Upload
others
View
15
Download
1
Embed Size (px)
Citation preview
WELDING NECK 150#
+52(81)1646-9090 (main) www.dlineproducts.com
½¾1
1¼1½2
2½3
3½4568
10121416182022
24
3.503.884.254.635.006.007.007.508.509.00
10.0011.0013.5016.0019.0021.0023.5025.0027.5029.5032.00
0.440.500.560.630.690.750.880.940.940.940.941.001.131.191.251.381.441.561.691.811.88
ANSI B16.5 CLASS 150 WELDING NECK FLANGES
Nominal Pipe Size
*All dimensions are in inches. These flanges will be furnished with a 1/16" raised face unless otherwise specified.Flat face option available.Standard Bore will be furnished unless otherwise specified.
Outside Diameter (O)
Thickness (T)
Raised Face Diameter (R)
Point of Weld (A)
Hub Diameter (X)
Bore (B)
Numberof Holes
Diameterof Holes
BoltCircle (C)
Approximate Weight (lbs)
1.381.692.002.502.883.634.135.005.506.197.138.50
10.6312.7515.0016.2518.5021.0023.0025.2527.25
0.841.051.321.661.902.382.883.504.004.505.566.638.63
10.7512.7514.0016.0018.0020.0022.0024.00
1.191.501.942.312.563.063.564.254.815.316.447.569.69
12.0014.3815.7518.0019.8822.0024.2526.13
0.620.821.051.381.612.072.473.073.554.035.056.077.98
10.0212.0013.2515.2517.2519.2521.2523.25
4444444488888
1212121616202020
0.630.630.630.630.630.750.750.750.750.750.880.880.881.001.001.131.131.251.251.381.38
2.382.753.133.503.884.755.506.007.007.508.509.50
11.7514.2517.0018.7521.2522.7525.0027.2529.50
2233468
1012151924395280
110140150180225260
WELDING NECK 300#
+52(81)1646-9090 (main) www.dlineproducts.com
½¾1
1¼1½2
2½3
3½4568
1012141618202224
3.754.634.885.256.136.507.508.259.00
10.0011.0012.5015.0017.5020.5023.0025.5028.0030.5033.0036.00
0.560.630.690.750.810.881.001.131.191.251.381.441.631.882.002.132.252.382.502.632.75
ANSI B16.5 CLASS 300 WELDING NECK FLANGES
Nominal Pipe Size
*All dimensions are in inches. These flanges will be furnished with a 1/16" raised face unless otherwise specified.Flat face option available.Standard Bore will be furnished unless otherwise specified.
Outside Diameter (O)
Thickness (T)
Raised Face Diameter (R)
Lenght Thru Hub (Y)
Point of Weld (A)
Bore (B)
Numberof Holes
Diameterof Holes
BoltCircle (C)
Approximate Weight (lbs)
1.381.692.002.502.883.634.135.005.506.197.138.50
10.6312.7515.0016.2518.5021.0023.0025.2527.25
2.052.252.442.562.692.753.003.133.193.383.883.884.384.635.135.635.756.256.386.506.63
0.841.051.321.661.902.382.883.504.004.505.566.638.63
10.7512.7514.0016.0018.0020.0022.0024.00
0.620.821.051.381.612.072.473.073.554.035.056.077.98
10.0212.0013.2515.2517.2519.2521.2523.25
44444888888
12121616202024242424
0.630.750.750.750.880.750.880.880.880.880.880.881.001.131.251.251.381.381.381.631.63
2.633.253.503.884.505.005.886.637.257.889.25
10.6313.0015.2517.7520.2522.5024.7527.0029.2532.00
234579
1215182532426791
140180250320400465580
Hub Diameter (X)
1.501.882.132.502.753.313.944.635.255.757.008.13
10.2512.6314.7516.7519.0021.0023.1325.2527.63
+52(81)1646-9090 (main) www.dlineproducts.com
½¾1
1¼1½2
2½3
3½4568
1012141618202224
3.754.634.885.256.136.507.508.259.00
10.7513.0014.0016.5020.0022.0023.7527.0029.2532.0024.2537.00
0.560.630.690.810.881.001.131.251.381.501.751.882.192.502.632.753.003.253.503.754.00
ANSI B16.5 CLASS 600 WELDING NECK FLANGES
Nominal Pipe Size
*All dimensions are in inches. These flanges will be furnished with a 1/4" raised face unless otherwise specified.Flat face option available.
