Engineers, Architects and Designers appreciate and favour ALUCORE because it combines high mechanical properties, such as the rigidity of the cover sheets, with outstanding aesthetic features. The exclusive production technology in a continuous process enables large size panels up to lengths of 9 m. with superior flatness. Clean, easily fabri-cated with perfect details, a great variety of applications is possible with the use of ordinary tools. Its peculiar characteristics make ALUCORE the ideal choice not only for outdoor applications as facade claddings, roofings, balconies, shelters, etc., but also for interior design like artistic ceilings, etc. With regard to the surface finishing, high-quality lacquering systems with optimum resistance to weather and industrial pollution are used exclusively. These properties are archived by using fluorinated resins. For standard finishes, PVDF-based top lacquers are used. The finished product is tested according to European Coil Coating Association (ECCA).

ALUCORE ALUCOBOND SolidAluminiumRigidity Thickness Weight Thickness Weight Thickness Weight

1250 kNcm2/m 3 mm 4.5 kg/m2 2.7 mm 7.3 kg/m2

2400 kNcm2/m 4 mm 5.5 kg/m2 3.3 mm 8.9 kg/m2

5900 kNcm2/m 6 mm 7.3 kg/m2 4.5 mm 12.2 kg/m2

7100 kNcm2/m 6 mm 4.7 kg/m2 4.8 mm 13.0 kg/m2

21900 kNcm2/m 10 mm 5.0 kg/m2 7.0 mm 18.9 kg/m2

75500 kNcm2/m 15 mm 6.7 kg/m2 10.5 mm 28.4 kg/m2

138900 kNcm2/m 20 mm 7.0 kg/m2 13.0 mm 35.1 kg/m2

221600 kNcm2/m 25 mm 7.3 kg/m2 15.2 mm 41.0 kg/m2

clamped / screwed with edge sections for vertical panel layout

With pilaster sectionWith double top-hat sectionsclamped / screwed for vertical panel layout

clamped / screwed with visible edge sections Vertical / horizontal panel layout

Prin

ted

in G

erm

any

GB

- 01/

11/0

8

Honeycombcompositepanelsforarchitecturalapplications

ALUCOREHoneycombcompositepanelsforarchitecturemorethanjustawallcladding

ALUCOREConstructionexamples

Core

Adhesive

Coversheet

ALUCOREis an aluminium composite panel consisting of two cover sheets and a honeycomb core of aluminium.

Clean, easily fabricated with perfect details, a great variety of applications is possible with the use of ordinary tools. Its particular characteristics make ALUCORE the ideal choice not only for outdoor applications such as faade cladding, roofing, balconies, shelters, etc., but also for interior design like artistic ceilings, etc..

In addition to its low weight and perfect flatness, ALUCORE shows excellent weathering resistance. With regard to the surface finishing, high-quality lacquering systems with optimum resistance to weather and industrial pollution are used exclusively.

3A Composites GmbHD-78224 Singen, GermanyTel. +49 (0) 7731 80 23 47info.eu@alucobond.comwww. alucobond.com

Engineers, Architects and Designers appreciate and favour ALUCORE because it combines high mechanical properties, such as the rigidity of the cover sheets, with outstanding aesthetic features. The exclusive production technology in a continuous process enables large size panels up to lengths of 9 m. with superior flatness. Clean, easily fabri-cated with perfect details, a great variety of applications is possible with the use of ordinary tools. Its peculiar characteristics make ALUCORE the ideal choice not only for outdoor applications as facade claddings, roofings, balconies, shelters, etc., but also for interior design like artistic ceilings, etc. With regard to the surface finishing, high-quality lacquering systems with optimum resistance to weather and industrial pollution are used exclusively. These properties are archived by using fluorinated resins. For standard finishes, PVDF-based top lacquers are used. The finished product is tested according to European Coil Coating Association (ECCA).

