Embed Size (px)
Citation preview
an excellence in engineeringan excellence in engineering
quality products for mechanical & fluid powerquality products for mechanical & fluid power
www.jbj.co.uk/ .htmlpneumaticmotorsandstarters
pn
eu
ma
tic
mo
to
rs
an
d s
ta
rt
er
s
»harsh operating conditions.
» Reliable in damp atmospheres and extreme climatic conditions.
» Motors can be operated with air, nitrogen and other gases.
» Equipped with inlet strainer, differential pressure lubricators andadjustable speed limitation as standard. Special versions foroperation with non-lubricated air are also available.
» Integrated sound proofing can be improved with downstreamsilencers.
» Hardened and ground rotors guarantee long lifespan.
Pneumatic motors designed for permanent operations and
» Pneumatic starters used to start up diesel engines and turbines.
» High start up torque guaranteed from constructive gear wheeled
motor design particularly suitable for starting diesel engines.
» Standard options of air or gas operation, independent ofelectrical energy stores, maintenance free and explosion-proof.
» Ready to use starter systems available with all necessaryaccessories.
» Reliable, safe start up of diesel engines even under extremeenvironmental conditions, from the Tropics to the Arctic, fromthe desert to offshore!
Pneumatic Motors »
Industrial areas of application»» Smelting and rolling mill equipment.» Foundry machines.» Testing machines.» Ship building/offshore technology.» Printing and paper technology.
» Vehicle construction.
» Manipulators.
» Environmental technology.
» Mining equipment.
» Materials handling equipment.
Machine tools.
Pneumatic Starters »
PMW series »
DMO series »
Pneumatic motorsType DMO 8 - DMO 20
3displacement 880 - 2400 cm /revoperating pressure 8 bar maximum
speed up to 2000 rpmtorque 60 - 130 Nm
Pneumatic motorsType PMW 40 - PMW 530
3displacement 40 - 500 cm /revoperating pressure 10 bar max.
speed up to 20000 rpmtorque 2.3 - 43 Nm
citamuenPleehwraeg
rotom
tnemecalpsiDmc( )U
euqroTmprlanimon,rab6
napssnoituloveRgnitarepOerusserp
rewoPriA
noitpmusnoc
tratS.xam.nim
)mN(
lanimoN
)mN(
lanimoNmprnim 1-
mumixaMmprnim 1-
lanimoN mumixaM
rab6lanimon
mpr)Wk(
rab6mprlanimon
04WMP 04 8.3-5.2 3.2 00021 00002 6 01 8.2 9.3
36WMP 66 0.6-0.4 8.3 00021 00002 6 01 7.4 0.6
001WMP 99 5.8-8.5 2.5 00021 00002 6 01 6.6 4.8
061WMP 551 51-01 0.9 0003 0005 6 01 8.2 9.3
052WMP 852 42-61 0.51 0003 0005 6 01 7.4 0.6
004WMP 783 43-32 0.22 0003 0005 6 01 9.6 4.8
035WMP 615 34-03 0.72 0003 0005 6 01 5.8 0.21
» rpm adjustment by easy throttle control.
» direction change by way-valves with manual or
remote control.
» higher start-torque at max power.
» difference-pressure-oiler for permanent operation and
damp air.
» works with gas, air and nitrogen.
» special construction for operation with unoiled air.
» time-unlimited overload also at stand still.
» particularly suited for operation in explosive environment.
» solid construction guarantees high operation security.
» high life-time due to hardened and ground rotors.
» good silencing due to long exhaust ways.
» additional silencers are available.
» IEC flange and shaft dimensions according
DIN 42677 waterproofed.
