1
TECHNICAL CHARACTERISTICS windmöller flooring products WFP GmbH – Nord-West-Ring 21 – 32832 Augustdorf 10/2016 ambra Covering type according to EN ISO 10582: Heterogeneous resilient-flooring for glueless installation ambra wood ambra stone Format 1212 x 185 mm 600 x 314 mm Product thickness 4.5 mm 4.5 mm Planks, tiles / m² per box 10 / 2.24 m² 12 / 2.26 m² Boxes / m² per pallet 52 / 116.48 m² 52 / 117.52 m² Guarantee 15 years – Guarantee for private use according to Windmöller warranty conditions – www.wineo.de Classification Product composition Utilization class 23 Heavy-duty use in the domestic area EN ISO 10874 Corridors, living rooms, kitchens, home offices 1 Surface sealing Utilization class 31 Medium use in the commercial sector EN ISO 10874 Hotel rooms, small offices 2 Wear layer Thickness 0.3 mm Wear resistance EN 660-2 Group T 3 Decor film Surface texture - various embossings Reaction to fire EN 13501-1 Bfl - s1 4 Base layer with glass fibre reinforced Anti slip category DIN 51130 R9 5 Backing Slip resistance EN 13893 0.30 – DS Profile connection Connect technology Anti-static properties EN 1815 ≤ 2 kV Insulation mat silentCOMFORT (seperately available) Staining and chemical resistance EN ISO 26987 Good resistance according to the concentration and residence time Bevelled edge – ambra wood Light fastness EN ISO 105-B02 6 Residual indentation EN ISO 24343-1 ~ 0.07 mm Certifications Castor chair test EN 425 / ISO 4918 Type W – no visible change Thermal resistance EN 12667 ~ 0.033 (m²K)/W ~ 0.0254 (m²K)/W in combination with silentCOMFORT Impact sound reduction EN ISO 16251-1 ~ 7 dB up to 14 dB in combination with silentCOMFORT Dimension stability EN ISO 23999 ~ 0.1 % Disposal Private: Possible with normal domestic refuse Commercial: Refuse-key-no. AVV 170203 Relevant information: Underfloor heating: Suitable for all conventional hot water underfloor heating and electrical systems regulated up to a surface temperature of 27° C. Cleaning and care: see separate cleaning & care instruction. Technical subjects can be changed by windmöller flooring products WFP GmbH. EN 660-2 3 4 5 2 1 Information representative des emissions dans l’air interieur des substances volatiles presentant un risque de toxicite par inhalation, sur une echelle de classe allant de C (fortes emissions) a A+ (tres faibles emissions)

ambra-to-click-in 10-2016 GB - BRICOFLOR fileambra Covering type ... per box 10 / 2.24 m² 12 / 2 ... Suitable for all conventional hot water underfloor heating and electrical systems

Embed Size (px)

Citation preview

TECHNICAL CHARACTERISTICS

windmöller flooring products WFP GmbH – Nord-West-Ring 21 – 32832 Augustdorf 10/2016

ambraCovering type according to EN ISO 10582: Heterogeneous resilient-flooring for glueless installation

ambra wood ambra stone

Format 1212 x 185 mm 600 x 314 mm

Product thickness 4.5 mm 4.5 mm

Planks, tiles / m²per box

10 / 2.24 m² 12 / 2.26 m²

Boxes / m²per pallet

52 / 116.48 m² 52 / 117.52 m²

Guarantee15 years – Guarantee for private useaccording to Windmöller warranty conditions – www.wineo.de

Classification Product composition

Utilization class 23Heavy-duty use in the domestic areaEN ISO 10874

Corridors, living rooms, kitchens,home offices

1 Surface sealing

Utilization class 31Medium use in the commercial sectorEN ISO 10874

Hotel rooms, small offices 2Wear layerThickness 0.3 mm

Wear resistanceEN 660-2

Group T 3Decor filmSurface texture- various embossings

Reaction to fireEN 13501-1

Bfl - s1 4Base layerwith glass fibre reinforced

Anti slip categoryDIN 51130

R 9 5 Backing

Slip resistanceEN 13893

0.30 – DSProfile connectionConnect technology

Anti-static propertiesEN 1815

≤ 2 kV Insulation matsilentCOMFORT(seperately available)

Staining and chemical resistanceEN ISO 26987

Good resistance according to theconcentration and residence time

Bevelled edge – ambra wood

Light fastnessEN ISO 105-B02

6

Residual indentationEN ISO 24343-1

~ 0.07 mmCertifications

Castor chair testEN 425 / ISO 4918

Type W – no visible change

Thermal resistanceEN 12667

~ 0.033 (m²K)/W

~ 0.0254 (m²K)/W in combinationwith silentCOMFORT

Impact sound reductionEN ISO 16251-1

~ 7 dBup to 14 dB in combination

with silentCOMFORT

Dimension stabilityEN ISO 23999 ~ 0.1 %

DisposalPrivate:Possible with normal domestic refuse

Commercial: Refuse-key-no. AVV 170203

Relevant information:

Underfloor heating: Suitable for all conventional hot water underfloor heating and electrical systems regulated up to a surface temperature of 27° C.

Cleaning and care: see separate cleaning & care instruction.

Technical subjects can be changed by windmöller flooring products WFP GmbH.

EN 660-2EN 660-2

3

4

5

2

1

Information representative desemissions dans l’air interieur dessubstances volatiles presentant unrisque de toxicite par inhalation, sur uneechelle de classe allant de C (fortesemissions) a A+ (tres faibles emissions)