Embed Size (px)
Citation preview
ALTECH ENGINEERING COMPANY
DESIGNERS, BUILDERS OF CUSTOM MACHINERY SINCE 1964
THE ‘NEW’
Visit us at: www.altech-eng.com
FRICTION FORMULATION & RECIPES
Visit us at: www.altech-eng.com
Mixer for Wet andDry Friction Formulations
Process Implementation Technology & Know How
ALTECH ENGINEERING COMPANYTHE ‘N
EW’
800 Litre and Up Capacity Mixers
BRAKE LINING TECHNOLOGY
Visit us at: www.altech-eng.com
Rolling Mill for ShoeBrake Linings
ALTECH ENGINEERING COMPANYTHE ‘N
EW’
Output 80 Feet Per Minute
PREFORM MACHINES
Visit us at: www.altech-eng.com
170 – 250 Ton, Dual Layer I.M.Preforms and/or Truck Blockand Segment Preforms
70 and 100 Ton Single andDual Layer Preforms
ALTECH ENGINEERING COMPANYTHE ‘N
EW’
MULTIPLE DAYLIGHT CURE PRESSES
Visit us at: www.altech-eng.com
400 Ton I.M. Parts Curing
600 and 800 TonTruck Block andSegment Curing
ALTECH ENGINEERING COMPANYTHE ‘N
EW’
GRINDING SLOTTING & CHAMFER MACHINES
Visit us at: www.altech-eng.com
Grinding I.M. Parts
Grinding Truck Blocksand Segments
ALTECH ENGINEERING COMPANYTHE ‘N
EW’
Inside Outside Grinder for Linings
DRILLING MACHINES
Visit us at: www.altech-eng.com
Drilling for Riveted Disc Pads
Drilling Truck Blocksand Segment
ALTECH ENGINEERING COMPANYTHE ‘N
EW’
HORIZONTAL AND VERTICAL PRESSES
Visit us at: www.altech-eng.com
HYDRAULIC PRESSES200, 250, 400 and 600 TON WITH CYCLE TIMES BETTER THAN 60 STROKES PER MINUTE
ALTECH ENGINEERING COMPANYTHE ‘N
EW’
Small footprint Press
LOW COST (1200 PPM) PRODUCTION CELLS
Visit us at: www.altech-eng.com
FLASH MOLDING I.M. PRODUCTION CELL COMPRISING:
• 800-LITER MIXER• TWO PREFORM MACHINES• TWO CURE PRESS MACHINES• ONE GRINDER, CHAMFER, SLOTTER MACHINE • ONE PAINT LINE, PAINT CURING AND MARKING
ALTECH ENGINEERING COMPANYTHE ‘N
EW’
• 800-LITER MIXER• TWO POSITIVE MOLDING MACHINES• ONE GRINDER, SLOTTER MACHINE (CHAMFER OPTIONAL) • ONE PAINT LINE, PAINT CURING AND MARKING
PRODUCTION 1200 PARTS PER HOUR
POSITIVE MOLDING I.M. PRODUCTION CELL COMPRISING:
PROCESS IMPLEMENTATION TECHNOLOGY
Visit us at: www.altech-eng.com
ALTECH ENGINEERING COMPANYTHE ‘N
EW’
HYDRAULIC POWER UNIT
C414PM PRESS
PUSH BUTTON STATION
EIDM1 – EXTRACTION, INSERTION, & DE-MOLDING
TRANSFER MOLD OUTER
DW1 – DUAL WEIGH SYSTEM
TRANSFER MOLD INNER
FRICTION MATERIAL HOPPER
COOLING SECTION
CURE SECTION
PC1 – POST CURE OVEN
GS2 – DISC BRAKE PAD FINISHING CELLCONVEYOR FOR
INNERS/OUTERS
S8 MARKING SYSTEM
CP1 – POWERED BRUSH
Positive Molding System
ALTECH SUPPORT SERVICES
Visit us at: www.altech-eng.com
• OPERATOR FLASH MOLDING PRODUCTION CELL TRAINING
• OPERATOR POSITIVE MOLDING PRODUCTION CELL TRAINING
ALTECH ENGINEERING COMPANYTHE ‘N
EW’
Don’t wait for Service…
Get Altech for all your support needs
INFORMATION TECHNOLOGY
Visit us at: www.altech-eng.com
ALTECH ENGINEERING COMPANYTHE ‘N
EW’
ALL ALTECH SYSTEMS MAY BESUPPLIED WITH ETHERNET CONNECTIONS
FOR DATA ACQUISITION & REMOTE DIAGNOSTICS