» standardized flange and shaft dimensions
exchangeable with electro-motors.
citamuenPleehwraeg
rotom
tnemecalpsiDmc( )U
euqroTmprlanimon,rab6
egnardeepSgnitarepOerusserp
rewoPriA
noitpmusnoc
tratS.xam.nim
)mN(
lanimoN
)mN(
lanimoNmprnim 1-
mumixaMmprnim 1-
lanimoN mumixaM
rab6lanimon
mpr)Wk(
rab6mprlanimon
01/8OMD 388 17-26 06 0001 0021 6 8 3.6 9
21/8OMD 388 17-26 95 0021 0041 6 8 4.7 01
51/8OMD 388 17-26 75 0051 0861 6 8 0.9 21
81/8OMD 388 17-26 55 0081 0591 6 8 4.01 41
02/8OMD 388 17-26 45 0002 0512 6 8 3.11 51
01/51OMD 1341 131-511 111 0001 0021 6 8 6.11 41
21/51OMD 1341 131-511 901 0021 0041 6 8 7.31 61
51/51OMD 1341 131-511 401 0051 0861 6 8 3.61 91
81/51OMD 1341 131-511 201 0081 0591 6 8 2.91 32
02/51OMD 1341 131-511 99 0002 0512 6 8 7.02 43
01/02OMD 4932 691-071 071 0001 0021 6 8 8.71 22
21/02OMD 4932 691-071 661 0021 0041 6 8 9.02 52
51/02OMD 4932 691-071 651 0051 0861 6 8 5.42 82
81/02OMD 4932 691-071 441 0081 0591 6 8 1.72 13
02/02OMD 4932 691-071 431 0002 0512 6 8 1.82 23
»01737 767493 [email protected] www.jbj.co.uk»Further information including pdf catalogues please go to www.jbj.co.ukor contact jbj Techniques Ltd technical office
»harsh operating conditions.
» Reliable in damp atmospheres and extreme climatic conditions.
» Motors can be operated with air, nitrogen and other gases.
» Equipped with inlet strainer, differential pressure lubricators andadjustable speed limitation as standard. Special versions foroperation with non-lubricated air are also available.
» Integrated sound proofing can be improved with downstreamsilencers.
» Hardened and ground rotors guarantee long lifespan.
Pneumatic motors designed for permanent operations and
» Pneumatic starters used to start up diesel engines and turbines.
» High start up torque guaranteed from constructive gear wheeled
motor design particularly suitable for starting diesel engines.
» Standard options of air or gas operation, independent ofelectrical energy stores, maintenance free and explosion-proof.
» Ready to use starter systems available with all necessaryaccessories.
» Reliable, safe start up of diesel engines even under extremeenvironmental conditions, from the Tropics to the Arctic, fromthe desert to offshore!
Pneumatic Motors »
Industrial areas of application»» Smelting and rolling mill equipment.» Foundry machines.» Testing machines.» Ship building/offshore technology.» Printing and paper technology.
» Vehicle construction.
» Manipulators.
» Environmental technology.
» Mining equipment.
» Materials handling equipment.
Machine tools.
Pneumatic Starters »
PMW series »
DMO series »
Pneumatic motorsType DMO 8 - DMO 20
3displacement 880 - 2400 cm /revoperating pressure 8 bar maximum
speed up to 2000 rpmtorque 60 - 130 Nm
Pneumatic motorsType PMW 40 - PMW 530
3displacement 40 - 500 cm /revoperating pressure 10 bar max.
speed up to 20000 rpmtorque 2.3 - 43 Nm
citamuenPleehwraeg
rotom
tnemecalpsiDmc( )U
euqroTmprlanimon,rab6
napssnoituloveRgnitarepOerusserp
rewoPriA
noitpmusnoc
tratS.xam.nim
)mN(
lanimoN
)mN(
lanimoNmprnim 1-
mumixaMmprnim 1-
lanimoN mumixaM
rab6lanimon
mpr)Wk(
rab6mprlanimon
04WMP 04 8.3-5.2 3.2 00021 00002 6 01 8.2 9.3
36WMP 66 0.6-0.4 8.3 00021 00002 6 01 7.4 0.6
001WMP 99 5.8-8.5 2.5 00021 00002 6 01 6.6 4.8
061WMP 551 51-01 0.9 0003 0005 6 01 8.2 9.3
052WMP 852 42-61 0.51 0003 0005 6 01 7.4 0.6
004WMP 783 43-32 0.22 0003 0005 6 01 9.6 4.8
035WMP 615 34-03 0.72 0003 0005 6 01 5.8 0.21
» rpm adjustment by easy throttle control.
» direction change by way-valves with manual or
remote control.
» higher start-torque at max power.
» difference-pressure-oiler for permanent operation and
damp air.
» works with gas, air and nitrogen.
» special construction for operation with unoiled air.
» time-unlimited overload also at stand still.
» particularly suited for operation in explosive environment.
» solid construction guarantees high operation security.
» high life-time due to hardened and ground rotors.
» good silencing due to long exhaust ways.
» additional silencers are available.
» IEC flange and shaft dimensions according
DIN 42677 waterproofed.
» standardized flange and shaft dimensions
exchangeable with electro-motors.
citamuenPleehwraeg
rotom
tnemecalpsiDmc( )U
euqroTmprlanimon,rab6
egnardeepSgnitarepOerusserp
rewoPriA
noitpmusnoc
tratS.xam.nim
)mN(
lanimoN
)mN(
lanimoNmprnim 1-
mumixaMmprnim 1-
lanimoN mumixaM
rab6lanimon
mpr)Wk(
rab6mprlanimon
01/8OMD 388 17-26 06 0001 0021 6 8 3.6 9
21/8OMD 388 17-26 95 0021 0041 6 8 4.7 01
51/8OMD 388 17-26 75 0051 0861 6 8 0.9 21
81/8OMD 388 17-26 55 0081 0591 6 8 4.01 41
02/8OMD 388 17-26 45 0002 0512 6 8 3.11 51
01/51OMD 1341 131-511 111 0001 0021 6 8 6.11 41
21/51OMD 1341 131-511 901 0021 0041 6 8 7.31 61
51/51OMD 1341 131-511 401 0051 0861 6 8 3.61 91
81/51OMD 1341 131-511 201 0081 0591 6 8 2.91 32
02/51OMD 1341 131-511 99 0002 0512 6 8 7.02 43
01/02OMD 4932 691-071 071 0001 0021 6 8 8.71 22
21/02OMD 4932 691-071 661 0021 0041 6 8 9.02 52
51/02OMD 4932 691-071 651 0051 0861 6 8 5.42 82
81/02OMD 4932 691-071 441 0081 0591 6 8 1.72 13
02/02OMD 4932 691-071 431 0002 0512 6 8 1.82 23
»01737 767493 [email protected] www.jbj.co.uk»Further information including pdf catalogues please go to www.jbj.co.ukor contact jbj Techniques Ltd technical office
Dusterloh air starters with HY-TACT system »
Düsterloh pneumatic starters are used to start up diesel engines and
turbines.
The contructive design as a gear wheeled motor guarantees a high
start up torque. This technology is particularly suitable for starting up
diesel engines.
These pneumatic starters can be operated with air or gas as standard
options. They are independent of electrical energy stores,
maintenance free and explosion proof.
Supplied as ready to use starter systems with all necessary
accessories.
Reliable performance guarantees the safe start up of diesel engines,
even under extreme environmental conditions. This means that the
systems can be used everywhere from the tropics to the arctic and
from the desert to offshore areas.
Addition of the HY tact system to the standard starter ensures soft
engagement of the pinion with the engine gear rim. This system
ensures long life and reliability of the meshing gears. The start pinion
is gently pushed out to meet the engine gear rim, if the pinion does
not hit a tooth gap, it retracts and is rotated slightly
ready for the next cycle. The cycle repeats until
the pinion finds a gap and can move into full
mesh, at this point, air is switched onto the
starter to crank the engine.
notsiplaixArotom
tnemecalpsiDmc( )U
gnitratSeuqrot)mN(
riAnoitpmusnoc
m nim
erusserP)rab(
rewoP)Wk(
5.2ALD 005 35 7.9 8 8
V5.2ALD 017 08 5.31 8 31
005SP 005 35 7.9 8 8
017SP 017 08 5.31 8 31
02/42SP 058 091 0.13 51 52
02/23SP 0521 582 0.04 51 83
YH02/16SP 0632 033 0.74 01 84
YH06/32SP 0632 015 0.26 51 07
Pneumatic starterType PS500 to PS2360
displacement 500 to 2360 cm /revpressure up to 15 bar
power 8 to 70 kWtorque 53 – 510 Nm
3
Further information including pdf catalogues please go to www.jbj.co.ukor contact jbj Techniques Ltd technical office
