6" Socket Deep PVC Sump


9" Square Wave Anti-entrapment Suction Outlet cover, Vented riser ring and mud Frame

11-1/16

11-1/16

15/16 11-7/8

1. 9" vented riser ring2. 9" square "wave" suction outlet cover3. 9" square drain frame4. #10 x 1-1/2" flat head phillips type-a screw, 316 ss

1

2

3

4

Single 3" sump depth: Floor/Wall: 224 GPM at 1.5 fps



8 per case


9" Square Vented Riser Ring also sold separately part # 9RRxxx

part # WAV9WRxxx



VGB SerieS

25-3/8

25-3/8

1-1/25/8

23-7/8

23-7/8

2-17/32

1

2

3

1. White 24" x 24" ss frame2. 12" x 12" square wave drain3. #10 flat head screw, ss, qty 16

24" Square mud Frame with Four 12" Square Wave Anti-entrapment Suction Outlet covers

Single 12" sump depth Floor/wall: 1444 GPM at 1.3 fps


part # WAV24xxx

18" Square mud Frame with Four 9" Square Wave Anti-entrapment Suction Outlet covers and Vented riser rings



6 per case

18" Square Vented Riser Ring also sold separately part # 18rrxxx

Grates fit AquaStar (part # 18xxx, pre-VGB flat); Pentair (#1 selling) with " deep existing window grid frame and 4x4 screw hole pattern

1-15/16

20-5/16

20-5/16

1. 18" square (4) 9"x9" frame, plastic2. 18" vented riser ring3. 9" x 9" wave square drain cover4. #10 x 1-1/2" flat head phillips type-a screw, 316 ss

1-7/8

1

2

3

4

part # WAV18WRxxx

Single, unblockable! No second suction outlet or backup SVRS required



VGB SerieS


SUN12WRxxxA includes Double-Deep Sump SUN12WRxxxB includes Dual-Port 2" Spigot x 2" Socket Deep PVC SumpSUN12WRxxxC includes 4" Spigot Deep PVC SumpSUN12WRxxxD includes 4" Socket Deep PVC Sump SUN12WRxxxE includes 6" Spigot Deep PVC SumpSUN12WRxxxF includes 6" Socket Deep PVC Sump


Fits AquaStar, AquaStar pre-VGB (" deep frames), Pentair #1

12" Square SuN Anti-entrapment Suction Outlet cover, Vented riser ring and mud Frame

Single 3" sump depth Floor/Wall: 232 GPM at 1.8 fps

Floor/Wall: 191.2 GPM at 1.5 fps




12 per case

14

14

15/16 11-1/2

1. 12" vented riser ring2. 12" shallow square "SUN" to 10" round adapter3. 10" anti-entrapment suction outlet cover4. #10 x 3/4" flat head phillips screw, 316 ss5. 12" square drain frame6. #10 x 1-1/2" flat head phillips type-a screw, 316 ss

1

2

3

4

5

6

part # sun12WRxxx


SUN9WRxxxA includes Double-Deep SumpSUN9WRxxxB includes Dual-Port 2" Spigot x 2" Socket Deep PVC SumpSUN9WRxxxC includes 4" Spigot Deep PVC SumpSUN9WRxxxD includes 4" Socket Deep PVC SumpSUN9WRxxxE includes 6" Spigot Deep PVC SumpSUN9WRxxxF includes 6" Socket Deep PVC Sump


Fits AquaStar, Pentair #1, AquaStar pre-VGB (" deep frames)

9" Square SuN Anti-entrapment Suction Outlet cover, Vented riser ring and mud Frame






8 per case

11-1/16

11-1/16

15/16 11-1/2

1. 9" vented riser ring2. 9" shallow square "SUN" to 8" round adapter3. 8" round anti-entrapment suction outlet cover4. #10 x 3/4" flat head phillips screw, 316 ss5. 9" square drain frame6. #10 x 1-1/2" flat head phillips type-a screw, 316 ss

1

2

3

4

5

6

part # SUN9WRxxx


NEW

NEW


VGB SerieS

Also available in additional configurations

rSuN18HpHxxx 4 SUN9/8HPH covers for " deep retrofitsrSuN18HpHrxxx 4 RSUN9/8HPH covers for 1" deep retrofits


18" Square mud Frame with Four 9" Square SuN/8HpH Anti-entrapment Suction Outlet covers

