Weight per plank : 1.64 kg / 3.62 lb

Model : FP-04FV-0801

Aluminum Soffit Plank4‘’ Flat

ALUMINUM6063-T5 Aluminum extrusion 1.60 mm (0.062 in) thick recognised as the industry’s first choice for its exceptional durability. Planks are designed to allow air circulation and water drainage.

Two oblong holes 1 '' X 0,125 '', spaced 2 '' apart, all being repeated every 4 '' to allow for fast and easy screw insertion.

All sizes of profiles interlock with each other with simple tongue and groove mating. (Detail A)

In every 8 foot soffit plank, there are 5,75 square inches of ventilation. PRIMER COATPrimer coat (±1,2 mil. thick) applied to ensure perfect adhesion between aluminum and ink.

HD PRINTINGHigh-definition digital inkjet printing (±1 mil. thick) is used to create photographic reproductions of a wide range of textures and outstanding color variations.

UV BARRIERA protective clear coat (±1,2 mil. thick) is applied to provide long-term protection against UV rays and fading.

Detail A

Date: 18-11-22

Drawing by: JCC

Length : 2.43 m / 8 ft

Job # : Color : Date :

Initials :

Name :

Product : Aluminum siding soffit

Material : Aluminum 6063-T5

Tests & Certifications*. CAN/ULC S102 - Fire Resistance. CAN/ULC S114 - Fire Resistance. ASTM E84 - Fire Resistance. NFPA 285 - Fire Resistance. ASTM D6578 - Graffiti Resistance. ASTM G155 - UV Resistance. ISO 7895 / ASTM E330 - Wind Load. ISO 7895 - Impact Resistance. ASTM D3359 - Adhesion testing. ASTM D4060 (CS-17) - Abrasion Resistance. Florida Building Code (FBC) compliance. LEED V4

* see website for full details

TECHNICAL DATA SHEET

1

2

3

4

1.

2.

3.

4.

13.12 mm0.517 in

3.18 mm0.125 in28.58 mm

1.12 in

20.83 mm0.82 in

119.65 mm4.710 in

101.60 mm4.054 in

1.50 mm0.062 in

Weight per plank : 1.64 kg / 3.62 lb

Model : FP-04VV-0801

Aluminum Soffit Plank4‘’ V Groove

ALUMINUM6063-T5 Aluminum extrusion 1.60 mm (0.062 in) thick recognised as the industry’s first choice for its exceptional durability. Planks are designed to allow air circulation and water drainage.

Two oblong holes 1 '' X 0,125 '', spaced 2 '' apart, all being repeated every 4 '' to allow for fast and easy screw insertion.

All sizes of profiles interlock with each other with simple tongue and groove mating. (Detail A)

In every 8 foot soffit plank, there are 5,75 square inches of ventilation. PRIMER COATPrimer coat (±1,2 mil. thick) applied to ensure perfect adhesion between aluminum and ink.

HD PRINTINGHigh-definition digital inkjet printing (±1 mil. thick) is used to create photographic reproductions of a wide range of textures and outstanding color variations.

UV BARRIERA protective clear coat (±1,2 mil. thick) is applied to provide long-term protection against UV rays and fading.

Detail A

Date: 18-11-22

Drawing by: JCC

Length : 2.43 m / 8 ft

Job # : Color : Date :

Initials :

Name :

Product : Aluminum siding soffit

Material : Aluminum 6063-T5

Tests & Certifications*. CAN/ULC S102 - Fire Resistance. CAN/ULC S114 - Fire Resistance. ASTM E84 - Fire Resistance. NFPA 285 - Fire Resistance. ASTM D6578 - Graffiti Resistance. ASTM G155 - UV Resistance. ISO 7895 / ASTM E330 - Wind Load. ISO 7895 - Impact Resistance. ASTM D3359 - Adhesion testing. ASTM D4060 (CS-17) - Abrasion Resistance. Florida Building Code (FBC) compliance. LEED V4

* see website for full details

TECHNICAL DATA SHEET

1

2

3

4

1.

2.

3.

4.

13.12 mm0.517 in

3.18 mm0.125 in28.58 mm

1.12 in

20.83 mm0.82 in

119.65 mm4.710 in

101.60 mm4.054 in

1.60 mm0.062 in

3.18 mm0.125 in28.58 mm

1.12 in

20.83 mm0.82 in

Aluminum Soffit Plank 6 ‘’ Channel

Detail A

Date: 18-11-22

Drawing by: JCC

Length : 2.43 m / 8 ft

Job # : Color : Date :

Initials :

Name :

Material : Aluminum 6063-T5

Tests & Certifications*. CAN/ULC S102 - Fire Resistance. CAN/ULC S114 - Fire Resistance. ASTM E84 - Fire Resistance. NFPA 285 - Fire Resistance. ASTM D6578 - Graffiti Resistance. ASTM G155 - UV Resistance. ISO 7895 / ASTM E330 - Wind Load. ISO 7895 - Impact Resistance. ASTM D3359 - Adhesion testing. ASTM D4060 (CS-17) - Abrasion Resistance. Florida Building Code (FBC) compliance. LEED V4

* see website for full details

ALUMINUM6063-T5 Aluminum extrusion 1.7 mm (0.068 in) thick recognised as the industry’s first choice for its exceptional durability. Planks are designed to allow air circulation and water drainage.

Two oblong holes 1 '' X 0,125 '', spaced 2 '' apart, all being repeated every 4 '' to allow for fast and easy screw insertion.

All sizes of profiles interlock with each other with simple tongue and groove mating. (Detail A)

In every 8 foot soffit plank, there are 5,75 square inches of ventilation.

PRIMER COATPrimer coat (±1,2 mil. thick) applied to ensure perfect adhesion between aluminum and ink.

HD PRINTINGHigh-definition digital inkjet printing (±1 mil. thick) is used to create photographic reproductions of a wide range of textures and outstanding color variations.

UV BARRIERA protective clear coat (±1,2 mil. thick) is applied to provide long-term protection against UV rays and fading.

TECHNICAL DATA SHEET

1

2

3

4

1.

2.

3.

4.

13.12 mm ± 0.410.517 ± 0.016

Model : FP-06CV-0806 Product : Aluminum siding soffit

Weight per plank : 1.64 kg / 3.62 lbs

Weight per box (6 pcs) : 9.84 kg / 21.72 lbs

153.36 mm6.037 in

170.08 mm6.696 in

1.7 mm0.068 in

Weight per plank : 1.64 kg / 3.62 lb

Weight per box (6 pcs) : 9.84 kg / 21.72 lb

Model : FP-06FV-0806

Aluminum Soffit Plank6‘’ Flat

ALUMINUM6063-T5 Aluminum extrusion 1.60 mm (0.062 in) thick recognised as the industry’s first choice for its exceptional durability. Planks are designed to allow air circulation and water drainage.

Two oblong holes 1 '' X 0,125 '', spaced 2 '' apart, all being repeated every 4 '' to allow for fast and easy screw insertion.

All sizes of profiles interlock with each other with simple tongue and groove mating. (Detail A)

In every 8 foot soffit plank, there are 5,75 square inches of ventilation. PRIMER COATPrimer coat (±1,2 mil. thick) applied to ensure perfect adhesion between aluminum and ink.

HD PRINTINGHigh-definition digital inkjet printing (±1 mil. thick) is used to create photographic reproductions of a wide range of textures and outstanding color variations.

UV BARRIERA protective clear coat (±1,2 mil. thick) is applied to provide long-term protection against UV rays and fading.

Detail A

Date: 18-11-22

Drawing by: JCC

Length : 2.43 m / 8 ft

Job # : Color : Date :

Initials :

Name :

Product : Aluminum siding soffit

Material : Aluminum 6063-T5

Tests & Certifications*. CAN/ULC S102 - Fire Resistance. CAN/ULC S114 - Fire Resistance. ASTM E84 - Fire Resistance. NFPA 285 - Fire Resistance. ASTM D6578 - Graffiti Resistance. ASTM G155 - UV Resistance. ISO 7895 / ASTM E330 - Wind Load. ISO 7895 - Impact Resistance. ASTM D3359 - Adhesion testing. ASTM D4060 (CS-17) - Abrasion Resistance. Florida Building Code (FBC) compliance. LEED V4

* see website for full details

TECHNICAL DATA SHEET

1

2

3

4

1.

2.

3.

4.

13.12 mm0.517 in

3.18 mm0.125 in28.58 mm

1.12 in

20.83 mm0.82 in

154.30 mm6.052 in

170.44 mm6.710 in

1.60 mm0.062 in

3.18 mm0.125 in28.58 mm

1.12 in

20.83 mm0.82 in

Aluminum Soffit Plank 6 ‘’ V Groove

Detail A

Date: 18-11-22

Drawing by: JCC

Length : 2.43 m / 8 ft

Job # : Color : Date :

Initials :

Name :

Material : Aluminum 6063-T5

Tests & Certifications*. CAN/ULC S102 - Fire Resistance. CAN/ULC S114 - Fire Resistance. ASTM E84 - Fire Resistance. NFPA 285 - Fire Resistance. ASTM D6578 - Graffiti Resistance. ASTM G155 - UV Resistance. ISO 7895 / ASTM E330 - Wind Load. ISO 7895 - Impact Resistance. ASTM D3359 - Adhesion testing. ASTM D4060 (CS-17) - Abrasion Resistance. Florida Building Code (FBC) compliance. LEED V4

* see website for full details

ALUMINUM6063-T5 Aluminum extrusion 1.73 mm (0.068 in) thick recognised as the industry’s first choice for its exceptional durability. Planks are designed to allow air circulation and water drainage.

Two oblong holes 1 '' X 0,125 '', spaced 2 '' apart, all being repeated every 4 '' to allow for fast and easy screw insertion.

All sizes of profiles interlock with each other with simple tongue and groove mating. (Detail A)

In every 8 foot soffit plank, there are 5,75 square inches of ventilation.

PRIMER COATPrimer coat (±1,2 mil. thick) applied to ensure perfect adhesion between aluminum and ink.

HD PRINTINGHigh-definition digital inkjet printing (±1 mil. thick) is used to create photographic reproductions of a wide range of textures and outstanding color variations.

UV BARRIERA protective clear coat (±1,2 mil. thick) is applied to provide long-term protection against UV rays and fading.

TECHNICAL DATA SHEET

1

2

3

4

1.

2.

3.

4.

13.12 mm ± 0.410.517 ± 0.016

170.96 mm ± 1.376.731 in ± 0.054

154.24 mm6.072 in

1.73 mm0.068 in

Model : FP-06VV-0806 Product : Aluminum siding soffit

Weight per plank : 1.64 kg / 3.62 lb

Weight per box (6 pcs) : 9.84 kg / 21.72 lb