a division
FomI/6G.ClCaI.Cerl-35!Rev.OI/[)aled-21/09/2011 pagel oj :*** END
OF REPORT *
Uncertainty of Measurement: O. 6 prn / 0.6 urn
iApplied Indicated Deviation Applied Indicated Deviation
urn IJm 1- ~m 11m ~m - 1- urn -0.00 0.0 0.00 250.7 249 -1.724.33
25.0 0.67 506.0 506 0.0
-
51.70 50.0 -1.70 989.1 987 -2.179.30 78.0 -1.30 1474.8 1470
-4.8127.6 128 0.4 - - -
Maximum Deviation: -4.8 pm.__
Universal Length Measuring Machine, Serial No. 1329, Certificate
No. LAT 220 5140501 MI(Calibrated by ACCREDIAAccredited laboratory,
traceable to Italian National Calibration System,
Italy)Traceability Statement:All measuring equipments used for
calibration purposes is traceable back to international/national
Standardsthrough UKASor other recognized accreditation bodies which
provides traceability of measurement toNational Physical Laboratory
or other recognized standards Laboratory.Uncertainty Statement:-
The uncertainty reported is based on a standard uncertainty
multiplied by acoverage factor k=2, providing a level of confidence
of approximately 95%.Calibration Result
o to 1600 urn0.1 ~m/ 1 urn
NF 14740Serial No.RangeReadabilityEnvironmental
ConditionsTemperature/Humidity 222 C/ 5510% RHWork Procedure:
GTS/WP/35 (Based On BS EN 150-2808)Test equipment usedDefelsko
Thickness Standards Certificate No. GCLC-2058-07/2014
Recommended Due on March 6, 2016Description of Instrument under
testType Coating Thickness GaugeManufacturer HcometerModel No. 456
CFBS
GCLC/2015-1530-01GCLC/RQj2015-1530March 5, 2015March 8,
2015MEHTA HARDWARE,SHARJAH,UAEMarch 7, 2015
Certificate NumberCalibration Request No.Received DateDate of
IssueCustomer Name & AddressCalibration Date
CERTIFICATE OF CALIBRATION
ISO/lEe 17025 AccreditedCalibration laboratoryPhone
:06-5436933
Fax: 06-5437077E-Mall:[email protected]:
www.generaltechuae.com
General Const. lab ffj ~~I dJ : i .;_,o ~,~ oHLa....1
J...4~,Aj'I:litlll'i~' TOTAL SOLUTION FOR INDUSTRIAL AUTOMATION AND
CALIBRATION SERVICESP.DBox 25898 SharjahUnited Arab Emirates
NPSCN001.pdf (p.1)