Single 6" sump depth Floor: 1000 GPM at 3.1 fps Wall: 644 GPM at 2.0 fps



4 per case

Retrofit version without frame also available (part #s below)

1-5/8

1-15/16

19-25/32

19-25/32

3/4

18-19/32

18-19/32

1. #8-32 x 1.25" flat head phillips screw, 316 ss, qty 162. #10 x 3/4" flat head phillips screw, 316 ss, qty 243. 18" (4) 9"x9" square frame4. 6" round suction outlet cover, qty 45. 8" round frame, qty 46. 9" shallow square sun to 8" round adapter, qty 47. VGB 2008 color code swimming man, qty 4

1

2

3

4

7

6

part # SUN18HPHxxx

18" Square mud Frame with Four 9" Square SuN/Star Suction Outlet covers and Vented riser rings



4 per case



part # SUNA18WRxxx

20-1/4

20-1/4

2

1-15/16

1. 18" square (4) 9"x9" frame, plastic2. 18" vented riser ring3. 9" shallow square "SUN" to 8" round adapter4. #10 x 1-1/2" flat head phillips type-a screw, 316 ss5. Super high flow 8" round anti-entrapment cover6. #10 x 3/4" flat head phillips screw, 316 ss7. VGB 2008 "color code" swimming man

1

2

3 4

5

6 7


NEW

NEW


VGB SerieS

9" Square Star Anti-entrapment Suction Outlet cover, Vented riser ring and mud Frame

4

3

2

11. 9" square drain frame2. 9" vented riser ring3. 9" suction outlet cover4. 10 x 1-3/4" flat head phillips type-a screw, 316 ss

11 1/16"

11 1/16" 8 7/8"

8 7/8"

5/16"LargestOpening

1" 2" 2 7/8"

12" Square Star Anti-entrapment Suction Outlet cover, Vented riser ring and mud Frame

14 1/16" 11 7/8"

14 1/16" 11 7/8"

5/16"LargestOpening

1" 2" 2 7/8"

4

3

2

1

1. 12" drain frame2. 12" vented riser ring3. 12" suction outlet cover4. 10 x 1-3/4" flat head phillips type-a screw, 316 ss




6 per case



part # P9xxx


p9xxxA includes Double-Deep Sump p9xxxB includes Dual-Port 2" Spigot x 2" Socket Deep PVC Sumpp9xxxc includes 4" Spigot Deep PVC Sumpp9xxxD includes 4" Socket Deep PVC Sump p9xxxe includes 6" Spigot Deep PVC Sumpp9xxxF includes 6" Socket Deep PVC Sump







6 per case

part # P12xxx


P12xxxA includes Double-Deep SumpP12xxxB includes Dual-Port 2" Spigot x 2" Socket Deep PVC SumpP12xxxC includes 4" Spigot Deep PVC SumpP12xxxD includes 4" Socket Deep PVC SumpP12xxxE includes 6" Spigot Deep PVC SumpP12xxxF includes 6" Socket Deep PVC Sump




NEW

NEW


VGB SerieS

4

3

2

1

20 1/4"

20 1/4" 5/16largestopening

2"

1" 3 7/8"

1. 18" drain frame2. Vented riser ring for 18" frame3. 9" suction outlet cover4. 10 x 1-3/4" flat head phillips type-a screw, 316 ss

18" Square mud Frame with Four 9" Square Star Suction Outlet covers and Vented riser rings




6 per case


part # P18xxx

24" Square mud Frame with Four 12" Square Star Anti-entrapment Suction Outlet covers

25 7/8"

25 7/8"

5/16"largestopening

1"

3 1/4"

2

3

1

1. 24" drain frame2. 12" suction outlet cover3. 10 x 5/8" flat head phillips type-a screw, 316 ss



1 per case

part # P24xxx



NEW

NEW


VGB SerieS

24" Square mud Frame with Four 12" Square Flat Grate Anti-entrapment Suction Outlet covers

1-1/2

5/8

1

2

3 25-3/8

25-3/8 23-7/8

23-7/8

1. White 24" x 24" ss frame2. 12" x 12" flat square drain cover3. #10 flat head screw, ss, qty 16



1 per case

part # 24xxx




32cDFLFrxxx 32" Channel Drain Flat Grate Suction Outlet Cover with Mud Frame32cDFLNFxxx 32" Channel Drain Flat Grate Suction Outlet Cover Only32cDSBxxx 32" Channel Drain Three-Port Manufactured Sump Only32cDFLVxxx 32" Channel Drain Flat Grate Anti-Entrapment Suction Outlet Cover and ThreePort Manufactured Sump for Vinyl/Fiberglass

