Embed Size (px)
Citation preview
Papers accepted for International Conference on Advances in Materials, Science and Engineering
(AMSE 2012)
Study on Springback Behavior in Creep Age Forming of Aluminium sheets
Lihua Zhan, Jianguo Lin, Minghui Huang 63
Protection Scheme for Concrete Gravity Dam Acting by Strong Underwater Shock Wave
Lu Lu, Xin Li, Jing Zhou 120
Fuzzy controlled Intelligent Multicast routing (FIMR) For Mobile Ad Hoc Networks
Anuradha Banerjee 129
Ventilation Cost Implication onto Passive Designs in Office Buildings: A Conceptual Model
Framework to compare design effectiveness between Conventional Non-Air-Conditioned and
Green Office Buildings in Malaysia
Siew Chong Chan, Adi Irfan Che-Ani, Norngainy Mohd. Tawil, Nur Akmal Goh Abdullah, Syahrul
Nizam Kamaruzzaman 176
Method for generating natural colour from false colour images based on Normalized Difference
Vegetation Index clustering
Vladimir Bulatović , Dejan Vasić, Toša Ninkov 185
Effect of Thickness on Magnetic Properties and Microstructure of CoPt L11 Metastable Films
An-Cheng Sun, F. T. Yuan, Chiuan-Fa Huang, Jen-Hwa Hsu 257
Modified Global K-Means Clustering Algorithm using Mutual Information
Chang-Woo Seo, Bo Kyung Cha, Ryun Kyung Kim, Sungchae Jeon, Young Huh, Mihyang Lee 292
General Properties of Kaolin Geopolymers
C.Y. Heah , H. Kamarudin , A.M. Mustafa Al Bakri , M. BnHussain , M. Luqman , I. Khairul Nizar ,
C.M. Ruzaidi and Y.M. Liew 312
Junction Properties of Poly (N-octyl indole)/Al Schottky Diodes
M.R Nateghi, M. Borhani Zarandi, Y. Khosravi, and A. Padargani 316
Functional Characteristics of Pneumatic Muscle Actuated Rehabilitation Equipment for the
Joints of the Inferior Limb
Tudor Deaconescu, Andrea Deaconescu 322
Analysis of the Impact of Robust Design on the Performance of a Plane Lapping System
Andrea Deaconescu, Tudor Deaconescu 323
Application of Acoustic Emission Technique to Monitor the Viscosity of Single Grade Diesel
Engine Lubricant Oil
Othman Inayatullah, Nordin Jamaludin, Mohd Jailani Mohd Nor 328
Composite Scaffolds based on Poly(caprolactone) and Chitosan for Bone Tissue Regeneration
Naznin Sultana, Tareef Hayat Khan, Masturah Mokhtar, Izzat Hossain, Farnaz Nagizadeh, Ali
Alsarhan 329
Thermal Radiation Effects on Unsteady MHD Natural Convection Flow Past an Infinite Inclined
Plate with Ramped Temperature
M. Narahari, Shaharin A. Sulaiman 333
Numerical Modeling and Simulation
Eliza Consuela Isbăşoiu 335
Hybrid WDM/OCDMA System Based on Hybrid Spectral/Spatial Coding Scheme
Isaac A. M. Ashour, Sahbudin Shaari, P Susthitha Menon, Hesham A. Bakarman, Hossam M. H.
Shalaby 336
The RDA Selection Policies
Angsumalin Senjuntichai, Huynh Trung Luong 338
Effect of Processing Parameters on the Characteristics of Al/SiC Nanocomposite Powders
Produced Via In Situ Powder Metallurgy Method
Mohammad Moazami-Goudarzi , Farshad Akhlaghi 341
Fourth-Order Time Stepping for Stiff PDEs via Integrating Factor
Zainal Abdul Aziz , Nazeeruddin Yaacob , Mohammadreza Askaripour Lahiji, Mahdi Ghanbari,
D.Ghodsiyeh 354
Microfluidics Design and Fabrication for life sciences application
Tijjani Adam1, U.Hashim1 and Foo K. L 356
Technology Development for Nano Structure Formation: Fabrication and Characterization
Tijjani Adam, U.Hashim, Foo K. L. Th. S. Dhahi and T. Nazwa 356（374）
The Effect of Milling Duration of Meta-kaolin on Self Propagating High-Temperature Synthesis
of TiB2-Mullite-Al2O3 Composite
Sutham Niyomwas, Tawat Chanadee 367
Comparison of original and sintered LUSI Mud from East Java, Indonesia as Raw Material for
Making a Geopolymer
A. R. Rafiza, A. M. Mustafa Al Bakri, H. Kamarudin , D. Hardjito, and I. Khairul Nizar 381
Review of the Characterization and Processing of Palm Ash as a Geopolymer Composite
Y. Zarina, A. M. Mustafa Al Bakri, H. Kamarudin, I. Khairul Nizar 382
Mechanical and Thermodynamic Properties of Langmuir Films of Fatty Acids
Vengadesh Periasamy1, Ng Jiun Yieng, Wan Haliza Abdul Majid 384
Study on Refractory Materials Application Using Geopolymer Processing
A. M. Mustafa Al Bakri, J. Liyana, H. Kamarudin, M. Bnhussain, C. M. Ruzaidi, A. R. Rafiza and A. M.
Izzat 385
High-temperature thermoelectric properties of Cu3In5Te9 with defect-chalcopyrite structure
Theerayuth Plirdpring, Ken Kurosaki, Atsuko Kosuga, Yuji Ohishi, Hiroaki Muta, Shinsuke
Yamanaka 387
Sintering Optimization of Ti-6Al-4V Powder Mix with Palm Stearin Based Binder Using
Grey-Taguchi Method
N. H. Mohamad Nor, M. H. Ismai, N. Muhamad, M. Ruzi, K. R. Jamaludin 393
Mechanical Performances of Fly Ash geopolymer Bricks
W. I Wan Mastura, H. Kamarudin, I. Khairul Nizar, A.M. Mustafa Al Bakri 399
Sn/Al2O3 composite as protective carbon steel coating
Adriana Samide, Bogdan Tutunaru 402
Functionalized nano-magnetic particles used for metals removals from aqueous solutions
Ecaterina Matei, Andra Predescu, Cristian Predescu, Mirela Sohaciu, Andrei Berbecaru 404
A Study of Waste, Biogas and Waste-to-Energy: A Sakon Nakhon Municipality Landfill Case
Anchasa Pramuanjaroenkij, Theerapong Payungwong, Kittipat Sudprasert, Pongsaton Kasri,
Chinnapat Thipyopas, Sadık Kakaç 406
Hybrid Composites from Silicon Materials and Nitrogenous Heterocyclic Polybases
Yury Pozhidaev, Oksana Lebedeva, Svetlana Bochkareva, Evgeniya Sipkina 412
Simple and Effective Algorithms for Air Quality Control of Building Energy Management
Systems
Shin-Yeu Lin, Wei-Yuan Chen 418
High Efficiency Organic White-Light-Emitting Diodes with Dual Electrophosphorescent Layers
G. M. Wu, H. H. Lin, K. Y. Cheng 421
Designing Efficient Chiller System by the Equal Marginal Utility Theory to Reduce Power
Consumption
Chun-Wei Chen Cheng-Wen Lee 422
RFID-Based Wireless Thermal Convection Angular Accelerometer by Using Semi-Spherical
Chamber and Xenon Gas
Jium-Ming Lin, Wen-Chen Luo, Cheng-Hung Lin, Hung-Han Lu 426
Reduction of Vibration and Noise in Air Compressor System using Design of Experiment
Method
B. A Aminudin, M. Khairul Khalid, Keequen Lee, M. Amirudin Ismail 429
Towards a greener way to modify polysulfone: solvent-free grafting of maleic anhydride in the
presence of dicumyl peroxide initiator
Athjima Homjun, Watchanida Chinpa, Damien Quémener , Ratana Jiraratananond, André
Deratani 433
Peak Amplitude Transmission on High-Rise Structure by Implementing TMD Method
M.A.Salim, A.Putra, M.A. Abdullah, A.Noordin, B.T.Tee 438
Analysis of Simple Successive Interference Cancellation Scheme in Optical CDMA Spectral
Amplitude Coding
Tawfig Eltaif, Hesham A. Bakarman, P. S. Menon, Isaac A. M. Ashour, Sahbudin Shaari 442
A Frequency-Limited Study of Chromaticity Characteristics for Reflectance Spectra
Qiao Chen, Songhua He, Xiangyang Xu ,Zhaohui Wang 443
Investigation of Poly glycidyl methacrylate –co-ethyl methacrylate (GMA-co-EMA)(90/10)-Based
Electrolytes in Lithium Battery Applications
M. Imperiyka, A. Ahmad, S. A Hanifah, , M.Y.A. Rahman 446
Ultraviolet Light Protection of Wood-Plastic Composites. A Review of the Current Situation.
Marko Hyvärinen, Olli Väntsi, Svetlana Butylina and Timo Kärki 453
Facile and Low-Cost Synthesis of Ni/NiO Catalyst by Microwave Plasma Method for Carbon
Nanotubes Growth using Plastic Waste as Carbon Source
Bussarin Ksapabutr, Tanapol Chalermkiti, Manop Panapoy 458
Production and application of synthetic lightweight aggregates using MSWI fly ash, reservoir
sediment and waste glass powder
Chao-Lung Hwang, Le Anh-Tuan Bui, Chun-Ting Lo, Kae-Long Lin 460
The Effect of Piezoelectricity on the Mineralization of Calcium Phosphate in Piezoelectric
Biomaterials
H Zarkoob, S Ziaei-Rad, M Fathi, H Dadkhah 466
Extraction of Small Blocks of Power nearby Transmission Lines
Eden L. Carvalho Jr. , G.ermano Lambert-Torres, Erik L. Bonaldi, Levy E. L. de Oliveira, Jonas G.
Borges da Silva,Thiago. G. Rotella, Luiz Eduardo Borges da Silva 472
Influence of NaNO3 and NaCl on Copper Removal from Aqueous Solutions by Natural Zeolite
Tomáš Bakalár, Henrieta Pavolová, Milan Búgel 475
A New Heuristic Approach for Inverse Kinematics of Robot Arms
Tuğrul Çavdar, M. Mohammad R. Alavi Milani 481
Modeling, Simulation and Verification of Parameters Study on Flexible Automotive Wiper
M.A.Salim, M.A.Abdullah, A.Noordin, K.Jusoff, M.Z.Md Zin 487
Effect of Mixing Parameters on the Flexural Strength of CNTs/G/EP Nanocomposites
Using Taguchi Method
Hendra Suherman, Jaafar Sahari, Abu Bakar Sulong 494
Terrain classification strategy of a quadruped robot for gait transition and adaptation in a field
terrain
Seung-Nam Yu, Kwang-Jin Ko, Ki-Sung Kim, Wan-Soo Kim 505
Experimental Study on Electrostatic Field of Polymer Powders in Freeboard Region of Fluidized
Bed Reactor
Kwangseok CHOI, Sungchul KIM, Jaehee CHUNG 518
The Design of Vehicle Active Front Steering based on Steer by Wire System
Sheikh Muhamad Hafiz fahami, Hairi Zamzuri,Saiful Amri Mazlan, and Noraishikin binti Zulkarnain
519
Correlation and Regression Studies of Indoor Environmental Quality (IEQ), Human Productivity,
Comfort and Stress Level in Office Buildings
Naziatul Syima Mahbob, Syahrul Nizam Kamaruzzaman , Naziah Salleh , Raha Sulaiman 520
Design Parameters Investigation of Single Mode Silicon-on-Insulator (SOI) Microring Channel
Dropping Filter
Hazura H., Sahbudin Shaari, P.S. Menon, B.Y. Majlis, Mardiana B., and Hanim A.R 522
A prototype framework of Information Technology Infrastructure Flexibility Maturity Model
(ITIF-MM)
Nurshuhada Zainon, Hafez Salleh, Faizul A. Rahim 524
Effect of microstructural and physical mechanisms on mechanical properties of single-phase
steels
Gérald Franz, Farid Abed-Meraim, Tarak Ben Zineb 525
Influences of Light Coupling Techniques to the Excitation of Surface Plasmon Polaritons
Wan Maisarah Mukhtar, Sahbudin Shaari, and P. Susthitha Menon 536
Forming of 3D Fabric Surface with the Help of Gradient Fields and Detection of the Pills
Lenka Techniková, Maroš Tunák and Jiří Janáček 539
Preliminary Tests for a Multi-Functional Bridge Bearing with Built-in Piezoelectric Material
Jinkyo F. Choo, Dong-Ho Ha, Nam Seo Goo, Won Seo Jang 540
Py-GC-MS Assessment of Low-Concentration Sarcosine in Water Based Samples
Takuma Nozoe, Roman Selyanchyn, Hidetaka Matsui, Seung-Woo Lee 542
Microwave induced plasma synthesis and characterization of rice kernel-like Bi2Te3 crystals
Tawat Suriwong, Somchai Thongtem, Titipun Thongtem 543
Influence of Gas Flow Rates on the ZnO Thin Films Formation and It’s Photoluminescence
Property
Karkeng Lim, Muhammad Azmi Abdul Hamid, Roslinda Shamsudin & Azman Jalar 545
Proposal for Directions of Korea Building Code in the Era of Sustainability
Sanghoon Park Sungwoo Shin Hyeonku Park Cheonghoon Baek Hanseung Lee Kyung-Koo Lee
548
Using 3D terrestrial laser scanning technology to obtain 3D deliverables
Didulescu Caius, Savu Adrian, Badea Gheorghe, Badea Ana Cornelia 550
LIBS in analyses of chromium in nanofiber structures
Jakub Wiener, Mária Průšová, Denys Levchenko 559
Parallel Manifold Header on Foam Material Basis for Vacuum Tube Solar Collectors
Radim Rybár, Dušan Kudelas, Jana Horodníková, Martin Beer 560
Process optimization in glass polishing based on a material removal model
Gianpaolo Savio, Roberto Meneghello, Gianmaria Concheri, Luciano D'Angelo 563
Optical properties of spectacle lenses computed by surfaces differential quantities
Gianpaolo Savio, Roberto Meneghello, Gianmaria Concheri 563（565）
Meso-porous catalytic membrane contactors applied for organic oxidation in salty water
Izumi Kumakiri and Rune Bredesen 566
Hydrophobic nanofiber layers
Roman Knizek, Jakub Wiener, Oldrich Jirsak, Ludmila Fridrichova, Vladimir Bajzik 567
Syngas Combustion: Analysis of Exergy Losses
Valter Silva, Nuno Couto, J.L. Alexandre, Abel Rouboa 569
Influence of different additions on frost-thaw and chemical resistance of polymer concrete
Maria Harja, Marinela Barbuta 570
Photon irradiation and modification of chitosan-coated ferrofluid
Kwo-Ping Chang, Ting-Yi Jian, Lung-Sheng Sung, Zhi-Yuan Lin, Hong-Yi Chen, Mao-Chin Hung,
Yu-Huang Chien 576
Determination of Noble Metals in Rocks and Ores Using Adsorbent pstm-3t
Yury Pozhidaev, Natalya Vlasova, Irina Vasilyeva, Mihail Voronkov 578
Considerations On Topographic Monitoring Of The Stability Of Underground Mining Spaces
Used For Waste Management
Ovidiu Stefan 580
Research of joining SiO2 ceramic material by use of active solder
Roman Koleňák, Michal Chachula 583
Ammonia Gas Detection Using an Optically Sensitive Hybrid Organic-Inorganic Multilayer
Nanoporous Film
Wataru Yasukochi, Tao Wang, Suguru Kodaira, Sergiy Korposh, Roman Selyanchyn, Seung-Woo
Lee 588
Evolution of the Surface Quality in the High Speed Milling of Aerospace Aluminum Alloys
Jorge Salguero, Moises Batista, Daniel Garcia-Jurado, Antonio J. Gámez, Mariano Marcos 596
Influence of Structure of Material on Properties of Bending Rigidity and Creasing in Different
Directions
Ludmila Fridrichová, Katarína Zelová, Roman Knížek 597
The Noise Analysis of Construction Machinery and Equipment in a Campus Development Project
Hsin-Yun Lee 600
Optimizing the Modulation Efficiency of SOI-based Optical Phase Modulator
Mardiana B, Sahbudin Shaari, P. S. Menon, Hazura H, Hanim A.R, N.Arsad and H. Abdullah 601
Synthesis, Thermal and Magnetic Properties of the Magnetically Frustrated CoNb2O6
Compound
Viorel Sandu*, Mirela Sidonia Nicolescu, Marian Gabriel Banciu, and Ion Ivan 604
Effect of different capping agents on the undoped ZnS semiconductor nanocrystals :Synthesis
and Optical and Structural characterization
A. Rahdar 605
Dependence of Micro-Crack Propagation on Different Type of Non-Linear Matrix Used in
Particulate Composite
Zdeněk Majer 608
Quality Management Tools for Customer Satisfaction in Service Industry
A.A. Faieza , M. Ghazizadeh 610
Identification of Barriers in Production Line Installation for Packaging Industry using Delphi
Method
A.A. Faieza and M.S. Omid 610(E239)
Principal Components Based Analysis of Surface Quality of Horizontal Turned Samples
F. F. Ancio, A.J. Gámez, J. Salguero, M. Batista, M. Marcos 611
Comprehensive expression of durability for the selected cutting tools in comparison
with standard ISO 3685
Ján Duplák, Imrich Orlovský, Matúš Čuma 612
Closed-Form Analytical Solution for Creep Stresses of Pressurized FGM Thick Spherical Shells
Mohammad Zamani Nejad, Zahra Hoseini, Tahereh Taghizadeh, Abbas Niknejad 617
Programming CNC Machines using CAM Software
Peter Michalik, Jozef Zajac, Michal Hatala 619
Crashworthiness Determination for Front and Rear Doors and B Pillar Subjected to Side Impact
Crash by a Mobile Deformable Barrier
A.H. Lilehkoohi, A.A. Faieza, B.B. Sahari, A.A. Nuraini , M. Halali 621
Effect of Material on Crashworthiness for Side Doors and B Pillar Subjected to Euro NCAP Side
Impact Crash Test
A.H. Lilehkoohi, A.A. Faieza, B.B. Sahari, A.A. Nuraini , M. Halali 622
Effect of Material and Thickness of Side Doors And B Pillar on Crashworthiness in Euro NCAP
Side Impact Crash Test
A.H. Lilehkoohi, A.A. Faieza, B.B. Sahari, A.A. Nuraini , M. Halali 623
The effect of shear flow on the formation of L2 droplet during directional monotectic
solidification
J.Y. Wang, W. Zhai, H. Xing, K.X. Jin, C.L. Chen 624
Discovering technological strategies through patent analysis: insights from the optical memory
industry
Corrado lo Storto 626
Improvement of Pierce-Smith Converter Performance and Reduction of Splashing Using SPH
Method
A.H. Lileh Koohi 1, Mohammad Halali1, Masood Askari 627
Crashworthiness improvement of different tubular structures using tailor welded blanks
Vlad Andrei Ciubotariu 629
Improvement of mechanical properties of mortar reinforced by cold plasma treated
polypropylene fibres
Daniel Kopkáně, Lenka Bodnárová, Rudolf Hela, Jiří Brožovský, Vít Petránek 631
Effect of Ground Conditions on Microbial Cementation
Daehyeon Kim, Kyungho Park, Dongwook Kim 633
Injection Effect of Bio-Grout for Soft Ground
Daehyeon Kim, Kyungho Park 633（634）
Method for Improving Settlement and Consolidation Rate of Dredged Soils Using Bacteria
Daehyeon Kim, Kyungho Park, Myung Sagong 633（635）
Memory Access Reduction for FPGA-SURF Implementation
Mohd. Yamani Idna Idris, Hamzah Arof, Noorzaily Mohamed Noor, Ainuddin Wahid Abdul Wahab
636
Low-Temperature and Facile Fabrication Method of Dense Gd0.1Ce0.9O1.95 Electrolyte Thin Films
by Electrostatic Spray Deposition: Effects of Solvent Ratio and Deposition Temperature
Manop Panapoy, Tanapol Chalermkiti, Bussarin Ksapabutr 639
IRIS – An Uncorrelated Rotational Invariant Binary Descriptor
Zhi Xuan Lew, Mohd. Yamani Idna Idris, Noorzaily Mohamed Noor, Emran Mohd. Tamil 640
Brainwave Analysis during Learning
Fu-Chien Kao, Yun-Kai Lin, Chia-Chun Hung 644
Removal Cu(II) Ions in an Aqueous Solution Using Electrosprayed Chitosan Nanoparticles
Doan Van Hong Thien, Sheng Wen Hsiao, Ming Hua Ho 655
Synthesis, Characterization and Catalytic Fast Pyrolysis of Jatropha Waste over Synthesized
NaZSM-5 and HZSM-5 zeolites
Supawan Vichaphund, Duangdao Aht-Ong, Viboon Sricharoenchaikul,Duangduen Atong 658
STOWAR: Selective Event Notification System for UCM Users
Mi-Hyang Lee, Changwoo Seo, Donglim Kim, Eunyoung Kim, Euiseon Kang, Younghwan Lim 659
Robust Digital Control for a PFC Boost Converter Using Two Approximate 2DOF Controllers
Yuji Fukaishi, Yuto Adachi and Kohji Higuchi 661
Modelling, Analysis, and Simulation of manufacturing processes with alternative structural
configurations by parametric Petri nets
Juan-Ignacio Latorre-Biel,Emilio Jiménez-Macías 665
Optimal Injection-molding Conditions for Mechanical Properties of Kenaf Fiber Composite
Materials by Taguchi Method
Xiaohang Tuo, Takahiko Kawai, Shin-ichi Kuroda 666
Reduction and sintering of copper nano-particles by non-equilibrium atmospheric pressure
plasma jet
Guiling Zhang, Katsuhiko Hosoi, Shin-ichi Kuroda 666（710）
Molecular Mobility and Mechanical Properties of Novel Clay / Waterborne Polyurethane
Nanocomposites
Hsu-Chiang Kuan, Aravind Dasari, Zhong-Zhen Yu, Jun Ma, Yiu-Wing Mai and Chen-Chi M. Ma
667
Effect of Modification Method and Processing Condition on the Properties of Multiwall Carbon
Nanotube / ABS Nanocomposite
Chen-Feng Kuan, Kun-Chang Lin, Chin-Lung Chiang,Chia-Hsun Chen, Hsin-Chih Peng and
Hsu-Chiang Kuan 667（671）
Effect of the Compatibilizer in the Multiwall Carbon Nanotube / Super-toughened
Polycondensation Polymer Nanocomposites
Hsin-Chih Peng, Chin-Lung Chiang, Kun-Chang Lin, Chia-Hsun Chen, Chen-Feng Kuan and Hsu-Chiang
Kuan 667（680）
Damage Detection in Static Beams via Wavelet-Based Technique
S. Asnizah, M. Pauziah, B.A. Aminudin,A.Hanida, J.Y. Lee 679
Finite Element Studies of Creep Behavior of Concrete-Filled Steel Tubular Columns Under
Compression at High Temperatures
Gia Bao Dinh , Yun-Che Wang 688
Analysis of Roughness and Microstructure for High-Power Laser Cutting of Stainless Steel
Imed Miraoui, Emna Elimi, Mohamed Boujelbene, Emin Bayraktar 689
Analysis the Electrical Properties of Diode at Low Dose X-ray Irradiation
Itsara Srithanachai, Surasak Niemcharoen 698
Adaptive Recurrent Wavelet Neural Network Integral Backstepping Control of PMLSM Drive
Chih-Hong 701
Advanced Material Evaluations and Considerations for Electrostatic Control in Electronic Device
Manufacturing
Anusorn Chakkaew, Chaba Suriya-amaranont, Assoc. Prof. Dr. Wisut Titiroongruang 705
Moldability and Quality of Polylactic Acid (PLA) Packaging Produced by Injection Molding and
Injection Compression Molding
Patcharee Larpsuriyakul, Natcha Prakymoramas, Dumrong Thanomjitr,
Suparada Santanipat, Jitphisut Kitpaiboonvong, Arunwan Sutaksina 708
Fuzzy Logic Algorithm for Quantifying Clinical Effectiveness of Genitourinary Patient-Controlled
Analgesia Services
I-Ting Kuo, Kuang-Yi Chang, Mei-Yung Tsou, De-Fong Juan, Steen J. Hsu, Chia-Tai Chan 715
The Electrical and Structural Characteristics of CIGS Thin Films Prepared by Sol-Gel Method
Ming-Jer Jeng, Jian-Wun Chen, and Walters Cheng 717
Hardware Implementation of the reflective mirror micro projector
Ming-Jer Jeng, Yu-Hsuan Lin , Jia-xian Liao 723
The Decorative Symbols of Taiwan Traditional Architectural Ceramic Material- A case study on
Kin-Men Ancestral Temples
Wen-Chang Kuo, Chih-Kao Nieh , Kuang-Sheng Liu 725
Performance Optimization of Optical Y-junction on Silicon-On-Insulator for MZI applications
Hanim A.R., Sahbudin Shaari, Menon, P.S, Hazura H. and Mardiana B 727
A rule-based neuro-fuzzy stock trading decision support system using technical analysis
Monruthai Radeerom, M.L. Kulthon Kasemsan 729
Efficient Quality Control in Stereoscopic 3D Image by Interaxial Distance Equation
Seong-Mo An, Wan-Young Chung 738
Rheological Behaviour to Cone Penetration of Dough from Different Wheat Flour Types
Gheorghe Voicu, Elena-Madalina Stefan, Gabriel-Alexandru Constantin, Sorin-Stefan Biris, Gigel
Paraschiv 741
Fabrication and Characterization of 0.67Pb(Mg1/3Nb2/3)O3-0.33PbTiO3 Ceramics Prepared via
Combustion Technique
Chittakron Kronphom, Theerachai Bongkarn 745
Study and Experiment of Smart Robotic Drilling for Laminated Composites and Titanium Alloy
Peijiang Yuan, Maozhen Gong, Fucun Ma, Leibin Yu, Hongwen Xing, Wen Huang, Liheng Shen
746
3D Image Quality Evaluation Model in Stereoscopic Imaging Technology
Wan-Young Chung, Rohit Ramesh, Shin-Il Jeong, Gi-Sik Byun 748
Soil Moisture SensorCharacterization using FR4 Technology
H.Mamat, N.F.A.Rahim, M.Z. A Wahab, A.Jalar 750
Implementation of Multi-Axis Motion Controller by FPGA-Based Hardware Design
Ming-Jer Jeng, Pin-Yang Kang, Zheng-Hung Gao 751
Microstructure Evolution and Characterization of Annealed CdTe/CdS Thin Film on ITO
Substrate by Electro-deposition Technique
Chen Hsu, Shih-hao Cheng 752
An Improvement of Forward Current of P-N Diode using Soft X-ray Method
Poopol Rujanapich, Itsara Srithanachai, Surada Ueamanapong, Amporn Poyai, Surasak
Niemcharoen, Wisut Titiroongruang 757
Designing and Simulation of Optoelectronic Devices using SYNOPSYS TCAD
M. Azam, S. Riaz and S. Naseem 765
Decentralized Fuzzy Control System with Steady-state Decoupling and Self-optimizing Scheme
Qiang Fu, Yi-zhe Zhang 769
Effects of Ultraviolet Illumination on Sol-gel Synthesized Al-doped ZnO Thin Films
S. Shaari, A. R. A. Rashid, P. S. Menon, N. Arsad 770
Study of impact ionization in the 3D FinFET structure by varying channel doping concentration
at higher temperature using SYNOPSYS TCAD
A. Bukhtiar, M.A. Mustafa, M. Umer, M. Khalid, S. Riaz and S. Naseem 772
Enhanced Silicon Bandgap by Platinum Diffusion for UV Detector
Surada Ueamanapong, Itsara Srithanachai, Narin Atiwongsangtong, Nipapan Klunngien, Amporn
Poyai, Surasak Niemcharoen 776
High Temperature Tribological Characterization of Ti-Based Coatings on HastelloyX
Karuna Tuchida, Kessaraporn Wathanyu , Surasak Surinphong 777
Design and Development of a Portable Superbike Paddock Stand using CAD and CAE Tools
Mohd Hafiz Mohd Noh, Nik Mohamad Amirudin Nik Lah, Helmi Rashid, Ahmad Hussein Abdul
Hamid, Abdul Halim Abdullah 785
Comparison study of impact ionization for FinFET and FD SOI device by using TCAD
Arfan Bukhtiar, M. A. Mustafa, M. Umer, M. Khalid, Saira Riaz and Shahzad Naseem 789
The Effect of Double Sided Gas Metal Arc Weld with ER4043 and ER5356 Filler Metals on AA
6061-T6 Plates
Syed Roslee Sayd Bakar, Azman Jalar 793
Control Circuit Design for Sensing Microgripper
P. Phan Huu, T. Chu Duc 794
FEM Modelling of Continuous Extrusion of High-Strength Metals Using Commercial Conform(TM)
Machine
Michal Zemko, Josef Hodek, Libor Kraus, Jaromir Dlouhy 795
Improved Calculations for X-ray Reflectivity on Surfaces and Interfaces
Yoshikazu Fuji 796
Theoretical Investigation of Breakdown Voltage in Normally-On 4H-SiC VJFET
Muhammad Khalid, Saira Riaz, and Shahzad Naseem 797
The influence of the TWB’s thickness ratio on the welding line displacement during forming
process
Albut Aurelian 798
Bioplastic Nanocomposite Prepared from Acrylated Epoxidized Soybean Oil-PMMA Copolymer
and Nano-Titanium Dioxide
Pimchanok Saithai, Jerome Lecomte ,Eric Dubreucq3, and Varaporn Tanrattanakul 799
Optical and Structural Properties of Evaporated ZnxCd1-xS (0x1) Thin Films
Saira Riaz, A. Sajid, M.A. Jamil and Shahzad Naseem 808
Development of Durability and Load-Bearing Capacity Evaluation System for Concrete
Structures
Byoung Han Choi, Jun Gu Lee , Seog Yeol Kim 811
Optical Properties of CdTe Films Prepared by Centrifugal Coating Technique
Shehla Honey, M. Tariq Bhatti, Saira Riaz and Shahzad Naseem 820
Influence of the Constitutive Equations on the FLC Prediction
Liana Părăianu, Dan Sorin Comşa, Dorel Banabic 827
The Intelligent Manufacturing Systems
Radovan Holubek, Peter Kostal 829
Efficient resin distribution channel for the design of resin infusion processes using geometric
methods
Nicolás Montés, Fernando Sánchez, Ubaldo Pineda 832
Parametric Potential Model for Determining the Microgeometrical Deviations of Horizontally
Dry-Turned UNS A97075 (Al-Zn) Alloy
F.J. Trujillo, L. Sevilla, J. Salguero, M. Batista, M. Marcos 835
A Study of PVD Deposited FeO Thin Films for Magnetic Applications
Saira Riaz, Sidra Farooq and Shahzad Naseem 836
Physical and Thermal Properties of Polyurethane from Isophorone Diisocyanate, Natural
Rubber and Poly(-caprolactone) with High NCO:OH content
Wannarat Panwiriyarat, Varaporn Tanrattanakul, Jean-François Pilard,Pamela Pasetto and
Chuanpit Khaokong 837
Structural, Electrical and Magnetic Properties of Iron Oxide Thin Films
Saira Riaz, Aseya Akbar and Shahzad Naseem 841
Optical and Structural Properties of ZnO Thin Films for Solar Cell Applications
M. Saeed Akhtar, Saira Riaz, Rabia Noor and Shahzad Naseem 848
Structural and Optical Properties of Sol-Gel derived Zn1-xMnxO Thin Films
M. Saeed Akhtar, Saira Riaz, S. Sajjad Hussain and Shahzad Naseem 851
Comparison Study on Shear Strength and IMC for SAC and Polymer Core Solder Balls
Dr. Yap Boon Kar, Dr. Agileswari, Tan Cai Hui, , Noor Azrina Talik 857
Effect of Synthesized Parameters on Biphasic Calcium Phosphate Nanopowders Prepared from
Chicken Eggshells
Piyapong Pankaew, Pattarinee Klumdoung, Ekachai Hoonnivathana 863
Investigation on NiCrSiB Coating via HVOF Spraying
Nor Bahiyah Baba, Hafiz Mustaqim Mohd Sapie 867
Digital design process and additive manufacturing of a configurable product
Piili Heidi, Widmaier Thomas, Happonen Ari, Juhanko Jari, Salminen Antti, Kuosmanen Petri,
Nyrhilä Olli 868
Preparation of iron oxide ionic ferrofluid and study its magnetic and rheological properties
Hossein Asnaashari Eivari, Zihab Sohbatzadeh, Abbas Rahdar, Hadi Arabi 870
Guided Modes of Slow Photon in Silicon Photonic Crystal Waveguide with Honeycomb Lattice
W. Amorntep, P. Wanchai 877
Three-dimensional (3D) Bio-Cad Modeling of Human Knee
Hacene Ameddah, Mekki Assas 878
Towards a Quality Monitoring to Control the Degree of Cure in the Manufacturing of Composite
Parts
U. Pineda, N. Montés, F. Sánchez, F. Bensadoun, E. Ruiz 885
An application of grey relation TOPSIS to evaluate travel TV program: a case of Cambodia tour
planning with the theme of dark tourism
Chih-Fu Hsu 886
Strength Analysis of Combined Section of Improved CIP Wall
Seung-Hun Kim, Sam-Young Noh, Kap-Soo Kim, Wang-Hee Lee and Sol Youn 890
Texture development and mechanical behaviors of extruded AZ61 magnesium alloys
J. S. Park, J. M. Kim 891
Analysis of the Pine Biomass Gasification to Obtain H2 Enriched Syngas
Valter Silva, Nuno Couto, J.L. Alexandre, Abel Rouboa 918
H2 Production from Steam Gasification of Palm Kernel Shell in the Presence of 5% Ni/BEA and
5% Fe/BEA Catalysts
Anita Ramli, Siti Eda Eliana Misi, Mas Fatiha Mohamad, Suzana Yusup 922
Synthesis and Characterization of Mo/γ-Al2O3-MgO Mixed Oxide Catalysts
Anita Ramli, Muhammad Farooq 922（923）
Computational Study of the High Temperature Heat Transfer Coefficient for Different Cutting
Fluids
Wisansart Satana, Karuna Tuchinda, Anantawit Tuchinda, Surachet Chutima 925
Call for standardization in material behavior assessment systems output formats
Vencel Biró, Dorel Banabic 927
Effects of Interference Screw Lengths on the Primary Stability of Anterior Cruciate Ligament
Reconstruction
Abdul Halim Abdullah, Muhamad Fauzi Othman, Helmi Rashid, Jamaluddin Mahmud, Alias Mohd
Saman, Ahmad Zainalabidin Zolkepli 930
Interior Materials Impact to Indoor Air Quality
Tomáš Tomčík, Ingrid Šenitková 933
Crack Detection in Underground Pipelines Using Piezoelectric Sensors
Mohammad Mehdi Nozarian, Hamed Adeldost, Abolghassem Zabihollah 951
Polypropylene/TiO2 Nanocomposites: Study on Mechanical and Structural Properties
Giang Vu Nguyen, Hoang Thai, Mai Duc Huynh , Trung Huu Tran , Cong Van Do , Tuan Manh Vu ,
Lam Dai Tran E238
Ion – Beam Deposition of Carbon Nanofilms on Silicon Substrate
M.T. Gabdullin, T.S. Ramazanov, S.A. Orazbayev, D. Batryshev, M.K. Dosbolayev, M. Silamiya
E242
Kinetic Parameters of Cement Paste
N.Bentaieb, D.Touil, F.R.Zirour, A.Lachemet, S.Belaadi E248
Preparation and Characterization of Coating Turmeric-Coconut Oil Nanoemulsion with
Modified Sodium Alginate
Sa-Ad Riyajan,, Janthanipa Nuim E253
Reactor Stirring System Optimization Parameter Analysis by Using Computer Simulation and
Taguchi Method
Yulieh Wu, Szotso Li, Weiyen Chuang E254
Turning of Composite Material with Organic Reinforcement (Wood Plastic Composite)
Zuzana Hutyrová, Jozef Zajac E258
Breathing crack detection using sub-harmonic component with nonlinear boundary condition
Wenzhong QU , Li XIAO, Yanguo ZHOU E264
Dynamics-dependent Adsorption of Silver Atoms on Si Surface
Xiaoqing Liu, Xinli Du, Feng Chen, Xiu Chen, Yuyu Wu, Li Wang E268
A Novel Dual Parallel SVM Algorithm for Audio Classification based on Genetic Algorithm
Xiaoqing Yu, Yunhui Wang, Wanggen Wan (IEEE Senior Member), Mengyao Zhu, Huanhuan Liu,
Junwei Liu E280
Modeling of stress in spherical joints in unfavourable positions
A. Beranoagirre E288
Rapid Finishing of Free Form Surfaces Using Milling Machine and Spherical Robot
José Antonio Dieste Marcial, Angel Fernandez Cuello , David Roba Fontán E289
A Fast Way to SimulatetheMulti-layered Heat TransitiononV-R-C CircuitTechnology
Je-Ee.Ho, Da-Chih.Chen E291
On the initial design and analysis of the material flow at an intelligent manufacturing cell:
benefits of the use of simulation
Daynier Rolando Delgado Sobrino,KarolVelíšek E292
