2
ABG Systems offers the market a series of antennas operating at 13.56 MHz HF and UHF 865MHz-868MHz (UHF ETSI) and 902MHz-928MHz (UHF FCC) frequencies, designed to adapt to different operational environments and to different process requirements. The LTA3030 antenna is compact in size, equipped with a RFID HF built-in reader, which allows for a limited reading range (less than 25 cm). It is particularly suited to read a limited number of garments and it is frequently used to support the retirement home residents' personal garment sorting or regrouping process, where individually handled garments need to be quickly read. The LTA5050 antenna is 50X50 cm equipped with and external RFID HF or UHF reader that can be sized according to the required specifications. It is normally supplied with a Mid Range module, guarantees a maximum reading distance of about 40 cm with LT14/BT14 ABG tags, and is particularly suited to simultaneously read all the garments found in parcels. The LDR antenna is shielded and provided with a support structure with RFID HF or UHF reader, capable of reading garments particularly close together and without the risk of erroneous readings due to the presence of other tags near the antenna itself. Both antennas are protected by a washable plastic case. Both the LDR and LTA5050 antennas, in the HF version, can be supplied with automatic impedance calibration systems. Different in terms of performance, each antenna uses the same communications protocol to simplify hardware integration in the various business software applications HF/UHF RFID READING ANTENNAS ANTENNAS

ANTENNAS - abg.systems · ABG Systems offers the market a series of antennas operating at 13.56 MHz HF and UHF 865MHz-868MHz (UHF ETSI) and 902MHz-928MHz (U HF FCC) frequencies, designed

Embed Size (px)

Citation preview

ABG Systems offers the market a series of antennas operating at 13.56 MHz HF andUHF 865MHz-868MHz (UHF ETSI) and 902MHz-928MHz (UHF FCC) frequencies, designed toadapt to different operational environments and to different process requirements.

The LTA3030 antenna is compact in size, equipped with a RFID HF built-in reader, whichallows for a limited reading range (less than 25 cm). It is particularly suited to read a limitednumber of garments and it is frequently used to support the retirement home residents'personal garment sorting or regrouping process, where individually handled garments needto be quickly read.

The LTA5050 antenna is 50X50 cm equipped with and external RFID HF or UHF reader thatcan be sized according to the required specifications. It is normally supplied with a MidRange module, guarantees a maximum reading distance of about 40 cm with LT14/BT14 ABGtags, and is particularly suited to simultaneously read all the garments found in parcels.

The LDR antenna is shielded and provided with a support structure with RFID HF or UHFreader, capable of reading garments particularly close together and without the risk oferroneous readings due to the presence of other tags near the antenna itself.

Both antennas are protected by a washable plastic case.

Both the LDR and LTA5050 antennas, in the HF version, can be supplied with automaticimpedance calibration systems.Different in terms of performance, each antenna uses the same communications protocol to

simplify hardware integration in the various business software applications

HF/UHF RFID READING ANTENNAS

ANTENNAS

Technical specificationsLTA 5050Power supply: 230 V Mono-phaseDimensions (WxDxH mm): 550 x550 x65 mmStructure protection class: IP54Connectivity: RS232, RS485, EthernetOperating frequency: 13,56 MHz (HF)

865 MHz/868 MHz (UHF ETSI)902 MHz/928 MHz (UHF FCC)

Impedance: 50 OhmOperating temperature: -20 + 50 °CCable: Co-axial cable RG58 SMA-plugStructural material: Plastic

LTA 3030Power supply: 230 V Mono-phaseDimensions (WxDxH mm): 450x360x30mmStructure protection class: IP54Connectivity: RS232, RS485, EthernetOperating frequency: 13,56 MHz (HF)

865 MHz/868 MHz (UHF ETSI)Impedance: 50 OhmOperating temperature: -20 + 50 °CCable: Co-axial cable RG58 SMA-plugStructural material: Plastic

LDRPower supply: 230 V Mono-phaseDimensions (WxDxH mm): HF model 964 x704 x1014mm

UHF model 600X400X1300mmStructure protection class: IP54Connectivity: RS232, RS485, Ethernet, USBOperating frequency: 13,56 MHz (HF)

865 MHz/868 MHz (UHF ETSI)902 MHz/928 MHz (UHF FCC)

Structural material: Painted steel

ContactsABG Systems SrlVia Milano, 7 - 20084 Lacchiarella (MI) - ItalyT +39 02905798

ABG Systems GmbHElisabethstraße 2 - 50226 Frechen - GermanyTel +49/2234/91135-0

HF/UHF RFID READING ANTENNAS

ANTENNAS

Options• OP010- Industrial Pc Touch Screen

Windows 7 emb BUILT IN (only for LDRHF)

• OP021- Automatic system for antennatuning (only for LTA5050)