32" channel Drain Flat Grate Anti-entrapment Suction Outlet cover and threeport manufactured Sump

Single Floor: 316 GPM at 3.9 fps Wall: 208 GPM at 2.6 fps



4 per case

Additional sump and frame versions also available

1. 32" three-port manufactured sump bucket2. 32" channel drain, cover, flat3. 2" NPT plug, qty 24. 32" channel drain, plaster shield5. #10 x 3/4" flat head phillips type-a screw, 316ss, qty 16

4-11/32

1010

2-1/2" spigot x 2" socket x 2" NPT

3 2 4 5

1

32-19/32

3-27/32

5/16

Notes: unless otherwise specified. Plaster shield and screws to be removed after installation.

part # 32CDFLxxx

Two drains in one!

Notes: unless otherwise specified, plaster shield and screws to be removed after installation.



VGB SerieS


32" channel Drain Flat Grate Anti-entrapment Suction Outlet cover and Frame




12 per case


part # 32CDFLFRxxx

Two drains in one!



32-13/16

4-1/16

1-1/43/8

5/16

1. 32" channel drain, no sump, frame2. 32" channel drain, cover, flat3. 32" channel drain, frame support dog bones, qty 44. #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 16

1

2

4

3

5/16

1/21/8

33-27/32

5-3/32

10 10

5-1/32

1. 32" three-port manufactured vinyl/fiberglass sump bucket2. 32" channel drain vinyl clamping gasket3. 32" channel drain vinyl clamping ring with gasket4. 32" channel drain, cover, flat5. 2" NPT plug, qty 26. #10 x 1" flat head phillips type-a screw, 316 ss, qty 307. #10 x 1-1/4" flat head phillips type-a screw, 316 ss, qty 8

1

2

3

5

4 6

7


32" channel Drain Flat Grate Suction Outlet cover and three-port manufactured Sump for Vinyl/Fiberglass




4 per case


part # 32CDFLVxxx

Two drains in one!




VGB SerieS


1. 32" three-port manufactured sump bucket2. 32" anti-entrapment suction outlet cover3. 32" channel drain, plaster shield4. 2" NPT plug, qty 25. #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 16

32-19/32

3-27/32

1010

5/16

5/16


1

3

2

5

4

4-11/32

Notes: unless otherwise specified. Plaster shield and screws to be removed after installation.

Two drains in one!


32cDAVFrxxx 32" Channel Drain Anti-Entrapment Suction Outlet Cover with Mud Frame32cDAVNFxxx 32" Channel Drain Anti-Entrapment Suction Outlet Cover Only32cDSBxxx 32" Channel Drain Three-Port Manufactured Sump Only32cDAVVxxx 32" Channel Drain Anti-Entrapment (Anti-Vortex) Suction Outlet Cover and ThreePort Manufactured Sump for Vinyl/Fiberglass

32" channel Drain Anti-entrapment Suction Outlet cover and threeport manufactured Sump





4 per case

part # 32CDAVxxx



32-13/16

4-1/16

1-1/45/16

5/16

1. 32" channel drain, no sump, frame2. 32" anti-entrapment suction outlet cover3. 32" channel drain, frame support dog bones, qty 44. #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 16

1

2

4

3

32" channel Drain Anti-entrapment Suction Outlet cover and Frame




12 per case


part # 32CDAVFRxxx

Two drains in one!




VGB SerieS


5/16

5/81/8

33-27/32

5-3/32

5-5/32

10 10

1. 32" three-port manufactured vinyl/fiberglass sump bucket2. 32" channel drain vinyl clamping gasket3. 32" channel drain vinyl clamping ring with gasket4. 32" anti-entrapment suction outlet cover5. 2" NPT plug, qty 26. #10 x 1" flat head phillips type-a screw, 316 ss, qty 307. #10 x 1-1/4" flat head phillips type-a screw, 316 ss, qty 8

1

2

3

4

5

6

7


32" channel Drain Anti-entrapment Suction Outlet cover and three-port manufactured Sump for Vinyl/Fiberglass




4 per case


part # 32CDAVVxxx

Two drains in one!




