August 25, 2009

Re: Alpha 560A Series - Radio Control Quote

Dear ,

Ace Industries is pleased to provide the following pricing and specifications for your review.

Alpha 560A Radio Control and Installation.…………………………………………………………………………………………….$ X,XXX.XX

Price includes all necessary parts and labor for the installation of the following:

· (1) Alpha 560A radio remote control system w/ spare transmitter

· (1) Toggle switch for pendant/radio selection

Description: System includes one (1) receiver and two (2) transmitters. Transmitters are equipped with six (6) two-speed pushbuttons (+) one (1) AUX micro-button and are powered by (2) AA Alkaline batteries for 150 hours of continuous operation. A warning device, such as a strobe light or gong, must be installed to comply with OSHA 1910.179(i).

Transmitter Specifications:

Frequency Range: 301 & 433MHzChannel Spacking: 25KHzTransmitting Range: 250~300 FeetFrequency Control: Quartz CrystalTransmitting Power: 0.3mWEnclosure Rating: IP-66Source Voltage: 3.0V ("AA" x 2)Operating Temp.: 14ﾟF ~ +158ﾟFDimension: 6.8 x 2.6 x 1.3 (inch)Weight: 8.5 oz (with batteries)

Receiver Specifications:

Modulation: Narrow Band FMDecoding Reference: Quartz CrystalFrequency Control: Synthesizer (PLL)Responding Time: 40mSOutput Contact: 250V @10AEnclosure Rating: IP-65 / IP-66Source Voltage: AC 24V~440V availableOperating Temp.: 14ﾟF ~ +158ﾟFDimension: 12.2 x 5.3 x 2.8 (inch)Weight: 4.0 lb. (w/ output cable)

Option 1: MICROSTROBE® Warning Light (40 Candela - 1.75 Joules/Flash) and Installation……..…..…………$ XXX.XX*

Option 2: Multi-Tone Warning Horn (120Db in 1 meter) and Installation………………………………..………………$ XXX.XX*

Option 3: Multi-Tone Horn & Strobe Combo Unit and Installation…………………………………………………………$ XXX.XX*- Horn Sound Output: 79 – 88 dBA @ 10 ft. / Microstrobe Flash Intensity: 40 Candela @ 1.75 Joules/Flash

*Customer shall specify adequate warning device, or combination of devices, for area of operation. Customer shall also verify adequate light intensity and/or horn decibel rating for area of operation.

Quote Validity:

 All quotes are valid for thirty (30) business days from the date of issuance.  Orders placed after the thirty (30) day window may be subject to pricing increases. 

Terms & Conditions:

· Tax:Not Included

· Freight:Not Included

· Payment:Net 30 days

All orders subject to Ace Industries Standard Terms and Conditions

· Customer shall maintain a safe work area around work site during installation of cranes and runways.

· Customers supplying lifts and/or mobile equipment shall be held liable for the appropriate capacities and safety of all supplied equipment.

· Design and specification of adequate warning devices for the equipment shall be the responsibility of the customer.

· If electrical service is not available when the installation is completed and a return trip is required to start-up and test the crane, the trip will be invoiced at our standard service rate plus mileage and per diem if required.

· Cancellations or Returns: All products included on this quote are considered custom and are not returnable. Any orders cancelled prior to order completion will be subject to a cancellation charge including all costs incurred up to the point of cancellation.

· All orders become effective upon acceptance at the corporate headquarters of Ace Industries. All quoted prices expire thirty (30) days from the quote date. No quotation is effective unless signed by an authorized representative of Ace Industries, Inc. No modifications or additional conditions, whether written or oral, will be binding on Ace Industries, Inc. unless agreed to in writing and signed by an authorized representative of Ace Industries, Inc.

· All of the information contained in this proposal is confidential and has been prepared for your exclusive use in considering the purchase of the equipment described herein. Transmission of any part of this information or use for other reasons than those described above is prohibited without written consent from Ace Industries, Inc.

Thank you for the opportunity to provide this pricing for your review. Should you have any questions or require further information, please do not hesitate to call.

Regards,

Ace Industries, Inc.