Outside Diameter (O)
Thickness (T)
Raised Face Diameter (R)
Lenght Thru Hub (Y)
Point of Weld (A)
Bore (B)
Numberof Holes
Diameterof Holes
BoltCircle (C)
Approximate Weight (lbs)
1.381.692.002.502.883.634.135.005.506.197.138.50
10.6312.7515.0016.2518.5021.0023.0025.2527.25
2.062.252.442.632.752.883.133.253.384.004.504.635.256.006.136.507.007.257.507.758.00
0.841.051.321.661.902.382.883.504.004.505.566.638.63
10.7512.7514.0016.0018.0020.0022.0024.00
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
44444888888
12121620202020242424
0.630.750.750.750.880.750.880.881.001.001.131.131.251.381.381.501.631.751.751.882.00
2.633.253.503.884.505.005.886.637.258.50
10.5011.5013.7517.0019.2520.7523.7525.7528.5030.6333.00
23468
12182326426881
120190225280390475590720830
Hub Diameter (X)
1.501.882.132.502.753.313.944.635.256.007.448.75
10.7513.5015.7517.0019.5021.5024.0026.2528.25
WELDING NECK 600#
+52(81)1646-9090 (main) www.dlineproducts.com
½¾1
1¼1½2
2½34568
10121416182024
4.755.135.886.257.008.509.639.50
11.5013.7515.0018.5021.5024.0025.2527.7531.0033.7541.00
0.881.001.131.131.251.501.631.501.752.002.192.502.753.133.383.504.004.255.50
ANSI B16.5 CLASS 900 WELDING NECK FLANGES
Nominal Pipe Size
Outside Diameter (O)
Thickness (T)
Raised Face Diameter (R)
Lenght Thru Hub (Y)
Point of Weld (A)
Bore (B)
Numberof Holes
Diameterof Holes
BoltCircle (C)
Approximate Weight (lbs)
1.381.692.002.502.883.634.135.006.197.138.50
10.6312.7515.0016.2518.5021.0023.0027.25
2.362.752.882.883.254.004.064.004.505.005.506.387.257.888.388.509.009.75
11.50
0.841.051.321.661.902.382.884.004.505.566.638.63
10.7512.7514.0016.0018.0020.0024.00
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
4444488888
121216202020202020
0.880.881.001.001.131.001.131.001.251.381.251.501.501.501.631.752.002.132.63
3.253.504.004.384.886.507.507.509.25
11.0012.5015.5018.5021.0022.0024.2527.0029.5035.50
569
10132536315386
110175260325400495680830
1500
Hub Diameter (X)
1.501.752.062.502.754.134.885.006.257.509.25
11.7514.5016.5017.7520.0022.2524.5029.50
WELDING NECK 900#
*All dimensions are in inches. These flanges will be furnished with a 1/4" raised face unless otherwise specified.Flat face option available.
+52(81)1646-9090 (main) www.dlineproducts.com
½¾1
1¼1½2
2½34568
10121416182024
4.755.135.886.257.008.509.63
10.5012.2514.7515.5019.0023.0026.5029.5032.5036.0038.7546.00
0.881.001.131.131.251.501.631.852.132.883.253.634.254.885.255.756.387.008.00
ANSI B16.5 CLASS 1500 BLIND FLANGES
Nominal Pipe Size
Outside Diameter (O)
Thickness (T)
Raised Face Diameter (R)
Lenght Thru Hub (Y)
Point of Weld (A)
Bore (B)
Numberof Holes
Diameterof Holes
BoltCircle (C)
Approximate Weight (lbs)
1.381.692.002.502.883.634.135.006.197.138.50
10.6312.7515.0016.2518.5021.0023.0027.25
2.362.752.882.883.254.004.064.634.886.136.758.38
10.0011.1311.7512.2512.8814.0016.00
0.841.051.321.661.902.382.883.504.505.566.638.63
10.7512.7514.0016.0018.0020.0024.00
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
4444488888
121212161616161616
0.880.881.001.001.131.001.131.251.381.631.501.752.002.132.382.632.883.133.63
3.253.504.004.384.886.507.508.009.50
11.5012.5015.5019.0022.5025.0027.7530.5032.7539.00
569
101325364873
130165275455690940
1250162520503325
Hub Diameter (X)
1.501.752.062.502.754.134.885.256.387.759.00
11.7514.5017.7519.5021.7523.5025.2530.00
WELDING NECK 1500#
*All dimensions are in inches. These flanges will be furnished with a 1/4" raised face unless otherwise specified.Flat face option available.
WELDING NECK 2500#
+52(81)1646-9090 (main) www.dlineproducts.com
2346
9.2512.0014.0019.00
2.002.623.004.25
ANSI B16.5 CLASS 2500 WELDING NECK FLANGES RTJ
Nominal Pipe Size
*All dimensions are in inches.
Outside Diameter
(O)
Thickness (T)
Grooved Face
Diameter (R)
Lenght Thru
Hub (Y)
Point of Weld
(A)
Bore (B)
Numberof Holes
Diameterof Holes
BoltCircle
(C)
Approximate Weight (lbs)
5.256.638.00
11.00
5.006.627.50
10.75
2.383.504.506.63
Specified by purchaser
Specified by purchaser
Specified by purchaser
Specified by purchaser
8888
1.121.381.632.12
6.759.00
10.7514.50
42.1094.13
146.16378.31
Hub Diameter
(X)
3.755.256.509.25
XA
B
RC
Y
T
DE23º
Groovedlength
(E)
GroovedNumber
0.470.430.660.78
R26R32R38R47
GroovedThickness
(D)
0.310.380.440.50
O