2
Project 1 08.10.2012 Operator Telephone Fax e-Mail Room 1 / Light scene 1 / Summary 350 350 350 350 350 350 700 1050 14.00 m 0.00 0.80 1.70 2.68 3.49 4.30 5.12 5.95 6.76 7.58 8.37 9.17 9.97 10.77 11.75 12.89 8.50 m 0.00 0.89 1.35 2.45 2.84 3.36 4.04 4.45 5.18 5.77 6.62 7.01 7.47 Height of Room: 3.000 m, Light loss factor: 0.80 Values in Lux, Scale 1:110 Surface [%] E av [lx] E min [lx] E max [lx] u0 Workplane / 89 3.10 1679 0.035 Floor 90 48 3.44 1007 0.071 Ceiling 80 70 7.96 281 0.113 Walls (4) 50 53 4.00 515 / Workplane: Height: 0.760 m Grid: 128 x 128 Points Boundary Zone: 0.000 m Illuminance Quotient (according to LG7): Walls / Working Plane: 0.635, Ceiling / Working Plane: 0.792. Pure daylight scene, no luminaires involved. Page 1

Analisis Cahaya

Embed Size (px)

DESCRIPTION

Analisis Cahaya

Citation preview

  • Project 108.10.2012

    OperatorTelephone

    Faxe-Mail

    Room 1 / Light scene 1 / Summary

    350

    350

    350

    350

    350

    350

    700

    1050

    14.00 m0.00 0.80 1.70 2.68 3.49 4.30 5.12 5.95 6.76 7.58 8.37 9.17 9.97 10.77 11.75 12.89

    8.50 m

    0.00

    0.891.35

    2.452.843.36

    4.044.45

    5.185.77

    6.627.017.47

    Height of Room: 3.000 m, Light loss factor: 0.80 Values in Lux, Scale 1:110

    Surface [%] Eav [lx] Emin [lx] Emax [lx] u0

    Workplane / 89 3.10 1679 0.035Floor 90 48 3.44 1007 0.071Ceiling 80 70 7.96 281 0.113Walls (4) 50 53 4.00 515 /

    Workplane:Height: 0.760 mGrid: 128 x 128 Points Boundary Zone: 0.000 m

    Illuminance Quotient (according to LG7): Walls / Working Plane: 0.635, Ceiling / Working Plane: 0.792.

    Pure daylight scene, no luminaires involved.

    Page 1

  • Project 108.10.2012

    OperatorTelephone

    Faxe-Mail

    Room 1 / Light scene 1 / Photometric Results

    Total Luminous Flux: 0 lmTotal Load: 0.0 WLight loss factor: 0.80Boundary Zone: 0.000 m

    Surface Average illuminances [lx] Reflection factor [%] Average luminance [cd/m] direct indirect total

    Workplane 48 41 89 / / Calculation Surface 1 56 48 105 / / Calculation Surface 2 0.00 2.98 2.98 / / Calculation Surface 2 0.00 8.00 8.00 / / Calculation Surface 2 0.00 3.61 3.61 / / Calculation Surface 2 0.00 3.77 3.77 / / Calculation Surface 2 0.00 15 15 / / Floor 32 16 48 90 14Ceiling 0.00 70 70 80 18Wall 1 9.13 65 74 50 12Wall 2 0.00 76 76 50 12Wall 3 7.56 41 49 50 7.81Wall 4 0.00 4.36 4.36 50 0.69

    Uniformity on the working planeu0: 0.035 (1:29) Emin / Emax: 0.002 (1:541)

    Illuminance Quotient (according to LG7): Walls / Working Plane: 0.635, Ceiling / Working Plane: 0.792.

    Specific connected load: 0.00 W/m = 0.00 W/m/ lx (Ground area: 119.00 m)

    Page 2