Anritsu Shortform Introduction Catalog

5/20/2018 Anritsu Shortform Introduction Catalog

1/32

www.anr i t su . com

Test & MeasurementSolutions

(ES) Equipements Scientifiques SA - Dpartement Tests Energie Mesures - 127 rue de Buzenval BP 26 - 92380 GarchesTl. 01 47 95 99 45 - Fax. 01 47 01 16 22 - e-mail: [email protected] - Site Web: www.es-france.com


2/322

Introduction

Our product range spans the entire network life cycle, from research, development and conformance testing tooptimisation and service assurance. This, combined with a reputation for building highly reliable instruments and thebacking of a comprehensive global support and service network, firmly underlines our commitment to provide ourcustomers an unparalleled experience. Anritsu's heritage includes extensive history and innovation in RF &Microwave technologies for the communications, aerospace, defence and education industries. This innovationcontinues today.

Combining this with Anritsu's lead in communications allows us to offer unique solutions that gain from our expertisein all these areas. Partnerships with global telecom leaders and participation in standards organisations allows usto provide the most complete range of test and measurement and service assurance solutions available today.

A proven developer, Anritsu is committed to holding its leading position as applications evolve and new testchallenges arise, providing solutions that help customers meet their business objectives today and protect theirinvestments as they develop future technologies & services.

This product guide organizes products into one of five key product areas as follows:

Mobile/Wireless page 3Service Assurance page 10Transport/Datacoms page 12Optical page 16RF and Microwave page 22

Discover......Anritsu.

Get the righttool for the job.

Visit www.anritsu.com for the latestproduct news and resources.


3/32w w w. a n r i t s u . c o m

Mobile/Wireless

Anritsu has a full range of 2, 2.5, 3, and 4G test products as well as 802.x and Bluetooth wireless technologies, all based on

Anritsu's global leadership in developing and testing wireless user equipment, chipsets, and networks. Features and options

allow highly accurate performance with low noise and interference for current and next-generation 3GPP, 3GPP2, and IEEE

standards.

MD8430A LTESignalling Tester

see page 4

MF6900AFading Simulator

see page 5

MG3700AVector Signal Generator

see page 7

BTS Mastersee page 8

MD8480CSignalling Tester

see page 4

MD8470ASignalling Tester

see page 5

MS2690A/91A/92ASignal Analyzer

see page 7

Site Master Seriessee page 8

Cell Mastersee page 8

ME7832AProtocol Conformance

Test Systemsee page 5

MT8820B/15B RadioComms Analyzer

see page 6

ML8740B/20CArea Scannersee page 8

MF7873F/74F RF Con-formance Test System

see page 6

Spectrum Mastersee page 23

Rapid Test Designersee page 4

Protocol Test Systemsee page 4

Protocol ConformanceToolkit

see page 5

Test equipment for the next generation of mobile communications

MT8510BService Tester

see page 6


4/324

Mobile/Wireless

| Mobile/Wireless Testing Solutions

When it comes to next generation mobiletest, were one step ahead.

MD8430A LTE Signalling Tester

Responsive support for latest 3GPP LTE standard.

All-in-one 2x2 MIMO system handover and 100 Mbps(DL) and 50 Mbps (UL).

Maximizing MD8480C hardware investment with inter-RAT handover tests.

Investment tailored to applications ranging from R&D toprotocol conformance tests.

Easy L3 scenario R&D and full range of analysis tools.

The MD8430A Signalling Tester is an

essential base station simulator, for

testing LTE chipsets and mobile

terminals. It is the perfect test solution

for bringing LTE terminals to market as

quickly as possible, based on Anritsus

extensive knowledge of modern wireless technologies.

MD8480C W-CDMA Signalling Tester

Simulation of base stations (4 W-CDMA and 2 TDMAcells) for modern wireless terminal testing.

R&D development of W-CDMA, HSPA,GSM/GPRS/EGPRS chipsets and terminals.

Rel 7 HSPA Evo capability with 64QAM and 2x2 MIMO.

Improved L2, CPC and enhanced Cell FACH.

The MD8480C W-CDMA Signalling

Tester has been specifically designed

for developing and testing 3GPP UE.

Supporting W-CDMA, HSPA, HSPA

Evolution, GSM, GPRS and EGPRS

services in a single unit, it is the industry's first HSPA

Evolution signalling tester with full HSPA Evolution capability

including maximum data throughput of 28 Mbps in the

downlink with 2x2 MIMO and 11 Mbps in the uplink. The

MD8480C's air interface fully complies with the 3GPP

recommendations.

MX786201A W-CDMA Rapid Test Designer (RTD)

Supports Release 99 to Release 8, including InterRATtesting.

Software tool for integration test and configuration ofLayer 3 (Call Processing) and configuration of Layer 1 & 2.

L1, L2 and L3 test procedures for creating test scenarios.

Graphical flow chart for creating scenarios to simulateterminal behaviour.

The Rapid Test Designer (RTD) is a

revolutionary tool which speeds the

testing of protocol behaviour in

wireless terminals, by simplifying the

way in which tests are created,

executed and analyzed. The test tool hides much of the

complexity of testing 3GPP protocols, allowing the user to

concentrate on specific functions and behaviour within the

UE without being an expert on all protocol layers or

knowing how to program the System Simulator. The PC-based software environment is used in conjunction with

Anritsu's MD8480C and/or MD8430A Signalling Testers.

RTD

MX785201A Protocol Test System (PTS)

Supports Release 99 to Release 8, including InterRATtesting.

3GPP Standard compliant development tool.

W-CDMA L3 & L2 protocol test capability.

Supporting TTCN and C as a programming language.

Designed for testing modern wireless

terminals, the MX785201A W-CDMA

Protocol Test System enables Layer

2/3 signalling protocol to be tested

during terminal design, integration

and regression phases. The PC-based software environment

is used in conjunction with Anritsu's MD8480C or MD8430A

Signalling Testers allowing C or TTCN protocol test cases to

be executed and results analyzed.

PTS

Mobile Terminal ProtocolAnritsu provides a comprehensive range of tools and applications for development and

proving the RF performance and complex protocols used in modern wireless terminals. The

range of applications covers R&D to terminal proving and acceptance.



ME7832A Protocol Conformance Test System (PCTS)

Covers the highest number of GCF/PTCRB test cases forW-CDMA UE protocol conformance.*

Proven platform to provide HSPA Evolution for protocol

conformance test. Advanced automation environment.

Parallel Test Controller option enables dramatic test timereduction.

The ME7832A Protocol

Conformance Test System is an all-

inclusive integrated W-CDMA UE

protocol conformance test solution

for test houses, UE manufacturers,

and chip set manufacturers/

integrators that covers the largest number of test cases in

the industry based on 3GPP TS34.123-1 for GCF/PTCRB

terminal certification. Integration with the MD8480C W-

CDMA Signalling Tester and MX785220A Protocol

Conformance Test Toolkit eliminates troublesome setup,

such as cable connections, software installation, and level

correction, to maximize protocol conformance testing

efficiency and shorten time to market.

* Correct at time of printing

MX785220A Protocol Conformance Toolkit (PCT)

Easy to use graphical interface.

Providing approved test cases for GCF & PTCRB Rel 99to Rel 8.

Integrated protocol analyzer for detailed analysis and

debug.

MX785220A Protocol Conformance

Toolkit is a component of the

ME7832A allowing existing users of

MD8480C and MD8430A to

configure their own system to

execute approved conformance test cases.

PCT

MD8470A Signalling Tester

Simple operation by GUI or scenarios that define BTSoperations at L3 level.

Supports multiple communication systems including W-CDMA/HSDPA/HSUPA, GSM/GPRS/EGPRS, CDMA20001X/1xEV-DO Rev.A and TD-SCDMA.

Throughput measurements to 14.4 Mbps (W-CDMA/HSDPA) and 5.76 Mbps (W-CDMA/HSUPA).

The MD8470A Signalling Tester is an

all-in-one base station simulator with

excellent cost-performance

supporting UE application tests, suchas voice calls, video calls, data downloads and SMS/MMS

for GSM/GPRS/EGPRS, W-CDMA/HSDPA/HSUPA

compliant mobiles. An easy to use GUI known as the

Wireless Network Simulator (WNS) is provided for setting

up calls to allow simple testing of different applications. Also

end-to-end testing of voice, video, and SMS/MMS

applications between two mobiles can now be tested using

just one MD8470A unit and the Couple-UE Network

Simulator (CNS) software. The MD8470A also allows layer-3

message sequence to be freely configured and scenarios

can be built to test a huge range of applications.

MF6900A Fading Simulator

High reproducibility and maintenance freemeasurements using fully digital baseband processing.

All-in-one support for LTE 2-cell 2x2 MIMO handovertests + LTE 2x2 MIMO W-CDMA handover tests.