32cDLtFrxxx 32" Channel Drain Debris Catcher Suction Outlet Cover with mud frame32cDSBxxx 32" Channel Drain Three-Port Manufactured Sump Only32cDLtVxxx 32" Channel Drain Debris Catcher Anti-Entrapment Suction Outlet Cover and ThreePort Manufactured Sump for Vinyl/Fiberglass

32" channel Drain Debris catcher Suction Outlet with threeport manufactured Sump




4 per case


23/32

32-19/32

3-27/32

4-11/32

1010

1/2

1. 32" three-port manufactured sump bucket2. 32" leaf trap insert3. 32" leaf trap cover4. 2" NPT plug, qty 25. 32" channel drain, plaster shield6. #10 x 3/4" pan head phillips hi-lo screw, 316 ss, qty 87. #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 8

1

2

3

6

4 5 7


part # 32CDLTxxx

Two drains in one!




VGB SerieS


32-13/16

4-1/16

1/2 23/32

1-31/32

1. 32" channel drain, no sump, frame2. 32" leaf trap insert3. 32" leaf trap cover4. 32" channel drain, frame support dog bones, qty 45. #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 86. #10 x 3/4" pan head phillips hi-lo screw, 316 ss, qty 8

2

3

6

1

4

5

32" channel Drain Debris catcher Suction Outlet with Frame




4 per case


part # 32CDLTFRxxx

Two drains in one!



1/81/2

33-27/32

5-3/32

10 10

5-3/4

1-7/32

1. 32" three-port manufactured vinyl/fiberglass sump bucket2. 32" channel drain vinyl clamping gasket3. 32" channel drain vinyl clamping ring with gasket4. 32" leaf trap insert5. 32" leaf trap cover6. 2" NPT plug, qty 27. #10 x 1" flat head phillips type-a screw, 316 ss, qty 308. #10 x 3/4" pan head phillips hi-lo screw, 316 ss, qty 8

1

2

3

7

6

4

5

8


32" channel Drain Debris catcher Suction Outlet with three-port manufactured Sump for Vinyl/Fiberglass




4 per case


part # 32CDLTVxxx

Two drains in one!




VGB SerieS


32-9/16"

3-13/16"

10" 10"

4-3/8"4"

2-1/2" Spc. x 2" Soc x 2" NPT

2

5

3

1

4

1. 32" 3 port manufactured sump2. #10 x 3/4" flat head phillips type-a screw, 316 ss3. 32" channel drain, plaster shield4. 2" NPT plug5. 32" channel drain anti-entrapment suction outlet "pinhole" cover

NEW


32CDPHFRxxx 32" Channel Drain Pinhole Anti-Entrapment Suction Outlet Cover with Mud Frame32CDPHNFxxx 32" Channel Drain Pinhole Anti-Entrapment Suction Outlet Cover Only32CDSBxxx 32" Channel Drain Three-Port Manufactured Sump Only32CDPHVxxx 32" Channel Drain Pinhole Anti-Entrapment Suction Outlet Cover and Three-Port Manufactured Sump for Vinyl/Fiberglass

32" channel Drain pinhole Anti-entrapment Suction Outlet cover and three-port manufactured Sump


Floor: 268 GPM at 3.1 fps Wall: 172 GPM at 2.0 fps

Floor/Wall: 131 at 1.5 fps


4 per case

part # 32CDPHxxx

Two drains in one!


32" pinhole Anti-entrapment Suction Outlet cover and propeller manufactured Sump

3

2

1

5

4

9 8

76 35"

1-3/8"

1/8"largest opening

6-1/4" 10-3/4"

1. 32" propellor sump2. 32" channel drain anti-entrapment suction outlet "pinhole" cover3. #10 x 3/4" flat head phillips type-a screw, 316 ss4. #10 x 1" pan head phillips screw, 316 ss5. 1/4" concrete anchor

6. 3/8" bushing7. 1/4" bushing8. 8-32 x 3/4" lg. pan head phillips, 316 ss9. #10 x 1" lg. pan head phillips, 316 ss10. 10-24 x 7/8" pan head phillips, 316 ss11. #8 x 3/4" pan head phillips, 316 ss12. #8 x 1" pan head phillips, 316 ss




6 per master case

part # 32PDxxx


NEW Notes: Propeller Sump must be permanently affixed to pool floor using epoxy and provided anchorsNo additional sump required


VGB SerieS


32" channel Drain pinhole Anti-entrapment Suction Outlet cover with mud Frame





12 per case


part # 32CDPHFRxxx

Two drains in one!



