Aluminum Boats

Alum

inum

Boa

ts

STANLEY ALUMINUM BOATS are proudly built in Parry Sound, Ontario, by Connor Industries, an independent manufacturer and the Industry Leader in fully welded aluminum boats. Since 1982, Connor Industries has demonstrated a commitment to the marine industry by aggressively and progressively researching, designing and developing the highest quality boats in the marketplace.

All STANLEY ALUMINUM BOATS are constructed indoors in a clean, modern, quality controlled environment, using the latest technology. Built with the best marine grade aluminum and with our skilled craftsmanship, Connor Industries guarantees a superior boat that will move safely, efficiently and with unparalleled stability on the water. Noted for being the first boat in the water in early spring and the last one out in late fall, our 14’ to 55’ STANLEY boats are built to last. This season make your time on the water safer, easier and more enjoyable in a STANLEY boat.

Alum

inum

Boa

ts

Till

er Regardless of your age, the Camp Tiller will last a lifetime. Ideal for the cottage

or camp, the all aluminum welded construction is what makes the

Camp Tiller the solid choice.Tille

r

Till

er

FEATURES

• 3/16” hull • 3/16” sides• V bottom floor • Welded gunwales• Lifting strakes • Keel guard• Bow eye • Stern lift handles• Bow seat • Middle seat• 2 paddle holders • 3 tie down cleats• Stern port and starboard seats• 20 inch transom

Model Length Beam Weight Seating Outside Deadrise Max HP

14 Tiller 14’ 66” 450 2 to 4 24” 4° 3016 Tiller 16’ 68” 525 2 to 4 24” 4° 4016 Tiller W 16’ 74” 585 2 to 4 24’ 6° 4017 Tiller (Floor) 17’ 78” 800 2 to 4 24” 8° 5018 Tiller (Floor) 18’ 78” 850 2 to 4 24” 8° 6018 Tiller (No Floor) 18’ 78” 700 2 to 4 24” 8° 6020 Tiller (Floor) 19’-2” 78” 975 2 to 4 24” 8° 6020 Tiller (No Floor) 19’-2” 78” 725 2 to 4 24” 8° 60

Tille

r

TILLER 14’ to 20’

Min

k The lightweight and rugged MINK is a boat for the lakes. Whether it is being used for pleasure, commuting or light

work, the MINK has no equal for comfort and versatility in a small package and will provide a lifetime of outstanding

performance.

Model Length Beam Weight Seating Outside Deadrise Max HP

16 Mink (CC) 16’ 82” 1100* 4 to 6 28” 10° 7516 Mink (DC) 16’ 82” 1300* 4 to 6 28” 10° 7518 Mink (CC) 18’ 82” 1300* 4 to 6 28” 11° 9018 Mink (DC) 18’ 82” 1600* 4 to 6 28” 11° 90

* denotes maximum weight for 16’ and 18’ models.

FEATURES

• 3/16” hull and sides • 3/16” non-slip floor• Self bailing floor • Deep V hull• Welded gunwales • Lifting strakes• Keel guard • Bow eye • 20 inch transom • 12 volt receptacle• Paddle holders • Horn• 3 tie down cleats • 4 breaker panel• Water tight bow compartment• Anchor locker• Two transom storage lockers• 10 gallon carry on fuel tank• Battery tray/box• Navigation lights • Custom aluminum windshield• 2 adjustable swivel pedestal seats• Welded motor mount bracket

CC = centre console DC = dual console

MINK DC 16’ to 18’ MINK CC 16’ to 18’

Min

k

Designed for both pleasure and sport, the Islander has plenty of seating, built

in storage, self bailing floor, swim platform and a variety of options

including a T- top or open wheelhouse.

Isla

nder

Isla

nder

Model Length Beam Weight Seating Outside Deadrise Max HP

Islander Runabout 19 19’ 96” 1725* 6 to 8 30” 16° 150Islander Runabout 21 21’ 100” 2000* 8 to 10 36” 16° 200Islander Runabout 23 23’ 100” 2200* 8 to 10 36” 16° 200 Islander I/O 21 21’ 100” 2765 6 to 8 36” 16° I/O 220

* denotes maximum weight for 19’, 21’ and 23’ models.

