Annex to Engineering 003-Civil Structural Design Criteria on Shore

7/25/2019 Annex to Engineering 003-Civil Structural Design Criteria on Shore

1/84

Engineering 0003 Page 1 of 84 Master Language: EnglishVersion: 1.0

Regulation Class Document Class

Standard Annex

Regulation Title

Annex to Civil Structural Design Criteria On Shore Doc. No.Engineering 0003

Topic

Non exhaustive Summary of Regulations valid for Structural Engineering which shall bebase for Engineering contractor.

Objective

The Standard includes the basis requirements of input data for structural engineering.Whereas the Annext is a summary of valid local regulations.

Target Group

All engineers related to civil and structural engineering, involved in projects as well asoperations and maintenance in the respective country.Scope of Effectiveness

OMV AG and all companies that are fully consolidated. In companies not fully consolidated,where OMV AG has a controlling interest. All stock corporations are excluded with the resultthat these regulations have to be separately enforced in these entities

Editor: GTM-T Wolfgang Desch 28.03.2013Org. Unit First- Last Name Signature Date

Regulation Approver 1: GTM-T Christian Forberich 02.04.2013Org. Unit First- Last Name Signature Date

Regulation Approver 2: GT-M Rob Laane 02.04.2013Org. Unit First- Last Name Signature Date

As approved by the Executive Board of: dd.mm.yyyyDate

Effective as of: dd.mm.yyyyDate

Please note that Regulations are amended from time to time. Only the version currently published on the REAL IT Platform isthe valid version.


2/84


Index of content

1. Introduction & Intended Purpose of Regulation ................................................ 4 2. Regulations as per country ................................................................................. 5 2.1. TUNISIA .............................................................................................................. 5 2.1.1. Basis of structural Design .............................................................................. 5 2.1.2. Actions on structures ..................................................................................... 5

2.1.3. Design of concrete structures ........................................................................ 6 2.1.4. Design of steel structures .............................................................................. 6 2.1.5. Geotechnical design ....................................................................................... 6 2.1.6. Design of structures for earthquake resistance .......................................... 11 2.1.7. Crane loads ................................................................................................... 12 2.1.8. Fire Protection (passive) .............................................................................. 12 2.1.9. Machine Foundations ................................................................................... 12 2.1.10. Coating/corrosion Protection ....................................................................... 12 2.1.11. Material Standards ....................................................................................... 12 2.1.12. Design of Masonry Structures ..................................................................... 29 2.2. ROMANIA ......................................................................................................... 31

2.2.1.

Basis of structural Design ............................................................................ 31

2.2.2. Actions on structures ................................................................................... 31 2.2.3. Design of concrete structures ...................................................................... 33 2.2.4. Design of steel structures ............................................................................ 37 2.2.5. Geotechnical design ..................................................................................... 44 2.2.6. Design of structures for earthquake resistance .......................................... 48 2.2.7. Crane loads ................................................................................................... 50 2.2.8. Fire Protection (passive) .............................................................................. 50 2.2.9. Machine Foundations ................................................................................... 50 2.2.10. Coating/corrosion Protection ....................................................................... 50 2.2.11. Material Standards ....................................................................................... 50 2.2.12. Composite Structures .................................................................................. 51 2.2.13. To be added .................................................................................................. 52 2.2.14. Executia Receptia - General ......................................................................... 53 2.3. TURKEY ............................................................................................................ 54 2.3.1. Basis of structural Design ............................................................................ 54 2.3.2. Actions on structures ................................................................................... 54 2.3.3. Design of concrete structures ...................................................................... 54 2.3.4. Design of steel structures ............................................................................ 54 2.3.5. Geotechnical design ..................................................................................... 54 2.3.6. Design of structures for earthquake resistance .......................................... 55 2.3.7. Crane loads ................................................................................................... 55 2.3.8. Fire Protection (passive) .............................................................................. 55

2.3.9. Machine Foundations ................................................................................... 55 2.3.10. Coating/corrosion Protection ....................................................................... 55 2.3.11. Material Standards ....................................................................................... 56 2.4. GERMANY ........................................................................................................ 58 2.5. AUSTRIA ........................................................................................................... 59 2.5.1. Eurocode 1 .................................................................................................... 59 2.5.2. Eurocode 2 .................................................................................................... 63 2.5.3. Eurocode 3 .................................................................................................... 64 2.5.4. Eurocode 4 .................................................................................................... 70 2.5.5. Eurocode 5 Timber Construction Not used within OMV ...................... 72 2.5.6. Eurocode 6 .................................................................................................... 72

2.5.7. Eurocode 7 .................................................................................................... 73


3/84


2.5.8. Eurocode 8 .................................................................................................... 74 2.5.9. Eurocode 9 .................................................................................................... 76 2.5.10. Divers Norms Concrete design .................................................................... 76 2.5.11. Geotechnics and Soil Mechanics................................................................. 78 2.5.12. Passive Fire Protection ................................................................................. 79 2.5.13. Anchoring and dowelling ............................................................................. 80 2.5.14. General .......................................................................................................... 81 2.6. PAKISTAN ........................................................................................................ 82 3. Internal Reference List ....................................................................................... 83 4. External Reference List ...................................................................................... 83 5. Obsolete Regulations ........................................................................................ 83 6. Certification Standards ...................................................................................... 83 7. Terms & Abbreviations ..................................................................................... 83 8. Keywords / Search Criteria ................................................................................ 83 9. Annexes ............................................................................................................. 84 10. Amendments from previous versions .............................................................. 84 11. Transitory provisions ......................................................................................... 84


4/84


1. Introduction & Intended Purpose of Regulation

The Document is an Annex to the Civil Structural Desing Criteria On Shore DocNo. Engineering 0003.This Annex is a summary of Local Regulations which are to be used duringEngineering for Civil Works in the countries OMV is represented and involved in

Project execution.The lists are not exhaustive but a useful working basis.A regular update is necessary!


5/84


2. Regulations as per country

2.1. TUNISIA

List based upon Catalogue 2007 des Normes Tunisiennes

2.1.1. Basis of structural Design

NT 30.172(2004) Rgles bael 91, revisees 99- rgles techniques deconception et de calcul desouvrages et constructionsen bton arm suivant lamthode des tats limites

Rule 91, revised 99 - rulesand design techniquesdesign of structures andconstructions in reinforcedconcrete according to themethod of limit states

NT 30.174(2004)(ISO 2103-1986)

Charges dues l'exploitation dans lesbtiments d'habitation etpublics

Operational loads onpublic and residentialbuildings

NT 30.175(2004)(ISO 2394-1998)

Principes gnraux de lafiabilit des constructions

General principles ofreliability of constructions

NT 30.176(2004)(ISO 3010-2001)

Bases du calcul desconstructions actionssismiques sur lesstructures

Basis of the design ofstructures with seismicactions

NT 30.177(2004)(ISO 3898-1997)

Bases du calcul desconstructions - notations symboles gnraux

Basis for design ofstructures - notations -general symbols

NT 30.178(2004)(ISO 4355-1998) Bases du calcul desconstructionsdtermination de la chargede neige sur les toitures

Basis of the design ofstructures - determinationof the snow load on theroof

NT 30.179(2004)(ISO 9194-1987)

Bases de calculs desconstructions - actionsdues au poids propre desstructures, des lmentsnon structuraux et desmatriaux entreposes -masses volumiques

Basis of design ofstructures - actions due tothe self-weight, of non-structural elements andstored materials

NT 30.182(2004)(EN 1990-2003) Bases de calcul desstructures Basis of design ofstructures

2.1.2. Actions on structures

NT 30.173(2004)(EN 1991-1-1-2003)

Actions sur les structures -partie 1-1 : actionsgnrales - poidsvolumiques, poids propres,charges d'exploitation desbtiments

Actions on structures part 1-1: General actions -densities, self-weight,imposed loads forbuildings


6/84


NT 30.184(2004)(NF ENV 1991/2/3-1997)

Bases de calcul et actionssur les structures - partie 2-3 :actions sur les structures- charges de neige

Basis of design and actionson structures - part 2 - 3:actions on structures -snow loads

NT 30.185(2004)(NF ENV 1991/2/4-2000)

Bases de calcul et actionssur les structures - partie 2-4 : actions sur les

structures - actions du vent

Basis of design and actionson structures - part 2 - 4:wind actions on the

structuresNT 30.186(2004)(NF ENV 1991/3-1997)

Bases de calcul et actionssur les structures - partie 3: charges sur les pontsdues au trafic

Basis of design and actionson structures - part 3: loadson bridges due to traffic

2.1.3. Design of concrete structures

NT 30.187(2004)(NF ENV 1992/1/2-2001)

Calcul des structures enbton - partie 1-2 : rglesgnrales : calcul ducomportement au feu

Design of concretestructures - part 1-2:general rules: calculation ofthe fire resistance

NT 30.188(2004)(NF ENV 1992/1/3-1997)

Calcul des structures enbton - partie 1-3 : rglesgnrales - lments etstructures en btonprfabriqus

Design of concretestructures - part 1-3:general - elements andrules for prefabricatedconcrete structures

NT 30.189(2004)(NF ENV 1992/1/4-1997)

Calcul des structures enbton - partie 1-4 : rglesgnrales - bton degranulats lgers structureferme

Design of concretestructures - part 1-4:general rules lightweightaggregate concrete withclosed structure

NT 30.190(2004)(NF ENV 1992/1/5-1997) Calcul des structures enbton - partie 1-5 : rglesgnrales - structuresprcontraintes pararmatures extrieures ounon adhrentes

Calculation of concretestructures - part 1-5:general structures withunbonded and externalprestressing tendons

NT 30.191(2004)(NF ENV 1992/1/6-1997)

Calcul des structures enbton - partie 1-6 : rglesgnrales - structures enbton non arm