ALUCORE ALUCOBOND SolidAluminiumRigidity Thickness Weight Thickness Weight Thickness Weight

1250 kNcm2/m 3 mm 4.5 kg/m2 2.7 mm 7.3 kg/m2

2400 kNcm2/m 4 mm 5.5 kg/m2 3.3 mm 8.9 kg/m2

5900 kNcm2/m 6 mm 7.3 kg/m2 4.5 mm 12.2 kg/m2

7100 kNcm2/m 6 mm 4.7 kg/m2 4.8 mm 13.0 kg/m2

21900 kNcm2/m 10 mm 5.0 kg/m2 7.0 mm 18.9 kg/m2

75500 kNcm2/m 15 mm 6.7 kg/m2 10.5 mm 28.4 kg/m2

138900 kNcm2/m 20 mm 7.0 kg/m2 13.0 mm 35.1 kg/m2

221600 kNcm2/m 25 mm 7.3 kg/m2 15.2 mm 41.0 kg/m2

clamped / screwed with edge sections for vertical panel layout

With pilaster sectionWith double top-hat sectionsclamped / screwed for vertical panel layout

clamped / screwed with visible edge sections Vertical / horizontal panel layout

Prin

ted

in G

erm

any

GB

- 01/

11/0

8

Honeycombcompositepanelsforarchitecturalapplications

ALUCOREHoneycombcompositepanelsforarchitecturemorethanjustawallcladding

ALUCOREConstructionexamples

Core

Adhesive

Coversheet

ALUCOREis an aluminium composite panel consisting of two cover sheets and a honeycomb core of aluminium.

Clean, easily fabricated with perfect details, a great variety of applications is possible with the use of ordinary tools. Its particular characteristics make ALUCORE the ideal choice not only for outdoor applications such as faade cladding, roofing, balconies, shelters, etc., but also for interior design like artistic ceilings, etc..

In addition to its low weight and perfect flatness, ALUCORE shows excellent weathering resistance. With regard to the surface finishing, high-quality lacquering systems with optimum resistance to weather and industrial pollution are used exclusively.

3A Composites GmbHD-78224 Singen, GermanyTel. +49 (0) 7731 80 23 47info.eu@alucobond.comwww. alucobond.com

b

d1

d2

H

ALUCORE is an aluminium composite panel consisting of two cover sheets and a honeycomb core of aluminium.

Following in the footsteps of the world-wide established ALUCORE trademark, ALUCORE is also a composite material for a variety of applications in transport, architecture or industrial production, showing excellent product properties such as

extraordinary flatness, large variety of colours and high formability.

The aluminium honeycomb core gives the composite panel a high rigid-ity and an extremely low weight. ALUCORE therefore provides the decisive advantage where very high demands are made on the mate-rial for applications such as faade cladding or roofing, e.g. if exposed to extremely high wind load and for large self-supporting roofs.

ALUCOREis the first lightweight panel that you, too, will absolutely insist as being: a bond for life.

Productinformation

The standardcore consists of aluminium foils from AlMn alloys (EN AW 3003). Cell size b: from 6.5 to 9.5 mm.

The coversheets of the ALUCORE panels con-sist of corrosion-resistant Peraluman alloys (AlMg) and may be used in a decorative or functional way, depending on the purpose of application.Structure H: total thickness d1: thickness of AL front sheet d2: thickness of AL back sheet

H

d1

d2

ALUCOREProductRangeThickness Standardwidths Standardlengths6 / 10 / 15 / 20 / 25 mm 1250 / 1500 mm 6250 mm Special width Special length on request 2000 to 9000 mm Standardcolours As per recent colour chartSpecialcolours On request

LoadTablesforPanelThickness6,10and15mm

Criteriafordimensioning: - Calculation by computer programme SOFISTIK - 0.2% proof stress of layers (Rp0.2): EN AW-5005A, H42: 80 N/mm

2

EN AW-5754, H42: 130 N/mm2 - Elastic deflection of supports is restricted to L/150 - Corresponding safety factor (M, F etc.) is to be included in the design load.

