Ametek

A c o m p a n y p r o f i l e

. . .because calibration is a matter of confidence

A M E T E K C a l i b r a t i o n I n s t r u m e n t s

Food

Energy

Pharmaceuticals

Beverages

W h y c a l i b r a t e ?

Fresh food, cold beverages, effective medicines ...

When buying a product, few people spare a thought for the industrial processes involved in their manufacture or their transportation.

Food and beverages must be produced and stored at certain temperatures to maintain their quality. The same applies to pharmaceuticals.

During transportation to distribution points and the consumers, products also need to be contained under certain specified conditions.

At the same time, energy must be saved. It is vital, that companies reduce their over-consumption and pollution levels without compromising the performance of their process and product quality.

The demand for better quality control, increased production efficiency and reduced energy consumption has therefore never been greater. Furthermore, process control applications must be optimised to operate accurately - all day, every day.

� www.ametekcal ibrat ion.com

AMETEK Calibration Instruments maintains accuracy while you maintain your processes.

B e h i n d e v e r y g r e a t p r o c e s s i s a h i g h a c c u r a c y c a l i b r a t o r

Transportation

Power

Chemicals

Marine

Based on the demands for better quality control, increased production efficiency and reduced energy consumption in a wide variety of industrial processes, temperature and pressure must be accurately controlled. Data from the applied measuring equipment however does not always provide the required accuracy to the process.

Before the measuring equipment can accurately control the process, the equipment itself must first be measured accurately. This is important since data from temperature and pressure instruments directly affects the quality of the products produced, the efficiency of production processes, and the quality of the products delivered to the customer.

As a result, a growing number of industry customers are requesting calibration of their in-process measuring equipment and even of their own calibration equipment.

AMETEK Calibration Instruments offers a complete programme of instruments for calibration providing the highest measuring accuracy ...

�www.ametekcal ibrat ion.com


At AMETEK Calibration Instruments, we work closely with our customers to develop even better instruments to meet their calibration needs.

I n n o v a t i v e i n s t r u m e n t s m e e t i n g c u s t o m e r n e e d s

AMETEK Calibration Instruments invented the first ”floating ball” deadweight tester for pressure calibration back in the 1960s and the first temperature dry-block calibrator back in the early 1980s.

Ever since, we have continued to develop innovative and easy-to-use calibrators to meet the new requirements within process and quality control, where the demand for faster calibration instruments with higher accuracy and better stability is increasing.

Our R&D departments consist of highly skilled, experienced engineers and software developers who monitor new technologies and work closely with customer contacts to develop even better calibrators that satisfy our customers’ calibration needs.

We have the commercial and technological know-how that are the hallmark of a leading global manufacturer and developer of calibration instruments for temperature, pressure and process signals as well as temperature sensors.

Our main brands are JOFRA for calibration instruments, FP for temperature sensors and M&G for deadweight testers.


JOFRA / JF Marine Instruments

A complete range of calibration equipment for temperature, pressure and signal, approved for marine use.

FP Temperature Sensors

A complete range of temperature sensors for industrial and marine use.

M&G Pressure Testers

Pneumatic floating-ball or hydraulic piston deadweight testers - easy-to-use with accuracies up to 0.015% of reading.

M&G Pumps

Pressure generators from small pneumatic “bicycle” style pumps to hydraulic pumps generating up to 1,000 bar (15,000 psi).

JOFRACAL Calibration Software

Advanced calibration software with documenting functions for temperature and pressure calibration.

A c o m p l e t e r a n g e o f c a l i b r a t i o n i n s t r u m e n t s

JOFRA Temperature Instruments

Portable precision thermometers. Dry-block and liquid bath temperature calibrators: 4 series, with more than 25 models and temperature ranges from -90° to 1205°C / -130° to 2200°F. All featuring portability, accuracy and speed.

JOFRA Pressure Instruments

Convenient electronic systems ranging from -1 to 1,000 bar (25 inHg to 14,500 psi) - wide choice of pressure ranges, pumps and accuracies, fully temperature-compensated for problem-free and accurate field use.

JOFRA Signal Instruments

Process signal measurement and simulation for easy control loop cali-bration and measurement tasks. From handheld field instruments for multi or single signals to laboratory reference level bench top instruments.



AMETEK Calibration Instruments has its headquarters in Denmark and consists of two production facilities: AMETEK Denmark A/S which is based in Allerød, Denmark, and Mansfield & Green based in Largo, Florida, USA. Both locations have R&D, production, sales, and service facilities.

With our extensive experience of developing and producing calibrators and industrial temperature sensors, and broad knowledge of applications and customer needs, we can assist our customers with product specifications, application support, ordering and especially after-sales support.

Our instruments are sold worldwide but we combine our global approach with a local touch, as we operate through a worldwide network of sales and service offices as well as more than 60 committed and long-established distributors.

All our local sales and service teams are very experienced, always willing to help and support our customers with any questions they may have about equipment from AMETEK Calibration Instruments.

Whatever the application or location, AMETEK Calibration Instruments will support your calibration requirements through an extensive network of experienced sales and service professionals providing support worldwide.

W o r l d - w i d e r e p r e s e n t a t i o n


AMETEK Denmark A/S

Headquarters for AMETEK Calibration Instruments.Responsible for sales, support and service globally.Manufacturer of JOFRA calibration instruments and FP temperature sensors.

AMETEK GmbH

Responsible for sales, support and service in Germany.

AMETEK Lloyd Instruments

Responsible for sales, support and service in the UK.

AMETEK Singapore

Responsible for sales, support and service in Singapore.

AMETEK China

Local offices in Beijing and Shanghai. Responsible for sales, support and service in China, Taiwan and Vietnam.

AMETEK Mansfield & Green

Responsible for sales, support and service in North America. Manufacturer of the M&G deadweight testers and pumps.

G l o b a l c o m p a n y - l o c a l s a l e s a n d s e r v i c e

Distributors

More than 60 distributors responsible for sales, support and service worldwide.



As an experienced and leading developer of calibration instruments, our main concern is to manufacture and deliver high-quality instruments – quality without compromise.

Our calibration instruments are designed and manufactured in ISO 9001 certified facilities.

Prior to shipment, strict functional tests verify instrument performance specifications in various environmental and operational conditions. Our products are calibrated against traceable reference standards using internationally accepted metrology procedures. Certificates are issued to document the calibrator’s compliance with performance specifications, traceability and measurement uncertainty.

Our strict quality policy ensures constantly high quality in all our products and services. To support this we:

• Develop processes that produce products and services in compliance with customer and market expectations, needs and demands

• Measure and survey process results, e.g. customer satisfaction, to ensure our quality control and that processes continue to improve

• Update documentation to ensure that processes comply with requirements

Q u a l i t y w i t h o u tc o m p r o m i s e


Our vision is to “Become the supplier of choice in temperature and pressure calibration instruments by providing our customers with technical expertise, service and advanced easy-to-use products.”

Our main focus is on our customers and their calibration needs, but we also attach great importance to our employees and the community around us based on the following values:

• Building partnerships with our customers by providing world-class products and services

• Forming business partnerships based on fairness and integrity that benefit our customers and distributors

• Treating our employees with respect, offering them opportunities to contribute and develop their full potential while we share with them the rewards and responsibilities of their achievements

• Providing investors with consistent returns

• Being responsible corporate citizens in our communities by maintaining high ethical business and environmental standards

Experience, quality and innovation are key words that describe AMETEK Calibration Instruments - now and in the future.

C u s t o m e r c a r e a n d l o y a l t y t o c o l l e a g u e s




L o n g h i s t o r y , e x t e n s i v e e x p e r i e n c e a n d s t r o n g b r a n d s

In the early 1980s, Frank Schiessl and his wife Johanne Schiessl founded the Danish company JOFRA Instruments introducing the world’s first temperature dry-block calibrator. Their basic idea was to supply portable temperature calibrators to the industry in general, where demand for performing calibrations was increasing.

In 1945, Frode Pedersen & Co A/S was founded, specialising in imported equipment for electrical temperature measurements. The company began producing temperature sensors in 1950 and became a leading Danish manufacturer of industrial temperature sensors.

FP Temperature Sensors

In 1997, Frode Pedersen & Co A/S was acquired to gain in-house knowledge of the temperature sensors being calibrated in the temperature calibrators developed and manufactured by AMETEK Calibration Instruments.

AMETEK Calibration Instruments

In 1991, AMETEK Inc acquired JOFRA Instruments and renamed it AMETEK Denmark A/S. At this point, AMETEK Denmark A/S and AMETEK’s existing pressure calibration manufacturer Mansfield & Green became the business unit AMETEK Calibration Instruments.

In 1966, Mansf ie ld & Green introduced the deadweight tester based on the “f loating bal l” principle. This deadweight tester is an extremely easy-to-use, reliable and accurate primary standard and is now earning its reputation as the “standard of standards”.

World-leading company within temperature, pressure and signal calibration

Our researchers are continuously developing calibration instruments for temperature, pressure and signal calibration e.g.:- In 2000, we introduced the unique ATC series of dry-block calibrators with outstanding performance and features - the portable calibration laboratory - In 2007, we introduced the world’s first dry-block calibrator providing fast, accurate calibrations down to -90˚C

At AMETEK Calibration Instruments, we will continue to develop innovative, easy-to-use calibration solutions.

10 www.ametekcal ibrat ion.com

AMETEK Calibration Instruments is one of four business units in the AMETEK Measurement & Calibration Technologies Division (M&CT).

The M&CT Division is a world-leading manufacturer of measurement instrumentation for pressure, level and precision, material-testing systems and calibration instruments.

AMETEK M&CT Division has approximately 630 employees worldwide, operates 8 manufacturing facilities, has seven sales and service centres globally and is a division of the AMETEK Electronic Instruments Group (EIG).

EIG is a leading manufacturer of advanced monitoring, testing, calibrating and display instruments for the power, processing, aerospace and industrial markets worldwide.

The Electronic Instruments Group is one of two groups within AMETEK Inc., a leading global manufacturer of electronic instruments and electromechanical devices with annual sales of 1.8 billion USD. AMETEK has almost 10,000 employees working at more than 60 manufacturing facilities and 60 sales and service centres in the United States and more than 30 other countries around the world.

Find more information at www.ametek.com

W e a r e n o t a l o n e

AMETEK Electronic Instruments Group

AMETEK Measurement & Calibration Technologies Division

AMETEK Calibration Instruments Business Unit

AMETEK Inc.

11www.ametekcal ibrat ion.com


Headquarters:

AMETEK Denmark A/S Gydevang 32-34 • 3450 Allerød • Denmark Tel: +45 4816 8000 • [email protected]

Sales & Service: Europe, Asia, Africa, Middle East and South America

Information in this document is subject to change without notice. ©�00�, by AMETEK, Inc., www.ametek.com. All rights reserved.

Sales & Service Offices:

AMETEK Mansfield & Green (North America)Tel: +1 �00 �� • [email protected]

AMETEK Singapore Pte. Ltd. (Singapore)Tel: +�� • [email protected]

AMETEK Inc. Beijing Rep. Office (China)Tel: +�� 10 �� 111 • [email protected]

AMETEK GmbH (Germany)Tel: +�� 1�� 1��0 • [email protected]

AMETEK Lloyd Instruments (UK)Tel: +�� (0) 1�� 0� • [email protected] code P-CP-2050-US Issue 0710

1� www.ametekcal ibrat ion.com

Documents

Ametek