Design of concretestructures - part 1-6:general plain concretestructures

2.1.4. Design of steel structures

Not Specified Utilize current international standard

2.1.5. Geotechnical design

NT 30.99(2003) Sols - reconnaissance etessais - glossairegeotechnique - dfinitions -notations - symboles

Soil - and testing -geotechnical - definitions -ratings - symbols glossary

NT 30.100(2003) Sols - reconnaissance et Soil - and testing -


7/84


essais - description -identification -dnomination des sols -terminologie - lments declassification

description - identification -description of soils -terminology - elements ofclassification

NT 30.101(2003) Sols - reconnaissance etessais - mthode simplifie

D'identification de lafraction 0/50 mm d'unmatriau grenu

Soil - and testing -simplified method

Identification of the fraction0/50 mm material godara

NT 30.102(2003) Sols - reconnaissance etessais - identificationGranulomtrique -mthode de tamisage parvoie humide

Soil - and testing -identificationSize - by wet sievingmethod

NT 30.103(2003) Sols - reconnaissance etessais - dtermination de lateneur pondrale enmatires organiques d'unmatriau - mthode parcalcination

Soil - and testing -determination of weight inorganic material to amaterial - ashing method

NT 30.104(2003) Sols - reconnaissance etessais - dtermination de lateneur en carbonate -mthode du calcimtre

Soil - and testing -determination of carbonate- method of the calcimetre

NT 30.105(2003) Sols - reconnaissance etessais - dtermination de lateneur en eau pondraledes matriaux - partie 1 :mthode de la dessiccationau four micro-ondes

Soil - and testing -determination of theweight of the materialmoisture content - part 1:method of the microwavedrying

NT 30.106(2003) Sols - reconnaissance etessais - dtermination de lateneur en eau pondraledes matriaux - partie 2 :mthode de la plaquechauffante ou panneauxrayonnants

Soil - and testing -determination of theweight of the materialmoisture content--part 2:method of the heatingplate or radiant panels

NT 30.107(2003) Sols - reconnaissance etessais - dtermination de lateneur en eau pondraledes matriaux - mthodepar tuvage

Soil - and testing -determination of watercontent weight of thematerials - drying method

NT 30.108(2003) Sols - reconnaissance etessais - dtermination deslimites d'atterberg - limitesde liquidite la coupelle -limite de plasticite aurouleau

Soil - and testing -determination of atterberglimits - limits liquidity tothe cup - limit of plasticityroller


8/84


NT 30.109(2003) Sols - reconnaissance etessais - dtermination deslimites d'atterberg - partie1 : limites de liquidite -mthode du cone depntration

Soil - and testing -determination of atterberglimits--part 1: limits ofliquidity - the conepenetration method

NT 30.110(2003) Sols - reconnaissance et

essais - dtermination de lamasse volumique des solsen laboratoire - mthodesde la trousse coupante, dumoule et de l'immersiondans l'eau

Soil - and testing -

determination of bulkdensity of soils inlaboratory - cutting kit,mold, and water immersionmethods

NT 30.111(2003) Sols - reconnaissance etessais - dtermination de lamasse volumique desparticules solides des sols -mthode du pycnomtre eau

Soil - and testing -determination of bulkdensity of soils inlaboratory - cutting kit,mold, and water immersionmethods

NT 30.112(2003) Sols - reconnaissance etessais - dtermination de lateneur pondrale enmatires organiques d'unsol - mthode chimique

Soil - and testing -determination of weightorganic of a soil - chemicalmethod

NT 30.113(2003) Sols - reconnaissance etessais - analysegranulomtrique - mthodepar tamisage sec aprslavage

Soil - and testing - analysis- method by sifting dryafter washing

NT 30.114(2003) Sols - reconnaissance etessais - analysegranulomtrique des sols -mthode par sidimentation

Soil - and testing - particlesize analysis of soils -sidimentation method

NT 30.115(2003) Sols - reconnaissance etessais - dtermination del'tat de decomposition(humification) des solsorganiques - essai von post

Soil - and testing -determination of the stateof decomposition(humification) of organicsoil - test von post

NT 30.116(2003) Sols - reconnaissance etessais - dtermination desmasses volumiquesminimale et maximale dessols non cohrents

Soil - and testing -determination of densitiesminimum and maximum ofthe non-cohesive soils

NT 30.117(2003) Sols - reconnaissance etessais - essai dedessiccation - partie 1 :dterminationconventionnelle de la limitede retrait sur le Passant 400 um d'un matriau

Soil - and testing - test ofdrying - part 1:determination of thewithdrawal limit on theturning to 400 um of amaterial


9/84


NT 30.118(2003) Sols - reconnaissance etessais - essai dedessiccation - partie 2 :dtermination effective dela limite de retrait sur unprlvement non remanie

Soil - and testing - test ofdrying - part 2: actualdetermination of the limitof withdrawal on a levy notoverhaul


essais - masse volumiquesche d'un lment deroche - mthode par peseehydrostatique

Soil - and testing - an

element of rock - methodby hydrostatic weighingdry density

NT 30.120(2003) Sols - reconnaissance etessais - coefficient defragmentabilite desmatriaux rocheux

Soil - and testing -coefficient ofFragmentability of rockmaterials

NT 30.121(2003) Sols - reconnaissance etessais - coefficient de

dgradabilit desmatriaux rocheux

Soil - and testing -coefficient of degradability

of rock materialsNT 30.122(2003) Sols - reconnaissance et

essais - mesure de lacapacit d'adsorption debleu de mthylne d'unmatriau rocheux -dtermination de la valeurde bleu de mthylne d'unsol ou d'un matriaurocheux par l'essai la

tache

Soil - and testing -measurement of theadsorption capacity ofmethylene blue with rockymaterial - determination ofthe value of methyleneblue of a soil or rock by thetask test material

NT 30.123(2003) Sols - reconnaissance etessais - essais l'appareiltriaxial de rvolution -gnralites - dfinitions

Soil - and testing - testingin the revolution - general -definitions triaxialapparatus

NT 30.124(2003) Sols - reconnaissance etessais - essai decisaillement rectiligne laboite - partie 1 :cisaillement direct

Soil - and testing - straightshear test to the box - part1: direct shear

NT 30.125(2003) Sols - reconnaissance etessais - essai decisaillement rectiligne laboite - partie 2 :cisaillement altern

Soil - and testing - straightshear test to the box - part2: alternate shear

NT 30.126(2003) Sols - reconnaissance etessais - essaiscissomtrique enlaboratoire

Soil - and testing - vane inlaboratory

NT 30.127(2003) Sols - reconnaissance etessais - essai l'appareiltriaxial de rvolution -

appareillage - prparation

Soils - recognition andtesting - test to the devicetriaxial of revolution -

equipment - preparation of


10/84


des prouvettes essai(uu) non consolide nondraine - essai (cu + u)consolide non draine avecmesure de pressioninterstitelle - essai (cd)consolide draine

test specimens - test (uu)non consolidated nondrains - test (cu + u)consolidates non-drainingwith pressure interstitelle -test (cd) consolidateddrained

NT 30.128(2003) Sols - reconnaissance etessais - essai decompression uniaxiale

Soil - and testing - uniaxialcompression test

NT 30.129(2003) Sols - reconnaissance etessais - indice cbr aprsimmersion indice cbrimmediat - indice portantimmediat - mesure surchantillon compacte dansle moule cbr

Soil - and testing - indexcbr after immersion - indexcbr immediate - bearingimmediate index - measureon compact sample in thecbr mould


essais - essaioedomtrique - partie 1 :essai de compressibilitesur matriaux fins quasisaturs avec chargementpar paliers

Soil - and testing -

oedometer test - part 1:test of compressibility onmaterials purposes almostsaturated with loadincrements

NT 30.131(2003) Sols - reconnaissance etessais - essai degonflement l'oedomtre -dtermination desdformations parchargement de plusieursprouvettes

Soil - and testing - test ofswelling the oedometer -determination of strains byloading of test pieces

NT 30.132(2003) Sols - reconnaissance etessais - dtermination desrfrences de compactaged'un matriau - essaiproctor normal essaiproctor modifie

Soil - and testing -determination of normalmaterial - test proctorcompaction references -proctor test modified

NT 30.133(2003) Sols - reconnaissance etessais - essaipressiomtrique menard -partie 1 : essai sans cycle

Soil - and testing - mnardpressuremeter test - part 1:test cycle

NT 30.134(2003) Sols - reconnaissance etessais - essaiscissomtrique en place

Soil - and testing - place invane

NT 30.135(2003) Sols - reconnaissance etessais - essai depntration statique

Soil - and testing - staticpenetration test

NT 30.136(2003) Geotechnique - sols :reconnaissance et essais -essai de pntrationdynamique type a

Geotechnical engineering -soil: recognition andtesting - penetrationdynamics type


11/84


NT 30.137(2003) Geotechnique - sols :reconnaissance et essais -sondage au pntromtredynamique type b

Geotechnical engineering -soil: recognition andtesting - survey to thedynamic penetrometertype b

NT 30.138(2003) Sols - reconnaissance etessais - essai de

pntration au carottier

Soil - and testing - test ofpenetration to the core

NT 30.139(2003) Sols - reconnaissance etessais - essai au piezocone

Soil - and testing - thepiezocone test

NT 30.140(2003) Sols - reconnaissance etessais - essai decisaillement au phicomtre

Soil - and testing - testingof the phicometre shear

NT 30.141(2003) Sols - reconnaissance etessais - essai de pompage

Soil - and testing -pumping test

NT 30.142(2003) Sols - reconnaissance etessais - essai d'eau lefranc

Soil - and testing - testingof water lefranc

NT 30.143(2003) Sols - reconnaissance etessais - prlvement dessols et des roches -mthodologie etprocdures

