4
Alcatel OneTouch Pop Icon Interior Back Panel Replacement Prerequisite guide for Back Camera, Headphone Jack and Control buttons Written By: John Halsey Alcatel OneTouch Pop Icon Interior Back Panel Replacement © iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 4

Alcatel OneTouch Pop Icon Interior Back Panel Replacement

  • Upload
    others

  • View
    3

  • Download
    0

Embed Size (px)

Citation preview

Alcatel OneTouch Pop Icon Interior Back Panel ReplacementPrerequisite guide for Back Camera, Headphone Jack and Control buttons
Written By: John Halsey
INTRODUCTION
The interior back panel is required to gain access to most of the components of the phone. It isn't hard but you will need to be careful when removing the screws because they are small and easy to loose.
TOOLS: iFixit Opening Tools (1)
JIS Driver Set (1)
Shut down the device



Use your thumbnail to lift the battery from the phone.
Alcatel OneTouch Pop Icon Interior Back Panel Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 4
To reassemble your device, follow these instructions in reverse order.
This document was last generated on 2017-06-23 05:27:10 AM.
Step 3 — Interior Back Panel


Step 4


Written By: John Halsey
Step 4