Easy fading settings using a dedicated interface withMD8430A/MD8480C.

Versatile and expandable hardware platform.

The MF6900A Fading Simulator

connects via a dedicated digital

interface to the MD8430A Signalling

Tester to configure a simple LTE base

station test system for simulating 3GPP LTE 2x2 MIMO

fading.


6/326

Mobile/Wireless

| Mobile/Wireless Testing Solutions

MT8510B Service Tester

Simple operation, automatic evaluation.

Remote control from PC connected by LAN interface.

Easy evaluation of test result, through test status/judgement lamp display and large color TFT LCD display.

Results can be output through a built-in printer and/ordownloaded to USB flash memory or external PC.

The MT8510B is a Go/NoGo tester for

testing W-CDMA and GSM mobile

phones, with applications in after salesservice and final inspection in the UE

manufacturing process. The MT8510B is simple to operate

with single button operation and a large screen. It tests the

main RF Parameters of a Receiver/Transmitter of a W-

CDMA/GSM phones and provides a Pass Fail evaluation

visually by the Test Status/judgment lamp and large LCD

display. The results can also be printed directly via the built

in printer and are also stored in .CSV format which can be

recalled using USB flash memory or an external PC.

ME7873F W-CDMA TRX/Performance Test SystemME7874F W-CDMA RRM Test System

Conforms to 3GPP standards including TS34.121 for Rel-99, Rel-5, Rel-6, HSDPA and HSUPA testing.

Supports multi-band frequencies: including GCF Bands I& VIII, PTCRB Bands II, IV and V.

The ME7873F provides testing

capabilities conformant to the 3GPP

TS34.121 Test Specification, including

Transmitter, Receiver, Performance,

RRM, HSDPA and HSUPA testing.

The ME7874F is focused on RRM

testing. In addition, the ME7873 and ME7874 can both be

operated in various Frequency Bands, including Band I (2

GHz), Band II (1.9 GHz), Band III (1.8 GHz), Band IV (1.7/2

GHz), Band V (850 MHz), Band VI (800 MHz), Band VIII (900

MHz), Band IX (1.7 GHz) and Band XI (1.5 GHz). The

TS34.121 Conformance Tests form part of the requirements

for Mobile Terminal Certification testing defined by both the

GCF (Global Certification Forum) and the PTCRB (PCS Type

Certification Review Board). The ME7873/ME7874F has

enabled Anritsu to be the industry leading contributor for

GCF and PTCRB RF test case validation approvals.

Mobile Terminal Performance

MT8820B Radio Communication Analyzer

W-CDMA/HSDPA/HSUPA/HSPA Evolution, GSM/GPRS/EGPRS,TD-SCDMA/HSDPA, CDMA2000 1X (IS-2000),CDMA2000 1xEV-DO and PHS/ADVANCED PHStransmitter, receiver and performance tests in a singleunit.

Manufacturer Test Suite (MTS) offers manufacturers of W-CDMA/HSDPA/ HSUPA and GSM/GPRS/EGPRS mobileterminals the ideal cost-effective solution for productionline RF adjustments and RF Tx/Rx parametric tests.

MT8820B has dual independent RF, AF, GPIB, andEthernet connectors (Parallel Phone Measurement) thatcan be controlled separately, significantly reducingfacility costs and space requirements.

With a frequency range of 30 MHz to

2.7 GHz, the MT8820B performs

transmitter and receiver tests on all the

major standards of mobile terminals

for both R&D and manufacturing.

MT8815B Radio Communication Analyzer

Multi-system test platform that covers all the majormobile phone technologies.

Supports detailed failure diagnosis and evaluation of allthe main mobile phone transmission/reception testitems.

Real-time voice encoding and decoding.

Test function for packet communication data transfer.

The MT8815B Radio Communication Analyzer is a multi-system test platform that covers all the major mobile phone

technologies with just 1 unit. This platform supports detailed

failure diagnosis and evaluation of all the main mobile phone

transmission/reception test items. It incorporates advanced

DSP technology, parallel-measurement and batch

measurement technologies. The one-touch operation

supports easy and quick measurement of Tx and Rx

characteristics. The combination of the MT8815B and the

MT8510B Service Tester provides coverage from the

"Service Point" to the "Advanced Repair Center" for service

of individual W-CDMA/GSM or GSM mobile phones.



MG3700A Vector Signal Generator

Wanted signal and interfering signals can be output with

one box for ACS and Blocking.

With two ARB memories, the user can adjust the leveland the offset frequency after setting two patterns.

Built in BER analyzer from 1 kbps to 120 Mbps (optional).

Removable 40 GB hard disc allows confidential data tobe protected during repair and calibration.

IQproducer with WiMAX (MIMO), HSPA, Multicarrierand DVB-T/H.

The MG3700A Vector Signal Generator

supports digital modulation of signals

for all major wireless communicationsystems such as cellular phones

(LTE/W-CDMA/cdma2000/GSM), WiMAX, XGP and

WLAN's up to the 6 GHz band. With a high-speed (160 MHz)

base-band generator producing waveform as a standard

feature, the unit outputs the digital modulation signals of

various communication systems simply by selecting the

desired waveform pattern file. This allows for the efficient

performance assessment of base stations and mobile

terminals for existing & next-generation wireless

communication systems.

MS2690A/91A/92A Signal Analyzer

Vector signal generator and analyzer in one box.

Frequency coverage up to 26.5 GHz.

Advanced architecture provides top-of-the-line RFperformance.

Class leading Vector Signal Analysis function combinesspeed and reliable RF performance.

The MS269XA Series incorporates a

Signal Analyzer, Signal Generator and

RNC Simulator in a hassle free, plug

and play, single box solution for next

generation signal analysis. Using an extendible module

structure, a range of options can be added according toyour need. The MS269XA series are suitable for use across

the mobile market, supporting GSM, GPRS, EDGE, EDGE

Evolution, W-CDMA, HSPA, HSPA Evolution, WiMAX and

LTE.


8/328

Mobile/Wireless

| Mobile Infrastructure and Wireless Access Solutions

Mobile Infrastructure Performance

MT8221B Handheld Base Station Analyzer - BTSMasterTM

Increase system up-time with 1- and 2-port cable andantenna analysis.

Lab-grade spectrum analysis in a handheld package.

Demodulate and display W-CDMA/HSDPA signals.

The MT8221B BTS Master is a

lightweight, handheld base station

analyzer that provides wireless field

technicians with a single test solution

for installing, deploying, andmaintaining today's complex wireless networks.

Weighing less than 5 kg, the MT8221B BTS Master

comprises a complete set of tools that includes a cable and

antenna analyzer, spectrum analyzer, power meter, W-

CDMA/HSDPA, GSM/GPRS/EDGE and Fixed WiMAX RF

and demodulation, W-CDMA/HSDPA Over the Air (OTA),

interference analyzer, Bit Error Rate Tester (BERT), channel

scanner, and power monitor, and a Vector Signal Generator

for receiver testing. Eliminating the need for technicians to

carry several instruments in the field.

MT8212E Base Station, Cable & Antenna Analyzer -Cell MasterTM

2-port transmission measurement: High/low power

Sweep speed: 1 msec/data point, typical

Dynamic range: > 95 dB in 1 Hz RBW

DANL: -152 dBm in 10 Hz RBW

Phase noise: -100 dBc/Hz max @ 10 kHz offset at 1 GHz

The MT8212E is a handheld multi-

function base station analyzer that

combines all the tools required to

deploy, maintain and troubleshoot

wireless base stations into a lightweight, battery-operated

package. Integrating all this functionality in a single

instrument eliminates the need to buy separate equipment

for new and legacy networks, which increases efficiencies

and simplifies data acquisition. Cell Master features signal

analyzer options for 2G and 3G cellular networks, and

WiMAX fixed and mobile networks.

Quickly and easily perform allmeasurements for wireless network

deployment, installation and maintenance.

Site MasterTM

Series Handheld Cable and AntennaAnalyzers

To keep up in today's rapidly expanding

and evolving wireless communications

market, you're required to service more

base stations than ever both 2G as

well as the new 3G and 4G networks. The latest Site

Master completes sweeps quickly, performs calibrations

instantly, and implements fast trace naming under even the

most punishing field conditions. And it does all this while

delivering the ease of use, rich functionality, and best-in-class

price/performance you've come to expect from Anritsu.Designed to get the job right the first time, Site Master

transforms the traditional fix-after-failure maintenance model

to one that helps you identify and fix problems before major

failures occur.

See page 28 for more details about Site Master.

ML8740B/20C W-CDMA/HSDPA/GSM Area Scanner

Supports BCH demodulation to check broadcastinformation.

Two rake receiver design providing high-speed and high-accuracy area analysis.

High-speed search with SCH & Correlation with GPSpositioning data.

The ML8740B is a non-display Area

Scanner and performs drive tests for

optimising base station service areas.