32 13/16"

4 1/16"

1 1/4"

3/4"

41

2

3

1. 32" channel drain, no sump, frame 2. #10 x 3/4" flat head phillips type-a screw, 316 ss3. 32" channel drain, frame support "dog bones"4. 32" channel drain anti-entrapment suction outlet "pinhole" cover

NEW

33 7/8"

5 1/8"

10" 10"

5 1/16"

1/2"3/8"

2 1/2" SP. X 2" SOC. X 2" NPT

1. 32" channel drain anti-entrapment suction outlet "pinhole" cover2. 32" 3 port manufactured vinyl/fiberglass sump bucket3. 32" channel drain vinyl clamping gasket4. 2" npt plug5. #10 x 1-1/4" flat head phillips type-a screw, 316 ss6. 32" channel drain vinyl clamping ring w/ gasket7. #10 x 1" flat head phillips type-a screw, 316 ss

32" channel Drain pinhole Anti-entrapment Suction Outlet cover and three-port manufactured Sump for Vinyl/Fiberglass





4 per case


part # 32CDPHVxxx

Two drains in one!



NEW


VGB SerieS

4

3X 1-3/8

1-1/16

typ3/32

1. 4" suction outlet cover2. 8-32 x 1/2" lg flat head phillips screw, 316 ss, qty 33. VGB 2008 color code swimming man

1

2

3

FeaturesFor single or multiple drain use in gunite, steel, vinyl, fiberglass and tile pools and spas (see installation instructions)




Trademarked VGB compliance button easily identifies VGB 2008 compliant cover from on deck and underwater

#316 stainless steel screws, qty 3 for brass inserts

Manufactured from superior UV-resistant engineered polymers

All components meet or exceed ANSI/APSP-16 2011 and NSF 50 national standards and ASTM G154 UV testing exposure

Easily and safely retrofits many HydroAir/ITT parts

Listed with IAMPO R&T

See page 25 for six different adapter plates that are sold separately, available for sumpless connections to 1022s, 1.5" female adapters, 1.5" and 2" inside and outside slip and threads

25 per case

Part # 4Hpxxx

NEW Ideal for fiberglass and all sumpless configurations.

VGB 2008 Compliant

101

STANDARD COLORS

OPTIONAL COLORS

102

103

104

105

106

108

107

4" Round Hockey Puck Sumpless Suction Outlet Cover


VGB SerieS

1-1/8

5/8

1. 4" suction outlet cover2. #8 x 3/4" lg flat head phillips screw, 316 ss, qty 33. VGB 2008 color code swimming man4. 4" sumpless bulkhead, 1-1/2" mpt

1-1/2" mpt

1

4

2

3

Use with 1" FPT, does not fit 1022 female adapters

2" slip-inside

1-5/16

1-1/8

1, 4" suction outlet cover2. #8 x 1/2" lg flat head phillips screw, 316 ss3. 4" sumpless bulkhead, 2" slip-insider4. VGB 2008 "color code" swimming man

1

3

2

4

1-1/2" slip-inside

1-5/16

1-1/8

1. 4" suction outlet cover2. #8 x 1/2" lg flat head phillips screw, 316 ss3. VGB 2008 "color code" swimming man4. 4" sumpless bulkhead, 1 1/2" slip-insider

1 3

2

4

1-1/8

1-1/8

1-1/2" soc.

1. 4" suction outlet cover2. #8 x 3/4" lg flat head phillips screw, 316 ss, qty 33. VGB 2008 color code swimming man4. 4" sumpless bulkhead, 2" MPT x 1-1/2" soc.

2" mpt

1

4

2

3

11/3215/32

1-1/16

1. 4" suction outlet cover2. Retro 4" sumpless bulkhead, 1-1/2" MPT3. VGB 2008 color code swimming man4. #8 x 1/2" lg flat head phillips screw, 316 ss, qty 3

1-1/2" thread

1

2

3

4

1/227/32

1-1/16

1 1/2" straight pipe thd.

