ALUMINIUM GRILLE MODULES GROUP 3

DEFINITION

• IT IS AN OPENING OF SEVERAL SLITS SIDE BY SIDE IN A SMALL OR SEVERAL SHEETS TO LET AIR OR WATER, IN OR OUT AND TO KEEP LARGER OBJECTS OR ANIMALS OUT.

• GRILLE MODULES ARE LIKE STANDARD BLOCKS OF GRILLS WHICH IS SCREWED TOGETHER TO FORM A SURFACE BUT NOT WELDED.

TYPES OF GRILLE MODULES

NEATDEK FLAT BAR

N-I BAR

SERRATED FLAT BAR SERRATED N-I BAR

LOUVREDEK BRISE SOLEIL

QUALITIES OF GRILLE MODULES LIGHTWEIGHT • One third the weight of steel, aluminium is light • and easy to handle, so it saves on manpower ENVIRONMENTALLY FRIENDLY • 100% recyclable with no downgrading of its • properties and very little energy required for • re-melting MAINTENANCE FREE • Saves on manpower EASY ON THE EYE • Aluminium’s aesthetically pleasing properties can • be further enhanced with coating or anodisation NON TOXIC • Aluminium is an inert metal, completely • impermeable NON COMBUSTIBLE • Aluminium does not burn or aid combustion

APPLICATIONS

• SCREENING:

SOLAR SHADING

STAGING

BRIDGE/PATH WAYS

ROOF ACCESS WALKWAY

VENTILLATION GRILLES

PANEL TERMINOLOGY Load-Bearing Bar :The load-bearing member spanning between supports.

Swage Bar: A square bar that passes through the load-bearing bar that is swage locked at right angles to the load-bearing bars providing lateral restraint.

Length: The overall dimensions of a flooring panel measured parallel to the load-bearing bars.

Width: The overall dimension of panel measured at right angles to the load-bearing bars.

FIXING DETAILS

Fixing system comprise several parts:

A. bolt in 304 grade stainless steel

B. bottom securing clamp in stainless steel

C. square nut in stainless steel

D. hole drilled using jig E. saddle clamp in

aluminium alloy

DETAIL DRAWING LOUVERS:

BRISE SOLEIL