• Sizes 3/4” to 63“ IPS / DIPS Where Applicable• All Con�gurations• Ends: Available, But Not Limited To: - Butt Fusion - Socket Fusion - Flanged - Ductile & Stainless Backing Rings - Compression• Mechanical Joint• Electrofusion• Dual Containment• Structures & Headers• Pulled Tees

FABRICATED FITTINGS• IPS• DIPS• Compression• Electrofusion - - Fittings & Couplings 1/2” to 63” • SIDR• Mechanical Joint Adapters• Socket Fusion - Transition Fittings• Flange Adapters • Sweep (Conduit Style) Bends

MOLDED FITTINGS

HDPESOLUTIONSHDPESOLUTIONS

• Sizes 1/8” to 60”• All Con�gurations• Ends: Available, But Not Limited To: - Solvent Weld Bell - Gasket Bell - Flanged - Plain End• Dual Containment• Structures & Headers• Sweep (Conduit Style) Bends• Valves• Full Fiberglass Shop For Fitting Reinforcement• Pipe Perforation• Sanded Manhole Adapters

FABRICATED FITTINGS• SCH40-SCH80• SCH80 CPVC• SCH40 DWV• SCH40 & SCH80 Clear• SDR21 Gasket• C907 Gasket• SDR35 - Solvent Weld & Gasket• SDR26 Heavy Wall - Solvent Weld & Gasket

MOLDED FITTINGS

FITTINGS FOR:• IPS• PIP• Sewer• C900 / C905• Profile Pipe (Corrugated PVC) - Including Every Brand & Size Presently Made - Open / Closed Profile

PVCSOLUTIONSPVCSOLUTIONS

*CSA Approved Fittings limited to: 4”-48” Solvent Weld/Gasketed SDR35 Sewer and SDR26 Heavy Wall Sewer.

*

N

W E

SSpecified Fittings

Visit us at: www.specifiedfittings.com

Warehouses in :Kearney, NE • Longwood, FL

Preston, ID • Lubbock, TX

Washington Location164 W. Smith Rd. | Bellingham, WA 98226-9616

360-398-7700 | 360-398-7051 Fax

Montana Location483 Airport Rd. | Stevensville, MT 59870-6363

406-777-3466 | 406-777-7181 Fax

Mexico800-429-1705 Toll Free

800-574-1075 Fax

High Quality

We Make You Look Good! Competitively Priced Solutions for Your Needs

One Stop for “Hassle Free” Quotes—PVC & HDPE

Custom Designed Fittings by Our In-House CAD Techs

Huge Inventory of Fabricated & Molded Fittings

Fast: On-Time Production, Short Lead Times

Featuring the most comprehensive

inventory of stock items in the

industry!

“”

(406)777-3466 (360)398-7700

Both Pressure and Non-Pressure!

Added Bene�ts of Choosing Speci�ed Fittings: Over 20 years of well-established manufacturing capabilities. Extraordinary �exibility in what and how much we can produce. One of the few companies in North America that produce HDPE Solid Wall and PVC �ttings in both Corrugated and Solid Wall. Broad-based product line including injection-molded sewer, C907, SDR21 Gasketed, SCH40|80|80CPVC, PVC DWV, and HDPE available. We have two factories producing parts 24 hours a day, located in Bellingham, Washington and Stevensville, Montana. We distribute parts from our factory locations as well as four strategically located regional warehouses. We have a comprehensive set of illustrated catalogs available on CD or downloadable from our website at www.speci�ed�ttings.com.

Contact our friendly customer service sta� for helpful information on sizes and availability along with useful technical information. We are available Monday through Friday, 6:00 AM to 5:00 PM PST at our PVC Facility (360-398-7700) or 6:00 AM to 5:00 PM MST at our HDPE faclity (406-777-3466).

Visit us at: www.specifiedfittings.com

Warehouses in the Following Locations:Kearney, NE • Longwood, FL

Preston, ID • Lubbock, TX

Washington Location164 W. Smith Rd. | Bellingham, WA 98226-9616

360-398-7700 | 360-398-7051 Fax

Montana Location483 Airport Rd. | Stevensville, MT 59870-6363

406-777-3466 | 406-777-7181 Fax

Mexico800-429-1705 Toll Free

800-574-1075 Fax

C900/C905/C907 *Drain BasinsGated - SurfaceHeat & AirHDPEIndustrial DuctIPSIPSPerma-Loc™PIPMetric Sized FittingsPolyethylenePolypropylenePVDFPro-21™/Vylon™SewerUltra-Corr-21™/A2000™Ultra-Rib™ValvesYelomine™/Certa-Lok™

4”-48”6”-48”6”-12”6”-20”3/4”-63”4”-24”1/8”-24”1/8”-24”15”-48”4”-48”6mm-150mm1/2”-63”1-1/2”-4”1-1/2”-16”21”-60”3”-48”4”-48”6”-30”1/8”-24”2”-16”

DR51-DR14PVC-HDPESDR102SDR81SDR6.3-SDR32.5PVC-CPVCSCH40/80/120 in PVC-CPVCSDR64-SDR17M304/F794SDR102-SDR21Pressure & Non-PressureDR5-32.5 IPS-DIPS-CTS-SIDRSR45-SR150SR45-SR150F794SDR35/F679-SDR26/35F794/F949M304/F794SCH40-80/PIP/C900/SDR35/Pro�leIPS/C900

Gasketed, Solvent Weld, FlangedGasketed, Solvent Weld, FlangedGasketed, Solvent WeldSolvent WeldButt/Socket/Electro-fusion, FlangedSolvent Weld, FlangedGasketed, Solvent Weld, FlangedGasketed, Solvent Weld, FlangedGasketedGasketed, Solvent Weld, FlangedGasketed, Solvent Weld, FlangedButt/Socket/Electro-fusion, FlangedButt Fusion Welded, FlangedButt Fusion Welded, FlangedGasketedGasketed, Solvent Weld, FlangedGasketed, FlangedGasketed (IPEX, J-M Eagle, Kor-Flo™, etc.)Gasketed, Solvent Weld, FlangedGasketed, Grooved

* Bulldog™, Diamond Lok-21™, J-M Eagle Loc™ internal restraint systems available in 4”-24” where applicable.

Category Diameter Class Con�guration

HDPE: (406)777-3466 PVC: (360)398-7700