1

3

2

4

1. 4" suction outlet cover2. 8-32 x 1/2" lg flat head phillips screw, 316 ss3. VGB 2008 "color code" swimming man4. Retro 4" sumpless bulkhead, w/ extended 1-1/2" thd

Fits 1022 female adapters

ADDitiONAL prODuct cONFiGurAtiONS FOr 4Hpxxx (sold separately)

Features: Adapter Plates for 4HPxxxFor single or multiple drain use in gunite, steel, vinyl, fiberglass and tile pools and spas (see installation instructions)

Three brass inserts


Manufactured from superior UV-resistant engineered polymers/ABS

Seven combinations available for sumpless connections to 1022s, 1.5" female adapters, 1.5" and 2" inside and outside slip and threads; baseplates sold separately

25 per case

4 = for 4HPxxxxxx = color (i.e. 101 = white)

HP = hockey puck cover15 = 1"20 = 2"

25 = 2"Soc. = socket, slipSPG = spigot, slip

SI = Slip InsiderT = Thread

Code Key

retrofit 4" Bulkhead Adapter with 1" threaded Sumpless Fitting (sold separately)

retrofit 4" Bulkhead Adapter with 1" threaded Sumpless Fitting (sold separately)

4" Bulkhead Adapter with 2" threaded x 1" Socket Sumpless Fitting (sold separately)

4" Bulkhead Adapter with 1" threaded Sumpless Fitting (sold separately)

4" Bulkhead Adapter with 2" Slip-insider Sumpless Fitting (sold separately)

part # R415txxx

Also retrofits HydroAir #30-6906 and #30-6806

part # Re415txxx

Also retrofits HydroAir #30-6906 and #30-6806

Part # 420t15sxxx

Part # 415txxx

Part # 420sIxxx


Part # 415sIxxx


VGB SerieS

26 877.768.2717 fax: 877.276.pool (7665) Outside the U.S.: +1.805.620.5060 fax: +1.949.336.1940

FeaturesFor single or multiple drain use in gunite, steel, vinyl, fiberglass and tile pools and spas (see installation instructions)

Single Sumpless

Floor/wall (2" Pipe): 224 GPM at 6.3 fps

Floor (1" Pipe): 177 GPM at 5.9 fps

Wall (1" Pipe): 122 GPM at 3.4 fps


Hydro-Air retrofit version also available p/n 6HPHAxxx

Trademarked VGB compliance button easily identifies VGB 2008 compliant cover from on deck and underwater

#316 stainless steel screws

Manufactured from superior UV-resistant engineered polymers


Listed with IAMPO R&T

See page 27 for eight different adapter plates that are sold separately, available for sumpless connections to 1022s, 1.5" female adapters, 1.5" and 2" inside and outside slip and threads as well as existing HydroAir wall fittings #10-6015S and 10-6304S (both with brass inserts)

25 per case

Part # 6Hpxxx, 6HPHAxxx

NEW Ideal for fiberglass and all sumpless configurations.

101

STANDARD COLORS

OPTIONAL COLORS

102

103

104

105

106

108

107

6" Round Hockey Puck Sumpless Suction Outlet Cover, HydroAir/ITT Replacement

Retrofits to StaRite/Pentair #8011 and AquaStar #4RNDxxx equalizer

VGB 2008 Compliant

6

1/4

2-7/8

2-7/8

3/32TYP

1. 6" round suction outlet cover2. VGB 2008 color code swimming man3. #8-32 x 1.25" flat head phillips screw, 316 ss, qty 4

3

1

2


VGB SerieS

3

2" soc.

1-1/2

.154 min. wall

1-1/4

2

1

4

5 3

6

1. 6" suction outlet cover, hydroair replacement2. 2" socket sumpless fitting3. VGB 2008 "color code" swimming man4. Spacer blocks, 6" round suction outlet5. #8 x 2.5" flat headphillips screw, 316 ss6. 2" soc. X 1 1/2" soc.pipe reducer

ADDitiONAL prODuct cONFiGurAtiONS FOr 6Hpxxx (sold separately)

Code Key 6 = for 6HPxxxHP = hockey puck

xxx = color(i.e. 101 = white)

15 = 1", 20 = 2"25 = 2"

Soc. = socket, slipSpg. = spigot, slip

SI = Slip InsiderT = Thread



6" Bulkhead Adapter with 2" Socket Sumpless Fitting (sold separately)



6" Bulkhead Adapter with 2" thread and 2" Socket for Fiberglass/ Steel, with Gasket and 2" Locking Nut (sold separately)

part # 625t20sxxx

part # 620sIxxx

part # Rndxxx

part # 620t15sxxx

part # # 615sIxxx

part # # 6Ha25t20sxxx (to be used with part # 6HPHAxxx)

1-31/321-5/16

2" soc.