Excellent hardware performance provides accurate area-

coverage tests in severe environments with highinterference and poor coverage, obtaining radio wave

carrier characteristics with extremely high reliability. Greatly

improved data collection efficiency and the installation of

BCH Demodulation software option permits confirmation of

cell Id and base station broadcast parameters, thus allowing

the identification of base stations that are incorrectly

configured.

The ML8720C portable area tester is

used for area coverage and other

indoor measurements.



MT8860C WLAN Test Set

Integrated test set for 802.11b/g/a transmitter andreceiver measurements.

Universal solution for all WLAN chip sets.

Shorter test system design time.

The MT8860C, one-box, WLAN Test

Set is dedicated to testing devices

conforming to IEEE 802.11 standards,

providing high-speed measurements

for production testing and design

proving. It is the only test set to offer both Network Mode

MT8852B Bluetooth Test Set with EDR and LowEnergy

Supports measurements of Bluetooth Basic Rate and EDR.

Option for new Bluetooth low energy measurements.

Measurements performed as defined in Bluetooth RFTest specification.

BlueSuite Pro3 software for graphical traces of FSKmodulation, PSK constellation diagrams, power ramp,individual channel measurements and receiver sensitivitysearch.

BlueTest2 software for automated high volumeproduction line testing.

Tests Bluetooth modules & products in under 5 seconds.

AFH option for testing performance in presence ofinterfering sources such as WLAN.

The MT8852B Bluetooth BR/EDR test

set provides radio layer measurements

in compliance to the Bluetooth 1.2, 2.0

+ EDR and 3.0 core specifications. The

test set uses Bluetooth test modes including RF loopback.

Ideal for design proving and production test of all Bluetooth

products including; mobile phones, computers and

peripherals, headsets, telephony products, audio gateways

and AV products.

Support for audio measurements is also provided, fully

compliant with requirements defined in the Bluetooth audio

specification. MT8852B supports all three codec air

interfaces (law, A-law and CVSD) on up to three SCO audio

channels, offering the most comprehensive facilities on any

Bluetooth test set.

Anritsu's Bluetooth Testers provide a fullrange of test capabilities for all R&D,manufacturing, and field applications.

Wireless Access

MT8855A BluetoothAudio Test Set

20 Hz to 20 kHz frequency coverage

THD, THD+N, SINAD distortion measurements

Graphical measurements of frequency response, plusTHD+N vs level and frequency

Audio FFT analyzer aides fault finding

PC-installed user interface: BlueAudio

Auto mode runs user defined test plans for productiontesting

The MT8855A is the worlds first test

set designed specifically to performhigh-quality audio measurements onproducts using the Bluetooth

Advanced Audio Distribution Profile (A2DP), the Headsetprofile, or the Hands-Free profile.

The MT8855A is the ideal instrument for both design

validation and manufacturing test. Typical Bluetooth

products that can be tested with the MT8855A include

stereo and mono headsets, mobile phones, digital music

players, integrated and accessory car kits, and desktop

speakers. Accessory microphones and speakers connect

directly to the MT8855As audio inputs and outputs toenable the development of a complete test system. Module

testing is also facilitated using direct connection to the RF

and audio connectors.

(protocol based measurements) and Direct Mode (protocolfree measurements).

This single instrument solution is faster to integrate into

production, offering a universal solution for all WLAN chip

sets with simple maintenance and calibration reducing test

system cost and increasing production throughput.

MT8860C is supplied with LANLook user interface for

instrument configuration and measurement display in

design proving applications and LANTest software for high

volume production test applications.


10/3210

Service Assurance

| Service Assurance Solutions

Anritsus Service Assurance solutions is probe based non-intrusive monitoring systems designed to provide full end-to-end

monitoring of converged networks for GSM, GPRS, UMTS, SS7 and VoIP networks. Signalling and user plane data captured bythe distributed intelligent probes is turned into critical business and operational information available to the users in both real-

time, dashboards and via comprehensive reports.

Our two solutions eoPath and MasterClaw builds on Anritsus long experience in the Service Assurance area and our award-

winning network monitoring solutions. MasterClaws ability to capture data in converged and next-generation networks makes

it an ideal source of data for eoPath.

MasterClaw integrates network monitoring, troubleshooting as well as service and customer quality monitoring of converged

networks. The integrated Service Assurance environment enables network operators and service providers to monitor their

network as a unified service platform as opposed to treating each service and network segment as a separate entity.

eoPath gives you a real-time, end-to-end view of your customers experience, and pinpoints the causes of poor quality service.No need to worry about new network technologies, the rising diversity in handsets, or the migration to IMS and all-IP/LTE next-

generation networks: eoPath provides you with the information you need to deliver high-quality service to your customers

efficiently.

MasterClaw

Building on the same converged data acquired from the network, MasterClaw offers powerful reporting capabilities across

Network, Service, Customer and Partner domains in both real-time and via KPI- and KQI reports. In addition to this MasterClaw

allows for definition of service level targets enabling both internal and external SLAs.

Service Assurance Solutions


11/32

He owns 18645 handsets, andpays for 875397 calls everydayDont mess around with him.

w w w. a n r i t s u . c o m

eoPath

eoPath is a service management suite that offers a range of applications to give your entire organization an unparalleled overview

of your network and services. eoPath helps you reduce operating costs, improve service quality, manage partners and reduce

churn.eoPath provides an instant view of your service operation and how your customers experience your services. It gives you access

to workflows, analytical reports and SLA management to help you improve your service quality, allowing you to realize the

potential in your converged and NGN/LTE networks and services.

Network Quality Monitoring

Detailed statistics on link and message level allows for identification of network bottlenecks, faulty network segments and general

load and resource utilization.

Service Quality Monitoring

Operators and service providers can monitor the effect of advertising campaigns or price adjustments, identification of real target

groups, or general optimization of the service portfolio.

Customer QoS/SLA Monitoring

Dedicated real-time QoS and performance reports for particular important accounts.

Partner Performance Monitoring

Dedicated KPIs and KQIs allows for monitoring of roaming partners, interconnect

partners and partners providing content and services.


12/3212

Transport/Datacoms

| Transport/Datacoms Testing Solutions

MD1230B Data Quality Analyzer

QoS Performance Test & VPN QoS Traffic Monitoring.

Integrated NAI 'Sniffer' decode and expert functionality.

Physical Interface for 10 Mbit/s to 10 Gbit/s.

Multiport capability up to 60 ports in one portablemainframe.

Triple play dedicated analysis tools.

The MD1230B is a powerful

Ethernet/IP network data analyzer with

dual functionality of wire speed

performance analysis and networkmonitoring integrated into the same instrument. Intuitive

Windows XP-based GUI and card based architecture makes

the MD1230B a versatile and an easy-to-use solution for all

network testing environments, ranging from R&D and

manufacturing to installation & maintenance.

MP1590B Network Performance Tester

Error analysis measurements conforming to ITU-T Rec.G.821/G.826/G.828/G.829.

Poisson error insertion capability enables correct FECfunction evaluation conforming to ITU-T 0.182.

Full 10G-band Multichannel Measurement (STM-0/OC-1to STM64/OC-192; max 5376 VC11/VT1.5SPE, 4032 xVC12/VT2SPE).

11.1G Lan-Phy over OTN Interface (ITU-T G. Sup.43OTU1e and OTU2e).

EoS, Virtual Concatenation, LCAS measurement.

Anritsu's MP1590B, the most

complete, converged performance

tester available today provides analysis

for PDH, SDH, SONET, OTN, Jitter and

Ethernet in support of component development,

integration and system maintenance. This single unit tester

enables fast fault finding and improved efficiency for

maintaining high standards of QoS. More importantly the

unit helps forward planning when more complex systems

are developed, making sure the network always gets the

green light.

Solutions for testing and measuring throughput and performance across the full range of digital

communication standards and protocols -- including high speed Ethernet, IP, OTN, ATM,

SONET/SDH, EoS, jitter, and bit error rate testing. These highly accurate instruments are ideally

suited for the development, manufacture, deployment, and maintenance of network componentsand equipment at speeds up to 48 Gbps and above.

Model

MP1590BNetwork Performance Tester

MP1595A40G SDH/SONET Analyzer

MD1230BData Quality Analyzer

CMA5000aMulti-Layer Network Test Platform

CMA 3000All-in-one FieldTester

MT9090A/MU909060AGigabit Ethernet Tester

PDH

STM-1

STM-4

STM-1

6

STM-6

4

STM-2

56

OTU1

OTU2

OTU3

IP Ethernet

GigE

10GigE

Jitter

V-series

interfaces

101001010010010100110

100100100101010010100

100101001010010100101

01010DATACOMS01010010101010010101010100

010101010101010101011

101010101101010101100


13/32w w w. a n r i t s u . c o m

MP1595A 40G SDH/SONET Analyzer

40G/43G SDH/OTN Analyzer.

1.5 Mbps to STM256/OC768 and OTU1, 2 and 3.

DPSK modulation format for OTU3.

40G/43G Jitter measurement in combination withMP1797A.

The MP1595A is an extension to the

market leading MP1590B range of

PDH, SDH and OTN testers. It is

based on the same well proven, easyto use operation software from the

MD1230B/MP1590B test family. The MP1595A is a seven

slot mainframe capable of testing up to OTU3 and

incorporating the unique Poisson Error distribution FEC

stress tool from the MP1590B family. The MP1595A

provides high speed testing of framed signals in a

convenient, portable test mainframe giving excellent value

and outstanding performance.

MP1800A/MT1810A Signal Quality Analyzer

Highest quality waveforms including lowest intrinsic jitter.

Jitter modulation up to 25 Gbit/s.

Expandable slot configurations for serial and parallelapplications.

The MP1800A Signal Quality Analyzer

(SQA) is a measuring instrument that

provides bit error rate and quality

analysis for serial digital signals directly

from 100 Mbit/s to 28 Gbit/s with configurations that

support 56 Gbit/s. The modular design of the MP1800A

Signal Quality Analyzer (SQA) series offers customers a

flexible cost-effective solution for performing

measurements at the ideal bit error rate.

The MP1800A SQA provides Pulse Pattern Generator (PPG)

and Error Detectors (ED) in a single chassis. It allows for

multi-channel support for parallel testing. Complicated

searching for input thresholds or phase adjustments is

simplified with the touch of a single key. It is ideal for

research and development of 100 GE, optical modulators,

high-speed logic, ICs, digital systems, and PON.

MP1591A Network Performance Tester Multi-slotChassis

Rack-type chassis mounts all modules from MD1230/MP1590 family.

Up to 16 modules.

The MP1591A Network Performance Tester

features a 20-slot chassis design supporting

multiple ports of 10 M to 10 G for Ethernet

analysis as well as 1.5 M to 10.7 G for

SONET/SDH, OTN, and Jitter analysis. The

broad testing capability and high port capacity of the

MP1591A makes it a unique single-instrument solution for

optical device manufacturers whose products are designed

into Multi-Service Transport Platforms (MSTPs) and Multi-

Service Provisioning Platforms (MSPPs), as well as for service

providers who must maintain networks utilising

MSTP/MSPP technology.

MP1026B Bit Master Handheld Eye Pattern Analyzer

Two electrical channel input of 25 GHz bandwidth eachsupport 10 Gbps testing.

Measurement displays of eye pattern and pulse pattern

verifies transmitter performance.

Low-cost compliance mask testing.

The Bit Master MP1026B Eye Pattern

Analyzer allows engineers to conduct

highly accurate eye pattern

measurements for data rates from 0.1 to

12.5 Gbps. Typically half the price of a high-speed sampling

oscilloscope, the MP1026B supports popular OC-192/STM-

64 SONET/SDH, 10G Fibre Channel, and 10G Ethernet

systems at the physical layer, and can verify the performance

of high-speed circuits, transceivers, and transponders, aswell as network equipment.

Developed to address the deployment of high-speed

networks, the MP1026B can be equipped with a fully

internal optical receiver for measuring fibre signals up to

12.5 Gbps, making it well suited for Network Equipment

Manufacturer (NEM) applications.


14/32

CMA5000a Multi-Layer Network Testing Platform

One platform does it all: - physical layer applications(OTDR, PMD, CD, OSA) - transport layer applications(10 M to 10 Gigabit Ethernet, SDH/SONET to 10 Gbps).

Common Windows based user interface simplifies use.

Modular design allows unit to be customized

Simultaneous operation of multiple test applications.

The CMA5000a is a field portable, network testing platform

designed for installation, maintenance and troubleshootingof today's complex networks. It features a common user

interface, open architecture design and numerous test

technologies that allow the platform to evolve with user

testing needs and address ever-changing

telecommunication infrastructures.

Modules include:

Gigabit Ethernet application (GigE)

10 Gigabit Ethernet application (10 GigE)

DS/PDH to 10 Gig SONET/SDH testing (XTA)

SONET/SDH up to 10 Gig, OTU-1 and OTU-2, 10 GigEtesting (UTA)

Optical Time Domain Reflectometer application (OTDR)

Optical Spectrum Analysis application (OSA)

Polarization Mode Dispersion application (PMD)

See the Optical section of this guide for details on the

CMA5000a Optical modules.

14

Transport/Datacoms

| Transport/Datacoms Testing Solutions

MT9090A/MU909060A Network Master GigabitEthernet Tester

Comprehensive Ethernet testing for installation,maintenance and troubleshooting.

Ping test and electrical cable diagnostics.

Options for automated RFC 2544 and multistream testing.

Test Automator simplifies operation and ensures proper set-up.

The Anritsu Network Master with

Gigabit Ethernet module is a

comprehensive solution for testing

Gigabit Ethernet lines. The small,

rugged, battery operated and easy-to-use Gigabit Ethernettester is specifically designed for installation and

maintenance of Ethernet access networks. The instrument

gives the user facilities for easy bandwidth verification,

connectivity testing and service availability verification.

Despite its small size the instrument is equipped with a large

colour display, where the graphical user interface and the

test Automator makes it easy to test and troubleshoot

Ethernet connections.

CMA 3000 All-in-One Field Tester

SDH (STM-1/STM-4/STM-16), PDH (E1/E3/E4), Ethernet(10/100/1000), V-series interfaces.

IP over Ethernet, VoIP, Ethernet stacked VLAN, MPLS,ATM, frame relay, mobile (GSM, GPRS/EDGE, 3G).

Ease of operation with touch screen-based operation.

Battery operation, compact and lightweight, easy tocarry around.

Covering a wide range of applications,

this versatile, all-in-one field tester for

fixed and mobile access networks

supports out-of-service installation and

commissioning testing. With fast, first-

aid troubleshooting and in-depth, all-layer analysis of

transmission problems the CMA 3000 also supports

signalling analysis of telecom protocols. CMA 3000 delivers

powerful 2 Mbps test and analysis and with options will

support a wide range of telecom systems and technologies,

providing field technicians an easy to use, portable,

compact and flexible test instrument.


15/32w w w. a n r i t s u . c o m

CMA5000a eXtended Transport Analysis (SONET/SDH)

All-in-one SDH/SONET module: 1.5 Mbps to 10 Gbps.

Automatic test report generation in PDF.

Easy-to-interpret user interface and on-line help.

Reduce training and test time through targeted, userfriendly applications.

CMA5000a - XTA, a field portable SDH/SONET tester,

performs Jitter & Wander measurements from 1.5 Mbps up

to 2.5 Gbps. This single, compact solution with an open

architecture provides installation and maintenance

professionals a multitude of measurements, protecting

investment for the future.

CMA5000a Universal Transport Analysis (UTA) Module

Supports 10 GigE and OC-192/STM-64 applications inone single module.

10 GigE LAN-PHY & WAN-PHY.

OC-192/STM-64 analysis down to DS0/E0.

Field exchangeable optical interface via standard XFP.

The Universal Transport Analysis (UTA) module is a new

generation of tester with the ability to support different

transport standards. Today, it is available with 10 GigE and

SONET/SDH application. With its small size, The UTA

module fits in the CMA5000a platform and provides a veryportable solution for field engineer.

CMA5000a Gigabit Ethernet Application

Targeted applications for 10/100/1000M Ethernetinstallation and maintenance.

Dual optical and dual electrical ports.

Easy to use graphical user interface.

RFC 2544 Master/slave operation to ensure ease of use.

Professional and comprehensive report generation.

The GigE Module is a single slot module that can be used in

an SBA, MBA or LBA. The GigE test module enables

customers to test 10/100/1000 Mbps optical and electrical

Ethernet networks. The module provides 2 optical (SFP) and2 electrical (RJ45) ports. The module is specifically designed

to facilitate installation and maintenance of Ethernet

networks. For installation, the module provides RFC2544

test functions including: Throughput, Latency and Frame

Loss tests. For maintenance and troubleshooting the

module provides complete, non-intrusive monitoring

capabilities and presents comprehensive statistics to give

insight into the network's health and status.


16/3216

Optical

| Optical Testing Solutions

Model

MT9083ACCESS Master

MT9090A/MU909011ADrop Cable Fault Locator

MT9090A/MU909020AOptical Channel Analyzer

CMA4500OTDR

MW90010ACoherent OTDR

CMA5000a*Multi-Layer Test Platform

OMETSOTDR Test System

CMA50Power Meter/Light Source/Loss Test

CMA5Light Sources andPower Meters

MS9710COptical Spectrum Analyzer

MP1026B*Bit Master Eye Pattern Analyzer

*See Transport/Datacoms page 14 - 15 for more details.

OTDRStandard

OTDRCons

truction

OTDRFault

locate

OTDRSubm

arine

LossTestSe

t

Spectrum

Wavelength

LowLevel

Med/HighL

evel

OpticalReturnLoss

VisualFault

Locator

VideoInspe

ctionProbe

OpticalSpe

ctrumAnalysis

ChannelDrop

Polarisation

ModeDispersion

ChromaticD

ispersion

OpticalCom

ponentTest

EyePattern

Analysis

OpticalCha

nnelAnalysis

LightSource

OpticalPower

Anritsu is a leading global supplier of optical test and measurement equipment aimed at the

expanding fibre optic telecommunications market. Best known for it's OTDR's, optical

spectrum analyzers and EDFA test systems, Anritsu provides a complete range of products

for installation, commissioning, maintenance and monitoring applications, as well as for

research and development, and production test of complex optical transmission equipment.


17/32w w w. a n r i t s u . c o m

MT9090A/MU909011A Network Master Drop CableFault Locator

Integrated launch fibre provides accurate initial

connector measurement without external devices.

High resolution, widescreen color display that is easy toread indoors or out.

Fixed parameters simplify operation and ensure properset-up just press START.

High resolution and extremely short deadzones ensurethorough short fibre evaluation.

The new MT9090A from Anritsu finally addresses this need

by providing all of the features and performance required

for installation and maintenance of short fibres in a compact,

modular test set. The MT9090A represents an unmatchedlevel of value and ease of use, while not compromising

performance. Data sampling of five centimeters and

deadzones of less than one meter, ensure accurate and

complete fibre evaluation while a simple testing sequence

requires only one key press to initiate allowing anyone to

make error-free measurements.

The MT9090A represents a new era in drop cable and

premise testing. Its ease of use, low price, high-resolution

and size make this the perfect product for last mile

testing.

Network Master MT9090 with its three independent

modules finally addresses the need of providing all

the features and performance required for installation

and maintenance of FTTx access networks. The very

compact battery-powered, easy-to-use Anritsu

Network Master is a comprehensive solution for

10Mb/100Mb & Gigabit Ethernet, Drop Cable Fault

locator and Optical Channel Analyzer.

Modules Available include :

MU909011A Drop Cable Fault Locator

MU909020A Optical Channel Analyzer see p20

MU909060A Gigabit Ethernet Module see p14


18/3218

Optical


MT9083 ACCESS Master OTDR

Instant-on, ready to test in seconds, 8 hours (typ) battery life.

Impressive deadzones under 1 meter.

High resolution and high dynamic range ensuresthorough and complete fibre evaluation.

Integrated power meter and stabilized light sourcestandard.

The ACCESS Master MT9083

represents the latest generation of

mini-OTDRs that deliver full

featured OTDR performance plus

loss test set and quality of service

measurement in a surprisingly small and lightweightpackage. At only 28.4 cm wide x 20 cm tall x 7.7 cm

deep and 2.2 kg (4.8 lbs.), it is field portable, yet rugged

enough to withstand the outside plant environment.

Available in twenty-five configurations featuring up to

four wavelengths each, the MT9083 is perfect for any

application - FTTx to Metro, Access to Core.

CMA4500 Series OTDR

Dedicated testing modes simplify operation and reducetesting times.

Solutions for all network types: Metro, CWDM, ultra-long haul and PON based, FTTP deployments.

Easy to use for any skill level - testing from fault locationto advanced analysis.

The CMA4500 is a field portable, full

featured OTDR developed for

installation, maintenance andtroubleshooting of optical networks.

This dedicated OTDR features a large,

high resolution colour display, touch screen and hard key

user interfaces and several optics options to cover any

testing requirements from single mode to multimode, from

1 m to 250 km. Additional features include dual USB ports,

a 10/100 Ethernet interface and an optional integrated CD-

R/W drive for ease data transfer.

CMA5000a OTDR Module Series

Never obsolete - expandable modular design.

Dedicated testing modes simplify common tasks.

Easy to use testing from fault location to advanced analysis.

The CMA5000a series OTDR

modules simplify installation,

commissioning and trouble-

shooting of core, metro, CWDM

and PON based FTTx optical

networks. They feature a multitude of available

wavelengths for single mode, multimode and hybrid

applications including 850 nm, 1300 nm, 1310 nm,

1383 nm, 1490 nm, 1550 nm, 1625 nm and 1650 nm.

Up to four of these wavelengths can be combined

into a single optical port providing full spectrum fibre

characterisation at the press of a button and

dedicated testing modes simplify operation for any

user profile - novice to expert.

MW90010A Coherent OTDR (C-OTDR)

Measure submarine cables up to 12,000 km long with

10 m resolution.

Unique solution for submarine links fault detection.

Compact & lightweight for easy transportation.

The MW90010A is designed for

detecting faults in ultra-long optical

submarine cables of up to

12,000 km including multiple

repeaters (EDFAs). It is the ideal

solution for evaluating new cables at service deployment

as well as for troubleshooting in-service faults.

Ultra-long optical submarine cables use optical amplifiers

to boost signals. The C-OTDR can measure the

backscatter light through all repeaters by using coherent

detection. As a result, it can display every fault condition,

such as optical loss between repeaters, bending loss,

distances, breaks, etc., on-screen for waveform data

analysis.


19/32w w w. a n r i t s u . c o m

CMA5000a Polarisation Mode Dispersion - PMD

All band testing through a large choice of light sources.

Comply to EIA/TIA FOTP-124 and IEC-61941.

Fast measurement time: less than 8 seconds.

CMA5000a PMD brings high accuracy, fast

measurement time, and highest dynamic range for all

field PMD measurement during installation and

maintenance phase.

OMETS OTDR - Optical Module Embedded TestSystems

Up to 256,000 data points for unparalleled fibre sampling.

High dynamic range and superb resolution.

Ready to install hardware, ready to be accessed software.

The embedded OTDR series

integrates industry leading OTDR

technology into any standard PCI

connector. Our high resolution, high dynamic range

test systems are ideally suited for both short and long

haul testing or monitoring applications. They are

available in several wavelength and dynamic range

combinations to handle virtually any application -single-mode or multimode, "dark" or active fibres. All

of the OMETS are designed for easy hardware

integration with any standard PC featuring a PCI bus

and feature a software developers kit (SDK) to

initialize and operate the modules.


20/3220

Optical


CMA5 Series Power Meters & Light Sources

Pocket-sized and rugged design.

Multiple calibration wavelengths to address all networktypes: DataCom, multimedia, WDM as well as FTTx.

Up to two wavelengths on a single port.

The CMA5 Series Power Meter

and Light Sources are

economical and easy-to-usehandheld meters and sources

without compromising on laser

stability or power accuracy. Featuring a rugged

design, the units withstand the difficult testing

environment of fibre optic cable installation and

maintenance. A two-way powering system with 9 V

battery and optional AC power adaptor ensure the

CMA5 series adapts to any situation.

CMA50 Series Power Meters, Light Sources & LossTest Sets

Up to 4 high power sources per unit out of a single port.

Standard visual fault locator source (OLTS).

Stores up to 100,000 data sets.

Automatic bi-directional testing.

Fast, accurate and easy-to-use, Anritsu's

CMA50 line of Light Sources, Power

Meters and Loss Test Sets are designed

for attenuation and throughput

measurements of fibre optic links. With

up to four stable lasers in the same unit and power

meter calibrated to 26 different wavelengths, CMA50

meets any testing requirement from FTTx PON

networks, to CWDM to long haul telephony links to

multimode LAN, and CATV. CMA50 makes your

measuring experience comprehensive yet simple and

error free with tone detection, auto wavelength

switching mode, fully automatic bi-directional testing

option, Optical Return Loss (ORL) option, Pass/Fail

threshold analysis, large capacity for test results

storage, & RJ45 interface Network Testing option.

MS9710C Optical Spectrum Analyzer

High dynamic range, 70 dB at 1 nm from peak &


21/32w w w. a n r i t s u . c o m

Find more details about the CMA5000a and its modules on

pages 14-15

CMA5000a OTDR/Chromatic Dispersion Application

Accuracy in line with Metropolitan Networks requirement.

CD measurement from one port.

Tri-band 1310/1550/1625 nm OTDR.

Based upon the industry accepted time-of-flight

measurement method (FOTP-168), the system

evaluates Chromatic Dispersion of individual fibre

links, utilising a single fibre for the test at multiple

wavelengths, resulting in an increase in the accuracy

of measurement. Designed to provide optimal test

efficiency, the CMA5000a OTDR/CD facilitates

quicker turn-up of services and reduces the cost of

testing. The combined unit has an auto-test featurethat determines the optimum settings. In addition, the

intuitive setup menu guides the user through a few

minor settings that minimise testing and setup times.

CMA5000a - OSA (Optical Spectrum Analyzer)

Wide spectral range (400 nm) 1250 nm to 1650 nm.

High wavelength and power accuracy in all conditions.

Easy-to-interpret user interface and on-line help.

User-defined configurations for custom CWDM andDWDM testing.

The OSA4XX series combines the

optical performance of a benchtop

OSA with ease of use of a field

unit. These OSA modules for the

CMA5000a are the perfect tools for testing both large

wavelength range CWDM systems and tightly spaced

DWDM systems. Two different modules are availableto meet all test requirements: the OSA 425 and the

OSA 400. Exclusive Channel Select option allows the

user to drop a wavelength for additional analysis for

any modulation rate up to 40 Gbps (OSA 400).


22/3222

RF and Microwave

| RF and Microwave Testing Solutions

MS2687B 9 kHz to 30 GHz 1 Hz to 20 MHz Down to -146.5 dBm*

Frequency counter C/N Adjacent channel power Occupiedfrequency BW Burst average power

Noise power

High C/N Superior distortion Easy-to-use Easy set up auto measurements Supports millimetre applications

Fast data transmission (GPIB 120 kb/sec) High speedmodulation analysis S/W Narrow resolution bandwidth

High speedmodulation analysis S/W Opt power meter measures to 32 GHz Fast data transmission (GPIB 120 kb/sec)

Typical dynamic range of 100 dB Typical phase noise -100 dBc/Hz at

10 kHz offsets to 6 GHz RF anddemodulator measurement capabilities with pass/fail function 13 software options for wireless measurements

Spectrum analyzer30 Hz to 20 MHzSignal analyzer1 Hz to 1 MHz

Worldclass dynamic range 125 MHz analysis bandwidth Excellent level & modulation accuracy up to 6 GHz High speedmodulation analysis Supports GSM/EDGE/EDGE evo, HSPA/HSPA evo, LTE andMobile WiMAX

-163dBm typ to 1 GHz in 1 Hz RBW

-156 dBm to 1 GHz, 1 Hz RBW-139 dBm to 3 GHz, 1 Hz RBW

-156 dBm to 1 GHz, 1 Hz RBW-136 dBm to 18GHz, 1 Hz RBW

1 Hz to 3 MHz

*Option andfrequency dependent

MS2711D 100 kHz to 3 GHz 100 Hz to 1 MHz -135 dBm

MS2717B 9 kHz to 7.1 GHzMS2718B 9 kHz to 13 GHzMS2719B 9 kHz to 20 GHz

MS2721B 9 kHz to 7.1 GHz

MS2723B 9 kHz to 13 GHz

MS2724B 9 kHz to 20 GHz

MS2690A 50 Hz to 6.0 GHz



-153dBm typ to 1 GHz

MS2712E 100 kHz to 4 GHz 10 Hz to 3 MHz -162 dBm (normalizedto 1 Hz)

MS2713E 100 kHz to 6 GHz 10 Hz to 3 MHz -162 dBm (normalizedto 1 Hz)

Dynamic range of >95 dB in 10 Hz RBW DANL of -152 dBm in 10 Hz RBW Phase noise of -100 dBc/Hz max

@ 10 kHz offset at 1 GHz

Model Frequency RBW Noise level Key features

MS2661C 9 kHz to 3 GHz 30 Hz to 3 MHz Down to -130 dBm*

MS2663C 9 kHz to 8.1 GHz 30 Hz to 3 MHz Down to -130 dBm*

MS2665C 9 kHz to 21.2 GHz 30 Hz to 3 MHz Down to -130 dBm*



MS2681A 9 kHz to 3 GHz 1 Hz to 20 MHz Down to -148.3 dBm*

MS2683A 9 kHz to 7.8GHz 1 Hz to 20 MHz Down to -146.5 dBm*

Down to -155 dBm*

Spectrum Analyzers

Superior performance. Advanced capabilities. Affordable pricing. The Anritsu family of spectrumanalyzers delivers high frequency / level accuracies and a broad set of smart, intuitive features -

including models with built-in one button test.

Take advantage of a large selection ofoptions to handle a wider range ofapplications at a reasonable cost.


23/32w w w. a n r i t s u . c o m

MS272XB Series Handheld Spectrum Analyzer -Spectrum MasterTM

Three models offering 9 kHz to 7.1, 13, and 20 GHz fre-quency ranges.

Measurement and test set-up storage only limited byattached memory size.

Save over 1000 measurements internally.

Lightweight at only 3 kg (typical).

3G signal measurement options.

The Spectrum Master series

provides the ultimate measurement

flexibility in a light weight, rugged

package for field environments and

mobile applications. With frequenciesranging from 9 kHz to 20 GHz, the Spectrum Master is ideal

for such applications as identifying sources of interference,

measuring field strength of cellular, satellite and military land

mobile signals, field analysis of 802.11a/b/g wireless LAN

signals and measurement of RF output from circuits, devices

and instruments.

MS271XE Series Handheld Spectrum Analyzer -Spectrum MasterTM

Two models offering 100 kHz to 4 GHz and 6 GHz.

Intuitive menu-driven touchscreen user interface

2-port transmission measurements

Channer Scanner

Three-hour battery life

Whether you are performing complex

interference analyses or assessing signal

quality, the MS2712E Spectrum Master

delivers the ease of use, rich functionality,

and best-in-class price/performance youve come to expect

from Anritsu. Designed to handle the most punishing field

conditions, the MS2712E allows you to monitor, locate,

identify, and analyze a broad range of cellular, 2G/3G/4G,

land mobile radio, Wi-Fi, and broadcast signals. With a richarray of configuration options, the multifunctional MS2712E

eliminates the need for you to learn and carry multiple

instruments when locating and identifying signals over wide

frequency ranges.

MS268XB Series High Performance RF &Microwave Spectrum Analyzer

3 models covering from 9 kHz to 3 / 7.8 and 30 GHz.

Optional resolution bandwidth from 1 Hz up to 20 MHz.


24/3224 | RF and Microwave Testing Solutions

MS4640A Series VectorStar Vector Network Analyzer

Broadest frequency range from 70 kHz to 110 GHz.

Fastest swept speed available


25/32w w w. a n r i t s u . c o m

Features Benefits Applications

Obtain the most thorough andaccurate broadband

device characterization. Eliminate time consumingconcatenation process

across the RF, microwave/mm-wave bands.

Decrease test instrument expenses by eliminating the needfor a 2ndRF VNA.

Reduce the risk of DC extrapolation errors in your device modelling.

Increase manufacturingrevenueby increasingthroughput.

Quickly andeasily spot the most hardto findfailuresandreduce the risk of shippingdefective products.

Broadest frequency span

from a single coaxial testport covering70 kHz to70 GHz in a singleinstrument and70 kHzto 110 GHz in thebroadbandconfiguration.

Fastest swept synthesizedmeasurement speed


26/3226

RF and Microwave

Power Meters & Sensors

Anritsu power meters provide accurate measurements for the fullrange of communications, wireless and aerospace applications.

Power Meter Frequency VBW Dynamic Range (dBm) Channels

ML2437A Power MeterML2438A Power Meter

ML2487B WidebandPower MeterML2488B WidebandPower Meter

ML2495A WidebandPower Meter

ML2496A WidebandPower Meter

100 kHz to 65 GHzSensor dependent

50 MHz to 18GHzSensor dependent

100 kHz to 65 GHz

Sensor dependent

100 kHz

20 kHz

65 MHz

-70 to +20 dBmSensor dependent

-60 to +20 dBmSensor dependent

-70 to +20 dBm

Sensor dependent

12

12

1

2

Worldclass dynamic range 125 MHz analysis bandwidth Excellent level & modulation accuracy

up to 6 GHz High speedmodulation analysis Supports GSM/EDGE/EDGE evo, HSPA/ HSPA evo, LTE andMobile WiMAX




Spectrum analyzer30 Hz to 20 MHzSignal analyzer1 Hz to 1 MHz

Model Frequency RBW Noise level Key features

Down to -155 dBm(option andfrequencydependent)

Signal Analyzers

Technicians looking for exceptional engineering insight for advanced RF and communications products need to

look no further. Anritsu Signal Analyzers offer cost-effective solutions for 3G and Mobile WiMAX, LTE

measurements, industry best DANL, dynamic range and a unique built-in vector signal generator.

The preferred choice of service providers, networoperators and contractors worldwide.


Microwave Power Sensors

These power sensors are designed to provide accurate average power

measurements from 10 MHz to 18 GHz over 60 dB of dynamic range. The

sensors have internal and external triggering capability that facilitates

individual slot power measurements of TDMA waveforms as well as burst

power measurements of periodic and non-periodic waveforms. The

sensors are compatible with PC and can be controlled via PowerXpertTM,

a free of charge software application. These sensors are also compatiblewith Spectrum Master, BTS Master, VNA Master and MS271xB Economy

Spectrum Analyzers (option 19 required in each of these instruments).

