All the training gear you need - SEW‑EURODRIVE · 2020-03-02 · 02 All the training gear you need Dear SEW Customers, Are your employees equipped to cope with the various issues

All the training gear you need

Course Guide

SEW-EURODRIVE - Driving the world

02


Dear SEW Customers,

Are your employees equipped to cope with the various issues posed by drive technology in their workplace? SEW-EURODRIVE, through its DriveAcademy® offers a comprehensive selection of training programs in Australia. These programs have been developed to help all customers and distributors maximise our products and services. Training programs developed by SEW’s DriveAcademy® are designed to provide an overall better understanding of how SEW-EURODRIVE products can be best used in various applications, as well as more in-depth knowledge of specific products. These courses enable you and your staff to get the best possible preparation and end result out of the products used in your specific industry.

By using the same training facilities and models that we use to train our own staff, our courses provide hands-on experience, while limited class sizes guarantee the personal attention you deserve. Courses are offered at any one of our SEW-EURODRIVE DriveAcademy® centres across Australia or alternatively they can be held by request on-site.

For a complete up-to-date calendar of courses offered please visit our website www.sew-eurodrive.com.au or alternatively you can speak to a member of our sales team who will gladly provide assistance in choosing the most appropriate course for you and/or your staff.

We look forward to helping you reach your true potential.

Yours Sincerely,

Nick Lobianco Michael Stranieri

General Manager Technical Training Manager SEW-EURODRIVE Pty Ltd SEW-EURODRIVE Pty Ltd

Training

SEW-EURODRIVE, through its DriveAcademy® offer comprehensive training programs in Australia.These programs have been developed to help our customers maximise the use of our products and services.Place your trust in this seal of quality.


03

http://www.sew-eurodrive.com.au

04

TopicsTraining – your place or ours?

Training Courses developed by SEW-EURODRIVE’s DriveAcademy® are designed to enable your employees to get the

best possible preparation for their day to day work with training that includes many practical exercises in addition to

the necessary theoretical fundamentals. You can choose the venue where training is held, whether it is on-site or at

any of our DriveAcademy® centres across the Australia.

Proximity to our customers is important to us, so to avoid any long journeys we offer scheduled courses in Melbourne,

Sydney, Brisbane and on request in Perth and Adelaide.

Optimum learning environment

The training courses at SEW-EURODRIVE’s DriveAcademy® are ideally suited for hands-on experience. Multifunctional training

models enable the participants to be optimally prepared for the tasks and problems they will encounter in their daily work, along

with experimental facilities help to provide clarity to all questions in a practical way.

Prerequisites for onsite Training

More often than not training takes place at SEW-EURODRIVE’S DriveAcademy® facility, although we can also hold training at your

premises on request. A training room with the below prerequisites will be required:

- Sufficient room size for participants and training models

- Projector and screen

- Whiteboard

- Depending on the demo units 1x240V or 3x415V, 10 A sockets are required

- Sufficient outlets for training models and laptops

SEW Products

SEW Product Range & Concepts 7

MOVIDRIVE®

MOVIDRIVE B® - Maintenance & Troubleshooting 8

MOVIDRIVE B® - Operation, Start-up & Troubleshooting 8

IPOSPlus Assembler 9

IPOSPlus Compiler 9

MOVITRAC®

MOVITRAC® B - Operation, Start-up & Troubleshooting 10

MOVITRAC® LTP-B - Operation, Start-up & Troubleshooting 10

MOVITRAC® LTE-B - Operation, Start-up & Troubleshooting 11

MOVIPLC®

MOVIPLC® - Introduction to Multimotion 11

MOVIPLC® - Introduction to CCU 12

DOP® 11C & HMIBuilder.PRO 12

Decentralised Drive Systems

MOVIMOT® - Operation, Start-up & Troubleshooting 13

MOVIFIT® - Operation, Start-up & Troubleshooting 13

MOVIGEAR®- Operation, Start-up & Troubleshooting 14

AS-Interface and SEW Decentralised Technology 14

MOVIAXIS®

MOVIAXIS® - Maintenance & Troubleshooting 15

Other

Introduction to Workbench 15

Selection & Project Planning of SEW Gearmotors 16

05

Duration

1 day

06

SEW Product Range and Concepts

SEW Product Range and Concepts

Topics- Overview of the history of SEW-EURODRIVE, SEW company profile & summary of