1-9/16

1. 6" round suction outlet cover2. VGB 2008 "color code" swimming man3. 6" sumpless bulkhead w/ 2 1/2" mpt & 2" soc.4. #8-32 x 1.25" flat head phillips screw, 316 ss

1

3

4

2

2 1/2" straightpipe thd.

1-5/8

2" slip-insider

1-9/16

1. 6" round suction outlet cover2. VGB 2008 "color code" swimming man3. #8-32 x 1.25" flat head phillips screw, 316 ss4. 6" sumpless bulkhead w/ 2" slip-insider

3

1

2

4

1. 6" suction outlet cover2. VGB 2008 color code swimming man3. 6" sumpless bulkhead w/ 2" thread and 1-1/2" soc.4. #8-32 x 1.25" flat head phillips screw, qty 4

4

1

2

3

1-9/16

1-1/8

1-1/2" socket2" pipe thread

1-5/16

1-1/2" slip-inside

1-9/16

1. 6" round suction outlet cover2. VGB 2008 "color code" swimming man3. #8-32 x 1.25" flat head phillips screw, 316 ss4. 6" bulkhead w/ 1-1/2" slip-inside

3

1

2

4

1-5/16

1-1/2" slip-inside

1-9/16

1. 6" round suction outlet cover2. VGB 2008 "color code" swimming man3. #8-32 x 1.25" flat head phillips screw, 316 ss4. 6" bulkhead w/ 1-1/2" slip-inside

3

1

2

4

Also available as 1" slip Insider p/n 615SIxxx

6" Bulkhead Adapter with 1" threaded Sumpless Fitting (sold separately)

6" Bulkhead Adapter with extended 1" threaded Sumpless Fitting (sold separately)

part # # 615txxx

part # 6e15txxx

3/45/16

1-23/32

5/32wall

1. 6" round suction outlet cover2. VGB 2008 "color code" swimming man3. #8-32 x 1.25" flat head phillips screw, 316 ss4. 6" sumpless bulkhead w/ 1 1/2" nps

3

1

2

4

1 1/2" nps

5/161

1-23/32

5/32wall

1. 6" round suction outlet cover2. VGB 2008 "color code" swimming man3. #8-32 x 1.25" flat head phillips screw, 316 ss4. 6" sumpless bulkhead w/ extended 1 1/2" nps

3

1

2

4

1 1/2"nps

Fits 1022 female adapters

Use with flush mount 1" FPT, does not fit 1022 female adapters


VGB SerieS

10" Gunite Sump Basket

Gunite basket creates field-fabricated sump at required safe depth

Install basket over pipe before gunite and plaster; basket stays in place after gunite and plaster

Fits all AquaStar 10" suction outlet covers/frames

Universal with most other manufacturers 10" covers/frames

10" gunite basket fits pipe sizes 3" to 4" (can adapt up to 6").

Manufactured from superior engineered polymers

12 per case

part # 10GBDP101

8" Gunite Sump Basket

Gunite basket creates field-fabricated sump at required safe depth

Install basket over pipe before gunite and plaster; basket stays in place after gunite and plaster

Fits all AquaStar 8" suction outlet covers/frames

Universal with most other manufacturers 8" covers/frames

8" gunite basket fits pipe sizes 2", 2.5" and 3".

Manufactured from superior engineered polymers

12 per case

part # 8GBDP101


fits 3" - 4" pipes11-27/326-5/8

7-7/16

section A-A

6-7/32

9-21/32fits 2" 2-1/2" pipes

4-27/32

section A-A


VGB SerieS

4"S x 4"S x 2"S x 2"S Horizontal t with two 4" x 3" reducer Bushings

NSF-approved materials

Universal fit for AquaStar skimmer bottom and B two-port PVC sumps

Converts two 2 " spigot to 4" or 3" T

Comes complete with two 4" x 3" reducer bushings p/n BU101-4x3

Schedule 40 white PVC

12 per case

part # BFB101


NEW

Notes

4-17/32" 3-17/32"

3-7/16" 5-3/16"

w/o 3" adapter

1

2

3-1/8"

2-7/8" 1. 2.5" socket to 4" socket adapter bushing, qty 22. 4" spc. to 3" socket adapter


Notes


iNStALLAtiON iNStructiONS

termS AND cONDitiONS

General:All sales made by AquaStar Pool Products, Inc. (AquaStar) are subject to these terms and conditions, unless otherwise agreed to in writing by a duly authorized officer of AquaStar. In all cases of conflict between these terms and conditions and the requirements of any purchase order, these terms and conditions shall prevail.