Soil - and testing -sampling of soils and rocks- methodology andprocedures

NT 30.144(2003) Execution desterrassements -classification desmatriaux utilisables dansla construction desremblais et des couches deforme d'infrastructures

routires

Execution of theearthworks - classificationof the materials used in theconstruction ofembankments and cappingof road infrastructurelayers

NT 30.145(2003) Execution desterrassements -terminologie

Execution of theearthworks - terminology

NT 30.146(2003)(ISO 14688/1-2002)

Recherches et essaisgeotechniques -identification etclassification des sols -partie 1 : identification etdescription

Research and testinggeotechnical -identification andclassification of soil - part1: identification anddescription

NT 30.147(2003)

(ISO/DIS 14688/2-2001)

Genie geotechniques -

identification etclassification des sols -partie 2 : classification etvaluation quantitative

Engineering geotechnical -

identification andclassification of soil - part2: classification andquantitative evaluation

NT 30.148(2003)(ISO/DIS 14689/2-2001)

Genie geotechniques -identification et descriptionde la roche

Geotechnical engineering -identification anddescription of the rock

2.1.6. Design of structures for earthquake resistance

Refer to Basis of Structural Design


12/84


2.1.7. Crane loads

Not Specified

2.1.8. Fire Protection (passive)

Refer to Material Standards and Design Criteria

2.1.9. Machine Foundations

Not Specified

2.1.10. Coating/corrosion Protection

Refer to Material Standards

2.1.11. Material Standards

NT 21.02(1984) Granulats - fidlit desmthodes d'essais

Aggregates - accuracy ofthe testing methods

NT 21.03(2003)(EN 932/2-1999)

Essais pour dterminer lesproprits gnrales desGranulats - partie 2 :mthodes de reductiond'un chantillon delaboratoire

Tests to determine thegeneral properties ofaggregates - part 2:methods of reduction for alaboratory sample

NT 21.05(2002) Granulats - mesures desmasses volumiques,coefficient d'absorption etteneur en eau des sables

Aggregates -measurements of thedensities, coefficient ofabsorption and watercontent of sands

NT 21.06(2002) Granulats - lments pourl'identification desgranulats

Aggregates - elements forthe identification of theaggregates

NT 21.08(2003)(EN 1097/1-1996)

Essais pour dterminer lescaractristiquesmcaniques et physiquesdes granulats - partie 1 :dtermination de larsistance l'usure (micro-deval)

Tests to determine themechanical and physicalcharacteristics of theaggregates - part 1:determination of wearresistance (micro-deval)

NT 21.09(2002)(EN 12390/4-2000)

Essai pour bton durci -partie 4 : rsistance encompression -caractristiques desmachines d'essai

Test for hardened concrete- part 4: resistance incompression -characteristics of thetesting machines


13/84


NT 21.10(1986) Betons - caractristiquesparticulires des machinesHydrauliques pour essaisde compression (pressespour matriaux durs)

Concretes - particularcharacteristics of thehydraulics machines fortests of compression(presses for hard materials

NT 21.11(1984) Agglomrs - blocs enbton pour murs et

cloisons - dfinitions etvocabulaire

Agglomerates - concreteblocks for walls and

partitions - definitions andvocabularyNT 21.13(1984) Agglomrs - blocs en

bton de granulatscourants pour murs etcloisons

Agglomerates - concreteblocks of currentaggregates for walls andpartitions

NT 21.14(1984) Agglomrs - blocs enbton de granulats lgerspour murs et cloisons

Agglomerates - concreteblocks of light aggregatesfor walls and partitions

NT 21.16(1984) Blocs en bton cellulaireautoclave pour murs

Autoclave-sealed cellularconcrete blocks for walls

NT 21.17(1984) Agglomrs - blocs enbton pour murs etcloisons - dimensions

Agglomerates - concreteblocks for walls andpartitions - dimensions

NT 21.18(2001) Granulats - prlvement dematriaux en coursd'coulement

Aggregates shaped bywater (gravel)

NT 21.19(2003)(EN 933/3-1997)

Essais pour dterminer lescaractristiquesgeomtriques desgranulats - partie 3 :dtermination de la forme

des granulats - coefficientd'aplatissement

Tests to determine thegeometrical characteristicsof aggregates - part 3:determination of the shapeof the aggregates -

coefficient of flatnessNT 21.20(2001)(ISO 390-1993)

Produits en cimentrenforc par des fibres chantillonnage et contrle

Cement productsreinforced by fibres sampling and controls

NT 21.21(2001) Granulats - essai losangeles

Aggregates - los angelesabrasion test

NT 21.22(2003)(EN 1097/2-1998)

Essais pour dterminer lescaractristiquesmcaniques et physiquesdes granulats - partie 2 :mthodes pour ladtermination de larsistance lafragmentation

Tests to determine themechanical characteristicsand physics of theaggregates - part 2:methods for measurementof the resistance tofragmentation

NT 21.23(2003)(EN 1097/8-1999)

Essais pour dterminer lescaractristiquesmcaniques et physiquedes granulats - partie 8 :dtermination ducoefficient de polissageacclr

Tests to determine themechanical characteristicsand physics of theaggregates - part 8:determination of thecoefficient of acceleratedpolishing


14/84


NT 21.24(2001) Granulats - mesure ducoefficient de friabilite dessables

Aggregates - measurementof the coefficient ofbrittleness of sands

NT 21.25(2001) Granulats - dterminationde la propret superficielle

Aggregates - determinationof surface cleanliness

NT 21.26(2003)(EN 933/8-1999)

Essais pour dterminer lescaractristiques

geomtriques desgranulats - partie 8 :valuation des fines -quivalent de sable

Tests to determine thegeometrical characteristics

of aggregates - part 8:evaluation of fines - sandequivalent

NT 21.27(2001) Granulats - dterminationde l'indice des vides rigden

Aggregates - determinationof voids (specific gravity

NT 21.29(2001) Granulats - quivalent desable

Aggregates - sandequivalent

NT 21.30(2003) Granulats - dfinitions,conformit, spcifications

Aggregates - definitions,conformity, specifications

NT 21.31(2001) Granulats - dterminationde l'indice de continuite

Aggregates - determinationof the index of continuity

NT 21.94(2003)(EN 1097/7-1999)

Essais pour dterminer lescaractristiquesmcaniques et physiquesdes granulats - partie 7 :dtermination de la massevolumique reelle du filler -mthode au pycnomtre

Tests to determine themechanical characteristicsand physics of theaggregates - part 7:determination of the massvoluminal real of the filler -method of the pycnometer

NT 21.95(2001) Granulats - dterminationde l'paisseur moyennedes gravillons

Aggregates - determinationaverage thickness of finegravels

NT 21.98(2001) Granulats - dterminationde l'homogeneite desgranulats (d > 4 mm)

Aggregates - determinationof the homogeneity of theaggregates (D > 4 mm)

NT 21.99(2001) Granulats - essai deval Aggregates - test devalNT 21.100(2001) Granulats - mesure de la

rugosit d'une surface l'aide du pendule defrottement

Aggregates - measurementofthe roughness of asurface using pendulum offriction

NT 21.101(2003)(EN 1744/1-1998)

Essais pour dterminer lesproprits chimiques desgranulats - partie 1 :analyse chimique

Tests to determine thechemical properties ofaggregates - part 1:chemical analysis

NT 21.102(1990) Granulats - mesure de lateneur en chlore - mthodepar dissolution

Aggregates - measurementof the chlorine content -method by dissolution

NT 21.105(1990) Granulats - mise enevidence de matiresorganiques parcolorimetrie

Aggregates - descriptionorganic matter bycolorimetry

NT 21.109(1990)(ISO 1920-1976)

Essais du bton -dimensions, tolrances etdestination des

Tests of the concrete -dimensions, tolerances anddestination of specimens


15/84


prouvettes

NT 21.110(1990)(ISO 2736/1-1986)

Essais du bton -prouvettes - partie 1 :chantillonnage du btonfrais

Tests of the concretespecimens - part 1:sampling of freshly-mixedconcrete

NT 21.111(1990)(ISO 2736/2-1986)

Essais du bton -prouvettes - partie 2 :confection et conservationdes prouvettes pouressais de rsistance

Tests of the concretespecimens - part 2:preparation andpreservation of specimensfor strength tests

NT 21.113(1990)(ISO 4012-1978)

Bton - dtermination de larsistance lacompression desprouvettes

Concrete - measurement ofthe compressive strentghof specimens

NT 21.114(1990)(ISO 4103-1979)

Bton - classification de laconsistance

Concrete - classification ofconsistency

NT 21.115(1990)(ISO 4108-1980) Bton - dtermination de larsistance la traction parfendage des prouvettes

Concrete - determination oftensile strength by splittingof specimens

NT 21.116(1990)(ISO 4109-1980)

Bton frais - dterminationde la consistance essaid'affaissement

Freshly-mixed concrete -determination ofconsistency - slump test

NT 21.117(1990)(ISO 4110-1979)

Bton frais - dterminationde la consistance - essaivebe

Freshly-mixed concrete -determination ofconsistency vebe timetest

NT 21.118(1990)(ISO 4111-1979)

Bton frais - dterminationde la consistance - degrede compactabilite

Freshly-mixed concrete -determination ofconsistency - degree ofcompactability

NT 21.119(1990)(ISO 4848-1980)

Bton - dtermination de lateneur en air du bton frais- mthode de lacompressibilite

Concrete - determination ofair content of the freshly-mixed concrete - methodof compressibility

NT 21.120(1990)(ISO 6275-1982)

Bton durci - dterminationde la masse volumique

Hardened concrete -determination of thedensity

NT 21.121(1990)(ISO 6276-1982)

Bton frais compacte -dtermination de la massevolumique

Freshly-mixed compactedconcrete - determinationof the density

NT 21.122(1990)(ISO 6784-1982)