SEW operations in Australia- Overview of all the SEW Gear units including basic functionality of a gear unit,

design, purpose, ratio & concept of a geared motor - Overview of all the SEW AC electric motors including theory of an electric motor - Overview of all the SEW Frequency inverters including theory of how an inverter

works & why they are used - Overview of SEW Servo Technology - Overview of SEW Decentralised Technology including examples of MOVIGEAR®

installations - Overview of SEW Control Technology - Overview of Industrial Gears including examples of IG installations

Learning Goals- Familiarisation with some of the history of SEW EURODRIVE, be able to identify

what SEW ‘does‘ within the industry and know the basic operations of SEW around Australia

- Awareness of the SEW product catalogue, know the names of the different units and products

Target Groups- Anyone who is interested in the complete SEW product rangects

07

Dates and contents of individual training programs are available on the internet at www.sew-eurodrive.com.aui

Duration

1 day

Duration

2 days

Duration

2 days

08

MOVIDRIVE®

MOVIDRIVE® B – Maintenance & Troubleshooting

Topics- Overview of the basic technical data for MOVIDRIVE® B - Wiring and startup of MOVIDRIVE® B - Using SEW software packages for motor startup, basic parameter settings

and data backups- Basic fault diagnostics with key drive & application faults & using SCOPE to

record data channels

Learning Goals- Know the technical data for the MOVIDRIVE® B - Use MOTIONSTUDIO and MT Manager to communicate with MOVIDRIVE® B - Startup a motor in the VFC and CFC operating modes & Servo modes- Save data with PC and keypad and upload it to the inverter- Understand the tasks required for troubleshooting basic faults for all key

components of a drive system – inverter, motor, brakes, encoders, application

Target Groups- Employees who work with the inverter as maintenance staff/engineers/

electricians without necessarily needing to know how to program the unit

MOVIDRIVE® B – Operation, Start-up & Troubleshooting

Topics- Basic technical data for MOVIDRIVE® B - Wiring and startup of MOVIDRIVE® B - Commissioning inverters via SEW software packages- Startup of different operating modes for motor control- Data backup with PC and keypad- Key parameter settings- Using DBG60B keypad- Extensive fault diagnostics with key drive & application faults, steps to prevent

faults and procedures for troubleshooting, analysis and rectification of faults including all key components of the drive system

- Using SCOPE to record data channels- SEW fieldbus profile with EtherNet/IP, EtherCAT or Profibus - Using SEW fieldbus diagnostic tools- Introduction to Application Modules

Learning Goals- Know the technical data for the MOVIDRIVE® B - Use MOTIONSTUDIO and MT Manager to communicate with MOVIDRIVE® B - Startup a motor in the VFC and CFC operating modes & Servo modes- Save data with PC and keypad and upload it to the inverter- Understand the tasks required for troubleshooting faults for all key components

of a drive system – inverter, motor, brakes, encoders, application- Control the inverter via fieldbus

Target Groups- Employees who work extensively with the inverter i.e. maintenance staff/engineers

and electricians

09


Topics:- Introduction to IPOSplus® positioning and sequence control platform- Overview of C Compiler programming language including SEW standard functions- Exercises ranging from performing reference travel to basic programming to

expanding the program to table positioning and touch probe - Using interrupt commands for faults and timers- Tasks and example programs for both IO and fieldbus- Communication with MOVILINK and SCOM commands

Learning Goals:- Program IPOSplus® in the programming language compiler and assembler- Understand the difference between the programming languages- Perform various different reference travel operations- Perform absolute and relative positioning and use other SEW specific functions- Structure and comment IPOSplus® programs

Target Groups- Programmers and system integrators who use the programming functionality

of the MOVIDRIVE®/MOVITRAC® for positioning and/or logical operations

IPOSplus® Assembler & Compiler

Duration

1 day

Duration

1 day

Duration

1 day

Duration

3 days

11


MOVITRAC®

MOVIPLC®

MOVITRAC® LTE-B Operation, Start-up & Troubleshooting

Topics- Basic properties and technical data for MOVITRAC® LTE-B- Wiring and start-up of MOVITRAC® LTE-B- Commissioning of inverters via Keypad & SEW software- Data backup with PC and parameter module- Fault diagnostics- SEW fieldbus profile with EtherNet/IP, EtherCAT or PROFIBUS

Learning Goals- Know the technical data for the MOVITRAC® LTE-B- Use the integrated operating panel, parameter module & LTShell software to

upload, download, perform motor start-ups and set parameters- Understand the tasks required for troubleshooting faults for all key components

of a drive system – inverter, motor, brakes, application- Control the inverter via fieldbus

Target Group- Employees who work extensively with the inverter as maintenance

staff/engineers/electricians

MOVIPLC® – Introduction to MultiMotion

Topics- Overview of MOVIPLC®

- Introduction of MultiMotion concept with MOVIPLC®

- Startup with SEW frequency inverter & MOVIPLC®

- Introdution to PLC editor software- MultiMotion basic functions – velocity, jog, position, tracking and referencing modes- MultiMotion advanced functions – camming, gearing, interpolation and touch probe

modes- Programming examples of all functions using with PLC editor- Implementation of MultiMotion program with IO and fieldbus

Learning Goals- Understanding and familiarity of SEW MOVIPLC® & options- Understanding of MultiMotion concept- Understanding of all possible modes and functions, implementation of global

variables, diagnostic tools and PLCeditor programming platform

Target Group- PLC programmers who are involved with the MOVI-PLC®

10

MOVITRAC®

MOVITRAC® B Operation, Start-up & Troubleshooting

Topics- Basic properties and technical data for MOVITRAC® B- Wiring and start-up of MOVITRAC® B- Commissioning of inverters via FBG Keypad & SEW software- Data backup with PC and keypad- Fault diagnostics with SCOPE function- SEW fieldbus profile with EtherNet/IP, EtherCAT or PROFIBUS

Learning Goals- Know the technical data for the MOVITRAC® B- Use the integrated operating panel & MOVITOOLS MotionStudio to upload,

download, perform motor start-ups and set parameters- Understand the tasks required for troubleshooting faults for all key components


Target group- Employees who work extensively with the inverter as maintenance


MOVITRAC® LTP-B Operation, Start-up & Troubleshooting

Topics- Basic properties and technical data for MOVITRAC® LTP-B- Wiring and start-up of MOVITRAC® LTP-B- Commissioning of inverters via Keypad & SEW software- Data backup with PC and parameter module- Fault diagnostics- SEW fieldbus profile with EtherNet/IP, EtherCAT or PROFIBUS

Learning Goals- Know the technical data for the MOVITRAC® LTP-B- Use the integrated operating panel, parameter module & LTShell software to

upload, download, perform motor start-ups and set parameters- Understand the tasks required for troubleshooting faults for all key components


Target Group- Employees who work extensively with the inverter as maintenance staff/engineers/

electricians

Duration

2 days

Duration

1 day

Duration

2 daysDuration

1 day

13


MOVIMOT® Operation, Start-up & Troubleshooting

Topics- Technical data and design of the MOVIMOT® drive unit- Converting of an asynchronous motor into a MOVIMOT® drive unit plus start-up- Operating of MOVIMOT® with different operating modes and control options- Diagnostics of MOVIMOT®

- Technical data, design and start-up of the fieldbus communication- Control of MOVIMOT® via fieldbus, monitoring and control via fieldbus monitor

Learning Goals- Understand the features and techinical data of SEW decentralised systems- Wire and start-up MOVIMOT® drive systems- Use different interfaces and control options for MOVIMOT®

- Diagnose and analyse faults quickly and reliably - Operate field distributors for fieldbus control for the MOVIMOT®



MOVIFIT® Operation, Start-up & Troubleshooting

Topics- Basic properties and technical data for MOVIFIT® FC- Wiring and start-up for MOVIFIT® FC- Commissioning of inverters with easy mode (DIP switches) & expert mode

(MOVITOOLS MotionStudio)- Data backup with keypad & PC- Fault diagnostics- Fieldbus Communications

