ApplicationXtender 7.0 SP1 - esktop lient Installation ...knowledgebase.mcgill.ca/media/pdf/myMcGill-Minerva/AX/AX7-Deskto… · Installation Instructions. Contents . Target Audience:

IT Services – 29 March 2016 1

ApplicationXtender 7.0 SP1 - Desktop Client Installation Instructions

Contents Target Audience: ........................................................................................................................................... 1

Step 1: Uninstall the AX 6.5 Suite ................................................................................................................. 2

Uninstall ApplicationXtender Desktop and Image Capture ...................................................................... 2

Uninstall Banner INB-AX Bridge ................................................................................................................ 4

Disable the old xscm.config file: ............................................................................................................... 4

Step 2: Verify that Microsoft .NET Framework 4.0 or higher is installed on your machine ......................... 5

Step 3: Install - AX Desktop suite 7.0 ............................................................................................................ 5

Step 4: Upgrade ApplicationXtender Desktop to 7.0 SP1 ............................................................................. 7

Step 5: Install ApplicationXtender Desktop to 7.0 SP1 patch (v7.0.1058) .................................................... 7

Step 6: Install INB-AX Bridge ......................................................................................................................... 7

Step 7: Install - AX Image Capture ................................................................................................................ 7

Step 8: Install – ODAC (Oracle Data Access Components) ............................................................................ 8

Step 9: Copy new xscm.config file ................................................................................................................ 9

Step 10: Workstation settings ....................................................................................................................... 9

Target Audience:

These instructions are written for System Administrators or Technical Support personnel. If you feel

comfortable performing these installations on your own, and you have Administrative permissions for

your computer, you may follow the instructions to install ApplicationXtender on your McGill work

computer.

If your unit has a Service Level Agreememt with IT Customer Services, send a request to the IT Service

Desk ([email protected]) to upgrade/install ApplicationXtender.

For units not supported by ICS, contact your local IT System Administrator, or, if you have administrative

rights on your computer, follow the steps below to install AX 7.0 SP1.

mailto:[email protected]


Step 1: Uninstall the AX 6.5 Suite Skip this step if this is a new installation. The suite is comprised of two applications which must be

removed separately: AX Desktop and Image Capture and Banner INB-AX Bridge.

Uninstall ApplicationXtender Desktop and Image Capture 1. Go to Control Panel > All Control Panel Items > Programs and Features 2. Right-click ApplicationXtender Desktop 6.5 (publisher EMC) and click Change.

3. The InstallShield Wizard opens; click Next to continue.


4. Choose Remove ApplicationXtender Desktop 6.5 from your computer. Then click Next, and proceed to Remove the application.

5. You may be prompted to Allow IntallShield to make changes to your computer.

6. Click Finish to complete the removal. ApplicationXtender Desktop 6.5 should no longer appear in the Programs and Features list.


Uninstall Banner INB-AX Bridge 1. Go to Control Panel > All Control Panel Items > Programs and Features 2. Right-click Banner Document Management Suite INB-AX Bridge Module, (publisher,

SunGard), and select Uninstall.

3. When removal is complete, the application no longer appears in the Programs and Features list.

Disable the old xscm.config file: Rename this file: C:\ProgramData\XSCM.CONFIG

To new name: C:\ProgramData\XSCM.CONFIG.OLD

NOTE: In order to see the folder, you will need to type C:\ProgramData into the address bar of the Windows Explorer; ProgramData is not visible otherwise.


Step 2: Verify that Microsoft .NET Framework 4.0 or higher is installed

on your machine 1. Go to Control Panel > All Control Panel Items > Programs and Features 2. You should see Microsoft .NET Framework 4.x in the list of applications. If it is not there,

contact your system administrator before continuing.

Step 3: Install - AX Desktop suite 7.0 1. Log into the workstation with Administrator privileges and map a drive to

\\Campus\Deptshare\BanVol1\Apps\AX7.0Setup to access installation packages. 2. In \AX7.0Setup\AppXtender Desktop go to the folder named x64 for 64-bit OS or x86 for

32-bit OS. 3. Right-click on the file setup.exe and select Run as administrator. The Installshield wizard

starts. 4. Click Next on the first screen, and Accept the license agreement. 5. Click Next until you get to the screen where you can select Setup Type: Custom.


6. Custom setup:

a) Click the X next to Document Manager and select This feature, and all sub features,

will be installed on local hard drive.

b) Click the X next to Scanner Support and select This feature, and all sub features, will

be installed on local hard drive.


c) Keep all other component unselected (leave the Xs).

7. Click Next and click Install.

8. Respond to the remaining prompts from the wizard to complete the installation.

Step 4: Upgrade ApplicationXtender Desktop to 7.0 SP1 ApplicationXtender 7.0.260 must be installed before you apply this upgrade.

1. Go to the folder \AX7.0Setup\AppXtender Desktop SP1 and the sub-folder named x64 for 64-bit OS or x86 for 32-bit OS.

2. Right-click on the ApplicationXtender Desktop.exe file and select Run as administrator. 3. Click Update on the Welcome to the Patch for ApplicationXtender Desktop 7.0 window. 4. When the upgrade is complete, click Finish on the Installation Complete window.

Step 5: Install ApplicationXtender Desktop to 7.0 SP1 patch (v7.0.1058) ApplicationXtender Desktop 7.0 SP1 (7.0.1055) must be installed before you apply this patch.

1. Go to the folder \AX7.0Setup\ AppXtender Desktop SP1 patch and the sub-folder named x64 for 64-bit OS or x86 for 32-bit OS.

2. Right-click on the ApplicationXtender Desktop.exe file and select Run as administrator. 3. Start all ApplicationXtender Windows services.

Step 6: Install INB-AX Bridge 1. Go to the folder \AX7.0Setup\ INB-AX Bridge and the sub-folder named x64 for 64-bit

OS or x86 for 32-bit OS. 2. Right-click on the file INBAXBridgeSetup.exe and select Run as administrator. 3. Respond to the prompts from the INB-AX Bridge Module Setup Wizard.

Step 7: Install - AX Image Capture 1. Open the \AX7.0Setup\AppXtender Image Capture folder. 2. Right-click setup.exe and select Run as administrator. 3. If prompted to allow the program to make changes to your computer, click Yes. 4. Click Next, and Accept the license agreement on the License Agreement page. 5. Click Next, and enter your user name and organization on the Customer Information

page. Click Next again. 6. Click Install on the Ready to install page. 7. When the installation is complete, click Finish on the Installation Complete window.


Step 8: Install – ODAC (Oracle Data Access Components) NOTE: You may will need the assistance of a system administrator for this part; it requires the use of the

Windows Command prompt window.

To open the Command Prompt window as administrator, click Start Menu; type “cmd” in the search

box; right-click on the cmd.exe file (as shown below), and select “Run as administrator”.

ODAC Installation for both x86 (32-bit) and x64 OS:

1. Open Command prompt (“as Administrator”) and then change to <mapped_drive>

\ Oracle Data Access Components\x86 (this folder for both 64-bit and 32-bit OS)

2. Type the following and then press ENTER: install.bat oledb C:\ODAC32 odac32

3. Type the following and then press ENTER: install.bat odp.net4 C:\ODAC32 odac32

Additional installation for x64 OS only:

1. Open Command Prompt (“as Administrator”) and then change to <mapped_drive>\

Oracle Data Access Components\x64

2. Type the following and then press ENTER: install.bat oledb C:\ODAC64 odac64

3. Type the following and then press ENTER: install.bat odp.net4 C:\ODAC64 odac64


Ensure that the following is added to the system path:

- For x86 : C:\ODAC32;C:\ODAC32\bin

- For x64 : C:\ODAC64;C:\ODAC64\bin;C:\ODAC32;C:\ODAC32\bin

Ensure that system variable for TNS_Admin exists and is set to -

\\campus\deptshare\banvol1\bannerforms\netadmin

Step 9: Copy new xscm.config file 1. Open the \AX7.0Setup\XSCM-Config folder.

2. If the user is an AX “power user” (i.e.,they will need to switch between Production and QA)

copy all contents of this folder into C:\ProgramData

Otherwise, for non-power users, just copy the file xscm.config to the folder C:\ProgramData.

Step 10: Workstation settings Make sure that 044-ISR AX-Accounts (AX service accounts) are allowed to logon locally:

1. Go to Start > Administrative Tools > Local Security Policy


2. Go to Local Policies > User Rights Assignment > Allow log on locally; click Add User or Group

and enter 044-ISR AX-Accounts if it isn’t there; click OK to add it.


3. Go to Local Policies > User Rights Assignment > Impersonate a client after authentication, and

click Add User or Group…


4. Enter your McGill Username ([email protected]) or an Active Directory group to which you

belong in the textbox and click OK.

mailto:[email protected]

Documents

ApplicationXtender 7.0 SP1 - esktop lient Installation ...knowledgebase.mcgill.ca/media/pdf/myMcGill-Minerva/AX/AX7-Deskto… · Installation Instructions. Contents . Target Audience: