Embed Size (px)
Citation preview
The ALP Series is a two roller Peristaltic pump designed to handle abrasive slurries, viscous fluids, and aggressive chemicals that are normally difficult to pump with other types of positive displacement technologies. The ALP Series is an ideal choice for metering, batching and transfer applications. Peristaltic pumps are becoming the standard for hard to handle fluids such as Sodium Hypochlorite that off-gas and vapor-lock diaphragm pumps.
Five models are available that offers a wide range of flow rate outputs. Newer hose materials offer better chemical resistance and longer life in demanding applications.
ALP CONTROLLER The controller mounts on a wall or panel away from harsh chemicals. The rugged NEMA 4X motor drive controller is easy to program and extremely reliable.
PE
RIS
TA
LTIC
PU
MP
S
ALP SERIESINDUSTRIAL HOSE PUMPSDesigned to meet the demanding requirements of chemical injection, dispensing and transfer applications.
• Flows to 40 GPM, Pressures to 60 psi.• Viscosities to 10,000 cps.• Fluid temperatures to 180º F.• Seal-less pumping technology.• Self-priming suction lifts to 20ft vertical.• No check valves - few moving parts. • Dry running without damage.
ALP FEATURES• Non-lubricant filled roller design.• Compact vertical gearbox designs available. • Remote wall mounted controller with bright LED display & integral keypad. • Hose barb, NPT, Flanged and Tri-clamp process connections available.
An optional tubing rupture detector will automatically shut down the pump and signal an alarm in the event of a tubing leak. The Tubing Rupture Detector helps to protect operators and other equipment from potentially dangerous fumes and chemicals.
SAFETY FIRST
FLOMOTION SYSTEMS Inc. 165 Creekside Drive, Suite 112 Buffalo NY 14228-2103 Tel: 716-691-3941 Fax: 716-691-1253 Email: [email protected] www.flomotionsystems.com
© COPYRIGHT 2013 FLOMOTION SYSTEMS INC. PGS CS2 022513
FLOMOTION ALP SERIES ENGINEERING SPECIFICATIONS
DIMENSIONS
DIMENSIONS in inches
ALP13 ALP17 ALP25 ALP30 ALP45G 8.5 12.2 17.4 22.5 28.6N 7.7 9.3 19.0 25.8 30.8P 8.0 11.6 16.2 21.9 26.5
ALP13 / ALP17ALP25 / ALP30 / ALP45
G N
P
G N
P
PUMP SPECIFICATIONS
ALP13 ALP17 ALP25 ALP30 ALP45Flow Rate GPM (max) 1.0 2.5 6.0 14.0 40Discharge Pressure (psi)* 60 60 60 60 60Suction Lift (ft) 10 14 16 20 20Horsepower (max) 1/4 1/3 3/4 2 3Weight (lbs)** 10 20 40 95 185
* Pressure rating dependent on tubing material. **Not including gearbox and motor.
MATERIALS OF CONSTRUCTION• Pumphead - Cast aluminum• Cover - Lexan • Roller Assembly - Electro plated steel• Rollers - Nylatron• Finish - Two part epoxy• Mounting Base - Galvanized Aluminum
AVAILABLE HOSE MATERIAL• Natural Rubber• EPDM• Buna N• Norprene • Tygoprene• Nitrile• Silicone
ALP CONTROLLER• Wall mount with LED display • Integral 6 button keypad• Selectable manual or automatic control via 0-10 VDC or 4-20 mA• Remote start/stop capabilities• Forward/Reverse capability• 4-20mA speed output signal• NEMA 4X enclosure • 115 VAC input, 230VAC 3-phase opt• Optional RS-485/MODBUS • Optional Integral Power Disconnect
ALP Controller