Learning Goals- Know the technical data for the MOVIFIT® FC- Understand the wiring of MOVIFIT® FC- Perform a start-up of the MOVIFIT® FC in both easy and expert mode- Use the DBG60B keypad & MOVITOOLS MotionStudio to upload, download,

perform motor start-ups and set parameters whilst in expert mode- Understand the tasks required for troubleshooting faults for all key components

of a drive system – inverter, motor, brakes, application- Identifying the fieldbus unit profile used with MOVIFIT®



12

MOVIPLC® – Introduction to CCU

Topics- Overview of MOVIPLC®/CCU- Overview of all available application modules- Startup with SEW frequency inverter & MOVIPLC®/CCU- Introdution to Application Configurator software- Overview and operation of single axis application modules: Velocity Control (1, 2,

3, 4, 6 PD), Bus Positioning (6PD), Rapid/Creep Positioning (4PD), Univeral Module (4-10PD), transparacy mode (3-10PD)

- Overview and operation of multi axis application modules: Universal Technology, effiSRS & CCU kinematics

- Overview and operation of function modules: Brake Diagnostics- Data backup and controller replacement

Learning Goals- Understanding and familiarity of SEW MOVIPLC® & options - Understanding of Configurable Control Unit (CCU) concept - Understanding of all possible modes and functions, implementation of global

variables, diagnostic tools and Application Configurator platform

Target group - PLC programmers who are involved with the MOVI-PLC

Decentralised Drive Systems

DOP11C® & HMIBuilder.PRO

Topics- Presentation of DOP®11C variants- Beginners Programming with HMI Builder.PRO operating software- Creating tags, elements, buttons, pictures, screens, trend viewers, alarms,

recipies, internal tags, security settings, Data exchange, triggers, index registers, audit trails

- Communication between SEW Inverter, SEW Controller and DOP®11C via RS-485 & EtherNet & usage of different drivers: Modbus, CoDeSys, OPC and subrouting via SEW Controller

- Performing backups of projects- Creating basic scripts

Learning Goals- Understand the different DOP®11C variants- Program with HMI Builder.PRO software- Operate and program the operator panel

Target group- Employees who wish to program the SEW HMI for connection to SEW inverters

and motion controllers

MOVIPLC®

Duration

1 day

Duration

1 day

Duration

1 day

Duration

1 day

14

MOVIGEAR® MOVIAXIS®

OTHER

MOVIGEAR® Operation, Start-up & Troubleshooting

Topics- Technical features and data of the MOVIGEAR® mechatronic system- Technical features and data of external controllers for MOVIGEAR® including

fieldbus gateways and MOVIFIT® FDC SNI- Wiring of MOVIGEAR® and system components- Practical operation of of MOVIGEAR DBC, MOVIGEAR® DAC with AS-interface

master, MOVIGEAR® DSC with fieldbus gateway, MOVIGEAR® SNI & MOVIGEAR® DSC with MOVIFIT® FDC & CCU application modules

Learning Goals- Identify the different variants & key technical data of MOVIGEAR®

- Understand the different possibilities of control technology to control different MOVIGEAR® variants

- Understand the wiring of MOVIGEAR® variants & system components- Understanding of the requirements in operating different MOVIGEAR® variants

under different application requirements

Target Group- Employees who work extensively with the inverter as maintenance - staff/engineers/electricians

AS-Interface and SEW Decentralised Technology

Topics- Technical data and design of all relevant AS-interface SEW decentralised products

(MOVIMOT®, MOVISWITCH®, MOVIGEAR®)- Establishing communications between AS-interface master and SEW units- Operation of single and double slave modules- Operation of Function modules- Operation of parameter channel with double slaves

Learning Goals- Understand the features and techinical data of SEW decentralised systems- Wire and start-up AS-interface devices- Be able to operate equivalent AS-interface masters in conjunction with

SEW devices

Target group- Employees who work extensively with AS-interface as maintenance


15

MOVIAXIS® Maintenance & Troubleshooting

Topics- Overview and wiring of MOVIAXIS®

- Establishing communications with MOVIAXIS® via Ethernet, USB and CAN (SBus)- Initial startup without optimisation & Drive optimisation for the speed controller - Using the single axis positioning technology function - Using the MOVIPLC/CCU/UFx in combination with MOVIAXIS® including functionality

& backup methods- Basic fault diagnostics with key drive & application faults- Using SCOPE to record data channels