Bton - dtermination dumodule d'lasticit statiqueen compression

Concrete - determination ofthe static modulus ofelasticity in compression

NT 21.123(1990)(ISO 4013-1978)

Bton - dtermination de larsistance la flexion desprouvettes

Concrete - measurement ofthe specimens resistanceto flexure


16/84


NT 21.127(1990)(ISO 6782-1982)

Granulats pour bton -dtermination de la massevolumique en vrac

Aggregates for concrete -determination of the bulkdensity

NT 21.137(1991) Betons - mesure du tempsd'ecoulement des betonset des mortiers auxmaniabilimtres

Concretes - measurementof the workability of theconcretes and mortars

NT 21.176(2002)(EN 934/2-2001) Adjuvants pour beton,mortier et coulis - partie 2 :adjuvants pour bton -dfinitions, exigences,conformit, marquage ettiquetage

Additives for concrete,mortar, and grout - part 2:additives for concrete -definitions, requirements,conformity, marking andlabelling

NT 21.177(2002)(EN 480/1-1997)

Adjuvants pour beton,mortier et coulis -mthodes d'essais - partie1 : bton et mortier derfrence pour essais

Additives for concrete,mortar and grout - testingmethods - part 1: concreteand mortar of reference fortests

NT 21.178(2002)(EN 480/2-1996) Adjuvants pour beton,mortier et coulis -mthodes d'essais - partie2 : dtermination du tempsde prise

Additives for concrete,mortar and grout - testmethods - part 2:determination of settingtime

NT 21.179(2002)(EN 480/4-1996)

Adjuvants pour bton,mortier et coulis -mthodes d'essais - partie4 : dtermination duressuage du bton

Additives for concrete,mortar and grout - testingmethods - part 4:determination of the liquidpenetration of the concrete

NT 21.180(2002)

(EN 480/5-1996)

Adjuvants pour beton,

mortier et coulis -mthodes d'essais - partie5 : dtermination del'absorption capillaire

Additives for concrete,

mortar and grout - testingmethods - part 5:determination of capillaryabsorption

NT 21.181(2002)(EN 480/6-1996)

Adjuvants pour beton,mortier et coulis -mthodes d'essais - partie6 : analyse infrarouge

Additives for concrete,mortar and grout - testingmethods - part 6: analyzeinfrared

NT 21.182(2002)(EN 480/8-1996)

Adjuvants pour beton,mortier et coulis -mthodes d'essais - partie

8 : dtermination del'extrait sec conventionnel

Additives for concrete,mortar and grout - testingmethods - part 8:

determination of theconventional sec extractNT 21.183(2002)(EN 480/10-1996)

Adjuvants pour beton,mortier et coulis -mthodes d'essais - partie10 : dtermination de lateneur en chlorure solubledans l'eau

Additives for concrete,mortar and grout - testingmethods - part 10:determination of thecontent soluble chloride inwater

NT 21.184(2002)(EN 480/11-1999)

Adjuvants pour beton,mortier et coulis -mthodes d'essais - partie11 : dtermination des

Additives for concrete,mortar and grout - testingmethods - part 11:determination of the


17/84


caractristiques des videsd'air dans le bton durci

characteristics of air voidsin the hardened concrete

NT 21.185(2002)(EN 480/12-1997)

Adjuvants pour beton,mortier et coulis -mthodes d'essais - partie12 : dtermination de lateneur en alcains dans lesadjuvants

Additives for concrete,mortar and pure - testingmethods - part 12:determination of thecontent of alcains inadditives

NT 21.186(2002)(EN 12390/7-2000)

Essai pour bton durci -partie 7 : masse volumiquedu bton

Test for hardened concrete- part 7: density of theconcrete

NT 21.188(2002)(EN 934/6-2001)

Adjuvants pour beton,mortier et coulis - partie 6 :chantillonnage, contrleet valuation de laconformit, marquage ettiquetage

Additives for concrete,mortar and grout - part 6:sampling, control andevaluation of conformity,marking and labelling

NT 21.189(2002)(EN 450-1994)

Cendres volantes pourbton - dfinitions,exigences et contrle dequalit

Fly-ashes for concrete -definitions, requirementsand quality control

NT 21.190(2002)(EN 1097/3-1998)

Essais pour dterminer lescaractristiquesmcaniques et physiquesdes granulats - part 3 :mthode pour ladtermination de la masse

volumique en vrac et de laporosite intergranulaire

Tests to determine themechanical characteristicsand physics of theaggregates - share 3:method for determinationof the loose bulk density

and calculation of the voidsNT 21.192(2002)(EN 933/1-1997)

Essais pour dterminer lescaractristiquesgeomtriques desgranulats - partie 1 :dtermination de lagranularite analysegranulomtrique partamisage

Tests to determine thegeometrical characteristicsof aggregates - part 1:determination of thegrading size analysis ofgrading by sifting

NT 21.193(2002)

(EN 1097/6-2000)

Essais pour dterminer les

caractristiquesmcaniques et physiquesdes granulats - partie 6 :dtermination de la massevolumique reelle et ducoefficient d'absorptiond'eau

Tests to determine the

mechanical characteristicsand physics of theaggregates - part 6:determination of theeffective density and waterabsorption coefficient

NT 21.194(2002) valuation des liquides,sols et gaz nocifs pour lebton - partie 2 :prlvement et analyse deschantillons d'eau et de sol

Evaluation of the liquids,grounds and gases harmfulfor the concrete - part 2:sampling and analyzingwater and ground samples


18/84


NT 21.195(2002)(EN 206/1-2000)

Bton - partie 1 :spcification,perforfmances, productionet conformit

Concrete - part 1:specification,perforfmances, productionand conformity

NT 21.198(2003)(EN 932/1-1996)

Essais pour dterminer lesproprits gnrales desgranulats - partie 1 :

mthodesd'chantillonnage

Tests to determine thegeneral properties ofaggregates - part 1:

sampling proceduresNT 21.199(2003)(EN 932/3-1996)

Essais pour dterminer lesproprits gnrales desgranulats - partie 3 :procdure et terminologiepour la descriptionpetrographique simplifie

Tests to determine thegeneral properties ofaggregates - part 3:procedure and terminologyfor simplified petrographicdescription

NT 21.200(2003)(EN 932/5-1999)

Essais pour dterminer lesproprits gnrales desGranulats - partie 5 :quipement commun ettalonnage

Tests to determine thegeneral properties ofaggregates - part 5:common equipment andcalibration

NT 21.201(2003)(EN 932/6-1999)

Essais pour dterminer lesproprits gnrales desGranulats - partie 6 :dfinitions de rptabilitet de la reproductibilit

Tests to determine thegeneral properties ofaggregates - part 6:definitions of repeatabilityand reproducibility

NT 21.202(2003)(EN 933/2-1995)

Essais pour dterminer lescaractristiquesgeomtriques desgranulats - partie 2 :dtermination de lagranularite - tamis decontrle, dimensionsnominales des ouvertures

Tests to determine thegeometric characteristicsof aggregates - part 2:determination ofgranularity - control sizesof sieve openings

NT 21.203(2003)(EN 933/4-1999)

Essais pour dterminer lescaractristiquesgeomtriques desgranulats - partie 4 :dtermination de la formedes grains - indice deforme

Tests to determine thegeometric characteristicsof aggregates - part 4:determination of the shapeof the grains-.shape index

NT 21.204(2003)(EN 933/5-1998)

Essais pour dterminer lescaractristiquesgeomtriques desgranulats - partie 5 :dtermination dupourcentage de surfacescassees dans les gravillons

Tests to determine thegeometric characteristicsof aggregates - part 5:determination of thepercentage of brokensurfaces in gravel

NT 21.205(2003)(EN 933/6-2001)

Essais pour dterminer lescaractristiquesgeomtriques desgranulats - partie 6 :valuation des

caractristiques de surface

Tests to determine thegeometric characteristicsof aggregates - part 6:evaluation of thecharacteristics of surface -

the aggregate flow


19/84


- coefficient d'ecoulementdes granulats

coefficient

NT 21.206(2003)(EN 933/7-1998)

Essais pour dterminer lesproprits geomtriques

des granulats - partie 7 :dtermination de la teneuren lments coquilliers -pourcentage des coquillesdans les gravillons

Tests to determine thegeometric properties of

aggregates - part 7:determination of thecontent of elements -percentage of shells in thegravel

NT 21.207(2003)(EN 933/9-1998)

Essais pour dterminer lescaractristiquesgeomtriques desgranulats - partie 9 :qualification des fines -essai au bleu de mthylne

Tests to determine thegeometric characteristicsof aggregates - part 9:qualification of fines - bluemethylene test

NT 21.208(2003)(EN 1097/4-1999) Essais pour dterminer lescaractristiquesmcaniques et physiquesdes granulats - partie 4 :dtermination de laporosite du filler seccompacte

Tests for determining themechanical and physicalcharacteristics aggregates -part 4: determination of thedry compacted porosity ofthe filler

NT 21.209(2003)(EN 1097/9-1998)

Essais pour dterminer lesproprits mcaniques etphysiques des granulats -partie 9 : mthode pour la

dtermination de larsistance l'usure parabrasion provoquee par lespneus crampons - essaiscandinave

Tests for determining themechanical and physicalproperties aggregates -part 9: method for the

determination of theresistance to wear byabrasion caused bystudded tires nordic test

NT 21.210(2003)(EN 1367/2-1998)

Essais pour dterminer lesproprits thermiques etl'alterabilite des granulats -partie 2 : essai au sulfatede magnesium

Testing to determine thethermal properties and thealterabilite of aggregates -part 2: magnesium sulfatetest

NT 21.211(2003)(EN 1367/3-2001)

Essais pour dterminer lesproprits thermiques etl'alterabilite des granulats -partie 3 : essai d'ebullitionpour les basaltes - coup desoleil

Testing to determine thethermal properties and thealterabilite of aggregates -part 3: tests for thermaland weathering propertiesof aggregates. Boiling testfor sonnenbrand basalt

NT 21.212(2003) Granulats - guided'interprtation de lanorme nt 21.30 (2002)

Aggregates - guide for theinterpretation of thestandard nt 21.30 (2002)


20/84


NT 21.281(2003)(EN 13369-2001)

Rgles communes pour lesproduits prfabriqus enbton

Rules for precast concreteproducts

NT 21.282(2003)(EN 12504/1-2000)

Essais pour bton dans lesstructures - partie 1 :carottes - prlvement,examen et essais en

compression

Testing concrete instructures - part 1: coredspecimens- taking,examination and testing in

compressionNT 21.284(2004)(ISO 9882-1993)

Normes de performancedans le btiment - essai deperformance des planchersprfabriqus en bton -comportement sous chargenon concentre

Performance standards inthe building - test ofperformance of precastconcrete floors- behaviourunder non-concentratedload

NT 21.285(2004)(ISO 9883-1993)

Normes de performancedans le btiment - essai deperformance des planchersprfabriqus en bton -comportement sous chargeconcentre

Performance standards inthe building - test ofperformance of precastconcrete floors- behaviorunder concentrated load

NT 21.286(2004) Norme de performancedans le btiment -presentation desperformances desplanchers prfabriqus enbton arm ou prcontraint

Standard of performancein the building -presentation ofperformance ofprefabricated orprestressed reinforcedconcrete floors

NT 21.287(2004)(EN 771/1-2003)

Spcifications pourlments de maonnerie -partie 1 : briques de terrecuite

Specification for masonryunits - part 1: bricks ofterracotta

NT 21.288(2004)(EN 771/2-2003)

Spcification pourlments de maonnerie -partie 2 : lements demaonnerie en silico-calcaire

Specification for masonryunits - part 2: elementssilico-limestone masonry

NT 21.289(2004)(EN 771/3-2003)

Spcification pourlments de maonnerie -partie 3 : lments demaonnerie en bton degranulats (granulatscourants et lgers)

Specification for masonryunits - part 3: elementsmasonry concreteaggregates (light weightaggregates)

NT 21.290(2004)(EN 771/4-2003)

Spcification pourlments de maonnerie -partie 4 : lements demaonnerie en btoncellulaire autoclave

Specification for masonryunits - part 4: elementsautoclave cellular concretemasonry

NT 21.291(2004)(EN 771/5-2003)

Spcification pourlments de maonnerie -partie 5 : lements demaonnerie en pierrereconstituee en bton

Specification for masonryunits - part 5: elements ofrecycled stone in concretemasonry


21/84


NT 21.292(2004)(EN 771/6-2000)

Spcification pourlments de maonnerie -partie 6 : lments demaonnerie en pierrenaturelle

Specification for masonryunits - part 6: elements ofnatural stone masonry

NT 21.293(2004)(EN 772/1-2000)

Mthodes d'essai pourlments de maonnerie -

partie 1 : dtermination dela rsistance lacompression

Test methods for masonryunits - part 1:

determination ofcompression strength

NT 21.294(2004)(EN 772/2-1998)

Mthodes d'essai deslments de maonnerie -partie 2 : dtermination dupourcentage de vides dansdes lments demaonnerie en bton (parempreinte sur papier)

Test methods for masonry- part 2: determination ofthe percentage of voids inelements of masonryconcrete (by paper mark)

NT 21.295(2004)(EN 772/3-1998)

Mthodes d'essai deslments de maonnerie -partie 3 : dtermination duvolume net et dupourcentage des vides deslments de maonnerieen terre cuite par peseehydrostatiqu

Test methods for masonryunits - part 3:determination of thevolume and the percentageof voids of masonry interracotta by weighinghydrostatic

NT 21.296(2004)(EN 772/4-1998)

Mthodes d'essai pourlments de maonnerie -partie 4 : dtermination desmasses volumiques reelleet apparente et desporosites ouverte et totaledes lments demaonnerie en pierrenaturelle

Test methods for masonryunits - part 4: real andapparent determination ofdensities and total ofmasonry elements andporosity of natural stone

NT 21.297(2004)(EN 772/5-2001)

Mthodes d'essai deslments de maonnerie -partie 5 : dtermination dela teneur en sels solublesactifs des lments demaonnerie en terre cuite

Methods of test formasonry units.Determination of the activesoluble salts content ofclay masonry units

NT 21.298(2004)

(EN 772/6-2001)

Mthodes d'essai pour des

lments de maonnerie -partie 6 : dtermination dela rsistance la tractionpar flexion des lments demaonnerie en bton degranulats

Test methods for masonry

- part 6:Determination of tensilebending strength ofaggregate concretemasonry units

NT 21.299(2004)(EN 772/7-1998)

Mthodes d'essai deslments de maonnerie -partie 7 : dtermination del'absorption d'eau l'eaubouillante des lments de

maonnerie en terre cuite

Test methods for masonry- part 7: part 7:determination of waterabsorption of clay masonrydamp proof course units

by boiling in water


22/84


servant de coupure decapillarite

NT 21.300(2004)(EN 772/9-1998)

Mthodes d'essai deslments de maonnerie -partie 9 : dtermination duvolume et du pourcentagede vides et du volume netabsolu des lments demaonnerie ensilicocalcaire parremplissage de sable

Test methods for masonry- part 9: determination ofvolume and percentage ofvoids and net volume ofclay and calcium silicatemasonry units by sandfilling

NT 21.301(2004)(EN 772/10-1999)

Mthodes d'essai pourlments de maonnerie -partie 10 : dterminationde la teneur en humiditdes lments de

maonnerie en silico-calcaire et en btoncellulaire autoclave

Test methods for masonryunits - part 10:determination of moisturecontent of calcium silicateand autoclaved aerated

concrete units

NT 21.302(2004)(EN 772/11-2000)

Mthodes d'essai deslments de maonnerie -partie 11 : dterminationde l'absorption de l'eau parcapillarite des lments demaonnerie en bton degranulats, en pierrereconstituee et naturelle etdu taux initial d'absorptiond'eau des lments demaonnerie en terre cuite

Test methods for masonry- part 11: determination ofwater absorption ofaggregate concrete,manufactured stone andnatural stone masonryunits due to capillaryaction and the initial rate ofwater absorption of claymasonry units

NT 21.303(2004)(EN 772/13-2000)

Mthodes d'essai pourlments de maonnerie -partie 13 : dterminationde la masse volumiqueabsolue sche et de lamasse volumiqueapparente sche deslments de maonnerie(excepte les pierresnaturelles)

Test methods for masonry- part 13: determination ofnet and gross dry densityof masonry units (exceptfor natural stone)

NT 21.304(2004)(EN 772/14-20010

Mthode d'essai pour deslments de maonnerie -partie 14 : dterminationde la variation due l'humidit des lments demaonnerie en bton degranulats et en pierrereconstituee

Test method for masonry -part 14: determination ofmoisture movement ofaggregate concrete andmanufactured stonemasonry units


23/84


NT 21.305(2004)(EN 772/15-2000)

Mthodes d'essai deslments de maonnerie -partie 15 : dterminationde la permabilit lavapeur d'eau des lmentsde maonnerie en bton decellulaire autoclave

Test methods for masonry- part 15: determination ofwater vapour permeabilityof autoclaved aeratedconcrete masonry units

NT 21.306(2004)(EN 772/16-2000) Mthodes d'essai pourlments de maonnerie -partie 16 : dterminationdes dimensions

Test methods for masonryunits - part 16:determination ofdimensions

NT 21.307(2004)(EN 772/18-2000)

Mthodes d'essai deslments de maonnerie -partie 18 : dterminationde la rsistance augel/degel des lments demaonnerie en silico-calcaire

Test methods for masonry- part 18: determination offreeze-thaw resistance ofcalcium silicate masonryunits

NT 21.308(2004)(EN 772/19-2000)

Mthodes d'essai deslments de maonnerie -partie 19 : dterminationde la dilatation l'humiditdes grands lments demaonnerie en terre cuiteperfores horizontalement

Test methods for masonry- part 19: determination ofmoisture expansion oflarge horizontallyperforated clay masonryunits

NT 21.309(2004)(EN 772/20-2000)

Mthodes d'essai deslments de maonnerie -partie 20 : dterminationde la planeite des lmentsde maonnerie en bton degranulats, en pierrenaturelle et en pierrereconstituee

Test methods for masonry- part 20: determination offlatness of faces ofmasonry units

NT 21.310(2004)(EN 680-1993)

Dtermination du retrait desechage du bton cellulaireautoclave

Test methods for masonry- part 20: determination offlatness of faces ofmasonry units

NT 21.311(2004)(EN 1052/1-1998)

Mthodes d'essai de lamaonnerie - partie 1 :dtermination de larsistance la

compression

Test methods for masonry- part 1: determination ofresistance to compression

NT 21.312(2004)(EN 1052/2-1999)

Mthodes d'essai de lamaonnerie - partie 2 :dtermination de larsistance la flexion

Test methods for masonry- part 2: determination ofresistance to flexure

NT 21.313(2004)(EN 1052/3-2002)

Mthodes d'essai de lamaonnerie - partie 3 :dtermination de larsistance initiale aucisaillement

Test methods for masonry- part 3: determination ofthe initial shear strength


24/84


NT 21.314(2004)(EN 1052/4-2000)

Mthodes d'essai de lamaonnerie - partie 4 :dtermination de larsistance au cisaillement,en tenant compte de lacouche de coupure decapillarite

Test methods for masonry- part 4: methods of test formasonry. Determination ofshear strength includingdamp proof course

NT 26.01(1983) Tubes en acier, tubesronds souds formes froid executes partir deproduits lamins chaud

Steel tubes, welded tubeshapes cold formed fromhot-rolled products

NT 26.02(1983) Tubes en acier, tubesronds souds formes froid executes partir deproduits lamins froid

Steel tubes, welded tubeshapes cold formed fromcold-rolled products

NT 26.03(1983) Tubes en acier, tubescarres et rectangulairesexecutes partir deproduits lamins froid

Steel tubes, square andrectangular tubing formedfrom cold-rolled products

NT 26.04(1983) Tubes en acier, tubescarres et rectangulairesexecutes partir deproduits lamins chaud

Steel tubes, square andrectangular tubing formedfrom hot-rolled products

NT 26.05(2004) Acier bton pourarmatures passives - partie2 : barres nervures

Steel for the reinforcementof concrete - part 2:deformed bars

NT 26.06(1984)(ISO 4948/1-1982)

Aciers - classification -partie 1 : classification enaciers allis et en aciers

non allis basee sur lacomposition chimique

Steels - classification - part1: classification of alloy andnon-alloy steel based on

the chemical compositionNT 26.07(1984)(ISO 4948/2-1981

Aciers - classification -partie 2 : classification desaciers allis et aciers nonallis en fonction desprincipales classes dequalit et descaractristiques principalesde proprit oud'application

Steels - classification - part2: classification of allioyand non-alloy steelsaccording to main qualityclasses and main propertyor applicationcharacteristics

NT 26.08(1998)(ISO 404-1992)

Aciers et produitssiderurgiques - conditionsgnrales techniques delivraison

Steels and steel products -terms and conditionsdelivery techniques

NT 26.09(1984)(ISO 630-1980)

Aciers de constructionmtallique

Structural steels

NT 26.10(2000)(ISO 3573-1999)

Tles en acier au carbonelamines chaud dequalit commerciale etpour emboutissage

Hot-rolled carbon steelsheet of commercial anddrawing qualities


25/84


NT 26.11(2000)(ISO 3574-1999)

Tles en acier au carbonelamines froid de qualitcommerciale et pouremboutissage

Cold-reduced carbon steelsheet ofcommercial anddrawing qualities

NT 26.12(1984)ISO 3575-1976

Tles en acier au carbonegalvanises en continu parImmersion chaud, de

qualit commerciale, pourpliage et agrafage ou pouremboutissage

Continuous hot-dipgalvanized carbon steelsheet of commercial and

drawing quality forbending and stapling

NT 26.13(1984)(ISO 65-1981)

Tubes en acier au carbonefiletables selon ISO 7/1

Threadable carbon steeltubes according to ISO 7/1

NT 26.14(2000)(ISO 7/1-1994)

Filetages de tuyauteriepour raccordement avectanchit dans le filet -partie 1 : dimensions,tolrances et dsignation

Pipe threads wherepressure-tight joints aremade on the threads -- part1: dimensions, tolerancesand designation

NT 26.16(2000)

(ISO 228/1-1994)

Filetages de tuyauterie

pour raccordement sanstanchit dans le filet -partie 1 : dimensions,tolrances et dsignation

Pipe threads where

pressure-tight joints arenot made on the threads -part 1: dimensions,tolerances and designation

NT 26.17(2000)(ISO 4145-1986)

Raccords en acier non alli,filetes suivant ISO 7/1

Non alloy steel threadedfittings according to ISO7/1

NT 26.18(1984)(ISO 4019-1982)

Profils creux en acier, finis froid - dimensions etcaractristiques

Hollow steel profiles, cold -finished size and features

NT 26.30(1994)(ISO 4998-1991)

Tles en acier au carbonegalvanises en continu parImmersion chaud, dequalit destine laconstruction

Continuous hot-dip zinc-coated carbon steel sheetof structural quality

NT 26.31(1994)(ISO 4999-1991)

Tles en acier au carbonelamines froid, revtuesd'un alliage au plomb encontinu par immersion chaud, de qualitcommerciale et pouremboutissage

Continuous hot-dip terne(lead alloy) coated cold-reduced carbon steel sheetof commercial, drawingand structural qualities

NT 26.32(2000)(ISO 5000-1993) Tles en acier au carbonelamines froid, revtuespar immersion chaud encontinu d'une couched'aluminium-silicium, dequalit commerciale etpour emboutissage

Continuous hot-dipaluminium-silicon-coatedcold-reduced carbon steelsheet of commercial anddrawing qualities

NT 26.33(1991)(ISO 5002-1982)

Tles en acier au carbonelamines chaud et froid, revtues par zingagelectrolytique (tleslectro-zinguees) de qualit

Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheetof commercial and drawingqualities


26/84


commerciale et pouremboutissage

NT 26.34(1994)(ISO 5950-1991)

Tles en acier au carbonelamines froid, revtuesen continu d'un dptlectrolytique d'tain, dequalit commerciale etpour emboutissage

Electrolytic tin-coated cold-reduced carbon steel sheetof commercial and drawingqualities

NT 26.35(2000)(ISO 5951-1993)

Tles lamines chaud enacier limite d'lasticit etaptitude au formageaccrues

Hot-rolled steel sheet ofhigher yield strength withimproved formability

NT 26.36(1991)(ISO 5952-1983)

Tles en acier deconstruction lamines chaud en continu

rsistance amliore lacorrosion atmosphrique

Continuously hot-rolledconstruction steel toimproved atmospheric

corrosion resistanceNT 26.39(2000)(ISO 3755-1991)

Aciers au carbone moulspour constructionmcanique d'usagegnral

Cast carbon steels forgeneral engineeringpurposes

NT 26.40(1985)(ISO 4950/1-1981)

Produits plats en acier haute limite d'lasticit -partie 1 : prescriptionsgnrales

Products in high yieldstrength steel plates - part1: general requirements

NT 26.41(1985)

(ISO 4950/2-1981)

Produits plats en acier

haute limite d'lasticit -partie 2 : produits livrs l'tat normalis ou delaminage contrle

High yield strength flat

steel products -- part 2:products supplied in thenormalized or controlledrolled condition

NT 26.42(1985)(ISO 4950/3-1981)

Produits plats en acier haute limite d'lasticit -partie 3 : produits livrs l'tat traite (trempe +revenu)

High yield strength flatsteel products -- part 3:products supplied in theheat-treated (quenched +tempered) condition

NT 26.43(1991)(ISO 4951-1979)

Barres, profiles etpoutrelles en acier hautelimite d'lasticit

High yield strength steelbars and beams profiles

NT 26.44(1997)(ISO 4995-1993)

Tles en acier deconstruction lamines chaud

Hot-rolled steel plate

NT 26.45(2001)(ISO 4996-1999)

Tles lamines chaud enacier de construction haute limite d'lasticit

Hot rolled high yieldstrength steel

NT 26.46(2000)(ISO 4997-1999)

Tles en acier deconstruction lamines froid

Cold-rolled sheet steel

NT 26.47(1991)(ISO 6316-1982)

Feuillards lamins chauden acier de construction

Hot-rolled steel strip ofstructural quality


27/84


NT 26.48(1986)(ISO 6317-1982)

Feuillards en acier aucarbone lamins chaud,de qualitCommerciale et pouremboutissage

Hot-rolled carbon steelstrip, quality commercialand drawing

NT 26.49(1985)(ISO 6930-1983)

Produits plats en acier haute limite d'lasticit

pour formage froid

In high yield strength steelplates for cold formed

productsNT 26.50(1986)(ISO 4957-1980)

Aciers outils Steel tools

NT 26.52(1997)(ISO 4885-1996)

Produits ferreux -traitements thermiques -vocabulaire

Ferrous products - thermaltreatments - vocabulary

NT 26.53(1999)(ISO 11950-1995)

Fer-chrome lectrolytiquelamine froid

Electrolytic iron chromecold laminated

NT 26.54(1999)(ISO/TR 15510-1997)

Aciers inoxydables -composition chimique

Stainless steels - chemicalcomposition

NT 26.55(1999)

(ISO 13976-1998)

Tles fortes en acier de

construction lamines chaud en bobines

Hot-rolled steel plate in

coilsNT 26.64(1986)(ISO 1052-1982)

Aciers de constructionmcanique d'usagegnral

Structural mechanics ofgeneral purpose steels

NT 26.69(1999) Produits siderurgiques -dtermination del'allongement total pourcent sous charge maximale

Steel products -determination of totalelongation percent undermaximum load

NT 26.70(2001)(ISO 5954-1998)

Tles en acier au carbonelamines froid

caractristiques spcialesde duret

Cold-reduced carbon steelsheet according to

hardness requirementsNT 26.71(1995)(ISO 10384-1992)

Tles lamines chaud enacier au carbone pouroutillage

Hot-rolled carbon steelsheet as defined bychemical composition

NT 26.77(2001)(ISO 7788-1985)

Acier - tat de surface destles et larges-platslamins chaud -conditions de livraison

Steel - hot rolled plates andwide flanged shapescondition - terms ofdelivery

NT 26.80(1986)(ISO 7452-1984)

Tles en acier deconstruction lamines

chaud tolrances surdimensions et forme

Hot rolled steel -construction tolerances- on

shape and dimensionsNT 26.86(1997)(ISO 1035/1-1980)

Barres en acier lamines chaud - dimensions desbarres rondes

Rolled hot steel bar -dimensions of round bars

NT 26.87(1997)(ISO 1035/2-1980)

Barres en acier lamines chaud - dimensions desbarres carrees

Rolled hot steel bar -dimensions of square bars

NT 26.88(1997)(ISO 1035/3-1980)

Barres en acier lamines chaud - dimensions desbarres plates

Steel bar rolled hot -dimensions of flat bars


28/84


NT 26.89(1997)(ISO 1035/4-1982)

Barres en acier lamines chaud - tolrances

Hot rolled steel bars -tolerances-

NT 26.90(1994)(ISO 185-1988)

Fontes grises de moulage -classification

Gray cast iron--classification

NT 26.91(1987)(ISO 945-1975)

Fonte - dsignation de lamicrostructure du graphite

Cast iron - designation ofthe microstructure ofgraphite

NT 26.92(1987)(ISO 946-1975) Fonte grise - essai de chocsur prouvette nonentaille

Grey cast iron - notchedimpact test

NT 26.93(2000)(ISO 1083-1987)

Fonte graphite spheroidal- classification

Ductile cast iron -classification

NT 26.94(1987)(ISO 2892-1973)

Fonte austenitique Austenitic cast irons -classifications

NT 26.95(1987)(ISO 5922-1981)

Fonte malleable Cast iron malleable

NT 26.112(1996)(ISO 6935/1-1991)

Acier bton pourarmatures passives - partie

1 : barres lisses - rondslisses

Steel for the reinforcementof concrete - part 1:

smooth round barsNT 26.114(1997)(ISO 10144-1991)

Systme particulier decertification des barres etfils d'acier pour lerenforcement desconstructions en beton

Certification scheme forsteel bars and wires for thereinforcement of concretestructures

NT 26.115(1992)(ISO 7900-1988)

Fil en acier galvanis pourclotures

Wire galvanized fence

NT 26.116(1992)

(ISO 7989-1988)

Dpts de zinc sur fils

d'acier

Steel wire and wire

products -- non-ferrousmetallic coatings on steelwire

NT 26.117(1997)(ISO 10065-1990)

Barres en acier pour btonarm - essais de pliage-depliage

Steel bars forreinforcement of concrete -- bend and rebend tests

NT 26.125(1994)(ISO 6929-1987)

Produits en acier -dfinition et classification

Steel products definitionand classification

NT 26.126(1994)(ISO 10474-1991)

Aciers et produitssiderurgiques - documentsde contrle

Steels and products steel -control documents

NT 26.127(1997)(ISO 11484-1994) Tubes en acier pour servicesous pression -qualification et certificationdu personnel d'essais nondestructifs (end)

Steel tubes for pressure -personnel certification andqualification for non-destructive testing (ndt)

NT 26.128(1997)(ISO 12094-1994)

Tubes en acier soudspour service sous pression contrle par ultrasonspour la dtection desimperfections de laminagedes feuillards/plaques

utiliss pour la fabrication

Welded steel tubes forpressure - ultrasonictesting for the detection ofimperfections in rolledstrips/plates used in themanufacture of welded

tubes


29/84


de tubes souds

NT 26.129(1997)(ISO 13663-1995)

Tubes en acier soudspour service sous pression contrle par ultrasons dela zone adjacente aucordon de soudure pour ladtection des dedoubluresde laminage

Welded steel tubes forpressure purposes --ultrasonic testing of thearea adjacent to the weldseam for the detection oflaminar imperfections

NT 26.130(1998) Profils en acier lamins chaud - partie 1 : cornieres ailes gales - dimensions

Hot-rolled steel sections --part 1: equal-leg angles dimensions

NT 26.134(1998) Profils en acier lamins chaud - partie 5 : cornieres ailes ingales - tolrancespour les sries mtriques

et inch

Profiled steel hot-rolled -part 5: wings anglesunequal - tolerances forseries metric and inch

NT 26.135(2002)(ISO 10544-1992)

Fils en acier btontransformes froid pourarmatures passives et lafabrication des treillissouds

Cold-reduced steel wire forthe reinforcement ofconcrete and themanufacture of weldedfabric

NT 26.136(2003)(ISO 6935/3-1992)

Acier bton pourarmatures passives - partie3 : treillis souds

Steel for the reinforcementof concrete - part 3: weldedmesh

NT 26.137(2003)(ISO 11082-1992)

Systme particulier decertification des treillis

souds pour lerenforcement desconstructions en bton

Special system ofcertification of the welded

for fabrics thestrengthening of concretestructures

NT 26.138(2003)(ISO 15630/1-2002)

Aciers pour l'armature et laprcontrainte du bton -mthodes d'essai - partie 1: barres, fils machine et filspour bton arm

Steels for thereinforcement andprestressing of concrete test methods--part 1: bars,wire machine and wire forreinforced concrete

NT 26.139(2003)(ISO 15630/2-2002)

Aciers pour l'armature et laprcontrainte du bton -mthodes d'essai - partie 2: treillis souds

Steels for thereinforcement andprestressing of concrete test methods--part 2:welded fabrics

NT 26.140(2003)(ISO 15630/3-2002)

Aciers pour l'armature et laprcontrainte du bton -mthodes d'essai - partie 3: armatures deprcontrainte

Steels for thereinforcement andprestressing of theconcrete test methods--part 3: prestressing steel

2.1.12. Design of Masonry Structures

NT 30.192(2004) Travaux de btiment - Building work - small


30/84


ouvrages en maonneriede petits lments - paroiset murs - partie 1 : cahierdes clauses techniques

elements - masonrystructures part 1:specification of thetechnical provisions

NT 30.193(2004) Travaux de btiment -ouvrages en maonneriede petits lments - parois

et murs - partie 2 : rglesde calcul et dispositionsconstructives minimales

Building work - smallelements - masonrystructures part 2: rules for

the calculation andminimum constructiveprovisions

NT 30.194(2004) Travaux de btiment -ouvrages en maonneriede petits lments - paroiset murs - partie 3 : guidepour le choix des types demurs de faades enfonction du site

Building work - smallelements - masonrystructures part 3: guide tothe selection of the typesof walls of facadesaccording to the site

NT 30.195(2004)(NF ENV 1996/1/2-1995)

Calcul des ouvrages enmaonnerie - partie 1-2 :rgles gnrales - calcul ducomportement au feu

Design of masonrystructures - part 1-2:general rules - calculationof the fire resistence


31/84


2.2. ROMANIA

2.2.1. Basis of structural Design

CR 0/2012 Cod de proiectare. Baza deproiectare pentru structuri

Design Code . Basis ofStructural Design inConstruction

SR EN1990:2004/NA:2006

Bazele proiectriistructurilor. Anexanaional

Basis of structural design.National Annex

SR EN1990:2004/A1:2006/NA:2010

Bazele proiectriistructurilor. poduri deosea, pasarele i poduride cale ferat. Anexa naional

Basis of structural designAnnex A2: Application forbridges. National Annex

2.2.2. Actions on structures

CR 1-1-3/2012 Cod de proiectare.Evaluarea actiunii zapeziiasupra constructiilor

Design Code. Evaluation ofsnow action uponconstructions.

CR 1-1-4/2012 Cod de proiectare.Evaluarea actiunii vantuluiasupra constructiilor

Design Code. Evaluation ofwind action uponconstructions.

STAS 9470/1973 Hidrotehnic. Ploi maxime.Intensiti, durate,

frecvene

Hydrotechnics. Maximumrainfall. Intensities,

durations, frequenciesSR EN1991-1-1:2004

Aciuni asupra structurilor.Partea 1-1:Aciuni generale, greutispecifice, greuti proprii, ncrcri utile pentru cldiri

Actions on structures - Part1-1: General actions -Densities, self-weight,imposed loads forbuildings

SR EN1991-1-1:2004/AC:2009

Aciuni asupra structurilor.Partea 1-1:Aciuni generale, greutispecifice, greuti proprii,

ncrcri utile pentru cldiri Erat

Actions on structures - Part1-1: General actions -Densities, self-weight,imposed loads for

buildingsSR EN1991-1-2:2004

Aciuni asupra structurilor.Partea 1-2:Aciuni generale.Aciuni asupra structurilorexpuse la foc

Actions on structures - Part1-2: General actions -Actions on structuresexposed to fire

SR EN1991-1-2:2004/AC:2010

Aciuni asupra structurilor.Partea 1-2:Aciuni generale.Aciuni asupra structurilorexpuse la foc Erat

Actions on structures - Part1-2: General actions -Actions on structuresexposed to fire


32/84


SR EN1991-1-3:2005

Aciuni asupra structurilor.Partea 1-3:Aciuni generale. ncrcridate de zpad

Actions on structures - Part1-3: General actions -Snow loads

SR EN1991-1-3:2005/AC:2009

Aciuni asupra structurilor.Partea 1-3:Aciuni generale. ncrcri

date de zpad - Erat

Actions on structures - Part1-3: General actions -Snow loads

SR EN1991-1-4:2006

Aciuni asupra structurilor.Partea 1-4:Aciuni generale. Aciuniale vntului

Actions on structures - Part1-4: General actions - Windactions

SR EN1991-1-4:2006/A1:2010

Aciuni asupra structurilor.Partea 1-4:Aciuni generale. Aciuniale vntului - Amendament


SR EN1991-1-4:2006/AC:2010

Aciuni asupra structurilor.Partea 1-4:Aciuni generale. Aciuniale vntului Erat


SR EN1991-1-5:2004

Aciuni asupra structurilor.Partea 1-5:Aciuni generale. Aciunitermice

Actions on structures - Part1-5: General actions -Thermal actions

SR EN1991-1-5:2004/AC:2009

Aciuni asupra structurilor.Partea 1-5:Aciuni generale. Aciunitermice - Erat

Actions on structures - Part1-5: General actions -Thermal actions

SR EN1991-1-6:2005

Aciuni asupra structurilor.Partea 1-6:Aciuni generale Aciunipe durata execuiei

Actions on structures Part1-6: General actions -Actions during execution

SR EN1991-1-6:2005/AC:2008

Aciuni asupra structurilor.Partea 1-6:Aciuni generale Aciunipe durata execuiei - Erat

Actions on structures - Part1-6: General actions -Actions during execution

SR EN1991-1-7:2007

Aciuni asupra structurilor.Partea 1-7:Aciuni generale Aciuniaccidentale

Actions on structures - Part1-7: General actions -Accidental actions

SR EN1991-1-7:2007/AC:2010

Aciuni asupra structurilor.Partea 1-7:Aciuni generale Aciuniaccidentale - Erat

Actions on structures - Part1-7: General actions -Accidental actions

SR EN1991-2:2004

Aciuni asupra structurilor.Partea 2:Aciuni din trafic la poduri

Actions on structures - Part2: Traffic loads on bridges

SR EN1991-2:2004/AC:2010

Aciuni asupra structurilor.Partea 2:Aciuni din trafic la poduri -Erat

Actions on structures - Part2: Traffic loads on bridges

SR EN

1991-3:2007

Aciuni asupra structurilor.

Partea 3:

Actions on structures - Part

3: Actions induced by


33/84


Aciuni induse de podurirulante i maini

cranes and machinery

SR EN1991-4:2006

Aciuni asupra structurilor.Partea 4:Silozuri i rezervoare

Actions on structures - Part4: Silos and tanks

SR EN1991-1-1:2004/NA:2006

Aciuni asupra structurilor.Partea 1-1: Aciuni

generale. Greutispecifice,greuti proprii, ncrcriutile pentru cldiri. Anexanaional

Actions on structures-Part1-1: General actions-

Densities, self-weight,imposed loads forbuildings. National Annex

SR EN1991-1-2:2004/NA:2006

Aciuni asupra structurilor.Partea 1-2: Aciunigenerale. Aciuni asupra structurilor expuse la foc.Anexa naional

Actions on structures- Part1-2: General actions-Actions on structuresexposed to fire. NationalAnnex

SR EN1991-1-3:2005/NA:2006

Actiuni asupra structurilor.Partea 1-3: Aciunigenerale. ncrc ri date dezpad. Anexa naional

Actions on structures - Part1-3: General actions - Snowloads. National Annex

SR EN1991-1-4:2006/NB:2007

Aciuni asupra structurilor.Partea 1-4: Aciuni generale- Aciuni ale vntului. Anexa naional

Actions on structures - Part1-4: General actions Windactions. National Annex

SR EN1991-1-5:2004/NA:2008

Aciuni asupra structurilor.Partea 1-5: Aciunigenerale. Aciuni termice.Anexa naional

Actions on structures - Part1-5: General actions -Thermal actions. NationalAnnex

SR EN1991-1-6:2005/NB:2008

Aciuni asupra structurilor.Partea 1-6: Aciuni generale-Aciuni pe durata execuiei. Anexa naional

Actions on structures Part1-6: General actions -Actions during execution.National Annex

SR EN1991-1-7:2007/NB:2011

Aciuni asupra structurilor.Partea 1-6: Aciuni generale-Aciuni accidentale. Anexa naional

Actions on structures - Part1-7: General actions -Accidental actions.National Annex

SR EN1991-2:2004/NB:2006

Aciuni asupra structurilor.Partea 2: Aciuni din traficla poduri. Anexa naional

Actions on structures - Part2: Traffic loads on bridges.National Annex

SR EN1991-3:2007/NA:2009

Aciuni asupra structurilor.Partea 3: Aciuni induse depoduri rulante i masini. Anexa naional

Actions on structures - Part3: Actions induced bycranes and machinery.National Annex

SR EN1991-4:2006/NB:2008

Aciuni asupra structurilor.Partea 4: Silozuri irezervoare. Anexanaional

Actions on structures - Part4: Silos and tanks. NationalAnnex

2.2.3. Design of concrete structures

CR 2-1-1.1/2005 Cod de proiectare a Design code for


34/84


constructiilor cu peretistructurali din beton armat

construction withreinforced concretestructural walls

NE 012/1-2007 Normativ pentruproducerea betonului siexecutarea lucrarilor dinbeton, beton armat si

beton precomprimat Partea 1: Producereabetonului

Normative for concreteproduction and executionof plain concrete,reinforced concrete and

prestressed concrete works Part 1: Concreteproduction

NE 012/22010 Normativ pentruproducerea si executarealucrarilor din beton, betonarmat si betonprecomprimat Partea 2: Executarealucrarilor din beton

Normative for concreteproduction and executionof plain concrete,reinforced concrete andprestressed concrete works Part 2: Execution ofconcrete works

ST 009 - 2011 Specificatie tehnica privindproduse din otel utilizate caarmaturi: cerinte si criteriide performanta

Technical specification forsteel products used forreinforcement:requirements andperformance criteria

P 59-1986 Instruciuni tehnice pentruproiectarea i folosireaarmrii cu plase sudate aelementelor de beton

Technical Instructions forthe design and the use ofconcrete elementsreinforced with wire nets

C 122-1989 Instruciuni tehnic e pentruproiectarea i executarealucrrilor de construcii dinbeton aparent cu paramentnatural

Technical instructions forthe design and executionof construction works ofexposed concrete withnatural parament

C 130-1978 Instruciuni tehnice pentruaplicarea prin torcretare amortarelor i betoanelor

Technical instructions formortars and concretesapplication by spraying

NE 020 2003 (P 134 2003)

Normativ privindproiectarea planeelorcompuse din tabl cutat -beton

Normative for the design ofcomposite slabs, concretecladding

C 248-1993 Instruciuni tehnice pentrurealizarea betoanelor denisip

Technical instructions forcarrying out concrete sand

GE 039-2001 Ghid pentru determinareaexperimental in situ i nlaborator a modulului statici dinamic de elasticitate abetonului.

Guidelines for determiningthe in situ experimentallaboratory static anddynamic elasticity moduleof concrete

GE 040-2001 Ghid privind utilizareametodei electromagneticela determinareaparametrilor de armare aelementelor existente dinbeton armat

Guidelines on the use ofelectromagnetic method todetermine the parametersof reinforcing existingconcrete elements

NE 013-2002 Cod de practic pentru Code of practice for the


35/84


execuia elementelorprefabricate din beton,beton armat i betonprecomprimat

implementation of precastconcrete, reinforcedconcrete and prestressedconcrete

ST 043-2001 Specificaie tehnic privindcerinele i criteriile deperforman pentru

ancorarea n beton cusisteme mecanice imetode de ncercare

Technical specificationsand performance criteriarequirements for anchored

in concrete withmechanical systems andtest methods

ST 042-2002 Specificaie tehnic privindancorarea armturilor curini sintetice la lucrrilede consolidare aelementelor i structurilordin beton armat proiectarei execuie.

Technical specification forsynthetic resin anchorfittings to work tostrengthen reinforcedconcrete elements andstructures design andexecution.

NP 093-2003 Normativ de proiectare aelementelor compuse dinbetoane de vrste diferitei a conectorilor pentrulucrri de cmuieli isuprabetonri

Normative for design of thecomposed concreteelements of different agesand the connectors forlining and slab finishingcast

GP 081-2003 Ghid privind proiectarea iexecuia rezervoarelor micidin elemente prefabricate n zone rurale

Guidance on the designand execution of smallprefabricated tanks in ruralareas

GP 075-2002 Ghid privind stabilireacriteriilor de performan ia compoziiilor pentrubetoanele armate disperscu fibre metalice

Guidance on criteria forperformance andcompositions for concretereinforced with metal fibersdispersed

GP 080-2003 Ghid privind proiectarea iexecuia consolidrii prinprecomprimare astructurilor din beton armati din zidrie

Guidance on the designand execution ofconsolidation bypresterssing of concreteand masonry structures

NP 007 1997 Cod de proiectare pentrustructuri in cadre din betonarmat..

Design Code for reinforcedconcrete frames

P 73 1978 Instructiuni tehnice pentruproiectarea si executarearecipientilor din betonarmat beton precomprimatpentru lichide.

Technical instructions forthe design and executionof prestressed concretecontainers for liquids

P 103 1982 Instructiuni tehnice pentruproiectarea elementelordin beton precomprimatpartial, folosind armaturipretensionate sinepretensionatecomplementare.

Technical Instructions forthe design of partiallyprestressed concreteelements usingcomplementary normaland prestressedreinforcement.


36/84


P 119 1983 Instructiuni tehnice pentruproiectarea, executarea siexploatarea cailor de rularepe grinzi din beton armat sibeton precomprimat.

Technical instructions forthe design, execution,exploitation of the runingpath made of reinforcedconcrete and pre-stressedconcrete

C 155 1989 Normativ privind

prepararea si utilizareabetoanelor cu agregateusoare.

Norm on the preparation

and use of lightweightaggregate concrete

C 212 1987 Instructiuni tehnice pentruaplicarea procedeuluitehnologic de vacuumare abetonului.

Technical Instructions forthe application of theconcrete vacuumtechnology process.

C 11 1974 Instructiuni tehnice privindalcatuirea si folosirea inconstructii a panourilor dinplacaj pentru cofraje.

Technical Instructions onsetting up and usingconstruction formworkplywood panels.

C 162 1973 Normativ privindalcatuirea, executarea sfolosirea cofrajelormetalice plane pentrupereti din beton monolit lacladiri.

Norm of composition,execution using flat metalformwork for monolithicconcrete walls forbuildings.

C 181 - 1988 Indrumator pentru

metodologia de incercare aprototipurilor si seriei zerola elemente prefabricate,din punct de vedere alcomportarii la solicitaristatice.

Advisor and testing

methodology forprototypes andprefabricated zero series,in terms of behavior atstatic loading.

C 222 1985 Instructiuni tehnice privindutilizarea metodeloracustice prin soc lacontrolul calitatiielementelor prefabricate.

Technical Instructions forthe use of acousticmethods by shock forprecast elements qualitycontrol.

C 117 - 1970 Instructiuni tehnice pentrufolosirea radiografiei ladeterminarea defectelordin elementele de betonarmat.

Technical Instructions forthe use of radiography indetermining defects inconcrete elements.

C 28 - 1983 Instructiuni tehnice pentrusudarea armatu

Documents

Annex to Engineering 003-Civil Structural Design Criteria on Shore