Embed Size (px)
Citation preview
Structural Steel Design
An Intensive 5 Day Training Course
This course is Designed, Developed, and will be Delivered underISO Quality Standards
28 Apr - 02 May 2019, Dubai
07-A
UG
-18
WHY CHOOSE THIS TRAINING COURSE?
Steel is the most used construction material in the USA for industrial buildings, high-rise towers, bridges and other structures. It competes with reinforced concrete in the world because of its many favorable characteristics including high strength, high stiffness, ductility and toughness, speed of erection, competitive cost, etc. Its use in the Middle East region has been mostly confined to industrial plants, offshore structures and warehouses. The lower construction time and it can be used as a temporary structure make it competitive than the concrete structure.
Design of steel structures has widely been based on the Allowable Stress Design based on the AISC, BS and EC3 will be discussed. Many designers and fabricators still use the old allowable stress techniques. The course will present ASD and LRFD approach.
The petroleum industry is interesting in modify the structure in the on shore facilities to carry more load or add more machine so the integrity management of change must be considered and important. The composite section design and FRP will be presented in the course. The pushover analysis will be discussed to define the structure probability of failure for industrial structure. All example will be related to oil and gas projects in conjunction with the specification for most oil and gas companies worldwide.
This training course will feature:
It provides case studies on petroleum industry
• The codes and standard with technical practice in this field
• The new trend of integrity management system will be presented
• The design of steel structure under reciprocating and centrifugal machines
• The capability of review The engineering and pitfalls in construction
• The pushover structure analysis technique
WHAT ARE THE GOALS?
The attendees will be familiar with The steel structure design overview :
• The loads apply on The structure in oil and gas plants and petrochemical
• The modern technique on The risk based inspection for maintenance plan
• Familiar With the piperack design or review the design
• Design of the steel structure under machines• Using composite section in strengthen and repair
WHO IS THIS TRAINING COURSE FOR?
This training course is suitable to a wide range of professionals Civil engineers who are interesting in learning about steel design may attend the course.
• Design structural engineers• Supervision engineer• Planners• Steel fabricator• Construction engineers
HOW WILL THIS TRAINING COURSESBE PRESENTED?
This training course will utilise a variety of proven adult learning techniques to ensure maximum understanding, comprehension and retention of the information presented. The daily workshops will be highly interactive and participative. The illustration will depends on videos and photos.
www.petroknowledge.com
Structural Steel Design
Day One: Introduction
Competency Description: As an engineer you need to know the main element of steel structure design.
Key behaviours:
• Understand the steps of design for steel structure• Understand the different steel structure system• Understand the codes and standards
Topics to be covered:
• Introduction• Pre-Assessment• The case for steel use in construction.• Structure system• The comparison between different structure system• Define the appraise, select and define step in steel
structure projects• Available steel grades and sections.• Codes of practice for design, evolution from
allowable stress to LRFD and limit state design.• The loads effect on the industrial structures• Preparing SOR and BOD• Codes and standards
Structural Steel Design
DAILY AGENDA
Day Two: Steel Member Design
Competency Description: As an engineer you need to know the design of the main element of the steel structure.
Key behaviours:
• Understand the behaviour of steel members• Understand the steel structure system• Understand the rule of thumb steel section design
Topics to be covered:
• Selection of structural systems• Rigidly connected frames• Plane trusses• Space trusses• Design of tension members• Design of compression members.• Design of Beams• Design of Beam-Columns
QUALITYCERTIFICATION
The PMI® Registered Education Provider logo is a registered mark of the Project Management Institute, Inc.
Clear Concepts. Clean Environment.
Member of
Membership No.: 125094
Structural Steel Design
Day Three: Connection Design
Competency Description: As a structural engineer you need to know the ways of defining the loads on the steel structure in industrial structures and to know the connection design.
Key behaviours:
• Understand the loads calculation for pipe rack• Understand the types of connection• Understand the overview the differences between
the NDE methods
Topics to be covered:
• Applied load on the Pipe rack• Design of the crane track girder• Design of steel deck under vibrating machine• Bolted connections design• Example of bolted connection• Welded connections design• Example of bolted connection
Day Four: Steel Construction and Maintenance
Competency Description: As a structural engineer you need to know the ways of soil investigation and Architectural work inspection.
Key behaviours:
• Understand the construction steps• Understand the ways of QC for steel structure• Understand the design of anchor bolts• Using FRP in hotclimate
Topics to be covered:
• Fabrication and erection of steel connection• New methods for connecting steel to Concrete.• Wind bracing design• Anchor bolt design• Dynamic analysis calculation for steel skid• Using FRP in Steel structure• Fabrication and erection of FRP
Day Five: Architectural Work Inspection Guidelines
Competency Description: As an engineer you need to know the composite section design and the relation between sustainable design and integrity management systemn.