Learning Goals- Understanding of the structure of the MOVIAXIS® including all options- Using MOVITOOLS MotionStudio to communicate with MOVIAXIS®

- Performing a startup & optimisation of MOVIAXIS® for servo & closed loop asynchronous motors

- Understand the tasks required for troubleshooting basic faults for all key components of a drive system – inverter, motor, brakes, encoders, application

Target group - Employees who work with the inverter as maintenance staff/engineers/electricians

without necessarily needing to know how to program the unit

Introduction to Workbench

Topics- Overview of all the functions within workbench- Manual selections of key components (frequency inverters, geared motors,

servos, decentralised technology)

Learning Goals- To understand the basic functions of workbench to be used as an electronic

catalogue for all SEW products

Target group- Employees who are involved with the selection process of SEW components

Duration

2 days

16


Selection and Project Planning of SEW Gearmotors

Topics- Overview of relevant project planning documentation & steps required for project

planning for both uncontrolled and controlled applications- Examples of calculation of thermal utilisation based on starting frequency and

thermal characteristic - Calculation of chain conveyor by hand- Using workbench to calculate other applications (hoists, travel drives)

Learning Goals- Understand the basics of non-controlled and controlled project planning including

requirements for typical applications- Be able to select drives and drive components using the catalogue (manually and

electronically)- Understand the user interface and the operation of SEW Workbench- Understand the procedure of selecting a drive with workbench, from starting the

project planning tool to assembling a complete package

Target Group- Employees who are involved with the selection process of geared motors for

applications

17


RegistrationWe request early registration in writing. The sales and delivery terms and conditions of SEW-EURODRIVE Pty Ltd are bindingly accepted upon registration.

CancellationCancellation must occur in writing. Cancellation of a confirmed registration can occur free of charge up to 4 weeks before the start of the training. 50% of the participation fee may be invoiced where cancellation occurs a week before the start of the training.

Training Contents- Training course- Training Documentation- Lunch, snacks and drinks

Fee*The training fee is listed in the schedule. This must be paid once the invoice has been received. SEW-EURODRIVE’s general delivery business terms and conditions apply to the payment of the seminar fee. Customised training may incur additional fees.

DiscountsIf several employees of the same company take part in the same company take part in the same training from the training brochure, the following discounts apply:2 participants: 5%3 participants: 10%4 participants: 15%

Exclusion of liability Technical information in the training and training documents are provided by us to the best of our knowledge. However, we do not assume liability for any mistakes in the technical information imparted verbally or in writing in the training or contained in the training documents provided. Equally, we cannot accept liability for any damage and follow-on damage resulting from mistakes. This exclusion of liability does not apply in cases of compulsory liability for intent or gross negligence.

Subject to changeWe reserve the right to make the following changes:Training cancellations; claims for compensation or cancellation damages may not arise there from. Adjustment of training content in line with the current state of the art, without prior notification. In individual cases, this may lead to differences from the training descriptions.

*Costs per training and per participant plus GST

Information

Training times1 day 8:30-4:30pm2 days+ 8:30-4:30pmThe last training day ends early at 4pm

Safety regulationsTraining participants agree to adhere, particularly during the practice exercises, the safety and accident prevention regulations in force on the SEW-EURODRIVE operation premises. In the case of training on-site with the customer, participants will adhere to the customer specific safety and accident prevention regulations. Furthermore, the on-site safety briefing instructions are to be followed.

CopyrightThe reproduction of course documents for unauthorized purposes as well as the distribution, exploitation and communication of their content to the third parties is not allowed. Infringements are subject to compensation. The software provided by SEW-EURODRIVE during training for the purpose of exercises may not be removed, or copied in part or whole, or used in any other, unauthorized way.

Places of jurisdictionThe place of jurisdiction is Melbourne

Course terms and conditionsOTHER


SEW-EURODRIVE PTY LTD27 Beverage Drive (PO Box 59)Tullamarine VIC 3043Phone: (03) 9933 [email protected]

SEW-EURODRIVEDriving the world

Documents

All the training gear you need - SEW‑EURODRIVE · 2020-03-02 · 02 All the training gear you need Dear SEW Customers, Are your employees equipped to cope with the various issues