Product Disclaimer:All illustrations, photographs and specifications in this publication are based on product information available at the time of printing. AquaStar reserves the right to make changes at any time without giving prior notice to colors, materials, specifications, part numbers and prices and to discontinue product or product components.

Pricing:Prices, discounts, quotations and specifications are subject to change without notice and will be applied as in effect at time of shipment. If prices have increased, AquaStar will notify buyer prior to shipment. All prices are in U.S. dollars. Any sales, excise or similar tax for which AquaStar may be liable on any sale will be charged to and paid by the buyer. If buyer is a reseller, buyer is responsible for furnishing a resale certificate prior to purchase.

Minimum Order:All orders must be a minimum of $50.00 (not including freight charges).

Ordering:Email order to [email protected] or fax to 877.276.POOL (7665) or. To ensure prompt and proper shipment please order by item #, color and product description. Be sure to include the correct item # (last two digits) for the color desired (i.e. 00=clear, 01=white, etc.).

Freight:All shipments are FOB AquaStar warehouse. Routing is subject to AquaStars discretion. Free freight is offered for orders of $5,000 or more for shipment to the contiguous United States only.

Billing:Unless payment is made by credit card, all new customer accounts are required to complete an AquaStar credit application and receive credit approval prior to shipment. Please pay by invoice per the terms on the sales invoice. This invoice is binding on the parties and their respective directors, officers, employees, agents, subcontractors, successors and permitted assigns. Contact AquaStar Accounting Department within 15 days of receipt if there are questions regarding the invoice or if you think the account is in error. There will be a $20.00 minimum service charge on all NSF or returned checks. If the invoice is not paid within the invoice terms, AquaStar may recover a service charge of 1% per month (18% annual percentage rate) on the past due amount and any expenses and/or attorneys fees incurred in connection with attempts to collect the outstanding balance.

Claims:All shipments must be inspected for freight damage, concealed or otherwise, at time of receipt. Any damage or product shortage must be both noted on the freight bill and reported to AquaStar Accounting Department within 10 days of receipt. AquaStar is committed to assist with all shortage and damage claims.

Returns/Credits:All returns must be authorized and accompanied by a Return Materials Authorization (RMA) number issued by AquaStar, which should be marked clearly on all returned cartons. Unauthorized returns will not be accepted. AquaStar will not accept returned merchandise after 90 days of shipment and/or not in original saleable condition. Saleable returns will be subject to a 45% restocking fee plus return freight charges. All credits for returns or other promotions are to be used towards purchases and will not be given cash refunds.

Limited Warranty:AquaStar is committed to and takes pride in the quality products that it manufactures. Accordingly, AquaStar maintains high standards for the materials and workmanship that it invests in its products. AquaStar warrants its products to be free from defects in material and workmanship for a period of three years from the date of original installation. This limited warranty will be applicable only if the product manufactured by AquaStar is the sole and exclusive cause of a defect. Products that fail or become defective during the warranty period, except as a result of color-fading, improper installation, bad water chemistry, accidents or negligence on behalf of the owner, freezing, earthquakes, fire, floods or other acts of nature, shall be repaired or replaced at AquaStars option.

Not all products available in all colors. Please contact your AquaStar sales representative for details.

To remain VGB 2008 compliant, AquaStar Pool Products requires that the installer follows our INSTALLATION INSTRUCTIONS completely. These instructions are included with every suction outlet cover and can also be found on our website at www.aquastarpoolproducts.com by clicking on News and Information under the Product Info section.

[email protected] 877.768.2717 fax: 877.276.pool (7665) Outside the U.S.: +1.805.620.5060 fax: +1.949.336.1940

aquastarpoolproducts.com

Printed in the U.S. 2012 AquaStar Pool Products 04/12

Documents

AquaStar VGB QuickRef 04-02-12