*) Max. load increment for suspension of longitudinal sides only **) Smaller value for EN AW-5005A, H42 (Rp0.2 )= 80 N/mm

2

TechnicalData

Thickness: 6mm 10mm 15mm 20mm 25mm Cover sheet thickness, front [mm] 1.0 1.0 Cover sheet thickness, rear [mm] 0.5 1.0 Weight [kg/m2] 4.7 5.0 6.7 7.0 7.3

Technicalproperties: Section modulus W [cm3/m] 2.6 4.6 14.0 19.0 24.0 Rigidity EI [kNcm2/m] 7100 21900 75500 138900 221600 Alloy of Aluminium Layers Peraluman alloy (AlMg) Modulus of Elasticity [N/mm2] 70000 Linear Thermal Expansion 2.4 mm / m at 100 C temperature difference

Surface: Standard lacquering Fluorpolymer (p.e. PVDF) Brilliance (standard) 30 - 80 % Pencil hardness HB - F

AcousticalProperties: Sound Absorption Factor as 0.05 Airborne sound insulation index (acc. to ISO 717-1, ISO 140-3) Rw [dB] 21 21 22 23 25

ThermalProperties: Thermal conductivity* l [W/mK] 0.95 1.35 1.78 2.25 2.70 Thermal resistance R [m2K/W] 0.0063 0.0074 0.0084 0.0089 0.0093 Heat transition coefficient U [W/m2K] 5.67 5.64 5.605 5.59 5.575 Temperature Resistance -40 to +80 C*Depends on the total panel thickness incl. coversheets

ALUCORE-ApprovalsandFireClassification

Country Test accord. to Results / Classification

Germany DIN 4102 Class B1Switzerland VKF Fire regulations Class 5.3 (VKF)France NF P 92-501 M 1Italy CSE RF 1/75/A, RF 3/77 Class 1Denmark DS 1065.1 Class AUK BS 476, Part 6 Index 0 BS 476, Part 7 Class 1 Meets the requirements according to Class 0 of the national building regulationsSingapore Approved for outdoor wall cladding for any type of buildings without limits as to their height

Table1 SuspendedCeilingsDeflectionduetodeadload

Panel size * ALUCORE 6 mm

ALUCORE 10 mm

ALUCORE 15 mm

Width [mm] Length [mm] Deflection [mm] Deflection [mm] Deflection [mm]

*) NOTE:all four sides supported

1000100020003000

0.30.70.8

- -0.20.3

- -- -- -

1250125025003750

0.71.72.1

0.20.60.7

- -0.20.3

1500150030004500

1.63.64.3

0.51.31.5

0.20.50.6

Table2 Windload

Pressure/suction ALUCORE 6 mm ALUCORE 10 mm ALUCORE 15 mm

[kN/m2]

kPa

W = 1250 mm W = 1500 mm W = 1250 mm W = 1500 mm W = 1250 mm W = 1500 mm

L [mm] L [mm] L [mm] L [mm] L [mm] L [mm]

Maximumlength Lof the panel W = 1250 1500

All 4 sidessupported,edges fixed

0.801.001.201.401.601.802.002.202.503.003.504.004.505.005.506.00

9000 9000*)

90009000517544253975323025001875152512751125975875800

900090006375545038253050257522751900150012501100975875800750

900090009000900090009000

9000*)900065003550280022002000180016001400

900090009000

9000*)900090005850440033502370187015601410129011701060

9000900090009000900090009000900090009000900090009000900090009000

9000900090009000900090009000900090009000

9000*)900090009000

9000/4400**)9000/3800**)

b

d1

d2

H

ALUCORE is an aluminium composite panel consisting of two cover sheets and a honeycomb core of aluminium.

Following in the footsteps of the world-wide established ALUCORE trademark, ALUCORE is also a composite material for a variety of applications in transport, architecture or industrial production, showing excellent product properties such as

extraordinary flatness, large variety of colours and high formability.

The aluminium honeycomb core gives the composite panel a high rigid-ity and an extremely low weight. ALUCORE therefore provides the decisive advantage where very high demands are made on the mate-rial for applications such as faade cladding or roofing, e.g. if exposed to extremely high wind load and for large self-supporting roofs.

ALUCOREis the first lightweight panel that you, too, will absolutely insist as being: a bond for life.

Productinformation

The standardcore consists of aluminium foils from AlMn alloys (EN AW 3003). Cell size b: from 6.5 to 9.5 mm.

The coversheets of the ALUCORE panels con-sist of corrosion-resistant Peraluman alloys (AlMg) and may be used in a decorative or functional way, depending on the purpose of application.Structure H: total thickness d1: thickness of AL front sheet d2: thickness of AL back sheet

H

d1

d2

ALUCOREProductRangeThickness Standardwidths Standardlengths6 / 10 / 15 / 20 / 25 mm 1250 / 1500 mm 6250 mm Special width Special length on request 2000 to 9000 mm Standardcolours As per recent colour chartSpecialcolours On request

LoadTablesforPanelThickness6,10and15mm

Criteriafordimensioning: - Calculation by computer programme SOFISTIK - 0.2% proof stress of layers (Rp0.2): EN AW-5005A, H42: 80 N/mm

2

EN AW-5754, H42: 130 N/mm2 - Elastic deflection of supports is restricted to L/150 - Corresponding safety factor (M, F etc.) is to be included in the design load.

*) Max. load increment for suspension of longitudinal sides only **) Smaller value for EN AW-5005A, H42 (Rp0.2 )= 80 N/mm

2

TechnicalData

Thickness: 6mm 10mm 15mm 20mm 25mm Cover sheet thickness, front [mm] 1.0 1.0 Cover sheet thickness, rear [mm] 0.5 1.0 Weight [kg/m2] 4.7 5.0 6.7 7.0 7.3

Technicalproperties: Section modulus W [cm3/m] 2.6 4.6 14.0 19.0 24.0 Rigidity EI [kNcm2/m] 7100 21900 75500 138900 221600 Alloy of Aluminium Layers Peraluman alloy (AlMg) Modulus of Elasticity [N/mm2] 70000 Linear Thermal Expansion 2.4 mm / m at 100 C temperature difference

Surface: Standard lacquering Fluorpolymer (p.e. PVDF) Brilliance (standard) 30 - 80 % Pencil hardness HB - F

AcousticalProperties: Sound Absorption Factor as 0.05 Airborne sound insulation index (acc. to ISO 717-1, ISO 140-3) Rw [dB] 21 21 22 23 25

ThermalProperties: Thermal conductivity* l [W/mK] 0.95 1.35 1.78 2.25 2.70 Thermal resistance R [m2K/W] 0.0063 0.0074 0.0084 0.0089 0.0093 Heat transition coefficient U [W/m2K] 5.67 5.64 5.605 5.59 5.575 Temperature Resistance -40 to +80 C*Depends on the total panel thickness incl. coversheets

ALUCORE-ApprovalsandFireClassification

Country Test accord. to Results / Classification

Germany DIN 4102 Class B1Switzerland VKF Fire regulations Class 5.3 (VKF)France NF P 92-501 M 1Italy CSE RF 1/75/A, RF 3/77 Class 1Denmark DS 1065.1 Class AUK BS 476, Part 6 Index 0 BS 476, Part 7 Class 1 Meets the requirements according to Class 0 of the national building regulationsSingapore Approved for outdoor wall cladding for any type of buildings without limits as to their height

Table1 SuspendedCeilingsDeflectionduetodeadload

Panel size * ALUCORE 6 mm

ALUCORE 10 mm

ALUCORE 15 mm

Width [mm] Length [mm] Deflection [mm] Deflection [mm] Deflection [mm]

*) NOTE:all four sides supported

1000100020003000

0.30.70.8

- -0.20.3

- -- -- -

1250125025003750

0.71.72.1

0.20.60.7

- -0.20.3

1500150030004500

1.63.64.3

0.51.31.5

0.20.50.6

Table2 Windload

Pressure/suction ALUCORE 6 mm ALUCORE 10 mm ALUCORE 15 mm

[kN/m2]

kPa

W = 1250 mm W = 1500 mm W = 1250 mm W = 1500 mm W = 1250 mm W = 1500 mm

L [mm] L [mm] L [mm] L [mm] L [mm] L [mm]

Maximumlength Lof the panel W = 1250 1500

All 4 sidessupported,edges fixed

0.801.001.201.401.601.802.002.202.503.003.504.004.505.005.506.00

9000 9000*)

90009000517544253975323025001875152512751125975875800

900090006375545038253050257522751900150012501100975875800750

900090009000900090009000

9000*)900065003550280022002000180016001400

900090009000

9000*)900090005850440033502370187015601410129011701060

9000900090009000900090009000900090009000900090009000900090009000

9000900090009000900090009000900090009000

9000*)900090009000

9000/4400**)9000/3800**)

b

d1

d2

H

ALUCORE is an aluminium composite panel consisting of two cover sheets and a honeycomb core of aluminium.

Following in the footsteps of the world-wide established ALUCORE trademark, ALUCORE is also a composite material for a variety of applications in transport, architecture or industrial production, showing excellent product properties such as

extraordinary flatness, large variety of colours and high formability.

The aluminium honeycomb core gives the composite panel a high rigid-ity and an extremely low weight. ALUCORE therefore provides the decisive advantage where very high demands are made on the mate-rial for applications such as faade cladding or roofing, e.g. if exposed to extremely high wind load and for large self-supporting roofs.

ALUCOREis the first lightweight panel that you, too, will absolutely insist as being: a bond for life.

Productinformation

The standardcore consists of aluminium foils from AlMn alloys (EN AW 3003). Cell size b: from 6.5 to 9.5 mm.

The coversheets of the ALUCORE panels con-sist of corrosion-resistant Peraluman alloys (AlMg) and may be used in a decorative or functional way, depending on the purpose of application.Structure H: total thickness d1: thickness of AL front sheet d2: thickness of AL back sheet

H

d1

d2

ALUCOREProductRangeThickness Standardwidths Standardlengths6 / 10 / 15 / 20 / 25 mm 1250 / 1500 mm 6250 mm Special width Special length on request 2000 to 9000 mm Standardcolours As per recent colour chartSpecialcolours On request

LoadTablesforPanelThickness6,10and15mm

Criteriafordimensioning: - Calculation by computer programme SOFISTIK - 0.2% proof stress of layers (Rp0.2): EN AW-5005A, H42: 80 N/mm

2

EN AW-5754, H42: 130 N/mm2 - Elastic deflection of supports is restricted to L/150 - Corresponding safety factor (M, F etc.) is to be included in the design load.

*) Max. load increment for suspension of longitudinal sides only **) Smaller value for EN AW-5005A, H42 (Rp0.2 )= 80 N/mm

2

TechnicalData

Thickness: 6mm 10mm 15mm 20mm 25mm Cover sheet thickness, front [mm] 1.0 1.0 Cover sheet thickness, rear [mm] 0.5 1.0 Weight [kg/m2] 4.7 5.0 6.7 7.0 7.3

Technicalproperties: Section modulus W [cm3/m] 2.6 4.6 14.0 19.0 24.0 Rigidity EI [kNcm2/m] 7100 21900 75500 138900 221600 Alloy of Aluminium Layers Peraluman alloy (AlMg) Modulus of Elasticity [N/mm2] 70000 Linear Thermal Expansion 2.4 mm / m at 100 C temperature difference

Surface: Standard lacquering Fluorpolymer (p.e. PVDF) Brilliance (standard) 30 - 80 % Pencil hardness HB - F

AcousticalProperties: Sound Absorption Factor as 0.05 Airborne sound insulation index (acc. to ISO 717-1, ISO 140-3) Rw [dB] 21 21 22 23 25

ThermalProperties: Thermal conductivity* l [W/mK] 0.95 1.35 1.78 2.25 2.70 Thermal resistance R [m2K/W] 0.0063 0.0074 0.0084 0.0089 0.0093 Heat transition coefficient U [W/m2K] 5.67 5.64 5.605 5.59 5.575 Temperature Resistance -40 to +80 C*Depends on the total panel thickness incl. coversheets

ALUCORE-ApprovalsandFireClassification

Country Test accord. to Results / Classification

Germany DIN 4102 Class B1Switzerland VKF Fire regulations Class 5.3 (VKF)France NF P 92-501 M 1Italy CSE RF 1/75/A, RF 3/77 Class 1Denmark DS 1065.1 Class AUK BS 476, Part 6 Index 0 BS 476, Part 7 Class 1 Meets the requirements according to Class 0 of the national building regulationsSingapore Approved for outdoor wall cladding for any type of buildings without limits as to their height

Table1 SuspendedCeilingsDeflectionduetodeadload

Panel size * ALUCORE 6 mm

ALUCORE 10 mm

ALUCORE 15 mm

Width [mm] Length [mm] Deflection [mm] Deflection [mm] Deflection [mm]

*) NOTE:all four sides supported

1000100020003000

0.30.70.8

- -0.20.3

- -- -- -

1250125025003750

0.71.72.1

0.20.60.7

- -0.20.3

1500150030004500

1.63.64.3

0.51.31.5

0.20.50.6

Table2 Windload

Pressure/suction ALUCORE 6 mm ALUCORE 10 mm ALUCORE 15 mm

[kN/m2]

kPa

W = 1250 mm W = 1500 mm W = 1250 mm W = 1500 mm W = 1250 mm W = 1500 mm

L [mm] L [mm] L [mm] L [mm] L [mm] L [mm]

Maximumlength Lof the panel W = 1250 1500

All 4 sidessupported,edges fixed

0.801.001.201.401.601.802.002.202.503.003.504.004.505.005.506.00

9000 9000*)

90009000517544253975323025001875152512751125975875800

900090006375545038253050257522751900150012501100975875800750

900090009000900090009000

9000*)900065003550280022002000180016001400

900090009000

9000*)900090005850440033502370187015601410129011701060

9000900090009000900090009000900090009000900090009000900090009000

9000900090009000900090009000900090009000

9000*)900090009000

9000/4400**)9000/3800**)

b

d1

d2

H

ALUCORE is an aluminium composite panel consisting of two cover sheets and a honeycomb core of aluminium.

Following in the footsteps of the world-wide established ALUCORE trademark, ALUCORE is also a composite material for a variety of applications in transport, architecture or industrial production, showing excellent product properties such as

extraordinary flatness, large variety of colours and high formability.

The aluminium honeycomb core gives the composite panel a high rigid-ity and an extremely low weight. ALUCORE therefore provides the decisive advantage where very high demands are made on the mate-rial for applications such as faade cladding or roofing, e.g. if exposed to extremely high wind load and for large self-supporting roofs.

ALUCOREis the first lightweight panel that you, too, will absolutely insist as being: a bond for life.

Productinformation

The standardcore consists of aluminium foils from AlMn alloys (EN AW 3003). Cell size b: from 6.5 to 9.5 mm.

The coversheets of the ALUCORE panels con-sist of corrosion-resistant Peraluman alloys (AlMg) and may be used in a decorative or functional way, depending on the purpose of application.Structure H: total thickness d1: thickness of AL front sheet d2: thickness of AL back sheet

H

d1

d2

ALUCOREProductRangeThickness Standardwidths Standardlengths6 / 10 / 15 / 20 / 25 mm 1250 / 1500 mm 6250 mm Special width Special length on request 2000 to 9000 mm Standardcolours As per recent colour chartSpecialcolours On request

LoadTablesforPanelThickness6,10and15mm

Criteriafordimensioning: - Calculation by computer programme SOFISTIK - 0.2% proof stress of layers (Rp0.2): EN AW-5005A, H42: 80 N/mm

2

EN AW-5754, H42: 130 N/mm2 - Elastic deflection of supports is restricted to L/150 - Corresponding safety factor (M, F etc.) is to be included in the design load.

*) Max. load increment for suspension of longitudinal sides only **) Smaller value for EN AW-5005A, H42 (Rp0.2 )= 80 N/mm

2

TechnicalData

Thickness: 6mm 10mm 15mm 20mm 25mm Cover sheet thickness, front [mm] 1.0 1.0 Cover sheet thickness, rear [mm] 0.5 1.0 Weight [kg/m2] 4.7 5.0 6.7 7.0 7.3

Technicalproperties: Section modulus W [cm3/m] 2.6 4.6 14.0 19.0 24.0 Rigidity EI [kNcm2/m] 7100 21900 75500 138900 221600 Alloy of Aluminium Layers Peraluman alloy (AlMg) Modulus of Elasticity [N/mm2] 70000 Linear Thermal Expansion 2.4 mm / m at 100 C temperature difference

Surface: Standard lacquering Fluorpolymer (p.e. PVDF) Brilliance (standard) 30 - 80 % Pencil hardness HB - F

AcousticalProperties: Sound Absorption Factor as 0.05 Airborne sound insulation index (acc. to ISO 717-1, ISO 140-3) Rw [dB] 21 21 22 23 25

ThermalProperties: Thermal conductivity* l [W/mK] 0.95 1.35 1.78 2.25 2.70 Thermal resistance R [m2K/W] 0.0063 0.0074 0.0084 0.0089 0.0093 Heat transition coefficient U [W/m2K] 5.67 5.64 5.605 5.59 5.575 Temperature Resistance -40 to +80 C*Depends on the total panel thickness incl. coversheets

ALUCORE-ApprovalsandFireClassification

Country Test accord. to Results / Classification

Germany DIN 4102 Class B1Switzerland VKF Fire regulations Class 5.3 (VKF)France NF P 92-501 M 1Italy CSE RF 1/75/A, RF 3/77 Class 1Denmark DS 1065.1 Class AUK BS 476, Part 6 Index 0 BS 476, Part 7 Class 1 Meets the requirements according to Class 0 of the national building regulationsSingapore Approved for outdoor wall cladding for any type of buildings without limits as to their height

Table1 SuspendedCeilingsDeflectionduetodeadload

Panel size * ALUCORE 6 mm

ALUCORE 10 mm

ALUCORE 15 mm

Width [mm] Length [mm] Deflection [mm] Deflection [mm] Deflection [mm]

*) NOTE:all four sides supported

1000100020003000

0.30.70.8

- -0.20.3

- -- -- -

1250125025003750

0.71.72.1

0.20.60.7

- -0.20.3

1500150030004500

1.63.64.3

0.51.31.5

0.20.50.6

Table2 Windload

Pressure/suction ALUCORE 6 mm ALUCORE 10 mm ALUCORE 15 mm

[kN/m2]

kPa

W = 1250 mm W = 1500 mm W = 1250 mm W = 1500 mm W = 1250 mm W = 1500 mm

L [mm] L [mm] L [mm] L [mm] L [mm] L [mm]

Maximumlength Lof the panel W = 1250 1500

All 4 sidessupported,edges fixed

0.801.001.201.401.601.802.002.202.503.003.504.004.505.005.506.00

9000 9000*)

90009000517544253975323025001875152512751125975875800

900090006375545038253050257522751900150012501100975875800750

900090009000900090009000

9000*)900065003550280022002000180016001400

900090009000

9000*)900090005850440033502370187015601410129011701060

9000900090009000900090009000900090009000900090009000900090009000

9000900090009000900090009000900090009000

9000*)900090009000

9000/4400**)9000/3800**)

Engineers, Architects and Designers appreciate and favour ALUCORE because it combines high mechanical properties, such as the rigidity of the cover sheets, with outstanding aesthetic features. The exclusive production technology in a continuous process enables large size panels up to lengths of 9 m. with superior flatness. Clean, easily fabri-cated with perfect details, a great variety of applications is possible with the use of ordinary tools. Its peculiar characteristics make ALUCORE the ideal choice not only for outdoor applications as facade claddings, roofings, balconies, shelters, etc., but also for interior design like artistic ceilings, etc. With regard to the surface finishing, high-quality lacquering systems with optimum resistance to weather and industrial pollution are used exclusively. These properties are archived by using fluorinated resins. For standard finishes, PVDF-based top lacquers are used. The finished product is tested according to European Coil Coating Association (ECCA).

ALUCORE ALUCOBOND SolidAluminiumRigidity Thickness Weight Thickness Weight Thickness Weight

1250 kNcm2/m 3 mm 4.5 kg/m2 2.7 mm 7.3 kg/m2

2400 kNcm2/m 4 mm 5.5 kg/m2 3.3 mm 8.9 kg/m2

5900 kNcm2/m 6 mm 7.3 kg/m2 4.5 mm 12.2 kg/m2

7100 kNcm2/m 6 mm 4.7 kg/m2 4.8 mm 13.0 kg/m2

21900 kNcm2/m 10 mm 5.0 kg/m2 7.0 mm 18.9 kg/m2

75500 kNcm2/m 15 mm 6.7 kg/m2 10.5 mm 28.4 kg/m2

138900 kNcm2/m 20 mm 7.0 kg/m2 13.0 mm 35.1 kg/m2

221600 kNcm2/m 25 mm 7.3 kg/m2 15.2 mm 41.0 kg/m2

clamped / screwed with edge sections for vertical panel layout

With pilaster sectionWith double top-hat sectionsclamped / screwed for vertical panel layout

clamped / screwed with visible edge sections Vertical / horizontal panel layout

Prin

ted

in G

erm

any

GB

- 01/

11/0

8

Honeycombcompositepanelsforarchitecturalapplications

ALUCOREHoneycombcompositepanelsforarchitecturemorethanjustawallcladding

ALUCOREConstructionexamples

Core

Adhesive

Coversheet

ALUCOREis an aluminium composite panel consisting of two cover sheets and a honeycomb core of aluminium.

Clean, easily fabricated with perfect details, a great variety of applications is possible with the use of ordinary tools. Its particular characteristics make ALUCORE the ideal choice not only for outdoor applications such as faade cladding, roofing, balconies, shelters, etc., but also for interior design like artistic ceilings, etc..

In addition to its low weight and perfect flatness, ALUCORE shows excellent weathering resistance. With regard to the surface finishing, high-quality lacquering systems with optimum resistance to weather and industrial pollution are used exclusively.

3A Composites GmbHD-78224 Singen, GermanyTel. +49 (0) 7731 80 23 47info.eu@alucobond.comwww. alucobond.com

Engineers, Architects and Designers appreciate and favour ALUCORE because it combines high mechanical properties, such as the rigidity of the cover sheets, with outstanding aesthetic features. The exclusive production technology in a continuous process enables large size panels up to lengths of 9 m. with superior flatness. Clean, easily fabri-cated with perfect details, a great variety of applications is possible with the use of ordinary tools. Its peculiar characteristics make ALUCORE the ideal choice not only for outdoor applications as facade claddings, roofings, balconies, shelters, etc., but also for interior design like artistic ceilings, etc. With regard to the surface finishing, high-quality lacquering systems with optimum resistance to weather and industrial pollution are used exclusively. These properties are archived by using fluorinated resins. For standard finishes, PVDF-based top lacquers are used. The finished product is tested according to European Coil Coating Association (ECCA).

ALUCORE ALUCOBOND SolidAluminiumRigidity Thickness Weight Thickness Weight Thickness Weight

1250 kNcm2/m 3 mm 4.5 kg/m2 2.7 mm 7.3 kg/m2

2400 kNcm2/m 4 mm 5.5 kg/m2 3.3 mm 8.9 kg/m2

5900 kNcm2/m 6 mm 7.3 kg/m2 4.5 mm 12.2 kg/m2

7100 kNcm2/m 6 mm 4.7 kg/m2 4.8 mm 13.0 kg/m2

21900 kNcm2/m 10 mm 5.0 kg/m2 7.0 mm 18.9 kg/m2

75500 kNcm2/m 15 mm 6.7 kg/m2 10.5 mm 28.4 kg/m2

138900 kNcm2/m 20 mm 7.0 kg/m2 13.0 mm 35.1 kg/m2

221600 kNcm2/m 25 mm 7.3 kg/m2 15.2 mm 41.0 kg/m2

clamped / screwed with edge sections for vertical panel layout

With pilaster sectionWith double top-hat sectionsclamped / screwed for vertical panel layout

clamped / screwed with visible edge sections Vertical / horizontal panel layout

Prin

ted

in G

erm

any

GB

- 01/

11/0

8

Honeycombcompositepanelsforarchitecturalapplications

ALUCOREHoneycombcompositepanelsforarchitecturemorethanjustawallcladding

ALUCOREConstructionexamples

Core

Adhesive

Coversheet

ALUCOREis an aluminium composite panel consisting of two cover sheets and a honeycomb core of aluminium.

Clean, easily fabricated with perfect details, a great variety of applications is possible with the use of ordinary tools. Its particular characteristics make ALUCORE the ideal choice not only for outdoor applications such as faade cladding, roofing, balconies, shelters, etc., but also for interior design like artistic ceilings, etc..

In addition to its low weight and perfect flatness, ALUCORE shows excellent weathering resistance. With regard to the surface finishing, high-quality lacquering systems with optimum resistance to weather and industrial pollution are used exclusively.

3A Composites GmbHD-78224 Singen, GermanyTel. +49 (0) 7731 80 23 47info.eu@alucobond.comwww. alucobond.com