FEATURES

• 3/16” non slip floor • Self bailing floor• Bow anchor locker • 6” wide gunwales• Lifting strakes • Keel guard• Deep V hull • Hard chines• Bow eye • 2 stern eyes• Navigation lights • 12 volt receptacle• Horn • Glove box cut out• 6 tie down cleats • 6 breaker panel• 3/16” hull and 3/16” sides (Is-19)• 1/4” hull and 3/16” sides (ls-21 and ls-23)• 20 inch transom (Is-19) • 25 inch transom (ls-21 and ls-23)• Built in 24 gal. fuel tank (Is-19)• Built in 33 gal. fuel tank (ls-21 and ls-23)• Telflex hydraulic steering system• 2 adjustable swivel pedestal seats with bases• Full stern bench seat and storage locker• Welded on motor mount bracket

CC = centre console DC = dual consoleI/O = inboard/outboard

ISLANDER DC 19’ to 23’ ISLANDER I/O 19’ to 23’

ISLANDER CC 19’ to 23’

The ¼” thick, modified deep V hull design, 18 degree deadrise makes the Cruiser the most durable, comfortable

and seaworthy vessel on the water and the popular choice for boaters who rely

on their boat for pleasure and work.Crui

ser

FEATURES

• Lifting strakes • Keel guard• Deep V hull • Bow eye• 2 stern eyes • 25 inch transom• Navigation lights • 8 breaker panel• 12 volt receptacle • Horn• Glove box• Helm / hydraulic steering (sea star)• 1/4” hull and 3/16” sides• 3/16” non slip self bailing floor • Bow anchor locker• Port and starboard boarding steps• Custom seating with storage• Built in 71 gal. fuel tank• Captains bench seat• Open bow rails 1” dia.• 6 tie down cleats

Styles: sport and hardtop

Outboard or I/O configurations

CRUISER 23’ to 27’

Model Length Beam Weight Seating Outside Deadrise Max HP

Cruiser 23 HT 23’ 114” 3000 10 + 36” 18° 200 +Cruiser 23 Sport 23’ 114” 2700 10 + 36” 18° 200 +Cruiser 25 HT 25’ 114” 3500 10 + 36” 18° 300 +Cruiser 25 Sport 25’ 114” 3200 10 + 36” 18° 300 +Cruiser 27 HT 27’ 114” 4400 10 + 36” 18° 450 +Cruiser 27 Sport 27’ 114” 4000 10 + 36” 18° 450 +

* all above models available in a I/O configuration.

Crui

ser

This multi purpose, no nonsense Predator is designed to become the ultimate mini barge for transporting

cargo, equipment, gear and crew to base camp.

Pred

ator

Pred

ator

Model Length Beam Weight Seating Outside Deadrise Max HP

18 Predator 18’ 80” 1200 4 to 5 26” 7° 7520 Predator 20’ 90” 1400 4 to 5 28” 7° 90

FEATURES

• 3/16” hull & sides• 3/16” non skid floor• Self bailing floor• Semi V hull with lifting strakes• Navigational lights• Lockable bow compartment• 12 volt receptacle• 4 tie down cleats• 2 paddle holders• 26” side console with rotary steering• Stern storage compartment with swivel

driver’s seat• 10 gal. carry on fuel tank• Splash wellPREDATOR 18’ PREDATOR 20’

Puls

ecra

ftThe Pulsecraft offers family recreation

capabilities including fishing, waterskiing and tubing. Uniquely designed with a 5 foot wide drop

gate/ ramp and SELF BAILING FLOOR, the Pulsecraft is also available with

optional side access door, dual console, centre console and open

or closed wheelhouse.

Puls

ecra

ft

Model Length Beam Weight Sides Cargo Bow Gate Deadrise Max HP

Pulsecraft 22 22’ 100” 2100* 32” 1800 60” 15° 200 obPulsecraft 24 24’ 100” 2500* 36” 2500 60” 15° 200 obPulsecraft 26 26’ 100” 3250* 36” 3800 60” 15° 200 +

* all above models available in a I/O configuration.* denotes maximum weight for 20’, 22’, 24’ and 26’ models.

FEATURES

• Welded gunwales • Lifting strakes• Keel guard • Heavy duty framing• 6 tie down cleats • Bow eye• 3/16” hull and sides (PC 22)• 1/4” hull and 3/16” sides (PC 24 - 26)• 3/16” non-slip self bailing cargo floor• Engineered load carrying hull• Side railings• Front drop ramp with hand winch• Navigation lights• Full stern lockable bench seat

(DC-CC models only)• Built in 33 gal. fuel tank• Rear stern lift lugs• Welded on motor mount bracket

CC = centre console DC = dual consoleI/O = inboard/outboard SC = side console

PULSECRAFT CC 22’ TO 26’

CLOSED CABIN

OPEN CABIN

PULSECRAFT CABIN 22’ TO 26’

PULSECRAFT DC 22’ TO 26’

Rais

ed D

eck The Raised Deck is designed with

a step down cuddy with spacious seating area to make sure

you to and your cargo arrive at the cottage safe and dry.