Visit www.anritsu.com for full details on the complete range ofpower sensors.


27/32

Model Frequency Range Key Features Key Applications

MG3641A SynthesizedSignal Generator

MG3642A SynthesizedSignal Generator

MG3690B SeriesRF/MicrowaveSignal Generator

MG37020A Fast SwitchingMicrowave SignalGenerator

MG3700AVector Signal Generator

Interference testingof radio receivers Various local andreference signal sources Calibration signal sources

Microwave communications Aerospace/defence Applications signal simulation ManufacturingATE systems

Digital modulation of signals for all major wireless communication systems

125 kHz to 1040 MHz

Interference testingof radio receivers Various local andreference signal sources

Calibration signal sources

Microwave communications Aerospace/defence Applications signal simulation ManufacturingATE systems

0.01 Hz resolution -100 dBc non-harmonics spurious

0.01 Hz resolution -100 dBc non-harmonics spurious

High-performance High-output power Ultra-low phase noise Analog/Pulse modulation

160 MHz arbitrary waveform generator yields high level accuracy andlarge

capacity basebandmemory

Fast switchingspeed High-output power Low phase noise Pulse modulation

125 kHz to 2080 MHz

0.1 Hz to 67 GHz/325 GHzandgreater

10 MHz to 20 GHz

250 kHz to 3 GHz(6 GHz option)

Synthesized Signal Generators

Whether you test in the field, fixed or mobile satellite communications or defence industries, Anritsu provides the

best synthesized signal generator solutions. With high-signal purity, low noise and an excellent frequency stability

our signal generators are a fundamental measuring instrument for your lab or manufacturing site.

MG37020A Fast Switching uWave Signal Generator

0.001 Hz Frequency resolution standard.

Standard output power: +17 dBm at 20 GHz.

High output power option: +23 dBm at 20 GHz.

The MG37020A Fast Switching Microwave Signal

Generator covers both RF and microwave frequencies from

10 MHz to 20 GHz. The MG37020A with 100 sec per point

typical switching speed is an ideal signal source for RF and

microwave applications requiring frequency agility, including

data intensive applications such as antenna testing and

satellite payload testing, high throughput applications such

as RFIC and MMIC testing, and defence applicationsincluding radar and EW receiver testing.

MG3690B Synthesised Signal Generator

Broad frequency coverage in a single output.

Ultra-low SSB phase noise option.

Standard output power of +17 dBm at 20 GHz.

MG3690B signal generators provide precise, convenient

simulation of pulsed signals in civilian and military radar

applications. The unit provides narrower levelled pulses,

increased resolution with an internal pulse generator, and

higher frequency internal waveform generators to simulate

modulated signals.

w w w. a n r i t s u . c o m

Anritsu provides the best synthesizedsignal generator solutions.


28/3228

RF and Microwave


Site Master

2 MHz to 1600 MHz

Return loss Cable loss SWR Distance-to-fault

Return loss SWR Cable loss Distance-to-fault Adjacent Channel Power Ratio P25 Transmitter andcoverage measurements (S412D only) Transmission measurement Channel power

Return loss 1-port cable loss Distance-to-fault

2-port cable loss Coax andwaveguide VSWR

2 MHz to 4 GHz

2 MHz to 6 GHz

2 MHz to 10.5 GHz

2 MHz to 20 GHz

2 MHz to 6 GHz

2 MHz to 4 GHz

Cable & AntennaAnalyzer

Frequency Range

SpectrumAnalyzer

100 kHz to 4 GHz

100 kHz to 6 GHz

N/A

N/A

N/A

N/A

N/A

MeasurementsSite Master

S311D Cable andAntennaAnalyzer

S331E Cable andAntennaAnalyzer




2 MHz to 1600 MHz 100 kHz to 1.6 GHzS412D Cable, Antenna, Spectrum,Interference, P25/iDEN ModulationAnalyzer

S810D BroadbandMicrowaveTransmission Line Analyzer

S820D BroadbandMicrowaveTransmission Line Analyzer

As powerful as it is easy to use, more field technicians choose Site Master than any other handheld analyzer. And

for applications as VHF, broadcasting, paging, Land Mobile Radio, cellular, GPS, PCS/GSM, 2.5G, 3G, 4G, WLANand WiMAX, Site Master delivers accurate, repeatable measurements.

Delivering benchtop performance in ahandheld instrument.

Optical Distance to Fault Module

1550 nm, 30 dB optical dynamic range, 10 cm eventresolution.

Easy to upgrade existing Site Master systems and turnthem into high accuracy fibre analyzers.

The ODTF-1 module can be used with

Anritsu's handheld cable & antennaanalyzers to make high resolution Optical

DTF (Distance-To-Fault) measurements

over fibre optic cables. The ODTF-1

module is primarily intended for field use by technicians and

engineers responsible for the deployment and maintenance

of remote radio heads (RRH). As the majority of the next

generation 3G and 4G networks utilize remote radio heads

and fibre links between the radio and main unit, contractors

will develop a need for sweeping both RF and fibre.


29/32w w w. a n r i t s u . c o m

Base Station Analyzers

Base Station Analyzer Frequency Measurements

400 MHz to 4 GHz(Built-in cable andantenna analyzer)

150 kHz to 7.1 GHz(Built-in spectrum analyzer)

150 MHz to 7.1 GHz(Built-in power meter)

2 MHz to 4 GHz(Built-in cable andantenna analyzer)

100 kHz to 4 GHz(Built-in spectrum analyzer)

100 kHz to 4.0 GHz(Built-in power meter)

Spectrum analysis Interference analysis

Cable loss Mobile WiMAX (802.16-2005) FixedWiMAX ( 802.16-2004) W-CDMA/HSDPA code domain power

Return loss Distance-to-fault Interference analyzer Transmitter measurements (W-CDMA/HSDPA, cdmaOne,

CDMA2000, 1xRTT, CDMA2000, 1xEV-DO, WiMAX, GSM, iDEN)

MT8212E Cell Master

MT8221B BTS Master

Channel scanner Return loss

GSM/EDGE channel power Distance-to-fault GPS receiver CDMA/EVDO measurements Vector Signal Generator

Cable loss Channel scanner GPS receiver T1/E1/T3 analyzer Transmission analyzer for

2-port devices

MT8221B Handheld Base Station Analyzer - BTSMasterTM

Increase system up-time with 1- and 2-port cable andantenna analysis.

Lab-grade spectrum analysis in a handheld package.

Demodulate and display W-CDMA/HSDPA signals.

The MT8221B BTS Master is a

lightweight, handheld base station

analyzer that provides wireless field

technicians with a single test solution

for installing, deploying, and

maintaining today's complex wireless networks.

Weighing less than 5 kg, the MT8221B BTS Master

comprises a complete set of tools that includes a cable and

antenna analyzer, spectrum analyzer, power meter, W-

CDMA/HSDPA, GSM/GPRS/EDGE and Fixed WiMAX RF

and demodulation, W-CDMA/HSDPA Over the Air (OTA),

interference analyzer, Bit Error Rate Tester (BERT), channel

scanner, and power monitor, and a Vector Signal Generator

for receiver testing. Eliminating the need for technicians to

carry several instruments in the field.

MT8212E Base Station, Cable & Antenna Analyzer -Cell MasterTM

2-port transmission measurement: High/low power

Sweep speed: 1 msec/data point, typical

Dynamic range: > 95 dB in 1 Hz RBW DANL: -152 dBm in 10 Hz RBW

Phase noise: -100 dBc/Hz max @ 10 kHz offset at 1 GHz

The MT8212E is a handheld multi-

function base station analyzer that

combines all the tools required to

deploy, maintain and troubleshoot

wireless base stations into a lightweight, battery-operated

package. Integrating all this functionality in a single

instrument eliminates the need to buy separate equipment

for new and legacy networks, which increases efficiencies

and simplifies data acquisition. Cell Master features signal

analyzer options for 2G and 3G cellular networks, and

WiMAX fixed and mobile networks.

Quickly and easily perform allmeasurements for wireless network

deployment, installation and maintenance.


30/3230

Service and Support

| Service and Support

EMEA Service and Support

As well as a local support network, Anritsu has invested in state-of-the art calibration facilities and European centres-of-excellence. These provide calibration and repair facilities across the product range; from mobile radio through RF and

Microwave, to digital and optical technology.

Our support network is constantly developing to meet customer demands. All calibration is backed up by traceability to national

and international standards and is ISO compliant.

Repairs

a.sure - Anritsu understands that the decisions made when purchasing test and measurement

equipment are not taken lightly. Your investment in equipment is mission and business critical,

whether you are performing essential tasks across research and development, conformance

testing, manufacturing, installation and maintenance or service assurance.

Take advantage of a.sures Product Support Package at special, low cost prices, available at time of equipment purchase. You

can rest easy that your product will have the highest possible availability and usage levels with true cost efficiency.