Key behaviours:
• Understand the design of composite section• Understand the IMS for steel structure• Understand the overview about the sustainable
structure
Topics to be covered:
• Design of composite beams.• Design of composite columns• Design of composite slabs• Preparation of fabrication and erection shop-
drawings• Specifying structural steel• Maintenance plan by risk based inspection
technique
Please use BLOCK CAPITALS to fill in this form. It is important that you read carefully through all information before starting to complete the form.
REGISTRATION DETAILS
AUTHORISATION
IN-HOUSE TRAINING
Family Name: ____________________________________________ First Name (Mr./Ms.): _________________________________________
Position: ________________________________________________ Company: ____________________________________________________
Mailing Address: _______________________________________________________________________________________________________
Telephone:____________________ Mobile: _____________________ Fax: ________________________ Email: ________________________
Authorisation By: ______________________________________________________________________________________________________
Position: ________________________________________________ Company: ____________________________________________________
Mailing Address: _______________________________________________________________________________________________________
Telephone:____________________ Mobile: _____________________ Fax: ________________________ Email: ________________________
Maximize your training budget and have several members of your staff, who require specific training, to attend with the advantage of not incurring additional travel costs when attending a ‘public’ training courses & seminars.
Would you like a PetroKnowledge training course delivered at a time or location to suit you? Would you like PetroKnowledge to tailor a course from our comprehensive library of programmes? Or would you like us to create an entirely new, bespoke course to suit the exact needs of your organisation?
Working in partnership with our clients, PetroKnowledge provides an enjoyable, creative learning experience that enables participants to develop their skills and knowledge. We can deliver not only generic, off-the-shelf courses from our extensive learning portfolio, but we can provide tailored as well as bespoke learning on any aspect of skill development or knowledge. Our in-house courses are conducted by the same expert trainers who conduct PetroKnowledge public courses so you can be assured they will fulfill the learning objective of any organisation
4 DATE VENUE FEE($)
28 Apr - 02 May 2019 Dubai - UAE 4,950
This fee is inclusive of Documentation, Lunch and Refreshments
Structural Steel Design
BOOKING TERMS & CONDITIONS
Booking• Bookings for courses can be made via our website (petroknowledge.
com) or by contacting our Registration Desk on +971 2 5577389 or at [email protected]
• For on-line bookings, please select the course that you require and click on the “Register Now” button, following the instructions step by step
• Upon receipt of booking in order, enrollment on the respective training course will be confi rmed by Registration Team with all necessary documentation
Invoicing and Payment• Our fees include course presentation, relevant materials, physical &
digital documentation, lunch and refreshments served during entire training. Accommodation charges are not included in the course fees
• Course fees are payable upon booking unless a valid, authorized Purchase Order is provided and accepted
• Invoices will be sent via email/courier to the ID/name and address provided
• We prefer to have the fees payment in our account before the start of training course. However, if your company has a different payment policy, the same should inform us in advance
• The currency of fees is in US Dollars (USD). Payments can be made in USD or UAE local currency AED (Arab Emirates Dirhams) either by Bank Transfer or by Credit Card. Our Bank Account details will be provided on the Invoice
• Please note that we do accept payment by cash, in USD or AED, only for the last minute bookings
Cancellation of Courses• It may be necessary for PetroKnowledge to amend or cancel any
course, course times, instructors, dates or published fees due to unforeseen circumstances and we reserve the right for such changes
• Any amendments will be advised before the course start date and any bookings already paid in full will not be subject to increased fees
Cancellation by Client• Once you have completed your booking, received your confi rmation
of enrollment and a dated payment Invoice, you are deemed to have a contract with PetroKnowledge. You reserve the right to cancel this contract given the below terms
• All cancellations must be received in writing at [email protected] and [email protected] at least 14 days prior to the training
• After the cancellation period has expired, consideration may be given, on a case to case basis, if a registered delegate nominates a substitute on the same course, shifts to next session of the course or moves to a new course
• For a cancellation request made on or before the statutory 14 day cancellation period, a refund may be given or a credit note issued which can be used against future course fees
• A 25% administration fee (of the total course fee at the time of booking) will be charged for any cancellations made outside of the statutory cancellation period
Attendance Certifi cate
• The daily course schedule should be accurately followed to ensure undeterred implementation of our training
• All delegates, who participated in their course throughout, will receive the Certifi cate of Completion on the last day
• Please report any foreseeable absences to a PetroKnowledge representative or to your sponsors directly
• An absence of three (3) or more sessions of the course will invalidate your eligibility for the Certifi cate of Completion
OFFICES:
Middle East:P.O. Box: 135120,Abu Dhabi, U.A.E.Tel: +971 2 557 7389
Europe:AB25 1HF, 1Berry StreetAberdeen, Scotland, UKTel: +44 1224 841557
USA:Pennzoil Place700 Milam, Suite 1300 - North TowerHouston, Texas 77002, USATel: +1832 871 5091
Follow us on:
