For Technical Support and Sales Enquiries, please contact Studco
Building Systems 800.675.8023
1700 BOULTER INDUSTRIAL PARKWAY WEBSTER NY 14580 | PH:
800.675.8023 | [email protected] | www.resilmount.com
Another Quality Building Product
DS
R_A
237_
0910
2015
FEATURES• Simple design makes it adaptable to several
applications.
• Consistent and reliable quality – manufactured under ISO
9001quality control system.
• Decouples gypsum board from framing or structure to stop
flowof STC and IIC vibrations.
• A237 clips can be used to suit 7/8” and 1 1/2” furring
channels.
• A237 are provided with a 1/4” hole for a variety of
fasteners.
• UL approved in 38 wall and ceiling assemblies.
APPLICATIONResilmount A237™ are a direct mounting bracket for
Studco furring channels, for reducing airborne vibrationand
structure-borne vibration in wall and ceiling applications.
RELATED PRODUCTS
A96R Resilmount Sound Isolation Clip w/bracket.A237R Resilmount
Isolation Clip.A48R Resilmount Right angle bracket.A24R Double
Resilmount bracket.
Information contained within this document supersedes all
previous versions and is subject to change without notice.
Dat
ash
ee
tResilmount A237Direct Fix Furring Channel Mount
PRODUCT CODE: A237PUBLICATION DATE: October 2015
1/2
2 3/8”
3 1/16”
11/16”
Dat
ash
ee
tPRODUCT CODE: A237PUBLICATION DATE: October 2015
Resilmount A237
For Technical Support and Sales Enquiries, please contact Studco
Building Systems 800.675.8023
1700 BOULTER INDUSTRIAL PARKWAY WEBSTER NY 14580 | PH:
800.675.8023 | [email protected] | www.resilmount.com
DS
R_A
237_
0910
2015
2/2
ACCREDITATION/CERTIFICATION
Technical Drawing
Accreditation
Photo
Related products
Dynamic Characteristics
Installation Notes
Features
Warranty
Further Assistance
Ordering Information
Description
Application
??
??
??
# Lead time and minimum quantities may apply.
FURTHER ASSISTANCEContact the technical engineering team at
Studco Technical Services for assistance with specifications,
product selection, acoustic engineering and structural engineering
enquiries.Tel: 800.675.8023 or email [email protected]
WARRANTYThis product is covered by a year guarantee. Conditions
and limitations of guarantees and warranties are set out in Studco
Project Guarantee certificate.
SPECIFICATIONS
Code BracketHeight A237 11/16”
INSTALLATION NOTES
• A237 to be fastened to structure with a minimum #8 screwor
masonry sleeve anchors.(See fasteners manufacturers
specifications).
• Load capacity: 55 lbs. maximum dead load.
• Maximum spacing of clips on furring channel is 48”.
• Spacing between furring channels should not exceed 24”.