What features does a-sure give you?

Three years warranty from Purchase on your Anritsu product.

Priority web-based customer support (registration code supplied with your new equipment).

A 15% discount on yearly calibrations carried out at an Anritsu Service Centre.

Flexible Calibration and Maintenance Contracts - With the Anritsu range of flexible contracts, we are confident that there is

something for everyone. The modular concept means you can add options together to create a calibration and/or maintenancesolution which is unique to you and your company's needs.

Calibration

There are four levels of calibration service available, providing a choice to meet the varying levels of customer need.

Bronze - The Bronze package provides calibration: A check of the instrument accuracy against a set of Anritsu pre-determined

key parameters derived from the Manufacturer's Published Performance Specification.

Silver - The Silver package builds on the Bronze package. With calibration in accordance with the Full Manufacturer's Published

Performance Specification. Results data sheets including the addition of uncertainties where available are provided.

Gold - The Gold package extends the Silver package to include the detailed adjustment of the instrument. It includes a

Certificate of Calibration with calibration results against Full Manufacturer's Published Performance Specification parameters.

This is in the form of a results data sheet, including both 'before and after' adjustment and repair values, with uncertainties being

provided where available.

Platinum - The Platinum package includes checking by comparison with a standard and test equipment taking place under

ISO/CEI 17025 accredited procedures. The package builds on the Gold package, providing a certificate of calibration that

includes uncertainties, and 'before and after' adjustment results (where applicable), and a traceability tree (where applicable).


31/32w w w. a n r i t s u . c o m

On-Site Calibrations

If you can't afford to be without your equipment for any length of time, even for calibration, don't despair. By travelling to your

site of operations and calibrating your equipment there and then, we can ensure that down time is kept to an absolute minimum.

EMEA Training

Anritsu provides training services to help customers gain a competitive advantage and stay up to date in today's world of rapidly

changing technology. Anritsu has a dedicated team of professionals, each an expert in their individual field who are able to offer

training across the EMEA region.

We understand that no two customers are the same, so in addition to our well established generic training courses, we can offer

specific bespoke product training tailored to your personal requirements.

Courses currently available include:

Training Course Content Instrument Duration

CertifiedSite Master LineSweeping

HandheldSpectrum Analyzer& Interference (basic)

HandheldSpectrum Analyzer& Interference (advanced)

PDH, SDH, EthernetMeasurements

Optical spectrum analysis,WDM, DWDM

Optical reflectometry, opticalpower measurement

A two day instructor ledtrainingcourse that focuses on RF line sweeptheory andtechnology return loss, cable loss, DTF, 2 ports basics.

Provides an introduction to spectrum analysis. Overview of theinstrument, interference types definitions andbasic measurements.

A more indepth look at spectrum analysis analog/digital modulationmeasurements. Interference types definitions andadvancedmeasurements.

PDH, SDH, Ethernet networks overview andmeasurements.

WDM andDWDM measurements. Optical amplifiers.

Fibre characteristics, length, attenuation, events.

Sxxxx; MS20xx,MT82xx

Sxxxx; MS20xx,MT82xx, MS27xx

Sxxxx; MS20xx,MT82xx, MS27xx

CMA3k

CMA 5k,MS9710C

OTDRs

2 days

1 days

2 days

1 days

1 days

1 days

Visit www.eu.anritsu.com/training for the latest information onavailable training courses.


32/32

Anri tsu Corporation5-1-1 Onna, Atsugi-shi, Kanagawa, 243-8555 JapanPhone: +81-46-223-1111Fax: +81-46-296-1238

U.S.A.

Anri tsu Company1155 East Collins Blvd., Suite 100, Richardson,TX 75081, U.S.A.Toll Free: 1-800- 267-4878Phone: +1-972-644-1777Fax: +1-972-671-1877

CanadaAnri tsu El ectronics Ltd.700 Silver Seven Road, Suite 120, Kanata,Ontario K2V 1C3, CanadaPhone: +1-613-591-2003Fax: +1-613-591-1006

BrazilAnri tsu El etrnica Ltda.Praca Amadeu Amaral, 27 - 1 Andar01327-010-Paraiso-So Paulo-BrazilPhone: +55-11-3283-2511Fax: +55-11-3288-6940

Mexico

Anri tsu Company, S.A. de C.V.Av. Ejrcito Nacional No. 579 P iso 9, Co l. Granad a11520 Mxico, D.F., MxicoPhone: +52-55-1101-2370Fax: +52-55-5254-3147

U.K.Anri tsu EMEA Ltd.200 Capability Green, Luton, Bedfordshire, LU1 3LU, U.K.Phone: +44-1582-433200Fax: +44-1582-731303

FranceAnri tsu S.A .16/18 avenue du Qubec-SILIC 72091961 COURTABOEUF CEDEX, FrancePhone: +33-1-60-92-15-50Fax: +33-1-64-46-10-65

GermanyAnri tsu GmbHNemetschek Haus, Konrad-Zuse-Platz 181829 Mnchen, GermanyPhone: +49-89-442308-0Fax: +49-89-442308-55

ItalyAnri tsu S.p .A.Via Elio Vittorini 129, 00144 Roma, ItalyPhone: +39-6-509- 9711Fax: +39-6-502-2425

Sweden

Anri tsu ABBorgafjordsgatan 13, 164 40 KISTA, SwedenPhone: +46-8-534-707-00Fax: +46-8-534-707-30

FinlandAnri tsu ABTeknobulevardi 3-5, FI-01530 VANTAA, FinlandPhone: +358-20-741-8100Fax: +358-20-741-8111

DenmarkAn ri ts u A /SKirkebjerg All 90, DK-2605 Brndby, DenmarkPhone: +45-72112200Fax: +45-72112210

SpainAn ri ts u EMEA Lt d.Oficina de Representacin en EspaaEdificio Veganova

Avda de la Vega , n 1 (edf 8 , pl 1, o f 8)28108 ALCOBENDAS - Madrid, SpainPhone: +34-914905761Fax: +34-914905762

RussiaAn ri ts u EMEA Lt d.Representation Office in Russ iaTverskaya str. 16/2, bld. 1, 7th floor.Russia, 125009, MoscowPhone: +7-495-363-1694Fax: +7-495-935-8962

United Arab EmiratesAnri tsu EMEA Ltd.Dubai Liaison OfficeP O Box 500413 - Dubai Internet City

Al Thuraya Build ing, Tower 1, Suit 701, 7th FloorDubai, United Arab EmiratesPhone: +971-4-3670352Fax: +971-4-3688460

SingaporeAnri tsu Pte. Ltd.60 Alexandra Terrace, #02-08, The Comtech (Lobby A)Singapore 118502Phone: +65-6282-2400Fax: +65-6282-2533

IndiaAnri tsu Pte. Ltd.

India Branch Office3rd Floor, Shri Lakshminarayan Niwas, #2726, 80 ft Road,HAL 3rd Stage, Bangalore - 560 075, IndiaPhone: +91-80-4058-1300Fax: +91-80-4058-1301

P.R. China (Hong Kong)Anri tsu Company Ltd.Units 4 & 5, 28th Floor, Greenfield Tower, Concordia Plaza,No. 1 Science Museum Road, Tsim Sha Tsui East,Kowloon, Hong KongPhone: +852-2301-4980Fax: +852-2301-3545

P.R. China (Beijing)Anri tsu Company Ltd.Beijing Representative OfficeRoom 2008, Beijing Fortune Building,No. 5, Dong-San-Huan Bei Road,Chao-Yang District, Beijing 100004, P.R. ChinaPhone: +86-10-6590-9230Fax: +86-10-6590-9235

KoreaAnri tsu Corporation, Ltd.8F Hyunjuk Building, 832-41, Yeoksam Dong,Kangnam-ku, Seoul, 135-080, KoreaPhone: +82-2-553-6603Fax: +82-2-553-6604

AustraliaAnri tsu Pt y. Ltd.Unit 21/270 Ferntree Gully Road, Notting Hill,Victoria 3168, AustraliaPhone: +61-3-9558-8177Fax: +61-3-9558-8255

TaiwanAnri tsu Company Inc.7F, No. 316, Sec. 1, Neihu Rd., Taipei 114, Taiwan

Phone: +886-2- 8751-1816Fax: +886-2- 8751-1817

Specifications are subject to change without notice

Rev 1 06Anritsu All trademarks are registeredtrademarks of their respective companies.

Data subject to change without notice. For the latest specifications andproducts visit www.anritsu.com

(ES) Equipements Scientifiques SA - Dpartement Tests Energie Mesures - 127 rue de Buzenval BP 26 - 92380 GarchesTl 01 47 95 99 45 Fax 01 47 01 16 22 e mail: tem@es france com Site Web: www es france com

Documents

Anritsu Shortform Introduction Catalog