FEATURES

• 3/16” non slip floor • Self bailing floor• Bow anchor locker • 6” wide gunwales• Lifting strakes • Keel guard• Deep V hull • Hard chines• Bow eye • 2 stern eyes• Navigation lights • 12 volt receptacle• Horn • Glove box cut out• 6 tie down cleats • 6 breaker panel• 1/4” hull and 3/16” sides• 25 inch transom• Built in 54 gal. fuel tank• Telflex hydraulic steering system• 2 adjustable swivel pedestal seats with bases• Welded on motor mount bracket

RAISED DECK 22’ to 24’

Model Length Beam Weight Seating Deadrise Max HP

22 Raised Deck 22’ 100” 2150 6 to 8 16º 20024 Raised Deck 24’ 100” 2350 6 to 8 16º 200

Rais

ed D

eck

Cust

om F

inis

hing

Opt

ions

In 2007, Stanley Aluminum Boats/Connor Industries, expanded operations to include a custom in house and retail upholstery shop. We provide complete upholstery services on all new vessels including seat and bench cushions, tops with curtains, bow covers, and tonneau covers using only Stainless Steel fittings and hardware. On site, we stock a large assortment of, marine grade fabric by Sunbrella & Dickson Coastguard. These colour fast, breathable fabrics protect your investment from all kinds of weather from season to season. In fact, Sunbrella fabrics are so durable we back them with the best limited warranty in the business. We also provide a full on site retail service bay to accommodate every boaters’ needs and special requests.

Please contact us for more information and to view a complete line of our product swatches.

Stanley Boats is pleased to provide their clients with custom finishing options. Utilizing 7/8” stainless steel tubing and hardware on all tops adds to the quality of craftsmanship that make Stanley Boats leaders in the industry.

* Please note fabric samples shown are for representational purposes only and actual swatch samples can be viewed at your local dealer.

Burgundy RedTweed Red Charcoal Toast

OceanBlue Blue BlueTweed ForestGreen ForestTweed

Cust

om F

inis

hing

Opt

ions

Customization Options

TILLER MINK 16 MINK 18 ISL. 19 ISL. 21 ISL. 23 PRED 18 PRED 20 PC 20 PC 22 PC 24 PC 26 CRUISER RDECK

14 16 16W 17F 17SD 18 20 DC CC SC DC CC SC DC CC DC CC DC CC SC CC SC CC DC CC DC CC CAB DC CC CAB DC CC CAB SP HT 22 24

Bolt-on SC • • • • • •Factory Installed SC • • • • • •Bow Railings (pair) • • • • • • • • • • • • • • • •Side Railings (pair) • • • • • • • • • • • • • • • • • • • • • •Stern Railing • • • • • • • • • • • • • • • • • • • • •Extra Ped. Base /w Seat • • • • • • • • • • • • • •Back To Back Seats • • • • • • • •Factory Installed Swivel Seats • • • • • • •Removable Bench Seat • • • • • • • • •Telescopic Folding Ladder • • • • • • • • • • • • • • • • • • • • •Bow Seat Configuration • • •T-Top /w Aluminum Frame • • • • • • •Electric winch for drop gate • • • • • • • • • • •Ice Package • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •Tow Bollard • • • • • • • • • • • • •Cargo Tie Downs • • • • • • • • • • • • • • • • •Cargo Area Drainage • • • •Starboard Side Door • • • • •Extra Motor Bracket • • • • • • • • • • • • • • •I/O Configuration • • • • • • • • • • • • • • • • • • • • •Full Swim Platform (I/O Only) • • • • • • • • • • • • • • • • • • •Anchor Pulpit • • • • • • • • • • • • • • • • • • •Docking Lights • • • • • • • • • •Head /w Pump out Tank • •Defroster 12V • • • • •Cuddy Cabin Package • •Paint (Inside & Out) • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •Captain Swivel Bucket Seats • •Extra Windshield Wiper • • • • • • • • • • •Self Bailing Floor •Full Welded Aluminum Floor • •Bow Seat Cushions • • • • • • • • • • • • • • • • • •Bench Cushions • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •Stern Seat Cushions (pr) • • • • • • • • • • • • •Top /w Curtains & S/S Frame • • • • • • • • • • • • • • • •Bow Cover • • • • •Tonneau Cover • • • • • • • •Walkthrough Curtain • • • • • • • • •Ped. Seat Cushions /w Back (pr) • • • • • • • • • • • • • • • • •Forward Seat Cushion • • • • •Forward Seat Backrest • • • • •Cooler Seat Fabric Change • • • • • • •Bimini Top /w Full Enclosure • • • • • • • • • • •Back To Back Sleeper Seats (pr) • • • • • •Removable Ramps • • • •

Manufacturing Note: The information printed in this brochure is based upon the latest product information available at the time of printing. Stanley Boats reserves the right to make changes at any time to prices, materials, equipment, specifications and models; and to discontinue models without notice or obligation.

All specifications are approximate. Text may mention optional equipment which may not be included as a standard item in your model choice. Photographs and illustrations may not show all optional equipment available. Please ask your dealer about additional options and costs.

SAFETY NOTE: Stanley Boats recommends all persons take a Canadian Coast Guard approved course in safe boating procedures.

Stanley Boats • Connor Industries

75 Tudhope St. N.

Parry Sound, Ontario Canada P2A 2W9

Tel 705 746 5875 Fax 705 746 5876

info@connorindustries.com

www.stanleyboats.ca